Search NASA⌕ Search

SEARCH · Search NASA

Results for “depth data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Tropical Ocean Global Atmosphere (TOGA) Meteorological and Oceanographic Data Sets for 1985 and 1986

The Tropical Ocean Global Atmosphere (TOGA) Program is a component of the World Meteorological Organization (WMO)/International Council of Scientific Unions (ICSU) World Climate Research Program (WCRP). One of the objectives of TOGA, which began in 1985, is to determine the limits of predictability of monthly mean sea surface temperature variations in tropical regions. The TOGA program created a raison d'etre for an explosive growth of the tropical ocean observing system and a substantial improvement in numerical simulations from atmospheric and oceanic general circulation models. Institutions located throughout the world are involved in the TOGA-distributed active data archive system. The diverse TOGA data sets for 1985 and 1986, including results from general circulation models, are included on a CD-ROM. Variables on the CD-ROM are barometric pressure, surface air temperature, dewpoint temperature Cartesian components of surface wind, surface sensible and latent heat fluxes,Cartesian components of surface wind stress and of an index of surface wind stress, sea level, sea surface temperature, and depth profiles of temperature and current in the upper ocean. Some data sets are global in extent, some are regional and cover portions of an ocean basin. Data on the CD-ROM can be extracted with an Apple Macintosh or an IBM PC.

Halpern, D.↗
NASA NTRS1994

Implications of high-spatial-resolution thermal infrared (Termoskan) data for Mars landing site selection

Thermal infrared observations of Mars from spacecraft provide physical information about the upper thermal skin depth of the surface, which is on the order of a few centimeters in depth and thus very significant for lander site selection. The Termoskan instrument onboard the Soviet Phobos '88 spacecraft acquired the highest spatial-resolution thermal infrared data obtained for Mars, ranging in resolution from 300 m to 3 km per pixel. It simultaneously obtained broadband reflected solar flux data. Although the 6 deg N - 30 deg S Termoskan coverage only slightly overlaps the nominal Mars Pathfinder target range, the implications of Termoskan data for that overlap region and the extrapolations that can be made to other regions give important clues for optimal landing site selection.

Betts, Bruce H.↗
DOE OSTI2017

Subsurface Temperature, Moisture, Thermal Conductivity and Heat Flux, Area A, B, C, and D, Utqiagvik (Barrow), Alaska, Ongoing from 2012

Subsurface soil monitoring stations are located across each of the four NGEE Arctic, Utqiagvik (Barrow), Alaska, intensive study Areas: (A) low-centered polygons with well-defined troughs, (B) high-centered polygons, (C) flat-centered or transitional polygons, and (D) inundated low-centered polygons with no troughs. Two data products are being generated - both with high temporal (hourly) and spatial resolution (within polygon and with depth): (1) soil profile temperature measurements and (2) active layer and permafrost temperature and moisture measurements from instrumented soil pits. This data package currently contains seventy-nine .csv files, one .xlsx (with complimentary .csv file), and one .pdf. Data from September 2012 through August 2022 are available as annual files. Additional data will be added annually after quality checks have been completed. These data are being collected to better understand the thermal dynamics of the active layer and permafrost. Together this information serves as calibration and evaluation data for fine-scale simulations of polygons. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1990

Voyager disk-integrated photometry of Triton

Hapke's (1981) photometric model has been combined with a plane-parallel thin atmospheric haze model to describe Voyager whole-disk observations of Triton, in the violet, blue, and green wavelength bands, in order to obtain estimates of Triton's geometric albedo, phase integral, and Bond albedo. Phase angle coverage in these filters ranging from about 12 to 159 deg was obtained by combining narrow- and wide-angle camera images. An upturn in the data at the highest phase angles observed can be explained by including scattering in a thin atmospheric haze layer with optical depths systematically decreasing with wavelength from about 0.06 in the violet to 0.03 for the green filter data.

