Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRESS DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Develop and Connect TRISO Failure Analysis and Uncertainty Quantification to Fission Product Release Calculation Capability

The U.S. Department of Energy’s Nuclear Energy Advanced Modeling and Simulation (NEAMS) program aims to develop predictive capabilities by applying computational methods to the analysis and design of advanced reactor and fuel cycle systems. This program has been providing engineering-scale support for the development of BISON, a high-fidelity and high-resolution fuel performance tool. Stress-based failure probability has been developed and analyzed to assess the integrity of tri-structural isotropic (TRISO) fuel particles during fuel life cycles. While simple, stress-based approaches to failure probability leveraging the Weibull statistical distribution entails a number of drawbacks when stress concentration occurs near crack tips, including finite element mesh size dependency. In this report, we use an interaction integral approach to the computation of stress intensity factors in functionally graded materials (FGM) for axisymmetric models. The inner pyrolytic carbon (IPyC) cracking induced silicon carbide (SiC) failure is one of the dominated failure modes in TRISO failure analysis. In this study, we consider a crack in the IPyC layer perpendicular to the SiC layer. The interface between these two TRISO layers is considered to be porous, which we simulate considering a transition of mechanical properties over the porous length. These aspects are considered in the computation of stress intensity factor (SIF) from a fracture mechanics approach and compared with the known stress-based failure probability approach.

42 ENGINEERING↗

Fluid flow and heat convection studies for actively cooled airframes

This report details progress made on the jet impingement - liquid crystal - digital imaging experiment. With the design phase complete, the experiment is currently in the construction phase. In order to reach this phase two design related issues were resolved. The first issue was to determine NASP leading edge active cooling design parameters. Meetings were arranged with personnel at SAIC International, Torrance, CA in order to obtain recent publications that characterized expected leading edge heat fluxes as well as other details of NASP operating conditions. The information in these publications was used to estimate minimum and maximum jet Reynolds numbers needed to accomplish the required leading edge cooling, and to determine the parameters of the experiment. The details of this analysis are shown in Appendix A. One of the concerns for the NASP design is that of thermal stress due to large surface temperature gradients. Using a series of circular jets to cool the leading edge will cause a non-uniform temperature distribution and potentially large thermal stresses. Therefore it was decided to explore the feasibility of using a slot jet to cool the leading edge. The literature contains many investigations into circular jet heat transfer but few investigations of slot jet heat transfer. The first experiments will be done on circular jets impinging on a fiat plate and results compared to previously published data to establish the accuracy of the method. Subsequent experiments will be slot jets impinging on full scale models of the NASP leading edge. Table 1 shows the range of parameters to be explored. Next a preliminary design of the experiment was done. Previous papers which used a similar experimental technique were studied and elements of those experiments adapted to the jet impingement study. Trade-off studies were conducted to determine which design was the least expensive, easy to construct, and easy to use. Once the final design was settled, vendors were contacted to verify that equipment could be obtained to meet our specifications. Much of the equipment required to complete the construction of the experiment has been ordered or received. The material status list is shown in Appendix B.

Mills, A. F.↗

New approaches to an old problem: addressing spatial gaps in the World Stress Map

Abstract A well-recognized characteristic of the World Stress Map (WSM) database is the continued presence of large spatial gaps in the distribution of the data records despite the more than 40-year development history of the database. The current release has more than 30 000 high-quality (A–C) data records (often referred to as ‘stress indicators’), but while some continental areas (such as Australia) have seen a significant increase in spatial converge with the latest release, other continental regions (Africa, central Asia, most of South America) remain markedly sparse. In this contribution we (1) review the current state of the spatial distribution of stress indicators in the continental regions (above sea-level); (2) quantify the clustering of the stress indicators in the latest WSM release using the Hopkins statistic as a way to explore the current spatial distribution of the indicators and assess future WSM releases; and (3) present three approaches (joint inversion, seismic anisotropy and InSAR) that provide a way to fill in the gaps (both in the S Hmax orientation and principal stress magnitudes) in regions that lack active seismicity and where borehole drilling is cost prohibitive. These three approaches have the potential to guide procedures for improving a priori estimates of the ambient stress field in the Earth's crust and reduce the uncertainty in predicting both the magnitude and orientation of the principal tectonic stresses.

