Search NASA⌕ Search

SEARCH · Search NASA

Results for “coupling coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Modulation of springtime surface sensible heating over the Tibetan Plateau on the interannual variability of East Asian dust cycle

Previous observational evidence and numerical simulations have revealed that the surface sensible heating in spring (March–April–May, MAM) over the Tibetan Plateau (TPSH) can affect the Asian regional hydrological cycle, surface energy balance, and climate through altering atmospheric heat source of the Tibetan Plateau (TP). This study aims to investigate the impacts of MAM TPSH on the interannual variability of East Asian dust cycle by using CAM4-BAM (version 4 of the Community Atmosphere Model coupled to a bulk aerosol model), MERRA-2 (version 2 of the Modern-Era Retrospective analysis for Research and Applications) surface dust concentration, and TPSH measurements. Our simulations show that the surface dust concentrations over the East Asian (EA) dust source region and over the northwestern Pacific (NP) in MAM are significantly positively correlated with TPSH, with regionally averaged correlation coefficients of 0.49 for EA and 0.44 for NP. Similar positive correlations are also shown between the MAM TPSH measurements averaged over the 73 observation sites and the surface dust concentration from MERRA-2. Simulation-based comparisons between strongest and weakest TPSH years reveal that, the MAM surface dust concentration in the strongest TPSH years increases with relative differences of 13.1 % over EA and 36.9 % over NP. These corresponding differences are found in MERRA-2 with 22.9 % and 13.3 % over EA and NP, respectively. Further simulated results show that the processes of whole dust cycles (e.g., dust loading, emission, and transport, as well as dust deposition) are also significantly enhanced during the strongest TPSH years over EA and NP. Through enhancing the TP heat source, stronger TPSH in MAM generates an anticyclonic anomaly in middle and upper troposphere over the TP and over the downstream Pacific region, respectively. These atmospheric circulation anomalies induced by the increased TPSH result in increasing the westerly winds over both EA and NP, which in turn increases dust emissions over the dust source, and dust transport over these two regions, as well as the regional dust cycles. These results suggest that addressing the East Asian dust changes in the future climates requires considering not only increasing greenhouse gas emissions but also the variations of the TP's heat source under global warming.

54 ENVIRONMENTAL SCIENCES↗

FLiBe Radiative Heat Transfer

The liquid fluoride salt, FLiBe (2LiF-BeF2), has been proposed as a working fluid for Fluoride-Salt-Cooled High-Temperature Reactor (FHR) due to its desirable heat transport properties at high temperatures (500-700°C) as well as compatibility with graphite and several metals [1]. Due to the 4th power temperature dependence and the high temperature differences present in the various FHR heat exchangers (TCHX, DHX, and CTAH), radiative heat transfer in molten salt FLiBe may be important compared to natural or forced convection. Furthermore, because of the strong coupling between the temperature and velocity profiles, emission and absorption of radiation within the salt may significantly impact the thermal and hydrodynamic behavior of the fluid in the natural circulation systems of FHR. The present work investigates the significance of radiative transfer within the salt on the overall thermal energy conservation equation, and consequently the overall convective and radiative heat transfer coefficient. The purpose is to understand the radiative heat transfer effect on the steady-state energy equation for a moving salt in a 2D channel by computing a total Nusselt number that incorporates both radiation and convection. Moreover, the evolution of the thermal entrance region is of a particular importance because of the high heat transfer coefficients attainable and the effect on the potential onset of various salt physical phenomena, like freezing and supercooling, as well as on the design of the passive decay heat removal systems of FHR, which are mostly buoyancy-driven pipe flow systems.

