Search NASA⌕ Search

SEARCH · Search NASA

Results for “REFLECTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Climatologically tuned reflectivity-rain rate relations and links to area-time integrals

An effort is made to determine relationships between reflectivity (Z) and rain rate (R) which are tuned to the local climatology. The development of such relations was motivated by the need to understand the role of precipitation in controlling general circulation and in affecting such phenomena as ENSO. Attention is given to methods of deriving such relations and how they are linked to area integral rainfall measurements. In essence, the relation is tuned so that the probability distribution of reflectivity, P(Z), replicates that of R over some predetermined space-time climatic domain. Thus, the accurate measurement of the average R over any smaller domain depends on how closely the sampled P(Z) approximates the climatic P(Z). The probability matching method used is a modification of the approach of Calheiros and Zawadzki (1987) and Rosenfeld (1980). The technique is applied to data from Germany and the eastern tropical Atlantic (GATE).

Atlas, David↗

Electron acceleration at nearly perpendicular collisionless shocks. II - Reflection at curved shocks

Test particle simulations by Krauss-Varban et al. (1989), carried out for plane shocks, have confirmed previous results of Wu (1984) and Leroy and Mangeney (1984) that electrons can be effectively accelerated at nearly perpendicular shocks. This paper investigates the reflection and acceleration of electrons at a nearly perpendicular shock, using two-dimensional test-particle calculations which account for the effect of shock curvature. The computations show that reflected electron fluxes are of the order of observed fluxes. For several reasons, the combined effects of shock curvature are far less severe than anticipated.

Krauss-Varban, D.↗

Combined use of visible, reflected infrared, and thermal infrared images for mapping Hawaiian lava flows

The weathering of Hawaiian basalts is accompanied by chemical and physical changes of the surfaces. These changes have been mapped using remote sensing data from the visible and reflected infrared and thermal infrared wavelength regions. They are related to the physical breakdown of surface chill coats, the development and erosion of silica coatings, the oxidation of mafic minerals, and the development of vegetation cover. These effects show systematic behavior with age and can be mapped using the image data and related to relative ages of pahoehoe and aa flows. The thermal data are sensitive to silica rind development and fine structure of the scene; the reflectance data show the degree of oxidation and differentiate vegetation from aa and cinders. Together, data from the two wavelength regions show more than either separately. The combined data potentially provide a powerful tool for mapping basalt flows in arid to semiarid volcanic environments.

Abrams, Michael↗

Modeling the reflectance spectrum of Callisto 0.25 to 4.1 microns

Models employing Hapke's (1981) radiative transfer theory are presented for the 0.2-4.1 micron reflectance spectrum. A simultaneous intimate, as well as aereal, mixture solution of ice and dark material is envisioned, in order to satisfy both absorption band depths and reflectance levels. The models indicate that the surface's ice component is rather large-grained, and that the major spectral features above about 2.5 microns cannot be accounted for by the ice. Spectra obtained for the nonice material were similar to each other; their absorption features resemble hydrated silicates bearing both oxidation states of iron.

Calvin, Wendy M.↗

Ion reflection and transmission during reconnection at the earth's subsolar magnetopause

Composition measurements in an accelerated flow event at the earth's dayside magnetopause show evidence for reflection and transmission of magnetospheric and magnetosheath ion species. Furthermore, a single velocity transformation approximately tangent to the magnetopause surface orders the individual transmitted and reflected ion distributions on both sides of the magnetopause into field-aligned flow at V(A), the local Alfven speed. These observations provide strong evidence for a kinetic description of magnetic reconnection at the magnetopause.

Fuselier, S. A.↗

Compton reflection in active galactic nuclei and the cosmic X-ray background

This paper discusses further the model of Fabian et al. (1990) for the cosmic X-ray background (XRB) spectrum, in which the emission is due to AGNs at large redshifts. Each AGN emits a power-law spectrum modified by Compton reflection from cold gas. It is found that the model provides an excellent fit to the XRB from 3 to 500 keV if the sources radiate from a maximum redshift of at least 3.75, if their comoving emissivity varies like (1 + z) exp beta, with beta between 1.8 and 3.3, and if the intrinsic power-law energy index is between 0.9 and 1.2. About 90 percent of the power-law radiation in each AGN must be processed by Compton reflection. The model predicts that the intensity of the XRB below 3 keV is significantly above that extrapolated from observations above 3 keV, without requiring contributions from other types of source.

