Search NASA⌕ Search

SEARCH · Search NASA

Results for “delta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Mass-energy radiative transfer and momentum extraction by gravitational wave emission in the collision of two black holes

We examine numerically the head-on collision of two boosted Schwarzschild black holes, in the realm of Robinson-Trautman spacetimes. Characteristic initial data for the system are constructed and the Robinson-Trautman equation is integrated for these data using a numerical code based on the Galerkin-collocation method. The initial data already have a common horizon so that the evolution covers the post-merger regime up to the final configuration, when the gravitational wave emission ceases. In the nonlinear regime gravitational waves are emitted, extracting mass and linear momentum from the system. The final configuration is a boosted Schwarzschild black hole with rest mass larger than the masses of the two individual initial black holes, and with a smaller final boost parameter characterizing the recoil velocity of the remnant. The efficiency {Delta} of the mass-energy extraction by gravitational waves is evaluated. The points ({Delta},y), where y is the (normalized) rest mass of the remnant black hole, satisfy a nonextensive Tsallis distribution with entropic index q{approx_equal}1/2 for y < or approx. 12. Beyond y{approx}12 the experimental points deviate from the distribution function and the efficiency presents an absolute maximum for the case of equally massive individual colliding black holes; the remnant has no recoil in this case. By using the Bondi mass formula we also evaluate the total energy E{sub W} carried out by gravitational waves as well as the radiative corrections to the efficiency. E{sub W} increases monotonically with y and the experimental points (E{sub W},y) also satisfy a nonextensive Tsallis distribution but with q{approx_equal}2/3, up to y{approx}14.2. Beyond this value the experimental points increase faster than the distribution function. For any initial infalling velocity v, the distribution of momentum of the remnant exhibits a maximum at {alpha}{sub 1}={alpha}{sub m{approx_equal}}0.667, where {alpha}{sub 1} is related to the ratio of pre-merger rest masses, and has a one-to-one correspondence with y for fixed v. Two distinct regimes of gravitational wave emission can be characterized according to (i) {alpha}{sub 1}<{alpha}{sub m}: bursts of gravitational bremsstrahlung; (ii) {alpha}{sub 1}>{alpha}{sub m}: quiescent long time emission of gravitational waves. This picture is also sustained by the analysis of the time behavior of the power emitted (dE{sub W}/du).

79 ASTRONOMY AND ASTROPHYSICS↗

Small-scale production of bespoke accelerated aging plutonium alloy

Here, this study demonstrates the 100 g scale manufacture of a plutonium alloy that ages at an accelerated rate. The resulting alloy ages six times faster than typical weapons-grade plutonium due to the addition of 238 Pu. As a major innovation, the process involved using a partial direct oxide reduction technique. This method was achieved by developing a new, complex geometry stirrer using additive manufacturing to reduce the 238Pu oxide and efficiently incorporate it into weapons-grade plutonium metal. The material was then purified by molten salt extraction and electrorefining before being alloyed with gallium. The alloy was then cold-rolled and annealed in a homogenization heat treatment. The resulting disk was characterized by metallography and differential scanning calorimetry, and the impurity content was determined using analytical chemistry techniques. The results show that a homogeneous delta phase plutonium alloy was achieved with expected microstructure and minimal impurities. This study was also successful in changing the plutonium isotopic composition by incorporating additional 238 Pu to accelerate the effects of radiation damage. This enables researchers to study long-term aging phenomena in a reduced time frame, thus avoiding the need for large-scale material production and circumventing the limitations of using naturally aged, archived plutonium.

Aging theory↗

Kharitonov's theorem: Generalizations and algorithms

In 1978, the Russian mathematician V. Kharitonov published a remarkably simple necessary and sufficient condition in order that a rectangular parallelpiped of polynomials be a stable set. Here, stable is taken to mean that the polynomials have no roots in the closed right-half of the complex plane. The possibility of generalizing this result was studied by numerous authors. A set, Q, of polynomials is given and a necessary and sufficient condition that the set be stable is sought. Perhaps the most general result is due to Barmish who takes for Q a polytope and proceeds to construct a complicated nonlinear function, H, of the points in Q. With the notion of stability which was adopted, Barmish asks that the boundary of the closed right-half plane be swept, that the set G is considered = to (j(omega)(bar) - infinity is less than omega is less than infinity) and for each j(omega)(sigma)G, require H(delta) is greater than 0. Barmish's scheme has the merit that it describes a true generalization of Kharitonov's theorem. On the other hand, even when Q is a polyhedron, the definition of H requires that one do an optimization over the entire set of vertices, and then a subsequent optimization over an auxiliary parameter. In the present work, only the case where Q is a polyhedron is considered and the standard definition of stability described, is used. There are straightforward generalizations of the method to the case of discrete stability or to cases where certain root positions are deemed desirable. The cases where Q is non-polyhedral are less certain as candidates for the method. Essentially, a method of geometric programming was applied to the problem of finding maximum and minimum angular displacements of points in the Nyquist locus (Q(j x omega)(bar) - infinity is less than omega is less than infinity). There is an obvious connection with the boundary sweeping requirement of Barmish.