Derdeyn, Will↗

Strain Effects on Rashba Spin–Orbit Coupling of 2D Hole Gases in GeSn/Ge Heterostructures

A demonstration of 2D hole gases in GeSn/Ge heterostructures with a mobility as high as 20 000 cm 2 V –1 s –1 is given. Both the Shubnikov–de Haas oscillations and integer quantum Hall effect are observed, indicating high sample quality. The Rashba spin-orbit coupling (SOC) is investigated via magneto-transport. Further, a transition from weak localization to weak anti-localization is observed, which shows the tunability of the SOC strength by gating. The magneto-transport data are fitted to the Hikami–Larkin–Nagaoka formula. The phase-coherence and spin-relaxation times, as well as spin-splitting energy and Rashba coefficient of the k-cubic term, are extracted. Furthermore, the analysis reveals that the effects of strain and confinement potential at a high fraction of Sn suppress the Rashba SOC caused by the GeSn/Ge heterostructures.

36 MATERIALS SCIENCE↗

Electronic Properties and Lattice Dynamics Studies of the Nickel-Based Superconductor ThNiAsN

We perform theoretical studies of the newly discovered nickel-based pnictide ThNiAsN. The obtained large density of states may explain the normal-state Sommerfeld coefficient observed by former experiments. The obtained band structure and Fermi surfaces are rather two-dimensional with a small hole-like Fermi surface around X point and three electron-like ones around M point, which share great similarities with LaNiAsO. Meanwhile, the lattice dynamics of ThNiAsN are also studied within density functional perturbation theory (DFPT). The electron-phonon coupling constant is 0.67, suggesting that ThNiAsN is a phonon-mediated superconductor. In the end, as a prototype of nickel-based superconductor, we obtain an effective tight-binding model by means of the maximally localized Wannier function (MLWF). Based on this model, the nesting properties have been studied using Lindhard function for nominal doping and hole doping. We find the hole doping will introduce better nesting properties, making this system a potential candidate to develop magnetic and unconventional superconducting instabilities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental investigation of density behaviors in front of the lower hybrid launcher in experimental advanced superconducting tokamak

A triple Langmuir probe is mounted on the top of the Lower Hybrid (LH) antenna to measure the electron density near the LH grills in Experimental Advanced Superconducting Tokamak. In this work, the LH power density ranges from 2.3 MWm{sup −2} to 10.3 MWm{sup −2} and the rate of puffing gas varies from 1.7 × 10{sup 20} el/s to 14 × 10{sup 20} el/s. The relation between the edge density (from 0.3 × n{sub e-cutoff} to 20 × n{sub e-cutoff}, where n{sub e-cutoff} is the cutoff density, n{sub e-cutoff} = 0.74 × 10{sup 17} m{sup −3} for 2.45 GHz lower hybrid current drive) near the LH grill and the LH power reflection coefficients is investigated. The factors, including the gap between the LH grills and the last closed magnetic flux surface, line-averaged density, LH power, edge safety factor, and gas puffing, are analyzed. The experiments show that injection of LH power is beneficial for increasing edge density. Gas puffing is beneficial for increasing grill density but excess gas puffing is unfavorable for coupling and current drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The unusual symmetry of hexafluoro-o-xylene—A microwave spectroscopy and computational study

The rotational constants and quartic centrifugal distortion coefficients of hexafluoro-o-xylene were precisely derived from the 8 GHz to 18 GHz gas phase microwave spectrum. In addition, the rotational constants of all singly substituted 13 C isotopologues were determined. Instead of the intuitively expected symmetry of C 2v , as in o-xylene, calculations with a variety of methods (B3LYP, CAM-B3LYP, ωB97XD, MP2, and coupled-cluster singles, doubles, and perturbative triples) predict a C 2 symmetry structure in which the two CF 3 groups rotate in opposite directions by about 16°. While the experimental results in this study are not capable of proving this unusual symmetry, they can support future microwave, gas phase electron diffraction or nuclear magnetic resonance studies. From the presented data, a preliminary r 0 structure was determined, reproducing the experimental rotational constants with deviations of no more than 15 kHz. Analysis of the interactions between the two CF 3 groups using an effective fragment potential approach identifies two major contributions to their interaction, due to exchange-repulsion and electrostatic repulsion, with electrostatic repulsion responsible for the barrier at the C 2v geometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heavy flavor quenching and flow: the roles of initial condition, pre-equilibrium evolution, and in-medium interaction