Hillier, J.↗
NASA NTRS1995

Lidar measurements of boundary layers, aerosol scattering and clouds during project FIFE

A detailed account of progress achieved under this grant funding is contained in five journal papers. The titles of these papers are: The calculation of area-averaged vertical profiles of the horizontal wind velocity using volume imaging lidar data; Volume imaging lidar observation of the convective structure surrounding the flight path of an instrumented aircraft; Convective boundary layer mean depths, cloud base altitudes, cloud top altitudes, cloud coverages, and cloud shadows obtained from Volume Imaging Lidar data; An accuracy analysis of the wind profiles calculated from Volume Imaging Lidar data; and Calculation of divergence and vertical motion from volume-imaging lidar data. Copies of these papers form the body of this report.

Eloranta, Edwin W.↗
DOE OSTI2024

Snow Distribution Patterns Revisited: A Physics-Based and Machine Learning Hybrid Approach to Snow Distribution Mapping in the Sub-Arctic

Snowpack distribution in Arctic and alpine landscapes often occurs in repeating, year-to-year patterns due to local topographic, weather, and vegetation characteristics. Previous studies have suggested that with years of observational data, these snow distribution patterns can be statistically integrated into a snow process modeling workflow. Recent advances in snow hydrology and machine learning (ML) have increased our ability to predict snowpack distribution using in-situ observations, remote sensing data sets, and simple landscape characteristics that can be easily obtained for most environments. Here, we propose a hybrid approach to couple a ML snow distribution pattern (MLSDP) map with a physics-based, snow process model. We trained a random forest ML algorithm on tens of thousands of snow survey observations from a subarctic study area on the Seward Peninsula, Alaska, collected during peak snow water equivalent (SWE). We validated hybrid model outputs using in-situ snow depth and SWE observations, as well as a light detection and ranging data set and a distributed temperature profiling sensor data set. When the hybrid results were compared with the physics-based method, the hybrid method more accurately depicted the spatial patterns of the snowpack, areas of drifting snow, and years when no in-situ observations were used in the random forest ML training data set. The hybrid method also showed improvements in root mean squared error at 61% of locations where time-series estimations of snow depth were observed. These results can be applied to any physics-based model to improve the snow distribution patterning to reflect observed conditions in high latitude and high elevation cold region environments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Soil and groundwater environmental sensor data, Wax Lake Delta, Louisiana, March 2023 - March 2024

This study evaluates how environmental parameters that integrate biogeochemical processes vary with water table fluctuations in the freshwater Wax Lake Delta (WLD) in Louisiana, U.S.A. This data package contains seven *.csv files and one Excel file that compiles all the data from the individual .csv files. This dataset reports high frequency (15-min) observations of water level, soil redox potential, specific conductance, and pH made for one year along elevation transects located on the older, proximal (OT) and younger, distal (YT) ends of a deltaic island. Water depth relative to the ground surface (cm; HOBO U20L-04; error ± 0.4 cm), water pH and temperature (HOBO MX2501), and specific conductance and temperature (HOBO U24-001) sensors were installed in March 2023. Water depth was corrected for barometric pressure recorded by a separate logger secured to a platform above the highest water level. Soil redox probes (SWAP ORP-40-4-B) were also installed in March 2023. Each probe had four Pt sensors (2 mm width) placed at 10 cm, 20 cm, 30 cm, and 40 cm below the ground surface. Redox data were referenced to an external Ag0/AgCl (3M KCl) reference probe placed in saturated ground and recorded on CR1000X dataloggers (Campbell Scientific) powered by solar panels. A second reference probe was positioned near the primary reference probe for backup and data correction. The tops of the soil redox probes and soil moisture probes were flush with the soil surface so that sensors are reported at their indicated depths below ground surface. Here, we report data collected between 15 March 2023 to 15 March 2024 for all sensors, with some differences due to exact dates of sensor placement or data gaps associated with sensor malfunction. For example, water depth at OT4 was not recorded between March to November 2023. Data flags indicate whether a value is valid (1) or was excluded from data analysis in the associated manuscript (-1).