58 GEOSCIENCES↗

Terrestrial Spaceflight Analogs: Antarctica

Alterations in immune cell distribution and function, circadian misalignment, stress and latent viral reactivation appear to persist during Antarctic winterover at Concordia Station. Some of these changes are similar to those observed in Astronauts, either during or immediately following spaceflight. Others are unique to the Concordia analog. Based on some initial immune data and environmental conditions, Concordia winterover may be an appropriate analog for some flight-associated immune system changes and mission stress effects. An ongoing smaller control study at Neumayer III will address the influence of the hypoxic variable. Changes were observed in the peripheral blood leukocyte distribution consistent with immune mobilization, and similar to those observed during spaceflight. Alterations in cytokine production profiles were observed during winterover that are distinct from those observed during spaceflight, but potentially consistent with those observed during persistent hypobaric hypoxia. The reactivation of latent herpesviruses was observed during overwinter/isolation, that is consistently associated with dysregulation in immune function.

Crucian, Brian↗

Operational Efficiency Evaluation of a Setup for Removing Stresses in the Steam Header of PGV-1000 Steam Generator

The effectiveness of a setup for removing stresses in the steam header of a PGV-1000 steam generator is evaluated. The evaluation is based on an investigation of the stress state by means of magnetic anisotropy measurements performed in the zone of the No. 111 weld seam of the hot header of steam generators operating in one of the power-generating units with a V-320 series reactor arrangement. Inspections made it possible to obtain cartograms of the distribution of the difference of the principal mechanical stresses along the perimeter of the weld connection of a PGV-1000 header equipped with a cooling mantle and headers without such a mantle. By means of statistical analysis of the data, a diagram of the distribution of the principal mechanical stresses was obtained. In addition, the distribution of the standard deviation of the principal mechanical stresses as a measure of the dispersion of a random quantity relative to its mathematical expectation was determined.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Constraints on the depth and geometry of the magma chamber of the Olympus Mons Volcano, Mars

The summit caldera of the Olympus Mons volcano exhibits one of the clearest examples of tectonic processes associated with shield volcanism on Mars. The radial distance from the center of the transition from concentric ridges to concentric graben within the oldest crater provides a constraint on the geometry and depth of the subsurface magmatic reservoir at the time of subsidence. Here, researchers use this constraint to investigate the size, shape, and depth of the reservoir. Their approach consists of calculating radial surface stresses corresponding to the range of subsurface pressure distributions representing an evacuating magma chamber. They then compare stress patterns to the observed radial positions of concentric ridges and graben. The problem is solved by employing the finite element approach using the program TECTON.

Zuber, Maria T.↗

Task Group 7B: Cellular and Molecular Mechanisms of Biological Aging: The Roles of Nature, Nurture and Chance in the Maintenance of Human Healthspan

