Search NASA⌕ Search

SEARCH · Search NASA

Results for “SUPERFLUID MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Study of the thermal properties of filaments for 3D printing

Various materials are used for 3D printing, most commonly Acrylonitrile butadiene styrene (ABS), Polylactic acid (PLA), Polyethylene (PET) and Polypropylene (PP). These materials differ mainly in their melting point, which significantly influences the properties of the final products. Filaments are melted in the print head during the printing process. The temperature range is from 150 °C to 250 °C depending on the technology used. The optimum temperature for the cooling substrate on which printing is carried out is chosen so as to ensure uniform cooling and deformation. It generally varies between (40 – 100) °C. From the above it is clear that both temperatures can significantly affect the properties of the printed 3D object. It is therefore important to determine the thermal parameters (thermal conductivity, specific heat and thermal diffusivity) of the materials used across the entire range of temperatures. For evaluating the properties of different types of PLA materials, the step transient method was used, which allows determination of all required parameters using a fractal heat transfer model.

36 MATERIALS SCIENCE↗

Stokes parameters of the radiation of transverse-single-mode InGaAs/AlGaAs lasers with a quantum-well active region

A study of lasers with two different heterostructures has revealed that the polarisation state of laser radiation depends strongly on the specific sample at pump currents corresponding to the regular behaviour of the light-current characteristic. Thus, the deviation of the radiation polarisation from linear can be used as a sensitive characteristic of the laser quality. It is found that anomalies in the power-current characteristic (the so-called kinks) are accompanied by a significant decrease in the degree of polarisation. The measured degrees of polarisation of spontaneous emission from samples (at pump currents much below the threshold) are in good agreement with the theoretical estimate obtained within the three-band model of optical transitions. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Numerical Stress Analysis during Cooldown and Compressive Loading in an Imperfect Nb 3 Sn Wire

In this paper, high field superconductors are critical to the success of next step magnetic fusion confinement devices such as ITER and DEMO. The low-temperature superconducting material that is currently favored for these applications, Nb 3 Sn, is susceptible to performance due to its brittleness and high strain-sensitivity. Under extreme loads, an irreversible degradation in the maximum critical current density has been shown to occur and believed to be strongly influenced by two factors: plasticity and cracked filaments. Cracks in filaments are induced when sufficiently high stress concentrations occur in the wire. In this paper, we explore using finite element analysis the impact that voids have on the stress distributions and peak stresses under two loading conditions: transverse compressive loading in a 2D model, and a full cool down phase in a 3D model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gapless to gapless phase transitions in quantum spin chains

We investigate spin chains with bilinear-biquadratic (BLBQ) spin interactions as a function of an applied magnetic field h. At the Uimin-Lai-Sutherland (ULS) critical point we find a gapless to gapless transition revealed by the dynamical structure factor S(q,ω) as a function of h. At h=0, the envelope of the lowest-energy excitations goes soft at two points, q 1 =2π/3 and q 2 =4π/3, dubbed the phase A. With increasing field, the spectral peaks at each of the gapless points bifurcate, making in total four soft modes, and combine to form a new set of excitations that soften at a single point q=π at h c1 ≈0.94. Beyond h c1 the system enters another gapless B phase until the transition at h c2 =4 to the fully polarized phase. We compare the ULS model results with those for the Affleck-Kennedy-Lieb-Tasaki model as a representative of the gapped Haldane phase. We explain the mechanism of the gapless to gapless transition in the ULS model using its conserved charges and a spinon band picture. We also discuss the universality of central charges of the BLBQ family of models subjected to a magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nontrivial topology and localization in the double exchange model with possible applications to perovskite manganites

The double exchange model describing the coupling between conduction electrons and localized magnetic moments is relevant for a large family of physical systems including manganites. Here we reveal that the one-dimensional double exchange model with an incommensurate magnetic elliptical spiral is a topological insulator with a Chern number 2Z in the two-dimensional space with one physical dimension and one ancillary dimension spanned by the Goldstone mode of the spiral. Moreover, the electronic states can be localized for a strong local exchange coupling. The topological protected edge states are responsible for the pumping of electron charge, and give rise to multiferroic response. Furthermore, our work uncovers hitherto undiscovered nontrivial topology and Anderson localization in the double exchange model with possible applications to perovskite manganites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quasilocal charges and the generalized Gibbs ensemble in the Lieb-Liniger model

