Search NASA⌕ Search

SEARCH · Search NASA

Results for “observable behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Boric acid flux synthesis, structure and magnetic property of MB₁₂O₁₄(OH)₁₀ (M=Mn, Fe, Zn)

Three new borates MB₁₂O₁₄(OH)₁₀ (M=Mn, Fe, Zn) have been synthesized by boric acid flux methods, which are isotypic to NiB₁₂O₁₄(OH)₁₀. Single-crystal XRD was performed to determine the crystal structures in detail. They all crystallize in the monoclinic space group P2₁/c. The size of MO{sub 6} (M=Mg, Mn, Fe, Co, Ni, Zn) octahedron shows a good agreement with the Shannon effective ionic radii of M²⁺. Magnetic measurements indicate MnB₁₂O₁₄(OH)₁₀ is antiferromagnetic without a long-range ordering down to 2 K. The values of its magnetic superexchange constants were evaluated by DFT calculations, which explain the observed magnetic behavior. The UV–vis diffuse reflectance spectrum of ZnB₁₂O₁₄(OH)₁₀ suggests a band gap ~4.6 eV. DFT calculations indicate it has a direct band gap 4.9 eV. The optical band gap is contributed by charge transfers from the occupied O 2p to the unoccupied Zn 4s states. - Graphical abstract: Experimental and theoretical studies indicate MnB₁₂O₁₄(OH)₁₀ is antiferromagnetic without a long-range ordering. DFT calculations show ZnB₁₂O₁₄(OH)₁₀ has a direct band gap of 4.9 eV. Highlights: • MB₁₂O₁₄(OH)₁₀ (M=Mn, Fe, Zn) are synthesized by two-step boric acid flux method. • Single-crystal XRD was performed to determine the crystal structures in detail. • Size of MO₆ (M=Mg, Mn, Fe, Co, Ni, Zn) agrees with the effective ionic radii. • MnB₁₂O₁₄(OH)₁₀ is antiferromagnetic without a long-range ordering down to 2 K. • DFT calculations indicate ZnB₁₂O₁₄(OH)₁₀ has a direct band gap 4.9 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure and electrical properties of A-site cation ordered BaErMn{sub 2}O{sub 5} and BaErMn{sub 2}O{sub 6}

In this paper, we report on a synthesis procedure, structural and electrical properties of BaErMn{sub 2}O{sub 5} and BaErMn{sub 2}O{sub 6}, A-site double perovskites having layered arrangement of Ba and Er cations. These materials belong to a family of BaLnMn{sub 2}O{sub 5+δ} oxides, which up to now were successfully synthesized for Ln=Y and La–Ho lanthanides. Up to our knowledge, this is the first report on the successful synthesis of BaErMn{sub 2}O{sub 5} and BaErMn{sub 2}O{sub 6}, yielding>95 wt% of the considered compounds. Structural characterization of the materials is given at room temperature, together with in situ XRD studies, performed during oxidation of BaErMn{sub 2}O{sub 5} in air, at elevated temperatures up to 500 °C. A complex structural behavior was observed, with oxidation process of BaErMn{sub 2}O{sub 5} occurring at around 300 °C. The oxidized BaErMn{sub 2}O{sub 6} shows a structural phase transition at about 225 °C. Results of structural studies are supported by thermogravimetric measurements of the oxidation process, performed in air, as well as reduction process, preformed in 5 vol% of H{sub 2} in Ar. Additionally, isothermal oxidation/reduction cycles were measured at 500 °C, showing interesting properties of BaErMn{sub 2}O{sub 5+δ}, from a point of view of oxygen storage technology. Electrical conductivity of BaErMn{sub 2}O{sub 5} is of the order of 10{sup −4} S cm{sup −1} at room temperature and shows activated character on temperature with activation energy E{sub a}=0.30(1) eV. Positive sign of Seebeck coefficient for this material indicates holes as dominant charge carriers. Oxidized BaErMn{sub 2}O{sub 6} possesses much higher electrical conductivity, almost 0.2 S cm{sup −1} at room temperature. Additional, about 10-fold increase of electrical conductivity, occurring in the vicinity of 225 °C for this material, can be associated with phase transition from charge/orbital-ordered insulator COI(CE) to paramagnetic metal PM phase. The highest conductivity for BaErMn{sub 2}O{sub 6} was measured near 500 °C and is almost equal to 40 S cm{sup −1}, while negative sign of Seebeck coefficient can be associated with electrons being dominant charge carriers. - Graphical abstract: Structure and oxygen storage properties of BaErMn{sub 2}O{sub 5+δ}. - Highlights: • Synthesis of BaErMn{sub 2}O{sub 5} and BaErMn{sub 2}O{sub 6}. • Structural and transport properties of BaErMn{sub 2}O{sub 5+δ}. • Oxygen storage in BaErMn{sub 2}O{sub 5}–BaErMn{sub 2}O{sub 6} system. • Phase transitions in BaErMn{sub 2}O{sub 6}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystals, magnetic and electronic properties of a new ThCr{sub 2}Si{sub 2}-type BaMn{sub 2}Bi{sub 2} and K-doped compositions

