Search NASA⌕ Search

SEARCH · Search NASA

Results for “YEASTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Engineered Chromatin Remodeling Proteins for Precise Nucleosome Positioning

Regulation of chromatin structure is essential for controlling access of DNA to factors that require association with specific DNA sequences. Here we describe the development and validation of engineered chromatin remodeling proteins (E-ChRPs) for inducing programmable changes in nucleosome positioning by design. We demonstrate that E-ChRPs function both in vitro and in vivo to specifically reposition target nucleosomes and entire nucleosomal arrays. We show that induced, systematic positioning of nucleosomes over yeast Ume6 binding sites leads to Ume6 exclusion, hyperacetylation, and transcriptional induction at target genes. We also show that programmed global loss of nucleosome-free regions at Reb1 targets is generally inhibitory with mildly repressive transcriptional effects. E-ChRPs are compatible with multiple targeting modalities, including the SpyCatcher and dCas9 moieties, resulting in high versatility and enabling diverse future applications. Thus, engineered chromatin remodeling proteins represent a simple and robust means to probe and disrupt DNA-dependent processes in different chromatin contexts.

59 BASIC BIOLOGICAL SCIENCES↗

Applications of methylotrophs: can single carbon be harnessed for biotechnology?

Here this review summarizes developments in the field of applied research involving microbial conversion of single carbon compounds (methane, methanol, CO 2 ). The potential of the microorganisms involved in biotechnological applications could be realized via engineering native C1 utilizers toward higher output of value-added compounds, including biofuels, or via production of value chemicals as parts of novel, heterologously expressed biochemical pathways. Alternatively, C1 metabolism could be implemented in traditional industrial platforms (Escherichia coli, yeast), via introduction of specific metabolic modules. Most recent research spanning both approaches is covered. The potential of C1 utilizers in biomining of rare Earth elements, as well as the potential of C1 consuming microbial consortia in industrial applications are discussed.

59 BASIC BIOLOGICAL SCIENCES↗

Genetically pliable green algae for bioproduction of modified fatty acids, nutritional therapeutic oils, and biopharmaceuticals

Homologous recombination (HR) is an essential tool for complex metabolic engineering in yeast, but transgene integration into plant and green algal nuclear genomes predominantly occurs by non-homologous end-joining. Species of the closely related, oleaginous trebouxiophytes Auxenochlorella and Prototheca, are unusual among the green algae in that HR is the favored mechanism for DNA integration into the nuclear genome. This property enables locus-specific targeting of gene cassettes encoding multiple enzymes for manipulating existing biochemical pathways or introducing new functions. Genetic malleability, and regulatory approval for human consumption, coupled with robust fermentation performance at industrial scale, establishes Auxenochlorella and Prototheca as prime candidates for algal production of biochemicals and biomaterials. The examples presented here highlight strain improvement and engineering for synthesis of hydroxylated fatty acids for biomaterials, structured triglycerides resembling human milk fat for infant nutrition, very-long-chain mono- and polyunsaturated fatty acids with nutraceutical or therapeutic potential, and cannabinoids for pharmacological applications.

Moseley, Jeffrey L. [University of California, Ber↗

Quantitative multiplexed analysis of gene and protein expression patterns in Yarrowia lipolytica

In this report, we present coordinated observations of protein and mRNA transcript counts at the single-cell level in the oleaginous yeast model Yarrowia lipolytica. The transcription factor Xbp1p regulates entry into a quiescent state, representing a shift of resources to sequestration of nutrients rather than cell division. We observed the responses of wild-type and Δxbp1 cells to protein (by fluorescence) and transcript quantification and localization at both single-cell and population-averaged levels. Data were collected via single-molecule fluorescence in situ hybridization (smFISH) and qPCR under nitrogen depletion, a condition that drives lipid accumulation. These techniques reveal a complex and heterogeneous population of Xbp1p dynamics and downstream regulation. Our findings highlight the need for single-cell resolution analyses to describe cellular dynamics and regulatory processes.