Rogers, R. D.↗

Determination of the optical thickness and effective particle radius of clouds from reflected solar radiation measurements. II - Marine stratocumulus observations

A multispectral scanning radiometer has been used to obtain measurements of the reflection function of marine stratocumulus clouds at 0.75 micron and at 1.65 and 2.16 microns. These observations were obtained from the NASA ER-2 aircraft as part of the FIRE, conducted off the coast of southern California during July 1987. Multispectral images of the reflection function were used to derive the optical thickness and the effective particle radius of stratiform cloud layers on four days. In addition to the radiation measurements, in situ microphysical measurements were obtained from an aircraft. In this paper, the remote sensing results are compared with in situ observations, which show a good spatial correlation for both optical thickness and effective radius. These comparisons further show systematic differences between remote sensing and in situ values, with a tendency for remote sensing to overestimate the effective radius by about 2-3 microns, independent of particle radius. The optical thickness, in contrast, is somewhat overestimated for small optical thicknesses and underestimated for large optical thicknesses. An introduction of enhanced gaseous absorption at a wavelength of 2.16 microns successfully explains some of these observed discrepancies.

Nakajima, Teruyuki↗

Venus - Concentrations of radar-reflective minerals by wind

The effectiveness of wind in concentrating minerals with high radar reflectiveness on the surface of Venus is investigated experimentally in the Venus Wind Tunnel (Greeley et al., 1984) under CO2 densities typical of Venusian conditions. Density sorting of sand particles during the formation of microdunes is demonstrated, and calculations show that wind-blown deposits of dense conductive material such as ilmenite need to be only a few cm thick to account for the local enhancements of radar reflectivity observed by Pioneer Venus at wavelength 17 cm.

Greeley, Ronald↗

Detection of target distance in the presence of an interfering reflection using a frequency-stepped double side-band suppressed carrier microwave radar system

A technique for detecting the distance to a highly reflective target in the presence of an interesting reflection using a frequency-stepped double-sideband suppressed carrier (DSBSC) microwave-millimeter-wave radar system is analytically derived. The main result of the analysis shows that the measured group delays produced by the DSBSC system possess a periodicity inversely proportional to the difference between the time delays to the target and interferer, independent of the signal-to-interference ratio (SIR). Simulation results are presented in the context of electron plasma density range estimation using a block diagram communications CAD tool. A unique and accurate plasma model is introduced. A high-resolution spectral estimation technique based on an autoregressive time series analysis is applied to the measured group delays, and it is shown that accurate target distance estimates may be obtained, independent of SIR.

Ybarra, Gary A.↗

Reflectance spectra from eutrophic Mono Lake California, measured with the Airborne Visible and Infrared Imaging Spectrometer (AVIRIS)

An AVIRIS image was obtained for Mono Lake, California, on May 26, 1989, a day with excellent visibility. Atmospherically-corrected reflectance spectra derived from the image indicate a spectral signature for chlorophyll a, the dominant photosynthetic pigment in the phytoplankton of the lake. Chlorophyll a concentrations in the lake were about 22 mg/cu m, and the upwelling radiance was low with a peak reflectance at about 570 nm of about 5 percent. Coherent noise appeared in the image as regular variations of 0.1 to 0.2 microwatts/sq cm per str oriented diagonally to the flight line. A simple ratio of two spectral bands removed the conspicuous undulations, but modifications of the shielding within the instrument are needed to improve the signal especially over dark targets such as lakes.

Melack, John M.↗

The mid-infrared biconical reflectance of thin films on highly oriented pyrolytic graphite

Measurements are reported of the biconical reflectance of pyrolytic graphite in the spectral region between 4000 and 600/cm. The measurements are conducted with an FTIR spctrometer with the beam focused to a 1-mm-diam focal point on the sample surface. The highly oriented pyrolytic graphite has a high biconical reflectance as compared to other graphitic materials and does not cause significant beam scattering.

Anderson, M. S.↗

A reflection-type oil-film skin-friction meter

Unlike many conventional methods of measuring skin-friction, the oil-film method is absolute in nature, requires no calibration, and, in principle, can be universally applied. In all existing forms of the meter, however, interferometry is used to make measurements of the oil film. Here, the technique has been simplified by completely eliminating interferometry. This has been achieved by making direct and dynamic measurements of the oil-film slope by directing a reflected beam of light off the top of the oil film to a small position sensing photodiode. The reflection method has been verified in incompressible flat plate turbulent boundary-layers. The standard of deviation of the measurements is about 10 percent of the mean. The present version of the meter is compact and simple.

Bandyopadhyay, P. R.↗

Effects of grain size and shape in modeling reflectance spectra of mineral mixtures

The effects of grain size and shape on the reflectance spectra of mineral mixtures are investigated to improve a reflectance model called the isograin model, whose prototype was proposed by M. Kinoshita in 1985. The sample powder was assumed to consist of an infinite number of layers, each of which has the same thickness with the grain size d.