EARTH SCIENCE > LAND SURFACE > SOILS↗
NASA NTRS2021

Dare Mighty Things

Winston Churchill once said, “To improve is to change; to be perfect is to change often.” JPL’s Property Accountability objective is to provide superior services related to property accountability, reutilization, and disposition. JPL must report property reutilized and disposed through either sales, donation, or scrap. Implementing the JPL designed and built Property Information Reporting System (PIRS), opened a new perspective with our data and what are we reporting to NASA. With this new depth of visibility, we self-implemented as assessment to validate the fiduciary and stewardship responsibilities of what is being reporting to NASA. JPL strives to perform at a level beyond the basic primary expectations of our NASA requirements. JPL developed the PIRS - which rolled out in 2018 - to simplify the delivery of JPL’s Personal Property and Equipment (PP&E) reporting: PIRS takes the raw data from Oracle to generate the NASA Form (NF) 1018 and Contractor Held Asset Reporting System (CHATS) Reports, and to meet the requirements established for AS9100 compliance. The data presented from PIRS is exportable and used to analyze our property records. JPL is also embarking on an effort to define the JPL of the future with “Enterprise 2.0”. Enterprise 2.0 is the driving force of JPL’s strategy to digitally transform the Laboratory from the current legacy processes and systems to a modern, integrated, information-driven highway of business transactions. This should include automation of routine processes and data-related tasks, integration of data and systems, advanced search and analytics, and improved information sharing and collaboration. As JPL’s evolving landscape of digital technologies advance to meet the future, JPL Property Accountability is making strides to surpass these expectations. For every cause there is an effect: a revealing of something that aids in the further development and transformation of JPL best business practices.

Sucher, Jay M↗
NASA NTRS2000

Non-Tidal Non-Seasonal Oceanic Mass Redistribution Estimated from the TOPEX/Poseidon Observation

Topex/Poseidon altimetry data are used to estimate the non-tidal mass redistribution as a function of space-time. The goal is to study the contribution of ocean circulations in the geodynamic effects including Earth's rotational and gravitational variations. We examine the non-seasonal anomalies at monthly sampling rate over the T/P span of eight years, concentrating especially on interannual variabilities. Since the sea-surface height data obtained from altimetry is the combined effect of steric change (primarily thermal effect) and the mass flux, and because the former has zero contribution to the geodynamic effects, one needs to do a so-called steric correction by removing from the altimetry data the steric contributions. We achieve it using multiyear monthly sea-surface temperature maps, together with monthly "climatology" for mixed-layer depth maps for mean-months of the year. We analyze both sets of the altimetry data and the steric correction data using the empirical orthogonal function/principal component analysis (in which we take care of issues associated with the area-weighting and non-zero mean), and examine the most important modes, either globally or regionally. In particular, the ENSO in the tropical Pacific/Indian Oceans exhibits the most prominent pattern. The net mass transport after the steric correction can then be compared with: (1) ocean general circulation model outputs for the same period of time (such as from POCM-4B); (2) non-atmospheric Earth rotation variations obtained from space geodesy data and atmospheric angular momentum data; (3) non-atmospheric low-degree gravitational variations from satellite-laser-ranging observations and global atmospheric data.

Chao, Benjamin F.↗
DOE OSTI2017

Final Scientific/Technical Report of Gas Hydrate Dynamics on the Alaskan Beaufort Continental Slope: Modeling and Field Characterization

