Search NASA⌕ Search

SEARCH · Search NASA

Results for “multifunctionality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

NiMo-ceria-zirconia-based anode for solid oxide fuel cells operating on gasoline surrogate

A multi-functional NiMo-ceria-zirconia composite was developed as an anode for a solid oxide fuel cell (SOFC) running on isooctane that is a commonly used model fuel for gasoline. The anode layer was fabricated on an electrolyte-supported single cell using yttria-stabilized zirconia (YSZ) as the electrolyte and La0.6Sr0.4Co0.2Fe0.8O3-d as the cathode. Our results indicated that the single NiMo-ceria-zirconia layer possessed a dual-functionality: the first function was to internally convert complex hydrocarbons into a synthesis gas and the second function was to electrochemically oxidize the synthesis gas mixture for electric power generation. The addition of Mo to the Ni-ceria-zirconia allowed direct conversion of isooctane in SOFC. It significantly suppressed carbon deposition in the anode and improved the lifetime of a single cell. Additionally, the presence of Mo in the Ni-ceria-zirconia anode appeared to facilitate a higher degree of sintering, which increased the electrical conductivity and maximum power density of the single cell. When operating on isooctane at 800 °C, single cell with the 5 wt.% Mo in the Ni-ceria-zirconia-based anode displayed a maximum power density of 212 mW cm-2 at 0.48V which was higher than that of a single cell with the Ni-YSZ-based anode without the Mo promoter (49 mW cm-2 at 0.48 V).

NiMo-Ceria-Zirconia composite, Single layer multif↗

Coal-derived conductive pavement for winter de-icing: prototype, modeling, and simulation

Existing pavement de-icing methods result in high installation and maintenance costs, traffic delays, excessive weariness and corrosion, and negative environmental and safety impacts. To overcome these challenges, this paper presents an innovative pathway to designing and constructing smart self-heating pavements using a low-cost coal-char bearing asphalt material. The conductive asphalt incorporates coal char, i.e., a key byproduct of the coal pyrolysis process, into the Stone Mastic Asphalt (SMA) mixture. This asphalt containing coal-derived solid carbon exhibits highly tailorable electrical conductivity, satisfactory mechanical and thermophysical properties, and superior cost-efficiency as compared to other conductive pavement materials. The de-icing performance was also demonstrated by laboratory experiments on a bench-scale prototype. Furthermore, an efficient thermal network model was developed and validated by experiments to investigate the transient thermal behavior and energy performance of the Ohmic heating pavement system. Furthermore, the whole-year energy simulation case studies were conducted on a bridge pavement with an annual energy use of 24.6–1444.8 kWh/m 2 , showcasing its potential in field applications across cool humid, cold humid, and subarctic/arctic climate zones.

42 ENGINEERING↗

Encapsulation of superparamagnetic Fe 3 O 4 @SiO 2 core/shell nanoparticles in MnO 2 microflowers with high surface areas

Microflowers made of interconnected MnO2 nanosheets have been successfully synthesized in a microwave reactor through a hydrothermal reduction of KMnO4 with aqueous HCl at elevated temperatures in the presence of superparamagnetic Fe3O4@SiO2 core-shell nanoparticles. Due to the chemical compatibility between SiO2 and MnO2, the heterogeneous reaction leads to the spontaneous encapsulation of the Fe3O4@SiO2 core-shell nanoparticles in the MnO2 microflowers. The resulting hybrid particles exhibit multiple properties including high surface area associated with the MnO2 nanosheets and superparamagnetism originated from the Fe3O4@SiO2 core-shell nanoparticles, which are beneficial for applications requiring both high surface area and magnetic separation. (C) 2014 Yu-Gang Sun.