Hiroi, T.↗

Vegetation Canopies and Objects of Arbitrary Shapes: Computer Generation and Bidirectional Reflectance Calculations

A general computer graphics based model is presented for computer generation of objects of arbitrary shape and for calculating Bidirectional Reflectance Factor (BRF) and scattering from them, in the optical region. The computer generation uses a modified Lindemayer system (L system) approach. For rendering on a computer screen, the object is divided into polygons, and innovative computer graphics techniques are used to display the object and to calculate the scattering and reflectance from the object. The use of the technique is illustrated with scattering from canopies of simulated corn plants and from a snow covered mountain. The scattering is quantified using measures like BRF and albedo and by rendering the objects with brightness of each of the two facets of a polygon proportional to the amount of light scattered from the object in the viewer's direction.

Goel, Narenda S.↗

Telerobotic hand controller study of force reflection with position control mode

To gain further information about the effectiveness of kinesthetic force feedback or force reflection in position control mode for a telerobot, two Space Station related tasks were performed by eight subjects with and without the use of force reflection. Both time and subjective responses were measured. No differences due to force were found, however, other differences were found, e.g., gender. Comparisons of these results with other studies are discussed.

Willshire, Kelli F.↗

An analysis of combustion studies in shock expansion tunnels and reflected shock tunnels

The effect of initial nonequilibrium dissociated air constituents on the combustion of hydrogen in high-speed flows for a simulated Mach 17 flight condition was investigated by analyzing the results of comparative combustion experiments performed in a reflected shock tunnel test gas and in a shock expansion tunnel test gas. The results were analyzed and interpreted with a one-dimensional quasi-three-stream combustor code that includes finite rate combustion chemistry. The results of this study indicate that the combustion process is kinetically controlled in the experiments in both tunnels and the presence of the nonequilibrium partially dissociated oxygen in the reflected shock tunnel enhances the combustion. Methods of compensating for the effect of dissociated oxygen are discussed.

Jachimowski, Casimir J.↗

High temperature fiber optic microphone having a pressure-sensing reflective membrane under tensile stress

A fiber optic microphone is provided for measuring fluctuating pressures. An optical fiber probe having at least one transmitting fiber for transmitting light to a pressure-sensing membrane and at least one receiving fiber for receiving light reflected from a stretched membrane is provided. The pressure-sensing membrane may be stretched for high frequency response. Further, a reflecting surface of the pressure-sensing membrane may have dimensions which substantially correspond to dimensions of a cross section of the optical fiber probe. Further, the fiber optic microphone can be made of materials for use in high temperature environments, for example greater than 1000 F. A fiber optic probe is also provided with a backplate for damping membrane motion. The backplate further provides a means for on-line calibration of the microphone.

Zuckerwar, Allan J.↗

How well is Martian ozone inferred with reflectance spectroscopy?

The Mariner 9 UV spectrometer scanned from 2100 to 3500 Angstroms in one of its two spectral channels every 3 seconds with a spectral resolution of 15 Angstroms and an effective field-of-view of approximately 300 km(exp 2). The only gaseous absorption in the 2000 to 3000 Angstrom region was assumed to come from the Hartley band system of ozone, and therefore the amount of ozone was inferred by fitting this absorption feature with laboratory data of ozone absorption. Mars O3 as inferred from these spectra shows strong seasonal and latitudinal variation, with column abundances ranging from 0.2 microns at equatorial latitudes to 60 microns over the northern winter polar latitudes. The detectability limit of the spectrometer was approximately 3 microns. I use a radiative transfer model based on the discrete ordinate method to calculate synthetic radiance spectra. When typical amounts of dust and cloud are present, significant underestimation of O3 occurs. A factor of 3 times as much O3 is needed to generate the same spectrum for cloudy, dusty atmospheres as for a clear atmosphere. If the scattering properties of Martian clouds and dust were well known, then their appearance would not be a problem, as a model would be capable of retrieving the O3 abundance. However, these properties are not well known, which raises doubts about the effectiveness of the current UV spectroscopy technique used to measure O3. Spatial and temporal variability in temperature and water vapor have been claimed to account for the scatter of the data points. However, water vapor is a small source of odd hydrogen in the winter polar atmosphere, and may not account for most of the variability. Masking by clouds and dust may also account for some of the observed O3 variability, because the nature and opacity of the clouds and dust in the polar hood change dramatically in latitude and even on a day-to-day basis. As the maximum O3 abundance resides near the surface, spacecraft must be able to observe through the entire cloud and dust abundance in order to actually see the total O3 column abundance. If reflectance spectroscopy is used, as on Mariner 9, then the cloud and the airborne dust must be traversed twice; first by the incoming solar flux down to the surface, and then once again upon reflection from the surface out to the spacecraft.

Lindner, Bernhard Lee↗