Rublein, George↗

Non linear evolution of a second mode wave in supersonic boundary layers

Presented here are several direct simulations of one 2-D second mode perturbation wave, superimposed upon a prescribed mean flow. Periodicity is assumed in the streamwise direction (Fourier) and the variables are expanded in Chebyshev series in the direction normal to the flat plate. The code is fully explicit and is time advanced with a 3rd order Runge-Kutta scheme. The second mode wave (R delta prime = 8000), interacts with itself to generate higher streamwise harmonics. Physical parameters are chosen to maximize the linear growth rate at the prescribed Reynolds number. Initial results indicate that the nonlinear processes begin in the critical layer region and are the result of the cubic interactions in the momentum equations, rather than due to the higher streamwise harmonics. Analysis of the various terms in the momentum equations combined with numerical experiments in which various modes are artificially suppressed, lead to the conclusion that asymptotic methods will produce the saturated state in one or two order of magnitude less computer time than that required by the direct numerical simulations.

Erlebacher, Gordon↗

A Capillary Absorption Spectrometer for Stable Carbon Isotope Ratio (13C/12C) Analysis in Very Small Samples

A capillary absorption spectrometer (CAS) suitable for IR laser isotope analysis of small CO{sub 2} samples is presented. The system employs a continuous-wave (cw) quantum cascade laser to study nearly adjacent rovibrational transitions of different isotopologues of CO{sub 2} near 2307 cm{sup -1} (4.34 {mu}m). This initial CAS system can achieve relative isotopic precision of about 10 ppm {sup 13}C, or {approx}1{per_thousand} (per mil in delta notation relative to Vienna Pee Dee Belemnite) with 20-100 picomoles of entrained sample within the hollow waveguide for CO{sub 2} concentrations {approx}400 to 750 ppm. Isotopic analyses of such gas fills in a 1-mm ID hollow waveguide of 0.8 m overall physical path length can be carried out down to {approx}2 Torr. Overall {sup 13}C/{sup 12}C ratios can be calibrated to {approx}2{per_thousand} accuracy with diluted CO{sub 2} standards. A novel, low-cost method to reduce cw-fringing noise resulting from multipath distortions in the hollow waveguide is presented, which allows weak absorbance features to be studied at the few ppm level (peak-to-rms) after 1,000 scans are co-added in {approx}10 sec. The CAS is meant to work directly with converted CO{sub 2} samples from a Laser Ablation-Catalytic-Combustion (LA CC) micro-sampler to provide {sup 13}C/{sup 12}C ratios of small biological isolates with spatial resolutions {approx}50 {mu}m.

47 OTHER INSTRUMENTATION↗

How accurately can 21 cm tomography constrain cosmology?

There is growing interest in using 3-dimensional neutral hydrogen mapping with the redshifted 21 cm line as a cosmological probe. However, its utility depends on many assumptions. To aid experimental planning and design, we quantify how the precision with which cosmological parameters can be measured depends on a broad range of assumptions, focusing on the 21 cm signal from 6<z<20. We cover assumptions related to modeling of the ionization power spectrum, to the experimental specifications like array layout and detector noise, to uncertainties in the reionization history, and to the level of contamination from astrophysical foregrounds. We derive simple analytic estimates for how various assumptions affect an experiment's sensitivity, and we find that the modeling of reionization is the most important, followed by the array layout. We present an accurate yet robust method for measuring cosmological parameters that exploits the fact that the ionization power spectra are rather smooth functions that can be accurately fit by 7 phenomenological parameters. We find that for future experiments, marginalizing over these nuisance parameters may provide constraints almost as tight on the cosmology as if 21 cm tomography measured the matter power spectrum directly. A future square kilometer array optimized for 21 cm tomography could improve the sensitivity to spatial curvature and neutrino masses by up to 2 orders of magnitude, to {delta}{omega}{sub k}{approx_equal}0.0002 and {delta}m{sub {nu}}{approx_equal}0.007 eV, and give a 4{sigma} detection of the spectral index running predicted by the simplest inflation models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