Within an advanced Langevin-hydrodynamics framework coupled to a hybrid fragmentation-coalescence hadronization model, we study heavy flavor quenching and flow in relativistic heavy-ion collisions. We investigate how the initial heavy quark spectrum, the in-medium energy loss and hadronization mechanisms of heavy quarks, the evolution profile of the pre-equilibrium stage, the medium flow, and the temperature dependence of heavy quark diffusion coefficients influence the suppression and elliptic flow of heavy mesons at the RHIC and the LHC. Our results show that the different modeling of initial conditions, pre-equilibrium evolution, and in-medium interactions can individually yield uncertainties of approximately 10-40% in D meson suppression and flow at a low transverse momentum. Furthermore, we also find that proper combinations of collisional versus radiative energy loss, coalescence versus fragmentation in hadronization, and the inclusion of medium flow are the most important factors for describing the suppression and elliptic flow of heavy mesons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

CP violation and kaon-pion interactions in B{yields}K{pi}{sup +}{pi}{sup -} decays

We study CP violation and the contribution of the strong kaon-pion interactions in the three-body B{yields}K{pi}{sup +}{pi}{sup -} decays. We extend our recent work on the effect of the two-pion S- and P-wave interactions to that of the corresponding kaon-pion ones. The weak amplitudes have a first term derived in QCD factorization and a second one as a phenomenological contribution added to the QCD penguin amplitudes. The effective QCD coefficients include the leading order contributions plus next-to-leading order vertex and penguins corrections. The matrix elements of the transition to the vacuum of the kaon-pion pairs, appearing naturally in the factorization formulation, are described by the strange K{pi} scalar (S-wave) and vector (P-wave) form factors. These are determined from Muskhelishvili-Omnes coupled channel equations using experimental kaon-pion T-matrix elements, together with chiral symmetry and asymptotic QCD constraints. From the scalar form factor study, the modulus of the K{sub 0}*(1430) decay constant is found to be (32{+-}5) MeV. The additional phenomenological amplitudes are fitted to reproduce the K{pi} effective mass and helicity angle distributions, the B{yields}K*(892){pi} branching ratios and the CP asymmetries of the recent data from Belle and BABAR collaborations. We use also the new measurement by the BABAR group of the phase difference between the B{sup 0} and B{sup 0} decay amplitudes to K*(892){pi}. Our predicted B{sup {+-}}{yields}K{sub 0}*(1430){pi}{sup {+-}}, K{sub 0}*(1430){yields}K{sup {+-}}{pi}{sup {+-}} branching fraction, equal to (11.6{+-}0.6)x10{sup -6}, is smaller than the result of the analyzes of both collaborations. For the neutral B{sup 0} decays, the predicted value is (11.1{+-}0.5)x10{sup -6}. In order to reduce the large systematic uncertainties in the experimental determination of the B{yields}K{sub 0}{sup *}(1430){pi} branching fractions, a new parametrization is proposed. It is based on the K{pi} scalar form factor, well constrained by theory and experiments other than those of B decays.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Coupled Neutron and Gamma Heating Calculation Based on VARIANT Nodal Transport Method