Methane Hydrates, a solid form of methane and water, exist at high pressures and low temperatures, occurs on every continental margin on Earth, represents one of the largest reservoirs of carbon on the planet, and, if destabilized, may play an important role in both slope stability and climate change. For decades, researchers have studied methane hydrates with the hope of determining if methane hydrates are destabilizing, and if so, how this destabilization might impact slope stability and ocean/atmosphere carbon budgets. In the past ~5 years, it has become well established that the upper “feather-edge” of methane hydrate stability (intermediate water depths of ~200-500 meters below sea level) represents an important frontier for methane hydrates stability research, as this zone is most susceptible to destabilization due to minor fluctuations in ocean temperature in space and time. The Arctic Ocean—one of the fastest warming regions on Earth—is perhaps the best place to study possible changes to methane hydrate stability due to ocean warming. To address the stability of methane hydrates at intermediate ocean depths, Southern Methodist University in partnership with Oregon State University and The United State Geological Survey at Woods Hole began investigating methane hydrate stability in intermediate water depths below both the US Beaufort Sea and the Atlantic Margin, from 2012-2017. The work was funded by the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL). The key goal of the SMU component of this study was to collect the first ever heat flow data in the Beaufort Sea and compare measured shallow (probe-based1) heat flow values with deeper (BSR-derived2) heat flow values, and from this, determine whether hydrates were in thermal equilibrium. In September 2016, SMU/OSU collected the first ever heat flow measurements in the US Beaufort Sea. Despite poor weather and rough seas, the cruise was a success, with 116 heat flow measurements acquired across the margin, spanning 4 transects separated by more than 400 km. Useable heat flow data exists for 97% (113) of probe heat flow measurements, revealing a clear picture of regional heat flow across the basin. During the past 8 months since the cruise, SMU researchers have processed the heat flow and thermal conductivity measurements and compared results to deeper heat flow estimates obtained from seismic data. The analysis reveals clear, consistent trends: All probe heat flow measurements in depths greater than 800 mbsl are consistent with BSR-derived values; heat flow measurements obtained in water depths between ~250-750 mbsl are systematically lower than those estimated from BSRs; and heat flow estimates in water depths shallower than ~250 mbsl are systematically warmer than deeper estimates. The consistency between shallow (probe) and deep (BSR) heat flow measurements at depths greater than ~750 m where ocean temperature changes are minimal supports the premise that the hydrates consist primarily of methane and represent a valuable tool for estimating heat flow. The anomalous cooling trend observed in the upper 250 m is consistent with expected seasonal effects observed in shallow ocean buoy measurements in the arctic, when cold, less dense melting sea ice cools the upper 200 m of the ocean during the summer as ice melting occurs. The discrepancy in heat flow at intermediate water depths is best explained via recent intermediate ocean temperature warming, where long-term (annual or longer) warming intermediate ocean bottom waters result in an anomalously low heat flow in shallow heat flow measurements. Using the characteristic 1D time-length scale for diffusion, we estimate that ocean temperature warming began no later than ~1200 years ago but arguably much more recently as results are limited by seismic resolution. More importantly, our analysis indicates methane hydrate is destabilizing not only in the upper feather edge (200-500 mbsl) but at depths as great as 750 mbsl. The intermediate ocean warming rate supports previous studies suggesting geologically rapid warming (>0.1 deg C/decade) at intermediate ocean depths in the Beaufort Sea. Assuming no further changes or additional warming, our analysis indicates methane hydrates will destabilize at seafloor depths shallower than 750 mbsl in the Beaufort Sea within the next ~3000 years. 1 Probe outfitted with sensors inserted into the seafloor sediment 2 Bottom-simulating reflector (BSR) seismic data indicates presence of hydrate deposits

58 GEOSCIENCES↗
NASA NTRS1973

Photometric and polarimetric mapping of water turbidity and water depth

A Digital Photometric Mapper (DPM) was used in the Fall of 1971 in an airborne survey of New York and Boston area waters to acquire photometric, spectral and polarimetric data. The object of this study is to analyze these data with quantitative computer processing techniques to assess the potential of the DPM in the measurement and regional mapping of water turbidity and depth. These techniques have been developed and an operational potential has been demonstrated. More emphasis is placed at this time on the methodology of data acquisition, analysis and display than on the quantity of data. The results illustrate the type, quantity and format of information that could be generated operationally with the DPM-type sensor characterized by high photometric stability and fast, accurate digital output. The prototype, single-channel DPM is suggested as a unique research tool for a number of new applications. For the operational mapping of water turbidity and depth, the merits of a multichannel DPM coupled with a laser system are stressed.

Halajian, J.↗
NASA NTRS1980

Snowpack monitoring in North America and Eurasia using passive microwave satellite data

Areas of the Canadian high plains, the Montana and North Dakota high plains, and the steppes of central Russia have been studied in an effort to determine the utility of spaceborne microwave radiometers for monitoring snow depths in different geographic areas. Significant regression relationships between snow depth and microwave brightness temperatures were developed for each of these homogeneous areas. In each of the study areas investigated in this paper, Nimbus-6 (0.81 cm) ESMR data produced higher correlations than Nimbus-5 (1.55 cm) ESMR data in relating microwave brightness temperature to snow depth. It is difficult to extrapolate relationships between microwave brightness temperature and snow depth from one area to another because different geographic areas are likely to have different snowpack conditions.