The degree to which an individual organism maintains healthspan and lifespan is a function of complex interactions between genetic inheritance ('nature'), environment, including cultural inheritance (nurture) and stochastic events ('luck' or 'chance'). This task group will focus upon the role of chance because it is so poorly understood and because it appears to be of major importance in the determination of individual variations in healthspan and lifespan within species. The major factor determining variations in healthspan and lifespan between species is genetic inheritance. Broader aspects of cellular and molecular mechanisms of biological aging will also be considered, given their importance for understanding the cellular and molecular basis of successful aging. The task force will consider the cellular and molecular basis for nature, nurture and chance in healthspan and life span determination. On the basis of comparisons between identical and non-identical twins, geneticists have estimated that genes control no more than about a quarter of the inter-individual differences in lifespan (Herskind 1996). Twin studies of very old individuals, however, show substantially greater genetic contributions to Healthspan (McClearn 2004; Reed 2003). The environment clearly plays an important role in the length and the quality of life. Tobacco smoke, for example has the potential to impact upon multiple body systems in ways that appear to accelerate the rates at which those systems age (Bernhard 2007). To document the role of chance events on aging, one must rigorously control both the genetic composition of an organism and its environment. This has been done to a remarkable degree in a species of nematodes, Caenorhabditis elegans (Vanfleteren 1998). The results confirm hundreds of previous studies with a wide range of species, especially those with inbred rodents housed under apparently identical but less well controlled environments. One observes wide variations in lifespan in all these studies. For the C. elegans experiments, the distributions of lifespan fit best with two parameter or three parameter logistic models and not with the classical Gompertz model nor the Weibull model. Many mutations have been shown to substantially increase lifespan in C. elegans. It is of interest, however, that the ranges of the lifespan variations among such mutant strains overlap with those of wild type strains (Kirkwood 2002). Many of these long-lived mutant strains exhibit enhanced resistance to a variety of stressors, notably heat shock. It was therefore predicted that variable degrees of response to heat shock stress might form a basis, or a partial basis, for individual variations in longevity. An initial set of experiments demonstrated that is indeed the case, at least for a transgenic construct that includes the promoter of a small heat shock gene (Rea 2005). There was a very strong correlation between the response to a heat stress and longevity, with good responding worms living longer. Strikingly, this phenotype was not heritable. The progeny of a worm showing a strong heat stress reaction exhibited the broad distribution of lifespans shown by the starting population. The heat stress reaction was therefore stochastic. The nature of the chance events that determine the reaction remains unknown. They could be related to the intrinsic instability of the transgene, making it important to repeat such experiments utilizing endogenous genes as reporters of the response to heat shock and other stressors. It could be due to epigenetic drifts in gene expression, perhaps involving random changes in gene promoters or in the state of chemical modifications to histone proteins that coat chromosomes. Such changes have indeed been observed in aging human identical twins (Fraga 2005). While those changes have been interpreted as being driven by the environment, one cannot at present rule out random variations unrelated to environmental influences. Variations in gene expression in genetically identical organisms examined under environmentally identical conditions have also been attributable to intrinsic 'noise' in fundamental molecular processes such as the transcription and translation of genes. Most such observations have been made using microorganisms (Elowitz 2002), but stochastic bursts of transcription have also been noted in mammalian cells (Raj 2006). Moreover, substantial variation in the levels at which genes are transcribed have shown to occur in mouse tissues, and that variation was shown to increase with age (Bahar 2006). Chance events are also of major significance in the determination of diseases of aging. For the case of cancer, mutations have been shown to be of major importance. A likely key to malignancy, however, is the chance event of suffering a mutation in a gene which, when mutated, now greatly enhances the general frequency of mutation.

60 APPLIED LIFE SCIENCES↗

Use of Simple Continuum Solutions in Finite Element Alternating Method for Fracture Problems

The performance of the finite element alternating (FEAM) method for two-dimensional crack problems is studied with respect to a polynomial pressure distribution fitted to the crack face stresses. The FEAM alternates between the analytical solution of crack in an infinite plate subjected to arbitrary polynomial distribution and a finite element solution of an uncracked body to satisfy the required boundary conditions in the crack problem. In this paper, the FEAM is applied to embedded crack and edge crack problems. For embedded crack problems, all of the constant, linear, and quadratic ( N=0,1, or 2, respectively) pressure distributions yield very accurate results with this algorithm with 4 to 5 iterations. The edge crack problems, on the other hand, require much higher order polynomials distributions (N=5 to 6) to yield accurate solutions. For slant edge crack problems, the mode-I stress-intensity factors have better accuracy than the mode-II stress-intensity factors for the same convergence tolerance.

Krishnamurthy, T.↗

Dynamic Bellows for a Pulse Tube Cryocooler Application

Electrified aircraft propulsion systems will require powertrain components that are both lightweight and highly efficient. NASA’s 1.4 MW High Efficiency Megawatt Motor (HEMM) has been designed to run at 6800 RPM with >98% efficiency and 16 kW/kg, achieving low losses by incorporating a cryocooler within its rotor shaft to cool superconducting DC windings. A pulse-tube cryocooler typically contains an oscillating piston that drives acoustic waves; however, leakage around the piston reduces the efficiency of the cryocooler. A metal bellows was designed to replace the piston to allow for little to no leakage. The requirements for this bellows were extreme in terms of displacement amplitude, oscillating pressure amplitude, temperature, and frequency. It was determined that an off-the-shelf edge-welded bellows would not work for this application, so a custom bellows was designed to include full convolutions welded only on their outer diameters where the stress is lower. Several high-fatigue-strength materials were considered, including 17-4PH H900 and Aermet 100. The final bellows design includes 74 convolutions with a variable inner diameter that helps distribute and reduce the dynamic stress throughout the length rather than concentrating the high stress in one location. To test the concept, a short 10-convolution bellows with constant inner diameter was designed for testing. One short bellows test article was fabricated with the outer diameter weld, and one by 3D printing. Both will be fatigue-tested with the goal of achieving 10^7 cycles.