Here, we consider the construction of a generalized Gibbs ensemble composed of complete bases of conserved charges in the repulsive Lieb-Liniger model. We will show that it is possible to construct these bases with varying locality as well as demonstrating that such constructions are always possible provided one has in hand at least one complete basis set of charges. This procedure enables the construction of bases of charges that possess well-defined, finite expectation values given an arbitrary initial state. We demonstrate the use of these charges in the context of two different quantum quenches: a quench where the strength of the interactions in a one-dimensional gas is switched suddenly from zero to some finite value and the release of a one-dimensional cold atomic gas from a confining parabolic trap. While we focus on the Lieb-Liniger model in this paper, the principle of the construction of these charges applies to all integrable models, both in continuum and lattice form.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrodynamics on Fermi Cyclides in Nodal Line Semimetals

We study the frequency-dependent conductivity of nodal line semimetals (NLSMs), focusing on the effects of carrier density and energy dispersion on the nodal line. Here, we find that the low-frequency conductivity has a rich spectral structure which can be understood using scaling rules derived from the geometry of their Dupin cyclide Fermi surfaces. We identify different frequency regimes, find scaling rules for the optical conductivity in each, and demonstrate them with numerical calculations of the inter- and intraband contributions to the optical conductivity using a low-energy model for a generic NLSM.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Robust d-Wave Superconductivity in the Square-Lattice t–J Model

Unravelling competing orders emergent in doped Mott insulators and their interplay with unconventional superconductivity is one of the major challenges in condensed matter physics. Here, to explore the possible superconducting state in a doped Mott insulator, we study the square-lattice t-J model with both the nearest-neighbor and next-nearest-neighbor electron hoppings and spin interactions. By using the state-of-the-art density matrix renormalization group calculation with imposing charge U(1) and spin SU(2) symmetries on the six-leg cylinders, we establish a quantum phase diagram including three phases: a stripe charge density wave phase, a superconducting phase without static charge order, and a superconducting phase coexistent with a weak charge stripe order. Crucially, we demonstrate that the superconducting phase has a power-law pairing correlation that decays much slower than the charge density and spin correlations, which is a quasi-1D descendant of the uniform d-wave superconductor in two dimensions. These findings reveal that enhanced charge and spin fluctuations with optimal doping is able to produce robust d-wave superconductivity in doped Mott insulators, providing a foundation for connecting theories of superconductivity to models of strongly correlated systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DShaper: An approach for handling missing low-Q data in pair distribution function analysis of nanostructured systems

In this work we discuss the potential problems and currently available solutions in modeling powder-diffraction based pair-distribution function (PDF) data from systems where morphological feature information content includes distances in the nanometer length scale, such as finite nanoparticles, nanoporous networks, and nanoscale precipitates in bulk materials. The implications of an experimental finite minimum Q-value are addressed by simulation, which also demonstrates the advantages of combining PDF data with small angle scattering data (SAS). In addition, we introduce a simple Fortran90 code, DShaper , which may be incorporated into PDF data fitting routines in order to approximate the so-called shape-function for any atomistic model.

36 MATERIALS SCIENCE↗

Negative oxygen ion formation in reactive magnetron sputtering processes for transparent conductive oxides

Reactive d.c. magnetron sputtering in Ar/O{sub 2} gas mixtures has been investigated with energy-resolved mass spectrometry. Different metal targets (Mg, Ti, Zn, In, InSn, and Sn), which are of importance for transparent conductive oxide thin film deposition, have been used to study the formation of negative ions, mainly high-energetic O{sup -}, which are supposed to induce radiation damage in thin films. Besides their energy distribution, the ions have been particularly investigated with respect to their intensity in comparison of the different target materials. To realize the comparability, various calibration factors had to be introduced. After their application, major differences in the negative ion production have been observed for the target materials. The intensity, especially of O{sup -}, differs by about two orders of magnitude. It is shown that this difference results almost exclusively from ions that gain their energy in the target sheath. Those may gain additional energy from the sputtering process or reflection at the target. Low-energetic negative ions are, however, less affected by changes of the target material. The results concerning O{sup -} formation are discussed in term of the sputtering rate from the target and are compared to models for negative ion formation.