This is a report on the new 122 ternary transition-metal pnictide of BaMn{sub 2}Bi{sub 2}, which is crystallized from bismuth flux. BaMn{sub 2}Bi{sub 2} adopts ThCr{sub 2}Si{sub 2}-type structure (I4/mmm) with a=4.4902(3) Å and c=14.687(1) Å; it is antiferromagnetic with anisotropic magnetic susceptibility and semiconducting with a band gap of E{sub g}=6 meV. Heat capacity result confirms the insulating ground state in BaMn{sub 2}Bi{sub 2} with the electronic residual Sommerfeld coefficient of γ=0. The high temperature magnetization results show that magnetic ordering temperature is T{sub N} ∼400 K. Hole-doping in BaMn{sub 2}Bi{sub 2} via potassium in Ba{sub 1−x}K{sub x}Mn{sub 2}Bi{sub 2} results in metallic behavior for x=0.10(1), 0.32(1) and 0.36(1). With K-doping, more magnetically anisotropic behavior is observed. Although there is a downturn in electrical resistivity and low-field magnetization data below 4 K in>30%-doped crystals, there is no sign of zero resistance or diamagnetism. - Graphical abstract: Local moment antiferromagnet BaMn{sub 2}Bi{sub 2}, the first bismuthide with ThCr{sub 2}Si{sub 2} structure, turns metallic upon K-doping. Highlights: • BaMn{sub 2}Bi{sub 2} and Ba{sub 1−x}K{sub x}Mn{sub 2}Bi{sub 2} (0≤x<0.4) measuring up to 1 cm in length have been synthesized from Bi flux reactions. • BaMn{sub 2}Bi{sub 2} is the first bismuthide with ThCr{sub 2}Si{sub 2}-type structure. • BaMn{sub 2}Bi{sub 2} is a small gap semiconductor but, upon hole-doping, turns metallic with a downturn in resistivity below 4 K. • BaMn{sub 2}Bi{sub 2} is a local moment antiferromagnet with T{sub N} ∼400 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Octahedral tilt transitions in the relaxor ferroelectric Na{sub 1/2}Bi{sub 1/2}TiO{sub 3}