Foster, J. L.↗
NASA NTRS2010

What We are Learning from (and About) the 10 Plus Year MISR Aerosol Data Record

Having a 10+ year data record from the Multi-angle Imaging SpectroRadiometer (MISR) significantly improves our opportunities to validate the retrieved aerosol optical depth (AOD) and especially particle microphysical property products. It also begins to raise the possibility of using the data to look for changes or even trends, at least on a regional basis. Further, we have had the opportunity to expand the database of wildfire smoke plume heights derived from the multiangle observations. This presentation will review the latest aerosol validation results and algorithm upgrades under consideration by the MISR team, and will summarize the current status of MISR global aerosol air mass type, and regional dust transport and smoke injection height products. The strengths and limitations of these data for constraining aerosol transport model simulations will receive special emphasis.

Kahn, Ralph A.↗
NASA NTRS2017

Fluid Lensing and Applications to Remote Sensing of Aquatic Environments

The use of fluid lensing technology on UAVs is presented as a novel means for 3D imaging of aquatic ecosystems from above the water's surface at the centimeter scale. Preliminary results are presented from airborne fluid lensing campaigns conducted over the coral reefs of Ofu Island, American Samoa (2013) and the stromatolite reefs of Shark Bay, Western Australia (2014), covering a combined area of 15km2. These reef ecosystems were revealed with centimetre-scale 2D resolution, and an accompanying 3D bathymetry model was derived using fluid lensing, Structure from Motion and UAV position data. Data products were validated from in-situ survey methods including underwater calibration targets, depth measurements and millimetre-scale high-dynamic range gigapixel photogrammetry. Fluid lensing is an experimental technology that uses water transmitting wavelengths to passively image underwater objects at high-resolution by exploiting time-varying optical lensing events caused by surface waves. Fluid lensing data are captured from low-altitude, cost-effective electric UAVs to achieve multispectral imagery and bathymetry models at the centimetre scale over regional areas. As a passive system, fluid lensing is presently limited by signal-to-noise ratio and water column inherent optical properties to approximately 10 m depth over visible wavelengths in clear waters. The datasets derived from fluid lensing present the first centimetre-scale images of a reef acquired from above the ocean surface, without wave distortion. The 3D multispectral data distinguish coral, fish and invertebrates in American Samoa, and reveal previously undocumented, morphologically distinct, stromatolite structures in Shark Bay. These findings suggest fluid lensing and multirotor electric drones represent a promising advance in the remote sensing of aquatic environments at the centimetre scale, or 'reef scale' relevant to the conservation of reef ecosystems. Pending further development and validation of fluid lensing methods, these technologies present a solution for large-scale 3D surveys of shallow aquatic habitats with centimetre-scale spatial resolution and hourly temporal sampling.

Aquatic↗
NASA NTRS2015

Mars2020 Entry, Descent, and Landing Instrumentation (MEDLI2): Science Objectives and Instrument Requirements

NASAs exploration and technology roadmaps call for capability advancements in Mars entry, descent, and landing (EDL) systems to enable increased landed mass, a higher landing precision, and a wider planetary access. It is also recognized that these ambitious EDL performance goals must be met while maintaining a low mission risk in order to pave the way for future human missions. As NASA is engaged in developing new EDL systems and technologies via testing at Earth, instrumentation of existing Mars missions is providing valuable engineering data for performance improvement, risk reduction, and an improved definition of entry loads and environment. The most notable recent example is the Mars Entry, Descent and Landing Instrument (MEDLI) suite hosted by Mars Science Laboratory for its entry in Aug 2012. The MEDLI suite provided a comprehensive dataset for Mars entry aerodynamics, aerothermodynamics and thermal protection system (TPS) performance. MEDLI data has since been used for unprecedented reconstruction of aerodynamic drag, vehicle attitude, in-situ atmospheric density, aerothermal heating, and transition to turbulence, in-depth TPS performance and TPS ablation. [1,2] In addition to validating predictive models, MEDLI data has demonstrated extra margin available in the MSL forebody TPS, which can potentially be used to reduce vehicle parasitic mass. The presentation will introduce a follow-on MEDLI instrumentation suite (called MEDLI2) that is being developed for Mars-2020 mission. MEDLI2 has an enhanced scope that includes backshell instrumentation, a wider forebody coverage, and instruments that specifically target supersonic aerodynamics. Similar to MEDLI, MEDLI2 uses thermal plugs with embedded thermocouples and ports through the TPS to measure surface pressure. MEDLI2, however, also includes heat flux sensors in the backshell and a low range pressure transducer to measure afterbody pressure.