Accurate determination of temperature distributions in fuel pins and duct walls is essential for fuel-pin performance and assembly bowing analyses. Currently, the multi-assembly, sub-channel analysis code SE2-ANL is used in thermalhydraulic analysis of sodium cooled fast reactors (SFR). SE2- ANL is interfaced with the DIF3D/GAMSOR/DIF3D procedure for coupled neutron and gamma heating calculations, developed at Argonne National Laboratory (ANL). In this procedure, the neutron flux distribution is first calculated using the finite-difference diffusion theory option of the DIF3D code. Using the neutron flux solution, the GAMSOR code computes the gamma source distribution for the subsequent gamma flux calculation with DIF3D. However, in the current heating calculation scheme, the neutron and gamma flux calculations are limited to six triangular meshes per hexagonal assembly. In addition, the pin power distributions are estimated by assuming that the power distribution within an assembly is separable in the radial and axial directions. In each assembly, the axial power profile is obtained by averaging the power densities of six triangular meshes at each axial mesh interval. The radial power profile is evaluated at a single axial mesh (e.g., at the core mid-plane) by approximating the neutron and gamma flux distributions by a linear or quadratic polynomial of two variables x and y, depending on the polynomial order specified by the user. The coefficients of the linear and quadratic polynomials are determined by the least squares fit of six and 24 triangular mesh fluxes, respectively. Furthermore, the total heat generation rate in an assembly duct wall is simply determined by a user-specified fraction of the total gamma heating within that assembly. With the advancement of computer technology, the nodal transport theory code VARIANT is routinely used in core design analyses of SFR instead of DIF3D. It is therefore necessary to develop a new heating calculation procedure based on VARIANT neutron and gamma transport calculations. In this study, a new, coupled neutron and gamma heating calculation scheme has been developed to determine the pin power distributions more accurately by eliminating the aforementioned limitations of the current procedure. For this, the GAMSOR code has been extended to generate the intra-nodal gamma source distribution to be consistent with the trial functions of VARIANT. In the new heating calculation procedure, the neutron flux distribution is determined first by solving an eigenvalue transport problem using VARIANT. The obtained neutron flux is then used in GAMSOR to calculate the gamma source distribution. Using this gamma source distribution, the gamma flux distribution is determined by solving a fixed-source transport problem using VARIANT again. Using the computed neutron and gamma flux distributions, the power distribution in each fuel pin and duct wall is determined using a new utility code CURVE, which has been developed to evaluate the VARIANT flux solution at each fuel pin position and along the duct mid-wall. For each pin segment contained in a VARIANT node, the axial power shape is represented as a quadratic profile. The performance of the new heating calculation scheme based on VARIANT transport solutions has been tested against the existing method of SE2-ANL, using the ABR-1000 metal core design. The gamma source distribution and the assembly, fuel pin and duct wall power distributions were calculated and compared. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fermi surface in the absence of a Fermi liquid in the Kondo insulator SmB 6

The search for a Fermi surface in the absence of a conventional Fermi liquid has thus far yielded very few potential candidates. Among promising materials are spin-frustrated Mott insulators near the insulator–metal transition, where theory predicts a Fermi surface associated with neutral low-energy excitations. In this paper, we reveal another route to experimentally realize a Fermi surface in the absence of a Fermi liquid by the experimental study of a Kondo insulator SmB 6 positioned close to the insulator–metal transition. We present experimental signatures down to low temperatures (<<1 K) associated with a Fermi surface in the bulk, including a sizeable linear specific heat coefficient, and on the application of a finite magnetic field, bulk magnetic quantum oscillations, finite quantum oscillatory entropy, and substantial enhancement in thermal conductivity well below the charge gap energy scale. Finally, the weight of evidence indicates that despite an extreme instance of Fermi liquid breakdown in Kondo insulating SmB 6 , a Fermi surface arises from novel itinerant low-energy excitations that couple to magnetic fields, but not weak DC electric fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison between experiment and simulation for argon inductively coupled plasma

In order to include the nonlocal characteristics of electrons and investigate the inductively coupled plasma (ICP) resources more completely, we have developed a hybrid Monte Carlo (MC)/fluid hybrid model and calculated the axial and radial distributions of electron density, electron temperature, plasma potential, and electron energy distribution functions (EEDFs) of Ar discharge in a planar ICP. Furthermore, to make the model more practical, we still incorporate the effects of metastable atoms, whose sets of rate coefficients and density are, respectively, calculated through the electron MC part and fluid module. Besides, the corresponding Langmuir probe measurements are used to compare these data to validate the simulated results. Under all the selected discharge powers and pressures, the theoretically simulated and experimentally measured quantity profiles agree reasonably with each other, embodied in the generally identical magnitude ranges and spatial distributions. Furthermore, the interpretations about their detailed differences are given, which are based on the designs of both experimental schematic and model configuration. The analysis implements that the inclusions of electron-electron collision and a neutral density distribution into the hybrid model are likely to improve the comparison between the model predictions and experiment diagnostics. Furthermore, the evolution of plasma parameters and EEDFs with discharge conditions is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The all configuration mean energy multiconfiguration self-consistent-field method. I. Equal configuration weights