Yarrowia lipolytica↗

Transcriptional and translational landscape of Candida auris in response to caspofungin

Candida auris has emerged as a serious worldwide threat by causing opportunistic infections that are frequently resistant to one or more conventional antifungal medications resulting in high mortality rates. Against this backdrop, health warnings around the world have focused efforts on understanding C. auris fungal biology and effective prevention and treatment approaches to combat this fungus. To date, there is little information about the differentially expressed genes when this fungus is treated with conventional antifungals, and caspofungin is a standard echinocandin deployed in the therapy against C. auris. In this work, we treated two distinct strains of C. auris for 24h with caspofungin, and the cellular responses were evaluated at the morphological, translational and transcriptional levels. We first observed that the echinocandin caused morphological alterations, aggregation of yeast cells, and modifications in the cell wall composition of C. auris. Transcriptomic analysis revealed an upregulation of genes related to the synthesis of the cell wall, ribosome, and cell cycle after exposure to caspofungin. Supporting these findings, the integrated proteomic analysis showed that caspofungin-treated cells were enriched in ribosome-related proteins and cell wall, especially mannoproteins. Altogether, these results provide further insights into the biology of C. auris and expands our understanding regarding the antifungal activity of caspofungin and reveal cellular targets, as the mannose metabolism, that can be further explored for the development of novel antifungals.

59 BASIC BIOLOGICAL SCIENCES↗

Determining protein polarization proteome-wide using physical dissection of individual Stentor coeruleus cells

Cellular components are non-randomly arranged with respect to the shape and polarity of the whole cell. Patterning within cells can extend down to the level of individual proteins and mRNA. But how much of the proteome is actually localized with respect to cell polarity axes? Proteomics combined with cellular fractionation has shown that most proteins localize to one or more organelles but does not tell us how many proteins have a polarized localization with respect to the large-scale polarity axes of the intact cell. Genome-wide localization studies in yeast found that only a few percent of proteins have a localized position relative to the cell polarity axis defined by sites of polarized cell growth. Here, we describe an approach for analyzing protein distribution within a cell with a visibly obvious global patterning - the giant ciliate Stentor coeruleus. Ciliates, including Stentor, have highly polarized cell shapes with visible surface patterning. A Stentor cell is roughly 2mmlong, allowing a ‘‘proteomic dissection’’ in which microsurgery is used to separate cellular fragments along the anterior-posterior axis, followed by comparative proteomic analysis. In our analysis, 25% of the proteome, including signaling proteins, centrin/SFI proteins, and GAS2 orthologs, shows a polarized location along the cell’s anterior-posterior axis. We conclude that a large proportion of all proteins are polarized with respect to global cell polarity axes and that proteomic dissection provides a simple and effective approach for spatial proteomics.

59 BASIC BIOLOGICAL SCIENCES↗

Molecular basis for damage recognition and verification by XPC-RAD23B and TFIIH in nucleotide excision repair

Global genome nucleotide excision repair (GG-NER) is the main pathway for the removal of bulky lesions from DNA and is characterized by an extraordinarily wide substrate specificity. Remarkably, the efficiency of lesion removal varies dramatically and certain lesions escape repair altogether and are therefore associated with high levels of mutagenicity. Central to the multistep mechanism of damage recognition in NER is the sensing of lesion-induced thermodynamic and structural alterations of DNA by the XPC-RAD23B protein and the verification of the damage by the transcription/repair factor TFIIH. Additional factors contribute to the process: UV-DDB, for the recognition of certain UV-induced lesions in particular in the context of chromatin, while the XPA protein is believed to have a role in damage verification and NER complex assembly. In this paper, we consider the molecular mechanisms that determine repair efficiency in GG-NER based on recent structural, computational, biochemical, cellular and single molecule studies of XPC-RAD23B and its yeast ortholog Rad4. We discuss how the actions of XPC-RAD23B are integrated with those of other NER proteins and, based on recent high-resolution structures of TFIIH, present a structural model of how XPC-RAD23B and TFIIH cooperate in damage recognition and verification.

59 BASIC BIOLOGICAL SCIENCES↗

Microbial biogeography of the transnational fermented milk matsoni

The fermented milk matsoni is a traditional, national food product of both Georgia and Armenia. Little is known about the effects of biogeography and milk type on the microbial biodiversity of matsoni or the fungal composition of matsoni fermentations. High-throughput marker-gene sequencing was used here to survey the bacterial and fungal communities of matsoni from different milk types and regions throughout Armenia and Georgia. In this work, results demonstrate that both production region and milk type influence matsoni microbiota, suggesting that the traditional production methods preserve the transfer of unique regional microbiota from batch to batch. Bacterial profiles were dominated by Lactobacillus and Streptococcus species. Yeast profiles varied dramatically, with Kluyveromyces marxianus, Candida famata, Saccharomyces cerevisiae, Lodderomyces elongisporus, and Kluyveromyces lactis being the most important species distinguishing production regions and milk types. This survey will enable more detailed capture and characterization of specific microbiota detected within these fermentations.