Bellows↗

Integrated Radiation Transport and Nuclear Fuel Performance for Assembly-Level Simulations

The Advanced Multi-Physics (AMP) Nuclear Fuel Performance code (AMPFuel) is focused on predicting the temperature and strain within a nuclear fuel assembly to evaluate the performance and safety of existing and advanced nuclear fuel bundles within existing and advanced nuclear reactors. AMPFuel was extended to include an integrated nuclear fuel assembly capability for (one-way) coupled radiation transport and nuclear fuel assembly thermo-mechanics. This capability is the initial step toward incorporating an improved predictive nuclear fuel assembly modeling capability to accurately account for source-terms, such as neutron flux distribution, coolant conditions and assembly mechanical stresses, of traditional (single-pin) nuclear fuel performance simulation. A novel scheme is introduced for transferring the power distribution from the Scale/Denovo (Denovo) radiation transport code (structured, Cartesian mesh with smeared materials within each cell) to AMPFuel (unstructured, hexagonal mesh with a single material within each cell), allowing the use of a relatively coarse spatial mesh (10 million elements) for the radiation transport and a fine spatial mesh (3.3 billion elements) for thermo-mechanics with very little loss of accuracy. With this novel capability, AMPFuel was used to model an entire 1717 pressurized water reactor fuel assembly with many of the features resolved in three dimensions (for thermo-mechanics and/or neutronics). A full assembly calculation was executed on Jaguar using 40,000 cores in under 10 hours to model over 160 billion degrees of freedom for 10 loading steps. The single radiation transport calculation required about 50% of the time required to solve the thermo-mechanics with a single loading step, which demonstrates that it is feasible to incorporate, in a single code, a high-fidelity radiation transport capability with a high-fidelity nuclear fuel thermo-mechanics capability and anticipate acceptable computational requirements. The results of the full assembly simulation clearly show the axial, radial, and azimuthal variation of the neutron flux, power, temperature, and deformation of the assembly, highlighting behavior that is neglected in traditional axisymmetric fuel performance codes that do not account for assembly features, such as guide tubes and control rods.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An Efficient Inverse Finite Element Method for Shape and Stress Sensing of Laminated Composite and Sandwich Plates and Shells

The inverse Finite Element Method (iFEM) is a revolutionary methodology for real-time reconstruction of full-field structural displacements and stresses in structures that are instrumented with strain sensors. This inverse problem is commonly referred to as shape and stress sensing, which is well-recognized as an enabling technology for structural health monitoring systems. In this study, an improved iFEM formulation is proposed for shape and stress sensing of laminated composite and sandwich plates and shells. The formulation includes the kinematics of a shear deformation plate theory known as Refined Zigzag Theory (RZT) as its baseline. The present iFEM formulation is based upon the minimization of a weighted-least-squares functional that uses the complete set of section strains of RZT. The improved iFEM methodology is applicable for shape and stress sensing of thin and moderately thick plate and shell structures involving a relatively small number of strain gauges. The main advantage of the current formulation is that highly accurate through-the-thickness distributions of displacements, strains, and stresses are attainable using an element based on simple C0-continuous displacement interpolation functions. A three-node inverseshell element, named i3-RZT, is developed. Two example problems are examined in detail: (1) a simply supported rectangular laminated composite plate and (2) a wedge structure with a hole near one of the clamped ends. For both problems, the experimental strain data are generated numerically by the direct finite element analysis using high-fidelity discretizations. These strains are then regarded as the experimental strains obtained from surface mounted strain gauges or embedded fiber Bragg grating (FBG) sensors. The numerical results demonstrate the superior capability and potential applicability of the i3- RZT/iFEM methodology for performing accurate shape and stress sensing of complex composite structures.