36 MATERIALS SCIENCE↗

Factors affecting direct lightning strike damage to fiber reinforced composites: A review

In recent years, Carbon Fiber Reinforced Plastics (CFRP) or Glass Fiber Reinforced Plastics (GFRPs) have become a very common material for aircraft and wind turbine structures. These structures are often protected from lightning strikes using conventional metal-based protective films/foils. Non-conventional, non-metallic lightning strike protection (LSP) technologies have not yet been fully realized, but research on non-conventional LSP systems for CFRPs has gained momentum in the last few years. The discovery of new structural conductive materials and improvements in the processing of carbon nano-filler based composites have challenged the conventional metal-based LSP systems by providing the potential for lightweight, non-metallic alternatives. However, a major challenge in using non-conventional LSP is the complex nature of a lightning strike event and its complicated thermal and mechanical impact on CFRP structures. Understanding the direct effect of a lightning strike on a CFRP structure requires understanding multiple transient loads, such as electrical, thermal, magnetic, acoustics, shock, and inertia. This review article focuses on new findings and discusses the complex direct effects of lightning on CFRPs. Specifically, the focus is to find the important factors that regulate and control the damage to FRPs are classified and discussed with the help of available literature based on experimental results. Finally, possibilities and limitations to these new findings are discussed.

36 MATERIALS SCIENCE↗

Polyaniline-based all-polymeric adhesive layer: An effective lightning strike protection technology for high residual mechanical strength of CFRPs

Carbon fiber reinforced plastics (CFRPs) are vulnerable to lightning strikes due to their low electrical conductivity and low heat resistance. A lightning strike can damage CFRP structure catastrophically. Most common lightning strike protection (LSP) technology, consists of expanded metal foils/films on top of composite structures. This technology possesses disadvantages such as increased weight, galvanic corrosion, expensive integration and repair costs. In the present study, authors introduce a novel, easy to apply and all-polymeric LSP material. A doped intrinsic conductive polymer i.e. Polyaniline (PANI) dispersed in a thermosetting cross-linking polymer divinylbenzene (DVB) has been used to prepare an adhesive layer of 0.25–0.4 mm thickness. CFRP structure coated with PANI-based LSP layer, when tested against simulated lightning impulse current of 100 kA, demonstrated effective dissipation of the current, rendering almost 100% safety to the CFRP structure. PANI showed the capability to create a 3-D conductive network due to its self-assembling property, which makes it superior compared to its counterpart carbon/metal nano-filler based LSP technologies. Almost 100% residual strength of PANI-LSP protected CFRPs is reported in this work.

42 ENGINEERING↗

Enhancing functionalities in carbon fiber composites by titanium dioxide nanoparticles

Carbon fiber composite's high specific strength makes it incredibly useful for structural applications. However, their low strain-to-failure can be problematic in structural applications that can potentially see high strain conditions or high fatigue cycles resulting in sudden, catastrophic failure. This is further complicated by damage manifesting within the composite thus not showing damage indicators on the surface. Therefore, monitoring the structural integrity and strain history of the composite in application by itself—while maintaining positive composite performance—is vital to ensure safe operation. In this study, a homogeneous dispersion of TiO 2 nanoparticles on carbon fiber is demonstrated to generate a piezoresistive carbon fiber polymer matrix composite with enhanced self-sensing capabilities. The nanoparticle-embedded composites also exhibited superior strength and damping potential compared to the nanoparticle-free composites. The apparent interlaminar shear strength increased by up to 15% and the damping loss factor increased by an average of 150% while the piezoresistive sensitivity increased by up to 180% with the addition of a small weight fraction of nanoparticles to the fiber surface. These results demonstrate an approach to simultaneously improve the sensing capabilities, damping behavior and mechanical strength of carbon fiber composites by simply adding nanoparticles in the fiber sizing using a commercially scalable deposition method.

36 MATERIALS SCIENCE↗

New insights into the low-temperature oxidation of 2-methylhexane

The low-temperature oxidation of a stoichiometric 2-methylhexane/O 2 /Ar mixture was examined in a jet-stirred reactor coupled with synchrotron vacuum UV photoionization molecular-beam MS. The initial gas mixture was composed of 2% 2-methyhexane, 22% O 2 and 76% Ar and the pressure of the reactor was kept at 780 Torr. Low-temperature oxidation intermediates with two to five oxygen atoms were observed. The detection of C 7 H 14 O 5 and C 7 H 12 O 4 species suggests that a third O 2 addition process occurs in 2-methylhexane low-temperature oxidation. A detailed kinetic model was developed that describes the third O 2 addition and subsequent reactions leading to C 7 H 14 O 5 (keto-dihydroperoxide and dihydroperoxy cyclic ether) and C 7 H 12 O 4 (diketo-hydroperoxide and keto-hydroperoxy cyclic ether) species. The kinetics of the third O 2 addition reactions are discussed and model calculations were performed that reveal that third O 2 addition reactions promote 2-methylhexane auto-ignition at low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hygroscopicity of organic compounds as a function of carbon chain length, carboxyl, hydroperoxy, and carbonyl functional groups