Aerothermodynamics↗
NASA NTRS1990

New computational control techniques and increased understanding for stereo 3-D displays

While conventional asymptotic transformations for mapping a visual scene onto a stereo viewing volume allow a single, specific scene-distance to be fixed at the screen location, the present piecewise linear approach allows creative partitioning of the depth viewing volume and affords the freedom to place depth-cueing emphasis wherever desired. Attention is given to the results of an experiment with the novel system which attempted to ascertain the effective region of stereopsis cueing. A practical viewing volume falls between -25 and +60 percent of the viewer-to-screen distance. The data indicate that increased viewer-to-CRT distances furnish increasing usable depth.

Williams, Steven P.↗
NASA NTRS2018

Experimental Effervescence and Freezing Point Depression Measurements of Nitrogen in Liquid Methane-Ethane Mixtures

NASA is designing an unmanned submarine to explore the depths of the hydrocarbon-rich seas on Saturn's moon Titan. Data from Cassini indicates that the Titan north polar environment sustains stable seas of variable concentrations of ethane, methane, and nitrogen, with a surface temperature near 93 K. The submarine must operate autonomously, study atmosphere/sea exchange, interact with the seabed, hover at the surface or any depth within the sea, and be capable of tolerating variable hydrocarbon compositions. Currently, the main thermal design concern is the effect of effervescence on submarine operation, which affects the ballast system, science instruments, and propellers. Twelve effervescence measurements on various liquid methane-ethane compositions with dissolved gaseous nitrogen are thus presented from 1.5 bar to 4.5 bar at temperatures from 92 K to 96 K to simulate the conditions of the seas. After conducting effervescence measurements, two freezing point depression measurements were conducted. The freezing liquid line was depressed more than 15 K below the triple point temperatures of pure ethane (90.4 K) and pure methane (90.7 K). Experimental effervescence measurements will be used to compare directly with effervescence modeling to determine if changes are required in the design of the thermal management system as well as the propellers.

Submarine↗
NASA NTRS1991

Stratospheric aerosol optical depth observed by the Stratospheric Aerosol and Gas Experiment. II - Decay of the El Chichon and Ruiz volcanic perturbations

The decay of the El Chichon perturbation to the optical depth of stratospheric aerosols at 1.02 micron, 0.525 micron, and 0.453 micron is calculated from the Stratospheric Aerosol and Gas Experiment II (SAGE II) data set for the period December 1984 to December 1988. It is found that the perturbed optical depths at middle and higher latitudes of both hemispheres exhibited an exponential decay superimposed by a seasonal oscillation with a maximum and a minimum occurring in local winter and local summer, respectively. Microphysical processes and variation of the tropopause height alone cannot explain this seasonal change of optical depth. The magnitudes of the exponential component at higher latitudes were, in general, larger than those at lower latitudes. For optical depths in tropical regions, the seasonal oscillations were small and were disturbed by the eruption of Nevado del Ruiz on November 13, 1985. The increase in the ratio of optical depth at 0.525 micron to that at 1.02 micron from about 2.0 at the beginning of 1985 to about 3.5 at the end of 1988 indicates the average size of aerosol particles in the stratosphere is diminishing since the eruption of El Chichon. The 1/e folding time for El Chichon decay derived from the SAGE II data set is in reasonably good agreement with those derived by other methods.

Yue, G. K.↗