36 MATERIALS SCIENCE↗

Superconductivity in the doped Hubbard model and its interplay with next-nearest hopping t ′

The Hubbard model is widely believed to contain the essential ingredients of high-temperature superconductivity. However, proving definitively that the model supports superconductivity is challenging. Here, we report a large-scale density matrix renormalization group study of the lightly doped Hubbard model on four-leg cylinders at hole doping concentration δ = 12.5%. We reveal a delicate interplay between superconductivity and charge density wave and spin density wave orders tunable via next-nearest neighbor hopping t ′. For finite t ′, the ground state is consistent with a Luther-Emery liquid with power-law superconducting and charge density wave correlations associated with half-filled charge stripes. In contrast, for t ′ = 0, superconducting correlations fall off exponentially, whereas charge density and spin density modulations are dominant. Our results indicate that a route to robust long-range superconductivity involves destabilizing insulating charge stripes in the doped Hubbard model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preliminary X-Ray Crystallographic Studies of the N-Terminal Domains of Hsp104 from Yeast Candida albicans and Saccharomyces cerevisiae

Yeast Hsp104 is an ATP-dependent molecular chaperone, which can solublize and rescue denatured proteins from aggregates into active form by cooperating with Hsp70 and Hsp40 chaperones. Moreover, overexpression of Hsp104 of Saccharomyces cerevisiae (ScHsp104) cures the yeast [PSI{sup +}] prion due to the completely dissolution of the prion seeds, demonstrating ScHsp104’s potential to clear amyloid-like protein aggregates, thus making ScHsp104 a promising medication approach for human amyloidogenic neurodegenerative diseases. Because the working mechanisms for ScHsp104’s activities have not been clearly elucidated yet, crystallographic determination of ScHsp104 stands for great significance. Here, the expression, purification and crystallization of the N-terminal domains of Hsp104 from yeast Candida albicans (CaHsp104N) and S. cerevisiae (ScHsp104N) are described. The CaHsp104N crystals diffracted to 1.54 Å and belonged to the sp. gr. P3{sub 2}21 or P3{sub 1}21, with unit cell parameters of a = 55.213 Å, c = 109.451 Å. The data of the ScHsp104N crystals were collected to the resolution of 2.53 Å in the sp. gr. C2, with unit cell parameters a = 148.587 Å, b = 66.255 Å, c = 74.577 Å, β = 107.369°. The phase of ScHsp104N is determined by the molecular replacement method using CaHsp104N as the search model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusion current in a system of coupled Josephson junctions

The role of a diffusion current in the phase dynamics of a system of coupled Josephson junctions (JJs) has been analyzed. It is shown that, by studying the temporal dependences of the superconducting, quasi-particle, diffusion, and displacement currents and the dependences of average values of these currents on the total current, it is possible to explain the main features of the current-voltage characteristic (CVC) of the system. The effect of a diffusion current on the character of CVC branching in the vicinity of a critical current and in the region of hysteresis, as well as on the part of CVC branch corresponding to a parametric resonance in the system is demonstrated. A clear interpretation of the differences in the character of CVC branching in a model of capacitively coupled JJs (CCJJ model) and a model of capacitive coupling with diffusion current (CCJJ+DC model) is proposed. It is shown that a decrease in the diffusion current in a JJ leads to the switching of this junction to an oscillating state. The results of model calculations are qualitatively consistent with the experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-frequency absorption of the dynamic mixed state in the surface superconductivity region

