Search NASA⌕ Search

SEARCH · Search NASA

Results for “circularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

High-sensitivity circular polarimetry of the Sun, 0.5 - 1.7 microns

Using an isometric (symmetrical) photoelastic-modulator polarimeter and a Cassegrain telescope, broadband polarization measures of the Sun were obtained with unprecedented sensitivity. With an instrumental background of x 10 to the minus 6th power differential effects delta q = V/I of 1 x 10 to the minus 7th power were detectable. Some results: (1) the lambda dependence of broadband circular polarization in spots was observed out to 1.7 mu, extending the visible-light measurements of Illing, Landman, and Mickey. The q drops to of the order of 1 x 10 to the minus 5 power at 1.2 mu (in a strong spot), then rises at 1.6 mu. While molecules or other special mechanisms must play a role in the visible-light polarization, at lambda 1.5 mu the q values seem consistent with gray magneto-opacity. (2) By surveying inactive regions upper limits are set to broadband polarization due to global or deep-seated magnetic fields. For a double-toroidal pattern a differential measure is found, q sub b = (q sub ne + q sub sw - q sub nw - q sub - se) 14, at 1.7 mu, of (+1.2 + or = 0.7) x 10 to the minus 7th power a mean from three series in 1981. Based on a simple estimate by L. Biermann this would correspond to deep-down toroidal fields of or approx 2000 gauss. Extension of this work are discussed.

Kemp, J. C.↗

Vortex motion behind a circular cylinder

Vortex motion behind a circular cylinder moving through water is discussed. It is shown that a pair of vortices form behind a moving cylinder and that their centers will move along a predictable curve. This curve represents an equilibrium condition which, however, is subject to perturbation. The stability of the vortex pair is investigated. Movement of the vortex pair away from the cylinder is calculated as an explanation of the resistance of the cylinder. Finally, the principles elaborated are applied to the flow around a flat plate.

Foeppl, L.↗

Sound diffraction at wall impedance discontinuities in a circular cylinder, investigated using Wiener-Hopf technique

Rigorous solutions are presented for sound diffraction in a circular cylinder with axial discontinuities of the wall admittance (or impedance). Analytical expressions are derived for the reflection and the transmission coefficients for duct modes. The results are discussed quantitatively in the limits of small admittance shifts (delta) and of low frequencies (ka). One of the results is the low frequency behavior of the reflection coefficient R(o) sub 00 of the fundamental mode. For the mode of a hardwall duct reflected from the junction with a softwall duct, (R(o) sub oo yields - (1-square root of (ka) square root of (2/i delta)); this result is in contrast to the frequency dependence of the reflection from the open end of a hardwall duct, for which R(o) sub oo yields - 1-(ka) squared/2 .

Cho, Y. C.↗

Geometrical analysis of circular-cut spiral bevel gears

Geometrical studies of circular cut spiral bevel gears are reported. Tooth profile changes heel to toe are studied in the transverse plane. Pressure angle changes are determined. The radiuses of curvature of the tooth surfaces generated by various cutter profiles are also determined. The consequences of cutter profile changes are explored. Crown gears are emphasized and the implications for conical gears are discussed.

Huston, R. L.↗

The dominant coherent structure of the circular jet organized by controlled perturbation

The dominant large-scale coherent structure of a circular jet has been organized through controlled perturbation at the jet Strouhal number of 0.3, induced acoustically in two air jets through cavity resonance. Selected phases of the coherent structure were studied for three Reynolds numbers (25,000; 55,000; and 110,000), and two limiting initial conditions; laminar and fully turbulent initial boundary layers. Distributions of phase-average structure properties, i.e., longitudinal and lateral velocities, coherent vorticity and Reynolds stress, phase-random turbulence intensities and Reynolds stress, and streamline and pseudo-streamfunction patterns are obtained. The phase-random turbulence intensity is greatest at the structure center where the coherent vorticity is also the maximum. Some properties of the structure show mild but systematic dependence on Reynolds number.

Zaman, K. B. M. Q.↗

Linearized transfer between inclined circular orbits using low-thrust blow down propulsion system

Noncoplanar transfers between neighboring circular orbits are presented for spacecraft using their own low-thrust blow down propulsion system. It is assumed that the out-of-plane angle between the decaying thrust vector and the current orbit plane remains constant for each extended burn. Switching conditions are derived for the cutoff and relight of the propulsion system in order to carry out a given transfer with inclination change. Furthermore the location where the thrust acceleration is initially applied with respect to the line of nodes of the two orbits is uniquely determined. Finally an analytic derivation of the linearized coplanar motion for stationkeeping and terminal rendezvous studies is also presented and a scheme for deriving the second order correction shown.