Kefal, Adnan↗

Thermoelastic Analysis of a Vibrating TiB/Ti Cantilever Beam Using Differential Thermography

Differential thermography has been used to detect the fluctuating temperatures due the thermoelastic effect for a number of years. This paper examines functionally graded TiB/Ti cantilever beams excited on an electromechanical shaker in fully reversed bending. Finite difference analysis of specimens was used to look at the effect of heat conduction, convection and the fundamental frequency on the surface temperature distribution and compared to experimental data. The thermoelastic effect was also used to detect cracking and the stress field at the tip of the fixture during fatigue.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Prediction of Precipitation Strengthening in the Commercial Mg Alloy AZ91 Using Dislocation Dynamics

In this paper, dislocation dynamics simulations were used to predict the strengthening of a commercial magnesium alloy, AZ91, due to β-Mg 17 Al 12 formed in the continuous precipitation mode. The precipitate distributions used in simulations were determined based on experimental characterization of the sizes, shapes, and number densities of the precipitates for 10-hour aging and 50-hour aging. For dislocations gliding on the basal plane, which is expected to be the dominant contributor to plastic deformation at room temperature, the critical resolved shear stress to bypass the precipitate distribution was 3.5 MPa for the 10-hour aged sample and 16.0 MPa for the 50-hour aged sample. The simulation results were compared to an analytical model of strengthening in this alloy, and the analytical model was found to predict critical resolved shear stresses that were approximately 30 pct lower. A model for the total yield strength was developed and compared with experiment for the 50-hour aged sample. Finally, the predicted yield strength, which included the precipitate strengthening contribution from the DD simulations, was 132.0 MPa, in good agreement with the measured yield strength of 141 MPa.

36 MATERIALS SCIENCE↗

Computational study on the behaviors of granular materials under mechanical cycling

Considering that fusion pebble beds are probably subjected to the cyclic compression excitation in their future applications, we presented a computational study to report the effect of mechanical cycling on the behaviors of granular matter. The correctness of our numerical experiments was confirmed by a comparison with the effective medium theory. Under the cyclic loads, the fast granular compaction was observed to evolve in a stretched exponential law. Besides, the increasing stiffening in packing structure, especially the decreasing moduli pressure dependence due to granular consolidation, was also observed. For the force chains inside the pebble beds, both the internal force distribution and the spatial distribution of force chains would become increasingly uniform as the external force perturbation proceeded and therefore produced the stress relief on grains. In this case, the originally proposed 3-parameter Mueth function was found to fail to describe the internal force distribution. Thereby, its improved functional form with 4 parameters was proposed here and proved to better fit the data. These findings will provide more detailed information on the pebble beds for the relevant fusion design and analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Revisit the stress-orienting effect of θ' in Al-Cu single crystal during stress aging

Highlights: • The microstructures observed along two different <001>{sub Al} zone axes were determined. • Three-dimension precipitation distribution of θ'-precipitates was established. • The different rules of the stress-orienting effect on θ'-phase were proposed. • Two opposite views of the stress-orienting effect on θ' are compared in detail. • Increasing in number density of θ' is the other sign of the stress-orienting effect. - Abstract: Three-dimension precipitation distribution of θ'-precipitates was established to revisit the stress-orienting effect of θ'-phase in Al-Cu single crystal during stress aging, via determining the microstructure observed along two different <001>{sub Al} zone axes. The results show that the θ'-precipitates prefer to precipitate on the habit planes parallel to the loading orientation, rather than the habit planes perpendicular to the loading orientation proposed in current views. Two opposite models of the stress-orienting effect on θ'-phase are compared and discussed in detail. They show the same aligned θ'-precipitate structure while observed perpendicular to the loading direction (i.e. [100]{sub Al} or [010]{sub Al}). The crucial difference actually lies in the microstructure observed along the loading orientation (i.e. [001]{sub Al}), which shows an increasing tendency in the number density of θ'-precipitates with increasing applied stress. This result further proves that the θ'-precipitates prefer to precipitate on the habit planes parallel to the loading orientation. In addition to the aligned θ'-precipitate structure, the fact that the number density of θ'-precipitates is increasing can be also treated as the other sign of the stress-orienting effect.

36 MATERIALS SCIENCE↗