59 BASIC BIOLOGICAL SCIENCES↗

Aspergillus nidulans Pmts form heterodimers in all pairwise combinations

Eukaryotic protein O-mannosyltransferases (Pmts) are divided into three subfamilies (Pmt1, Pmt2, and Pmt4) and activity of Pmts in yeasts and animals requires assembly into complexes. In Saccharomyces cerevisiae, Pmt1 and Pmt2 form a heteromeric complex and Pmt 4 forms a homomeric complex. The filamentous fungus Aspergillus nidulans has three Pmts: PmtA (subfamily 2), PmtB (subfamily 1), and PmtC (subfamily 4). In this study we show that A. nidulans Pmts form heteromeric complexes in all possible pairwise combinations and that PmtC forms homomeric complexes. We also show that MsbA, an ortholog of a Pmt4-modified protein, is not modified by PmtC.

Msb2↗

Generation of camelina mid-oleic acid seed oil by identification and stacking of fatty acid biosynthetic mutants

Modifying oilseeds to obtain a desired fatty acid composition is often necessary to enable use as feedstocks for specific applications such as food processing, biofuels, or biolubricants. A mutant population of camelina (Camelina sativa), an emerging specialty oilseed crop, was screened by high-throughput gas chromatography for lines with altered seed oil fatty acid composition. By leveraging knowledge of fatty acid synthesis in Arabidopsis thaliana, mutations in orthologs of FATTY ACID ELONGASE1 (FAE1), FATTY ACID DESATURASE2 (FAD2), FATTY ACID DESATURASE3 (FAD3), and β-KETO-ACYL-ACP SYNTHASE II (KASII; FAB1) were identified. The mutations altered conserved amino acid residues in the encoded proteins. The ability of the mutations in FAE1, FAD2 and FAD3 to affect enzyme function was demonstrated by comparing in vivo activities of wild-type and mutant alleles in yeast. In addition, expression of wild-type cDNA in camelina complemented fatty acid phenotypes of these mutants. As camelina has a hexaploid genome, the effect of a mutation in one of the three homeologs for each gene resulted in no or less severe growth phenotypes compared to similar mutations in Arabidopsis. Mid-oleic oils with nearly 40 % oleic acid and reduced very long-chain (≤C20) fatty acid content were obtained by crossing to obtain a fae1c/fad2a/fae1a/fad3a quadruple mutant. Little effect on total seed oil content was observed in the stacked mutant line. Finally, the resulting mid-oleic acid oil had improved oxidative stability due to reductions in polyunsaturated fatty acid content, increasing its utility for biofuels and other applications.

09 BIOMASS FUELS↗

Assessing microbial systems and process configurations for improved ethanol production from sugary stovers by integrating soluble sugars and holocellulose

Here, this study evaluated microbial systems and technological approaches to configure the whole slurry co-fermentation process for ethanol biosynthesis from a novel stover system rich in sugars. Two approaches, namely separate and simultaneous hydrolysis and co-fermentation (SHCF and SSCF, respectively), were investigated using Escherichia coli monoculture and E. coli-yeast coculture. The SSCF with E. coli monoculture produced 32.75 g/L ethanol, representing only 44.87% yield, which left 65.13 g/L of total sugars unconverted and exhibited limited xylose consumption. Subsequently, a coculture-based SHCF significantly enhanced sugar consumption, leading to increase in ethanol yield and concentration to 66.94% and 48.86 g/L, respectively. Nevertheless, xylose utilization remained minimal due to the preference for glucose and the inhibitory effects of certain compounds. Thereafter, modification of the medium composition by supplementing betaine and sodium metabisulfite improved ethanol production to 53.18 g/L by reducing the toxic effects of inhibitors. Finally, a dual-phase SSCF (DP-SSCF) was explored by allowing the consumption of sugars from the pretreated slurry in the first phase, followed by concurrent cellulose hydrolysis and utilization of the resulting glucose in the second phase. This strategy increased ethanol titer to 63.14 g/L, with 84.3% yield and 0.88 g/L/h productivity.