Kechichian, J. A.↗

Analysis of progressive damage in thin circular laminates due to static-equivalent impact loads

Clamped circular graphite/epoxy plates (25.4, 38.1, and 50.8 mm radii) with an 8-ply quasi-isotropic layup were analyzed for static-equivalent impact loads using the minimum-total-potential-energy method and the von Karman strain-displacement equations. A step-by-step incremental transverse displacement procedure was used to calculate plate load and ply stresses. The ply failure region was calculated using the Tsai-Wu criterion. The corresponding failure modes (splitting and fiber failure) were determined using the maximum stress criteria. The first-failure mode was splitting and initiated first in the bottom ply. The splitting-failure thresholds were relatively low and tended to be lower for larger plates than for small plates. The splitting-damage region in each ply was elongated in its fiber direction; the bottom ply had the largest damage region. The calculated damage region for the 25.4-mm-radius plate agreed with limited static test results from the literature.

Shivakumar, K. N.↗

Turbulent heat transfer in the separated reattached and redevelopment regions of a circular tube

A numerical study is reported on a flow in a circular pipe with an abrupt expansion. In this paper the behavior of flow in the domain including recirculating and redeveloping regions has been reviewed carefully and a new grid system is employed which provides finer grids in the recirculating region and monotonically expanding grids in the redeveloping region. The predicted results were improved for the class of this flow by incorporating and adapting the low-Reynolds number model of turbulence throughout the solution domain. The computational results obtained by the present model generally are better than the former results of the authors, particularly in the prediction of the reattachment points.

Amano, R. S.↗

Vibrations of cantilevered circular cylindrical shells Shallow versus deep shell theory

Free vibrations of cantilevered circular cylindrical shells having rectangular planforms are studied in this paper by means of the Ritz method. The deep shell theory of Novozhilov and Goldenveizer is used and compared with the usual shallow shell theory for a wide range of shell parameters. A thorough convergence study is presented along with comparisons to previously published finite element solutions and experimental results. Accurately computed frequency parameters and mode shapes for various shell configurations are presented. The present paper appears to be the first comprehensive study presenting rigorous comparisons between the two shell theories in dealing with free vibrations of cantilevered cylindrical shells.

Lee, J. K.↗

Measurements of compressible secondary flow in a circular S-duct

This paper presents the results of an experimental study of secondary flow in a circular cross section 30 deg - 30 deg S-duct with entrance Mach number of 0.6. Local flow velocity vectors have been measured along the length of the duct at six stations. These measurements have been made using a five-port cone probe. Static and total pressure profiles in the transverse planes are obtained from the cone probe measurements. Wall static pressure measurements along three azimuth angles of 0 deg, 90 deg, and 180 deg along the duct are also made. Contour plots presenting the three dimensional velocity field as well as the total- and static-pressure fields are obtained. Surface oil flow visualization technique has been used to provide details of the flow on the S-duct boundaries. The experimental observations have been compared with typical computational results.

Vakili, A.↗

An experimental investigation of multiple shock wave/turbulent boundary layer interactions in a circular duct

Detailed pitot, static and wall pressure measurements have been obtained for multiple shock wave/turbulent boundary layer interactions in a circular duct at a free-stream Mach number of 1.49 and at a unit Reynolds number of 4.90 x 10 to the 6th per meter. The details of the flow field show the formation of a series of normal shock waves with successively decreasing strength and with decreasing distance between the successive shock waves. The overall pressure recovery is much lower than the single normal shock pressure recovery at the same free-stream Mach number. A one-dimensional flow model based on the boundary layer displacement buildup is postulated to explain the formation of a series of normal shock waves.

Om, D.↗

Scattering from randomly oriented circular discs with application to vegetation

A vegetation layer is modeled by a collection of randomly oriented circular discs over a half space. The backscattering coefficient from such a half space is computed using the radiative transfer theory. It is shown that significantly different results are obtained from this theory as compared with some earlier investigations using the same modeling approach but with restricted disc orientations. In particular, the backscattered cross-polarized returns cannot have a fast increasing angular trend which is inconsistent with measurements. By setting the appropriate angle of orientation to zero the theory reduces to previously published results. Comparisons are shown with measurements taken from milo, corn and wheat and good agreements are obtained for both polarized and cross-polarized returns.