The albedo and microphysical properties of clouds are controlled in part by the hygroscopicity of particles serving as cloud condensation nuclei (CCN). Hygroscopicity of complex organic mixtures in the atmosphere varies widely and remains challenging to predict. Here we present new measurements characterizing the CCN activity of pure compounds in which carbon chain length and the number of hydroperoxy, carboxyl, and carbonyl functional groups were systematically varied to establish the contributions of these groups to organic aerosol apparent hygroscopicity. Apparent hygroscopicity decreased with carbon chain length and increased with polar functional groups in the order carboxyl > hydroperoxy > carbonyl. Activation diameters at different supersaturations deviated from the -3/2 slope in log-log space predicted by Köhler theory, suggesting that water solubility limits CCN activity of particles composed of weakly functionalized organic compounds. Results are compared to a functional group contribution model that predicts CCN activity of organic compounds. The model performed well for most compounds but under-predicted the CCN activity of hydroperoxy groups. New best-fit hydroperoxy group/water interaction parameters were derived from the available CCN data. Lastly, these results may help improve estimates of the CCN activity of ambient organic aerosols from composition data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoporous Gold as a Neural Interface Coating: Effects of Topography, Surface Chemistry, and Feature Size

We report that designing neural interfaces that maintain close physical coupling of neurons to an electrode surface remains a major challenge for both implantable and in vitro neural recording electrode arrays. Typically, low-impedance nanostructured electrode coatings rely on chemical cues from pharmaceuticals or surface-immobilized peptides to suppress glial scar tissue formation over the electrode surface (astrogliosis), which is an obstacle to reliable neuron–electrode coupling. Nanoporous gold (np-Au), produced by an alloy corrosion process, is a promising candidate to reduce astrogliosis solely through topography by taking advantage of its tunable length scale. In the present in vitro study on np-Au’s interaction with cortical neuron–glia co-cultures, we demonstrate that the nanostructure of np-Au achieves close physical coupling of neurons by maintaining a high neuron-to-astrocyte surface coverage ratio. Atomic layer deposition-based surface modification was employed to decouple the effect of morphology from surface chemistry. Additionally, length scale effects were systematically studied by controlling the characteristic feature size of np-Au through variations in the dealloying conditions. In conclusion, our results show that np-Au nanotopography, not surface chemistry, reduces astrocyte surface coverage while maintaining high neuronal coverage and may enhance neuron–electrode coupling through nanostructure-mediated suppression of scar tissue formation.

36 MATERIALS SCIENCE↗

Oxygen vacancy-driven evolution of structural and electrical properties in SrFeO 3₋δ thin films and a method of stabilization

Epitaxial SrFeO 3-δ (SFO) thin films have been grown on various substrates by pulsed laser deposition. The structural and electrical properties of SFO thin films are monitored with time in different atmospheres at room temperature, showing time-dependent crystal structure and electrical conductivity. The increased out-of-plane lattice parameter and resistivity over time are associated with the increased oxygen vacancies density in SFO thin films. The epitaxial strain plays an important role in determining the initial resistivity, and the sample environment determines the trend of resistivity change over time. An amorphous Al 2 O 3 passivation layer has been found to be effective in stabilizing the structure and electrical properties of SFO thin films. Lastly, this work explores time dependent structure and properties variation in oxide films and provides a way to stabilize thin film materials that are sensitive to oxygen vacancies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gadolinium vanadate nanocrystals as carriers of α-emitters ( 225 Ac, 227 Th) and contrast agents