09 BIOMASS FUELS↗

Structural analysis of carbohydrate binding by the macrophage mannose receptor CD206

The human mannose receptor expressed on macrophages and hepatic endothelial cells scavenges released lysosomal enzymes, glycopeptide fragments of collagen, and pathogenic microorganisms and thus reduces damage following tissue injury. The receptor binds mannose, fucose, or N-acetylglucosamine (GlcNAc) residues on these targets. C-type carbohydrate recognition domain 4 (CRD4) of the receptor contains the site for Ca 2+ -dependent interaction with sugars. To investigate the details of CRD4 binding, glycan array screening was used to identify oligosaccharide ligands. The strongest signals were for glycans that contain either Manα1-2Man constituents or fucosein various linkages. The mechanisms of binding to monosaccharides and oligosaccharide substructures present in many of these ligands were examined in multiple crystal structures of CRD4. Binding of mannose residues to CRD4 results primarily from interaction of the equatorial 3- and 4-OH groups with a conserved principal Ca 2+ common to almost all sugar-binding C-type CRDs. In the Manα1-2Man complex, supplementary interactions with the reducing mannose residue explain the enhanced affinity for this disaccharide. Bound GlcNAc also interacts with the principal Ca 2+ through equatorial 3- and 4-OH groups, whereas fucose residues can bind in several orientations, through either the 2- and 3-OH groups or the 3- and 4-OH groups. Secondary contacts with additional sugars in fucose-containing oligosaccharides, such as the Lewis-a trisaccharide, provide enhanced affinity for these glycans. These results explain many of the biologically important interactions of the mannose receptor with both mammalian glycoproteins and microbes such as yeast and suggest additional classes of ligands that have not been previously identified

59 BASIC BIOLOGICAL SCIENCES↗

HPLC-Parallel accelerator and molecular mass spectrometry analysis of 14 C-labeled amino acids

Accelerator mass spectrometry (AMS) is the method of choice for quantitation of low amounts of 14 C-labeled biomolecules. Despite exquisite sensitivity, an important limitation of AMS is its inability to provide structural information about the analyte. This limitation is not critical when the labeled compounds are well-characterized prior to AMS analysis. However, analyte identity is important in other experiments where, for example, a compound is metabolized and the structures of its metabolites are not known. We previously described a moving wire interface that enables direct AMS measurement of liquid sample in the form of discrete drops or HPLC eluent without the need for individual fraction collection, termed liquid sample-AMS (LS-AMS). Here, we now report the coupling of LS-AMS with a molecular mass spectrometer, providing parallel accelerator and molecular mass spectrometry (PAMMS) detection of analytes separated by liquid chromatography. The repeatability of the method was examined by performing repeated injections of 14 C-labeled tryptophan, and relative standard deviations of the 14 C peak areas were ≤10.57% after applying a normalization factor based on a standard. Five 14 C-labeled amino acids were separated and detected to provide simultaneous quantitative AMS and structural MS data, and AMS results were compared with solid sample-AMS (SS-AMS) data using Bland-Altman plots. To demonstrate the utility of the workflow, yeast cells were grown in a medium with 14 C-labeled tryptophan. The cell extracts were analyzed by PAMMS, and 14 C was detected in tryptophan and its metabolite kynurenine.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Biorefinery upgrading of herbaceous biomass to renewable hydrocarbon fuels, Part 1: Process modeling and mass balance analysis