We analyze the absorption of a high-frequency electromagnetic field in the type II superconductor Pb{sub 0.8}In{sub 0.2} in magnetic fields H{sub c2} < H < H{sub c3}. The absorption component proportional to the rate of variation of the external magnetic field is detected. We assume that this absorption component is associated with the dynamic mixed state of the superconducting shell containing 2D magnetic flux vortices (Kulik vortices). The motion of these vortices under the action of the critical current ensures the required difference between the external and internal magnetic inductions of the superconducting shell upon a change in the external magnetic field. This model correctly describes the observed behavior of absorption of rf electromagnetic radiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Room-temperature ferromagnetism in cerium dioxide powders

Room-temperature ferromagnetism is detected in a CeO{sub 2} powder with a grain size of about 35 nm and a low (<0.1 at %) manganese and iron content. The ferromagnetism in a CeO{sub 2} sample with a submicron crystallite size and the same manganese and iron impurity content is lower than in the nanocrystalline sample by an order of magnitude. Apart from ferromagnetism, both samples exhibit EPR spectra of localized paramagnetic centers, the concentration of which is lower than 0.01 at %. A comparative analysis of these results shows that the F-center exchange (FCE) mechanism cannot cause ferromagnetism. This conclusion agrees with the charge-transfer ferromagnetism model proposed recently.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase Transitions and Thermodynamic Properties of the Potts Model with Spin States Number q = 4 on a Hexagonal Lattice

Phase transitions and thermodynamic properties of the 2D ferromagnetic Potts model with the number of spin states q = 4 on a hexagonal lattice are investigated by the Mote Carlo method based on the Wang–Landau algorithm. The orders of the phase transitions are investigated using the Binder fourth-order cumulant method and histogram analysis of data. It is established that a first-order transition is observed in the model being investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulation of the Interaction of a Magnetic Resonance Force Microscope Probe with a Ferromagnetic Sample

We propose an algorithm and present results of micromagnetic simulation of the resonant response of a probe pickup (cantilever) of a magnetic resonance force microscope. Simulation of induced oscillations of sample magnetization makes it possible to calculate the varying component of the force exerted on the probe by the sample and to construct spectra in the form of dependences of the amplitude of oscillations of the cantilever on the external magnetic field strength. Simulation of time dependences of all magnetization field components makes it possible to analyze the spatial distributions of spin-wave resonances of samples. For test objects in the form of rectangular permalloy microstrips, good agreement between model and experimental spectra is achieved.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutron Scattering of Residual Hydrogen in 1,4-Dioxane-D8 Liquid. Understanding Measurements with Molecular Dynamics Simulations

That incoherent scattering from protiated molecular liquids adds a constant background to the measured scattering intensity is well known, but less appreciated is the fact that coherent scattering is also induced by the presence of hydrogen in a deuterated liquid. In fact, the scattering intensity can be very sensitive, in the small-q region, with respect to the amounts and distribution of residual H in the system. We used 1,4-dioxane liquid to demonstrate that the partial structure factors of the HD and DD atom pairs contribute significantly to inter-molecular scattering and that uncertainty in the extent of deuteration account for discrepancies between simulations and measurements. Both contributions to uncertainty have similar magnitudes: scattering interference of the hydrogen-deuterium pair, and complementary interference from the deuterium-deuterium pair by virtue of chemical inhomogeneity. This situation arises in practice since deuteration of liquids is often 99% or less. A combined experimental and extensive computational study of static thermal neutron scattering of 1,4-dioxane demonstrates the foregoing. We show, through simulations, that the reason for the differences is the content of protiated dioxane (vendors quote 1%). We estimate that up to 5% (at 298K and at 343K) protiated mole fraction may be involved in generating the scattering differences. Finally, we find that the particular distribution of hydrogen in the protiated molecules affects the results significantly; here we considered molecules to be either fully protiated or fully deuterated. This scenario best reconciles the computational and experimental results, and leads us to speculate that the deuteration synthesis process tends to leave a molecule either fully deuterated or fully protiated. Although we have used 1,4-dioxane as a model liquid, the effects described in this study extend to similar liquids and similar systematic experimental/computational studies can be performed to either understand measurements or calibrate/validate molecular dynamics models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