The kinetics of octahedral tilt transitions in the lead-free relaxor material sodium bismuth titanate Na{sub 1/2}Bi{sub 1/2}TiO{sub 3} (NBT) is investigated by electronic structure calculations within density functional theory. Energy barriers for transitions between tetragonal, rhombohedral and orthorhombic tilts in cation configurations with [001]- and [111]-order on the A-sites are determined by nudged elastic band calculations. By tilting entire layers of octahedra simultaneously we find that the activation energy is lower for structures with 001-order compared to such with 111-order. The energetic coupling between differently tilted layers is, however, negligibly small. By introducing a single octahedral defect we create local tilt disorder and find that the deformation energy of the neighboring octahedra is less in a rhombohedral than in a tetragonal structure. By successively increasing the size of clusters of orthorhombic defects in a rhombohedral matrix with 001-order, we determine a critical cluster size of about 40 Å . Thus groups of about ten octahedra can be considered as nuclei for polar nanoregions, which are the cause of the experimentally observed relaxor behavior of NBT. - Graphical abstract: Nine orthorhombic oxygen octahedral tilt defects in a rhombohedral tilt configuration. - Highlights: • Chemical order influences energy barriers of octahedral tilt transitions. • The octahedral deformation energy is lower in rhombohedral phases. • Tilt defect clusters are more likely in rhombohedral structures. • Tilt defect clusters can act as nuclei for polar nanoregions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Faraday effect improvement by Dy{sup 3+}-doping of terbium gallium garnet single crystal

Highly transparent Dy{sup 3+}-doped terbium gallium garnet (TGG) single crystal was grown by Czochralski (Cz) method. Phase composition of the crystal was tested by XRD measurements. The distribution coefficient of Dy{sup 3+} in the crystal was obtained. The optical and magneto-optical properties were analyzed in detail, and magnetic properties of the Dy{sup 3+}-TGG crystal were studied. The paramagnetic behavior is observed down to 10 K. The as-grown crystal exhibited high optical transmittance, particularly in the visible region. The Faraday rotation was investigated over visible and near-infrared regions (VIS–NIR) at room temperature. The Verdet constants increase at measured wavelengths and high thermal stability was found in Dy{sup 3+}-doped TGG, as compared to the properties of pure TGG, indicating that Dy{sup 3+}-doped crystals are preferable for magneto-active materials used in Faraday devices at VIS–NIR wavelengths. - Graphical abstract: Highly transparent Dy{sup 3+}-doped terbium gallium garnet (TGG) and pure TGG single crystals were grown by Czochralski method. The Dy{sup 3+}-doped TGG possesses 20–30% higher Verdet values in reference to TGG independently on wavelength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and physical properties of the high pressure perovskite layered Sr{sub 4}Cr{sub 3}O{sub 10} chromate

We report on the structure and physical properties of a bidimensional chromate, Sr{sub 4}Cr{sub 3}O{sub 10}, the n=3 member of the Ruddlesden-Popper Sr{sub n+1}Cr{sub n}O{sub 3 n+1} series. For the first time, using complementary x-ray powder diffraction and electron diffraction data, we have solved its layered crystallographic structure. Our study shows also that this high pressure phase is insulating and antiferromagnetic below T{sub N}=280 K, a similar behavior already observed for n=1, 2 and n=+∞ members.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights into the phase stability window, phase transformation behavior, and anisotropic thermal expansion of rhombohedral bismuth oxide

Rhombohedral bismuth oxide has emerged as a promising SOFC electrolyte material, particularly at low-to-intermediate temperatures. The stability window of this phase was explored using a co-doped system, using yttrium and lanthanum or aluminum, over 7.5–25 % total dopant content and 0.907–1.154 Å weighted average dopant cationic radius. The phase transformation behavior of rhombohedral-rich phase mixtures was also investigated in situ from 360 to 656 °C to assess the effects of minor impurity phases and thermal evolution pathways. Our results reveal that low-dopant, rhombohedral-rich compositions exhibit poor structural stability upon heating. Anisotropic thermal expansion behavior was observed over 450–656 °C, serving as a sensitive indicator of sequential phase changes, including the rhombohedral β2-to-β1 transition (∼450 °C), monoclinic phase formation, and delayed or incomplete formation of the cubic phase (∼ 550 °C). These multiple unfavorable phase transitions compromise the mechanical robustness required for SOFC operation. This study underscores the need for compositional tuning to balance ionic conductivity with thermal phase stability in rhombohedral Bi 2 O 3 -based systems.