Process simulation has long been a well-established tool to track key operational, design, and mass and energy balance metrics for pre-commercial technologies such as advanced lignocellulosic biofuels. While tools such as this are well-documented in the public literature around 2nd-generation cellulosic ethanol technologies (which have been scaled up to commercial deployment to some degree over the past decade), such models and analysis information remain more sparse for more complex biorefinery pathways focused on producing drop-in hydrocarbon fuels and blend-stocks, particularly regarding information required to support air emissions or other environmental analysis. In this work, we summarize key details for an established "design case" modeling the conversion of herbaceous lignocellulosic biomass into a renewable diesel hydrocarbon blend-stock based on a representative lipid pathway from oleaginous yeast. The process is based on a biochemical deconstruction and upgrading approach utilizing deacetylation and dilute acid pretreatment, followed by enzymatic hydrolysis, fermentation, and catalytic upgrading of hydrolysate sugars to fuels. We provide key mass and energy balance outputs from the process models, with accompanying stream tables and component-level flowrates. A total of 12 model scenarios are presented spanning two feedstocks, three biorefinery scales, and two processing approaches for the lignin/residual solids waste streams. This "Part 1" manuscript presents the resulting impacts across the 12 cases on fuel yields and key output streams, focused here on direct biorefinery air emissions for selected components including CO 2 as well as sulfur (SOx) and nitrogen oxides (NOx). In the context of cleaner production, the latter focus on selected biorefinery air emission outputs establishes an initial baseline estimate and accompanying framework of the model cases, upon which an accompanying "Part 2" study will build to refine the values for these and other air pollutants across these scenarios, also considering mitigation options to comply with applicable regulatory standards. We also highlight further optimization opportunities based on potential tradeoffs identified here between air emissions versus life-cycle greenhouse gas profiles attributed to the disposition of lignin/residual solids.

09 BIOMASS FUELS↗

Engineering of holocellulase in biomass-degrading fungi for sustainable biofuel production

Biofuels, such as bioethanol, are a clean and sustainable form of energy and have emerged as a viable alternative to fossil fuels. Plant biomass is an important raw material for the production of clean and renewable energy. The holocellulose contained in the composition of plants may be broken down into simple sugars, such as glucose, which are fermented by yeast to produce bioethanol. The conversion of glucose polymers into fermentable sugars is accomplished by enzymes known as holocellulases, which are produced by lignocellulolytic fungi. These enzymes act synergistically for the efficient degradation of cellulose polymers, and the fine and coordinated regulation of this process is performed by transcription factors (TFs). TFs are regulatory proteins that bind to the promoter region of their target genes (CAZymes, sugar transporters, signaling proteins, other TFs, etc.) to induce or repress their transcription. This review aims to understand the main regulatory mechanisms involved in plant biomass degradation by the most studied lignocellulolytic fungi Trichoderma sp., Aspergillus sp., Penicillium sp., and Neurospora crassa. In this context, the most studied TFs related to holocellulose degradation and genetic modification of TFs or promoters as a valuable tool to improve enzyme production for biotechnological purposes have been discussed. Furthermore, this review enables the expansion of knowledge on the regulation of the cellulolytic system of filamentous fungi and the application of this knowledge to the improvement of numerous bioproducts. Engineering TFs and promoters may yield more efficient strains that may be active in plant biomass hydrolysis. In this way, the technological processes for obtaining ethanol from lignocellulose may become more commercially viable.

09 BIOMASS FUELS↗

Structure and Catalytic Properties of an Engineered Heterodimer of Enolase Composed of One Active and One Inactive Subunit

Enolase is a dimeric enzyme that catalyzes the interconversion of 2-phospho-D-glycerate and phosphoenolpyruvate. This reversible dehydration is effected by general acid-base catalysis that involves, principally, Lys345 and Glu211 (numbering system of enolase 1 from yeast). The crystal structure of the inactive E211Q enolase shows that the protein is properly folded. However, K345 variants have, thus far, failed to crystallize. This problem was solved by crystallization of an engineered heterodimer of enolase. The heterodimer was composed of an inactive subunit that has a K345A mutation and an active subunit that has N80D and N126D surface mutations to facilitate ion-exchange chromatographic separation of the three dimeric species. The structure of this heterodimeric variant, in complex with substrate/product, was obtained at 1.85 {angstrom} resolution. The structure was compared to a new structure of wild-type enolase obtained from crystals belonging to the same space group. Asymmetric dimers having one subunit exhibiting two of the three active site loops in an open conformation and the other in a conformation having all three loops closed appear in both structures. The K345A subunit of the heterodimer is in the loop-closed conformation; its C{sup {alpha}} carbon atoms closely match those of the corresponding subunit of wild-type enolase (root-mean-squared deviation of 0.23 {angstrom}). The kcat and k{sub cat}/K{sub m} values of the heterodimer are approximately half those of the N80D/N126D homodimer, which suggests that the subunits in solution are kinetically independent. A comparison of enolase structures obtained from crystals belonging to different space groups suggests that asymmetric dimers can be a consequence of the asymmetric positioning of the subunits within the crystal lattice.

36 MATERIALS SCIENCE↗