Gadolinium vanadate (GdVO 4 ) core and core +2 shell nanocrystals (NCs) were evaluated for in vitro retention of 225 Ac, 227 Th, and their first decay daughters, 221 Fr and 223 Ra, respectively. GdVO 4 NCs with a tetragonal crystal system (zircon-type) and spherical morphology were obtained by precipitation of GdCl 3 and Na 3 VO 4 using sodium citrate as a complexing agent. The growth of two nonradioactive GdVO 4 shells on both Gd( 225 Ac)VO 4 and Gd( 227 Th)VO 4 core NCs was demonstrated by an increase of 0.7 nm and 2 nm in the crystallite size, respectively. The maximum leakage of 225 Ac was 15% and 2.4% from core and core + 2 shells, whereas the leakage of 227 Th was 3% and 1.5%, respectively. The presence of two nonradioactive GdVO 4 shells increased the retention of 221 Fr and 223 Ra by 20% and 15% with respect to core NCs. Furthermore, a longitudinal proton relaxivity, r 1 = 0.9289 s –1 mM –1 , confirmed their potential application as contrast agents for magnetic resonance imaging. In summary, GdVO 4 NCs show promising capabilities as radionuclide carriers with partial retention of decay daughters and as contrast agents for theranostic applications.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Interactions with the Bifunctional Interface of the Transcriptional Coactivator DCoH1 Are Kinetically Regulated

Pterin-4a-carbinolamine dehydratase (PCD) is a highly conserved enzyme that evolved a second, unrelated function in mammals, as a transcriptional coactivator. As a coactivator, PCD is known as DCoH or dimerization cofactor of the transcription factor HNF-1. These two activities are associated with a change in oligomeric state: from two dimers interacting as an enzyme in the cytoplasm to a dimer interacting with a dimer of HNF-1 in the nucleus. The same interface of DCoH forms both complexes. To determine how DCoH partitions between its two functions, we studied in this paper the folding and stability of the DCoH homotetramer. We show that the DCoH1 homotetramer is kinetically trapped, meaning once it forms it will not dissociate to interact with HNF-1. In contrast, DCoH2, a paralog of DCoH1, unfolds within hours. A simple mutation in the interface of DCoH2 from Ser-51 to Thr, as found in DCoH1, increases the kinetic stability by 9 orders of magnitude, to τ½ ~2 million years. This suggests that the DCoH1·HNF-1 complex must co-fold to interact. We conclude that simple mutations can dramatically affect the dissociation kinetics of a complex. Residue 51 represents a “kinetic hot spot” instead of a “thermodynamic hot spot.” Kinetic regulation allows PCD to adopt two distinct functions. Finally, mutations in DCoH1 associated with diabetes affect both functions of DCoH1, perhaps by disrupting the balance between the two DCoH complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tunable surface acoustic wave device using semiconducting MgZnO and piezoelectric NiZnO dual-layer structure on glass

Tunable surface acoustic wave (SAW) devices have attracted considerable interests due to its applications in emerging fields, such as secured wireless communication, adaptive signal processing, and smart sensing systems. We report a dual-input-voltage-controlled tunable SAW built on glass, which uses a ZnO-based dual-layer structure consisting of a piezoelectric Ni- doped ZnO (NZO) and semiconducting Mg-doped ZnO (MZO). The interdigital (IDT) electrodes are buried in the piezoelectric NZO layer to form the delay line for SAW propagation, while the semiconductor MZO layer serves as the channel of a thin film transistor (TFT) to modulate the conductivity. Results show the interface between MZO channel and SiO 2 gate dielectric layer of the TFTT significantly impacts on SAW tuning performances due to Zn diffusion from MZO into SiO 2 . The TFT-SAW device using an ultra-thin MgO layer as interface modification enables SAW frequency tuning of 0.53% under solely V gs control with 0–12 V. The required voltage range is significantly reduced compared regular MZO-NZO TFT-SAW counterpart (Δf/f c ~ 0.25%; V gs –30 to –14 V) without interface modification. With additional control of V ds , the SAW frequency tunability is further expanded from 0.46% to 0.63%. As a result, this dual-input voltage-controlled frequency tuning device on glass is promising for low-voltage, low-cost portable smart sensors and voltage-controlled reconfigurable radio-frequency identification tags.

36 MATERIALS SCIENCE↗