The All Configuration Mean Energy (ACME) conditions are a special case of state averaging for Multiconfigurational Self-Consistent-Field (MCSCF) orbital optimisation. The method is formulated using the Graphical Unitary Group Approach (GUGA) in which the Configuration State Function (CSF) basis is represented as walks within a Shavitt graph. This graphical formulation leads to efficient recursive algorithms for the energy and reduced density matrices (RDM) that are independent of the CSF dimension and that scale only as O(n2) where n is the number of occupied orbitals. The Hamiltonian matrix diagonalization step is obviated and the CSF expansion coefficients are neither referenced nor required. This allows MCSCF orbital optimisation to be performed for essentially unlimited numbers of active orbitals and arbitrarily large CSF expansions. The discussion includes various types of CSF expansion spaces, the partitioning of the essential and redundant orbital optimisation parameters, the computation of the spin-density, and the formulation of state-specific analytic gradients and nonadiabatic coupling for high-level electronic structure methods that use the ACME MCSCF orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature dependence of magnetic anisotropy and magnetoelasticity from classical spin-lattice calculations

Here we present a classical molecular-spin dynamics (MSD) methodology that enables accurate computations of the temperature dependence of the magnetocrystalline anisotropy as well as magnetoelastic properties of magnetic materials. The nonmagnetic interactions are accounted for by a spectral neighbor analysis potential (SNAP) machine-learned interatomic potential, whereas the magnetoelastic contributions are accounted for using a combination of an extended Heisenberg Hamiltonian and a Néel pair interaction model, representing both the exchange interaction and spin-orbit-coupling effects, respectively. All magnetoelastic potential components are parameterized using a combination of first-principles and experimental data. Our framework is applied to the α phase of iron. Initial testing of our MSD model is done using a 0 K parametrization of the Néel interaction model. After this, we examine how individual Néel parameters impact the $B$ 1 and $B$ 2 magnetostrictive coefficients using a moment-independent δ sensitivity analysis. The results from this study are then used to initialize a genetic algorithm optimization which explores the Néel parameter phase space and tries to minimize the error in the B 1 and B 2 magnetostrictive coefficients in the range of 0–1200 K. Our results show that while both the 0 K and genetic algorithm optimized parametrization provide good experimental agreement for $B$ 1 and $B$ 2 , only the genetic algorithm optimized results can capture the second peak in the $B$ 1 magnetostrictive coefficient which occurs near approximately 800 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structure of human CRMP-4: correction of intensities for lattice-translocation disorder

Crystals of human CRMP-4 showed severe lattice-translocation disorder. Intensities were demodulated using the so-called lattice-alignment method and a new more general method with simplified parameterization, and the structure is presented. Collapsin response mediator proteins (CRMPs) are cytosolic phosphoproteins that are mainly involved in neuronal cell development. In humans, the CRMP family comprises five members. Here, crystal structures of human CRMP-4 in a truncated and a full-length version are presented. The latter was determined from two types of crystals, which were either twinned or partially disordered. The crystal disorder was coupled with translational NCS in ordered domains and manifested itself with a rather sophisticated modulation of intensities. The data were demodulated using either the two-lattice treatment of lattice-translocation effects or a novel method in which demodulation was achieved by independent scaling of several groups of intensities. This iterative protocol does not rely on any particular parameterization of the modulation coefficients, but uses the current refined structure as a reference. The best results in terms of R factors and map correlation coefficients were obtained using this new method. The determined structures of CRMP-4 are similar to those of other CRMPs. Structural comparison allowed the confirmation of known residues, as well as the identification of new residues, that are important for the homo- and hetero-oligomerization of these proteins, which are critical to nerve-cell development. The structures provide further insight into the effects of medically relevant mutations of the DPYSL-3 gene encoding CRMP-4 and the putative enzymatic activities of CRMPs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Apparent fine tunings for field theories with broken space-time symmetries