Karam, M. A.↗

Green's function solution and applications for cracks emanating from a circular hole in an infinite sheet

Stress-intensity factors are obtained for point loaded equal length cracks emanating from a circular hole in an infinite plate. A series approach and the Muskhelishvili formulation in the two-dimensional theory of elasticity are used to derive the solution. The applicability of the solution is demonstrated by using it as a Green's function to obtain stress-intensity factors in the case of (1) biaxial tension and pure shear of an infinite plate and (2) tension and pin loading of a plate with cracks emanating from one hole in a row of holes.

Shivakumar, V.↗

Circularly-Polarized Microstrip Antenna

Microstrip construction compact for mobile applications. Circularly polarized microstrip antenna made of concentric cylindrical layers of conductive and dielectric materials. Coaxial cable feedlines connected to horizontal and vertical subelements from inside. Vertical subelement acts as ground for horizontal subelement.

Stanton, P. H.↗

Prediction of impact force and duration during low velocity impact on circular composite laminates

Two simple and improved models--energy-balance and spring-mass--were developed to calculate impact force and duration during low velocity impact of circular composite plates. Both models include the contact deformation of the plate and the impactor as well as bending, transverse shear, and membrane deformations of the plate. The plate was transversely isotropic graphite/epoxy composite laminate and the impactor was a steel sphere. Calculated impact forces from the two analyses agreed with each other. The analyses were verified by comparing the results with reported test data.

Shivakumar, K. N.↗

An empirical method for predicting the mixing noise levels of subsonic circular and coaxial jets

An empirical method for predicting the static free field source noise levels of subsonic circular and coaxial jet flow streams is presented. The method was developed from an extensive data base of 817 jet tests obtained from five different government and industry sources in three nations. The prediction method defines the jet noise in terms of four components which are overall power level, power spectrum level, directivity index, and relative spectrum level. The values of these noise level components are defined on a grid consisting of seven frequency parameter values (Strouhal numbers) and seven directivity angles. The value of the noise level at each of these grid points is called a noise level coordinate and was defined as a function of five jet exhaust flow state parameters which are equivalent jet velocity, equivalent jet total temperature, the velocity ratio (outer stream to inner stream), temperature ratio, and area ratio. The functions were obtained by curve fitting in a least squares sense the noise level coordinates from the data base in a five dimensional flow state space using a third order Taylor series. The noise level coordinates define the component noise levels for all frequencies and directivities through a bicubic spline function.

Russell, J. W.↗

Steady viscous flow past a circular cylinder

Viscous flow past a circular cylinder becomes unstable around Reynolds number Re = 40. With a numerical technique based on Newton's method and made possible by the use of a supercomputer, steady (but unstable) solutions have been calculated up to Re = 400. It is found that the wake continues to grow in length approximately linearly with Re. However, in conflict with available asymptotic predictions, the width starts to increase very rapidly around Re = 300. All numerical calculations have been performed on the CDC CYBER 205 at the CDC Service Center in Arden Hills, Minnesota.

Fornberg, B.↗

Effect of a rotor wake on heat transfer from a circular cylinder

The effect of a rotor wake on heat transfer to a downstream stator was investigated. The rotor was modeled with a spoked wheel of 24 circular pins 1.59 mm in diameter. One of the stator pins was electrically heated in the midspan region and circumferentially averaged heat transfer coefficients were obtained. The experiment was run in an annular flow wind tunnel using air at ambient temperature and pressure. Reynolds numbers based on stator cylinder diameter ranged from .001 to .00001. Rotor blade passing frequencies ranged from zero to 2500 Hz. Stationary grids were used to vary the rotor inlet turbulence from one to four percent. The rotor-stator spacings were one and two stator pin diameters. In addition to the heat transfer coefficients, turbulence spectra and ensemble averaged wake profiles were measured. At the higher Reynolds numbers, which is the primary range of interest for turbulent heat transfer, the rotor wakes increased Nusselt number from 10 to 45 percent depending on conditions. At lower Reynolds numbers the effect was as much as a factor of two.

Simoneau, R. J.↗