New layer borate (Nd{sub 0.925}Na{sub 0.075})Nd[B{sub 9}O{sub 15}(OH){sub 2}]Cl{sub 0.85} . 2.65H{sub 2}O and its place in the structural systematics

Crystals of a new aqueous rare-earth borate-(Nd{sub 0.925}Na{sub 0.075})Nd[B{sub 9}O{sub 15}(OH){sub 2}]Cl{sub 0.85} . 2.65H{sub 2}O, space group P2/n-are obtained under hydrothermal conditions. The crystal structure is determined by the heavy-atom method without preliminary knowledge of the chemical formula. The independent anionic radical is a new corrugated layer related to layer pentaborates. Layers related by centers of inversion form sheets. Nd and Cl atoms are located in the intersheet space and in the large voids of the sheet. One of the positions of both Nd and Cl atoms is isomorphously shared with Na atoms and H{sub 2}O molecules, respectively. The new borate is characterized as a polyborate (megaborate) containing the {l_brace}(4:3[2T + {Delta}] + 1[{Delta}]){sub {infinity}} + (5[3T + 2{Delta}]){sub {infinity}}{r_brace}{sub {infinity}{infinity}} complex anionic radical. The topological variants of the completion of the layer by additional triangles and the connection of layers into a framework are considered. The relationship between the new borate and the earlier studied LaB{sub 5}O{sub 8}(OH){sub 2} . 1.5H{sub 2}O framework borate is revealed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measuring $\theta_{13}$ via Muon Neutrino to Electron Neutrino Oscillations in the MINOS Experiment

One of the primary goals in neutrino physics at the present moment is to make a measurement of the neutrino oscillation parameter $\theta_{13}$. This parameter, in addition to being unknown, could potentially allow for the introduction of CP violation into the lepton sector. The MINOS long-baseline neutrino oscillation experiment has the ability to make a measurement of this parameter, by looking for the oscillation of muon neutrinos to electron neutrinos between a Near and Far Detector over a distance of 735 km. This thesis discusses the development of an analysis framework to search for this oscillation mode. Two major improvements to pre-existing analysis techniques have been implemented by the author. First, a novel particle ID technique based on strip topology, known as the Library Event Matching (LEM) method, is optimized for use in MINOS. Second, a multiple bin likelihood method is developed to fit the data. These two improvements, when combined, increase MINOS' sensitivity to $\sin^2(2\theta_{13})$ by 27\% over previous analyses. This thesis sees a small excess over background in the Far Detector. A Frequentist interpretation of the data rules out $\theta_{13}=0$ at 91\%. A Bayesian interpretation of the data is also presented, placing the most stringent upper boundary on the oscillation parameter to date, at $\sin^2(2\theta_{13})<0.09(0.015)$ for the Normal (Inverted) Hierarchy and $\delta_{CP}=0$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Inverse Compton X-ray emission from the superluminal quasar 3C 345