We exhibit a class of effective field theories that have hierarchically small Wilson coefficients for operators that are not protected by symmetries but are not finely tuned. These theories possess bounded target spaces and vacua that break space-time symmetries. We give a physical interpretation of these theories as generalized solids with open boundary conditions. We show that these theories realize unusual RG flows where higher dimensional (seemingly irrelevant) operators become relevant even at weak coupling. Finally, we present an example of a field theory whose vacuum energy relaxes to a hierarchically small value compared to the UV cut-off.

Physics↗

High-Fidelity Computational Studies of Intermediate Pressure Capacitively Coupled Plasmas

This report discussed progress made in the development of a computational model for intermediate pressure capacitively coupled plasma discharge. A new full fidelity argon chemistry model has been developed that includes electron, argon ion, three lumped states for electronically excited species, and the background ground state argon. As such the mechanism has been validated over a wide range of intermediate pressure conditions from 100 mTorr to a few Torr. Uncertainties in the electron impact cross sections and the rate coefficients for the reactions are propagated through the model to establish uncertainties that emerge in the model due the reaction mechanism and its impact on the discharge properties. The model is therefore validated in face of uncertainties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Negative thermal expansion coefficient and amorphization in defective 4H-SiC

This paper presents thermal expansion coefficient (TEC) and amorphization in 4H-SiC containing point defects at different concentrations. We considered vacancy defects, interstitial defects, and Frenkel pair defects and investigated the thermomechanical response of the lattice over a wide range of temperatures using classical molecular dynamics simulations. The results show that 4H-SiC with vacancy defects exhibits a negative TEC above a critical defect density of around 9% (irrespective of the temperature). With interstitial defects, it exhibits a positive TEC (regardless of the defect density), and with Frenkel pair defects it shows a transition from positive TEC to negative TEC for a defect density greater than 8%. The coupling between temperature-induced expansion and defect-introduced stress in the lattice forms the mechanistic basis for the observed variation in TEC. Furthermore, the specific heat decreases rapidly with an increase in defect density at room temperature, with the highest sensitivity of the lattice observed for the Frenkel pair defects followed by interstitial defects and then by vacancy defects. Finally, these findings highlight the critical implications of defects on thermal expansion behavior of 4H-SiC with applications in radiation environments.

36 MATERIALS SCIENCE↗

Scaling of silicon nanoparticle growth in low temperature flowing plasmas

Low temperature plasmas are an emerging method to synthesize high quality nanoparticles (NPs). An established and successful technique to produce NPs is using a capacitively coupled plasma (CCP) in cylindrical geometry. Although a robust synthesis technique, optimizing or specifying NP properties using CCPs, is challenging. In this paper, results from a computational investigation for the growth of silicon NPs in flowing inductively coupled plasmas (ICPs) using Ar/SiH 4 gas mixtures of up to a few Torr are discussed. ICPs produce more locally constrained and quiescent plasma potentials. These positive plasma potentials produce an electrostatic trap for negatively charged NPs, which can significantly extend the residence time of NPs in the plasma, which in turn provides a controllable period for particle growth. The computational platforms used in this study consist of a two-dimensional plasma hydrodynamics model, a three-dimensional nanoparticle growth and trajectory tracking model, and a molecular dynamics simulation for deriving reactive sticking coefficients of silane radicals on Si NPs. Trends for the nanoparticle growth as a function of SiH 4 inlet fraction, gas residence time, energy deposition per particle, pressure, and reactor diameter are discussed. The general path for particle synthesis is the trapping of small NPs in the positive electrostatic potential, followed by entrainment in the gas flow upon reaching a critical particle size. Optimizing or controlling NP synthesis then depends on the spatial distribution of plasma potential, the density of growth species, and the relative time that particles spend in the electrostatic trap and flowing through higher densities of growth species upon leaving the trap.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