In quasars with strong radio cores, the inverse-Compton process is believed to be the dominant source X-ray emission. For objects with parsec-scale radio jets, simple models have predicted that components in the jet emerging from the quasar nucleus generate the observed X-ray emission. We have tested this hypothesis in detail for the quasar 3C 345 using a ROSAT X-ray observation in 1990 July, together with quasi-simultaneous very long base interferometry (VLBI) imaging of the parsec-scale jet at five frequencies. The ROSAT spectrum is well fitted by a power law with index alpha = -0.96 +/- -0.13, consistent with models in which the X-ray emission results from inverse-Compton scattering of radio radiation from high-energy electrons in compact components. We show that the radio properties of brightest `knot' in the jet (`C5') can be fitted with a homogeneous sphere model whose parameters require bulk relativistic motion of the emitting material; otherwise the predicted model whose parameters require bulk relativistic motion of the emitting material; otherwise the predicted inverse-Compton X-ray emission exceeds the observed flux. If C5 is the origin of the X-ray emission, then it has a Doppler factor delta = 7.5((sup +3 sub -2)). If the nucleus or other components contribute to the X-ray emission, then this becomes a firm lower limit to delta. The inhomogeneous jet model of Koenigl is a good fit both to the barely resolved (less than 1 pc) flat-spectrum nucleus in the radio, and also to the ROSAT X-ray spectrum. The synchrotron and inverse-Compton emitting fluid moves down a narrow cone (opening angle 2 phi approximately 5 deg) nucleus relativistically, with delta approximately 4.6. Doppler factors for the nucleus and C5, derived from our ROSAT observation, provide evidence for bulk relativistic motion in the jet. By combining these constraints with well-known superluminal motion of jet components, we can deduce geometry. For epoch 1990.5 we infer the Lorentz factor gamma = 7.5 ((sup +1.0 sub -1.5)) and angle to the line of sight theta = 8((sup +2 deg sub -3 deg)) for H(sub 0) = 100 km/s/Mpc. These values are the most reliable yet derived using this method, because of the near-simultaneity of our X-ray and VLBI observations and the quality of the multifrequency of VLBI images and component radio spectra.

Unwin, S. C.↗

Acquisition and processing of data for isotope-ratio-monitoring mass spectrometry

Methods are described for continuous monitoring of signals required for precise analyses of 13C, 18O, and 15N in gas streams containing varying quantities of CO2 and N2. The quantitative resolution (i.e. maximum performance in the absence of random errors) of these methods is adequate for determination of isotope ratios with an uncertainty of one part in 10(5); the precision actually obtained is often better than one part in 10(4). This report describes data-processing operations including definition of beginning and ending points of chromatographic peaks and quantitation of background levels, allowance for effects of chromatographic separation of isotopically substituted species, integration of signals related to specific masses, correction for effects of mass discrimination, recognition of drifts in mass spectrometer performance, and calculation of isotopic delta values. Characteristics of a system allowing off-line revision of parameters used in data reduction are described and an algorithm for identification of background levels in complex chromatograms is outlined. Effects of imperfect chromatographic resolution are demonstrated and discussed and an approach to deconvolution of signals from coeluting substances described.

NASA Discipline Exobiology↗

Summary of the 2008 NASA Fundamental Aeronautics Program Sonic Boom Prediction Workshop

The Supersonics Project of the NASA Fundamental Aeronautics Program organized an internal sonic boom workshop to evaluate near- and mid-field sonic boom prediction capability at the Fundamental Aeronautics Annual Meeting in Atlanta, Georgia on October 8, 2008. Workshop participants computed sonic boom signatures for three non-lifting bodies and two lifting configurations. A cone-cylinder, parabolic, and quartic bodies of revolution comprised the non-lifting cases. The lifting configurations were a simple 69-degree delta wing body and a complete low-boom transport configuration designed during the High Speed Research Project in the 1990s with wing, body, tail, nacelle, and boundary layer diverter components. The AIRPLANE, Cart3D, FUN3D, and USM3D ow solvers were employed with the ANET signature propagation tool, output-based adaptation, and a priori adaptation based on freestream Mach number and angle of attack. Results were presented orally at the workshop. This article documents the workshop, results, and provides context on previously available and recently developed methods.

Park, Michael A.↗

Contaminant source identification using semi-supervised machine learning

Identification of the original groundwater types present in geochemical mixtures observed in an aquifer is a challenging but very important task. Frequently, some of the groundwater types are related to different infiltration and/or contamination sources associated with various geochemical signatures and origins. The characterization of groundwater mixing processes typically requires solving complex inverse models representing groundwater flow and geochemical transport in the aquifer, where the inverse analysis accounts for available site data. Usually, the model is calibrated against the available data characterizing the spatial and temporal distribution of the observed geochemical types. Numerous different geochemical constituents and processes may need to be simulated in these models which further complicates the analyses. In this paper, we propose a new contaminant source identification approach that performs decomposition of the observation mixtures based on Non-negative Matrix Factorization (NMF) method for Blind Source Separation (BSS), coupled with a custom semi-supervised clustering algorithm. Our methodology, called NMFk, is capable of identifying (a) the unknown number of groundwater types and (b) the original geochemical concentration of the contaminant sources from measured geochemical mixtures with unknown mixing ratios without any additional site information. NMFk is tested on synthetic and real-world site data. Finally, the NMFk algorithm works with geochemical data represented in the form of concentrations, ratios (of two constituents; for example, isotope ratios), and delta notations (standard normalized stable isotope ratios).

54 ENVIRONMENTAL SCIENCES↗

Structure of delta-Bi{sub 2}O{sub 3} from density functional theory: A systematic crystallographic analysis

A systematic crystallographic analysis of the <110> and <111> vacancy-ordered structure of cubic delta-Bi{sub 2}O{sub 3} obtained from electronic-structure calculations is presented. The ordering of vacancies leads to a doubling of the unit-cell that results in a 2x2x2 fluorite super-structure, with an associated reduction in its space group symmetry from Fm3-barm to Fm3-bar. The Bi atoms present inside the <111> vacancy-ordered oxygen sublattice have equal Bi-O bond lengths, whereas, those present inside the <110> vacancy-ordered oxygen sublattice have three different pairs of Bi-O bond lengths. The specific ionic displacements and electronic charge configurations also depend on the nature of vacancy ordering in the oxygen sub-lattice. - Graphical abstract: 1/8 of a 2x2x2 delta-Bi{sub 2}O{sub 3} superstructure having Fm3-bar space group. Every oxygen (black) has three possible positions, only one of which is filled either by O1 (red) or O{sub 2} (blue).

36 MATERIALS SCIENCE↗

Characterization of Si volume- and delta-doped InGaAs grown by molecular beam epitaxy

Bulk InGaAs layers were grown at 400 deg. C lattice-matched to InP semi-insulating substrates by molecular beam epitaxy. Si doping of the layers was performed by applying volume- and delta-doping techniques. The samples were characterized by capacitance-voltage, van der Pauw-Hall, secondary ion mass spectroscopy and photoluminescence measurements. Good agreement in terms of dependence of mobility and Burstein-Moss shift shift on doping concentration in samples doped by the two different techniques was obtained. Amphoteric behavior of Si was observed at doping concentrations higher than {approx}2.9x10{sup 19} cm{sup -3} in both delta- and volume-doped samples. Degradation of InGaAs crystalline quality occurred in samples with Si concentrations higher than {approx}4x10{sup 19} cm{sup -3}.

36 MATERIALS SCIENCE↗

Photodissociation of van der Waals clusters of isoprene with oxygen, C{sub 5}H{sub 8}-O{sub 2}, in the wavelength range 213-277 nm

The speed and angular distribution of O atoms arising from the photofragmentation of C{sub 5}H{sub 8}-O{sub 2}, the isoprene-oxygen van der Waals complex, in the wavelength region of 213-277 nm has been studied with the use of a two-color dissociation-probe method and the velocity map imaging technique. Dramatic enhancement in the O atoms photo-generation cross section in comparison with the photodissociation of individual O{sub 2} molecules has been observed. Velocity map images of these 'enhanced' O atoms consisted of five channels, different in their kinetic energy, angular distribution, and wavelength dependence. Three channels are deduced to be due to the one-quantum excitation of the C{sub 5}H{sub 8}-O{sub 2} complex into the perturbed Herzberg III state ({sup 3}{Delta}{sub u}) of O{sub 2}. This excitation results in the prompt dissociation of the complex giving rise to products C{sub 5}H{sub 8}+O+O when the energy of exciting quantum is higher than the complex photodissociation threshold, which is found to be 41740 {+-} 200 cm{sup -1} (239.6{+-}1.2 nm). This last threshold corresponds to the photodissociation giving rise to an unexcited isoprene molecule. The second channel, with threshold shifted to the blue by 1480 {+-} 280 cm{sup -1}, corresponds to dissociation with formation of rovibrationally excited isoprene. A third channel was observed at wavelengths up to 243 nm with excitation below the upper photodissociation threshold. This channel is attributed to dissociation with the formation of a bound O atom C{sub 5}H{sub 8}-O{sub 2}+hv{yields} C{sub 5}H{sub 8}-O{sub 2}({sup 3}{Delta}{sub u}) {yields} C{sub 5}H{sub 8}O + O and/or to dissociation of O{sub 2} with borrowing of the lacking energy from incompletely cooled complex internal degrees of freedom C{sub 5}H{sub 8}{sup *}-O{sub 2}+hv{yields} C{sub 5}H{sub 8}{sup *}-O{sub 2}({sup 3}{Delta}{sub u}) {yields} C{sub 5}H{sub 8}+ O + O. The kinetic energy of the O atoms arising in two other observed channels corresponds to O atoms produced by photodissociation of molecular oxygen in the excited a {sup 1}{Delta}{sub g} and b {sup 1}{Sigma}{sub g}{sup +} singlet states as the precursors. This indicates the formation of singlet oxygen O{sub 2}(a {sup 1}{Delta}{sub g}) and O{sub 2}(b {sup 1}{Sigma}{sub g}{sup +}) after excitation of the C{sub 5}H{sub 8}-O{sub 2} complex. Cooperative excitation of the complex with a simultaneous change of the spin of both partners {sup 1}X-{sup 3}O{sub 2}+h{nu}{yields}{sup 3}X-{sup 1}O{sub 2}{yields}{sup 3}X +{sup 1}O{sub 2} is suggested as a source of singlet oxygen O{sub 2}(a {sup 1}{Delta}{sub g}) and O{sub 2}(b {sup 1}{Sigma}{sub g}{sup +}). This cooperative excitation is in agreement with little or no vibrational excitation of O{sub 2}(a {sup 1}{Delta}{sub g}), produced from the C{sub 5}H{sub 8}-O{sub 2} complex as studied in the current paper as well as from the C{sub 3}H{sub 6}-O{sub 2} and CH{sub 3}I-O{sub 2} complexes reported in our previous paper [Baklanov et al., J. Chem. Phys. 126, 124316 (2007)]. The formation of O{sub 2}(a {sup 1}{Delta}{sub g}) from C{sub 5}H{sub 8}-O{sub 2} was observed at {lambda}{sub pump}= 213-277 nm with the yield going down towards the long wavelength edge of this interval. This spectral profile is interpreted as the red-side wing of the band of a cooperative transition {sup 1}X-{sup 3}O{sub 2}+h{nu}{yields}{sup 3}X(T{sub 2})-{sup 1}O{sub 2}(a {sup 1}{Delta}{sub g}) in the C{sub 5}H{sub 8}-O{sub 2} complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gauge invariant nonlinear electrodynamics motivated by a spontaneous breaking of the Lorentz symmetry

We introduce a new version of nonlinear electrodynamics which is produced by a spontaneous symmetry breaking of Lorentz invariance induced by the nonzero vacuum expectation value of the gauge invariant electromagnetic field strength. The symmetry breaking potential is argued to effectively arise from the integration of massive gauge bosons and fermions in an underlying fundamental theory. All possible choices of the vacuum lead only to the remaining invariant subgroups T(2) and HOM(2). We explore in detail the plane wave solutions of the linearized sector of the model for an arbitrary vacuum. They present two types of dispersion relations. One corresponds to the case of the usual Maxwell electrodynamics with the standard polarization properties of the fields. The other dispersion relation involves anisotropies determined by the structure of the vacuum. The corresponding fields reflect these anisotropies. The model is stable in the small Lorentz invariance violation (LIV) approximation. We have also embedded our model in the photon sector of the standard model extension, in order to translate the many bounds obtained in the latter into corresponding limits for our parameters. The one-way anisotropic speed of light is calculated for a general vacuum, and its isotropic component is strongly bounded by {delta}-tildec/c<2x10{sup -32}. The anisotropic violation contribution is estimated by introducing an alternative definition for the difference of the two-way speed of light in perpendicular directions, {Delta}c, that is relevant to Michelson-Morley type of experiments and which turns out to be also strongly bounded by {Delta}c/c<10{sup -32}. Finally, we speculate on the relation of the vacuum energy of the model with the cosmological constant and propose a connection between the vacuum fields and the intergalactic magnetic fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of the NASA/FLAGRO computer program

A preliminary version of a new computer program has been developed for calculating crack propagation in cyclically loaded structures. The new program, titled NASA/FLAGRO, has numerous enhanced features over previous programs used for safe life analysis on space systems. The essential features of the new program consist of modular design, promptive input using a cathode ray tube terminal, improved crack growth rate analytical methods, many new crack case solutions, and incorporation of user-defined files for material properties and fatigue spectrums. Also, five options made available in the program are to compute: (1) safe life of a part with a preexisting crack; (2) critical crack size for a specified stress level; (3) stress-intensity factor numerical values for making comparisons or checks of solutions; (4) least-squares fit of growth rate equations to crack growth rate data; and (5) the conversion of a versus N data to Delta K versus da/dN.

Forman, Royce G.↗