36 MATERIALS SCIENCE↗

Cation distribution in the Bi{sub 4-x}RE{sub x}Ti{sub 3}O{sub 12} (RE = La, Nd) solid solution and Curie temperature dependence

Bi{sub 4-x}RE{sub x}Ti{sub 3}O{sub 12} (RE = La, Nd) ferroelectric powders were prepared by a co-precipitation route. Raman spectroscopy and X-ray diffraction were employed to determine the crystal site of La{sup 3+} and Nd{sup 3+} as well as the effect of their addition on the crystal structure. It was found that La atoms were not only placed preferentially in pseudo-perovskite A sites for concentrations x {<=} 1.2 but also substituted for Bi{sup 3+} in (Bi{sub 2}O{sub 2}){sup 2+} layers for greater concentrations. A similar behavior was observed with the limit value x = 0.8 in case of Nd{sup 3+}. In solid solution La or Nd{sup 3+} ions diminish the distortions in the octahedron formed by oxygen atoms, so there is a tendency to undergo a transition in crystal symmetry from orthorhombic to tetragonal. Finally differential scanning calorimetry (DSC) shows a linear dependence of the Curie temperature (T{sub c}) when the amount of La{sup 3+} or Nd{sup 3+} was increased.

36 MATERIALS SCIENCE↗

Effect of Y/Ti atomic ratio on microstructure of oxide dispersion strengthened alloys

Highlights: • Controlling nano oxide distributions in ODS alloys by tuning Y/Ti ratio. • Advanced characterization techniques have been conducted to comprehensively study the various nano oxides. • A recipe with a Y/Ti ratio of 0.4 was found and the intrinsic oxide formation mechanism was explained. - Abstract: Oxide dispersion strengthened (ODS) alloys are the leading candidate materials for advanced fission and fusion reactor components because of their excellent high temperature creep strength and radiation tolerance. The promising performance of ODS alloys relies on a high-density population of nano oxides. Here, four 9Cr-ODS alloys with varying initial Y/Ti atomic ratio were processed using a combined route of mechanical alloying (MA) and hot isostatic pressing (HIP). Microstructural characterizations of the consolidated alloys were examined by advanced transmission electron microscopy (TEM). Great differences in oxide distribution behavior were observed. 9Cr-ODS alloy with a Y/Ti ratio of 0.4 presented the finest and the highest number density of nano oxides among the four alloys. The effects of Y/Ti ratio on oxide formation were explored, and the precipitated mechanisms of the nano oxides were interpreted.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis, structural and physico-chemical characterizations of two Nasicon phosphates: M{sub 0.50}{sup II}Ti{sub 2}(PO{sub 4}){sub 3} (M = Mn, Co)

The family of titanium Nasicon-phosphates of generic formula M{sub 0.5}{sup II}Ti{sub 2}(PO{sub 4}){sub 3} has been revisited using hydrothermal techniques. Two phases have been synthesized: Mn{sub 0.5}{sup II}Ti{sub 2}(PO{sub 4}){sub 3} (MnTiP) and Co{sub 0.5}{sup II}Ti{sub 2}(PO{sub 4}){sub 3} (CoTiP). Single crystal diffraction studies show that they exhibit two different structural types. Mn{sub 0.5}{sup II}Ti{sub 2}(PO{sub 4}){sub 3} phosphate crystallizes in the R-3 space group, with the cell parameters a = 8.51300(10) A and c = 21.0083(3) A (V = 1318.52(3) A{sup 3} and Z = 6). The Co{sub 0.5}{sup II}Ti{sub 2}(PO{sub 4}){sub 3} phosphate crystallizes in the R-3c space group, with a = 8.4608(9) A and c = 21.174(2) A (V = 1312.7(2) A{sup 3} and Z = 6). These two compounds are clearly related to the parent Nasicon-type rhombohedral structure, which can be described using [Ti{sub 2}(PO{sub 4}){sub 3}] framework composed of two [TiO{sub 6}] octahedral interlinked via three [PO{sub 4}] tetrahedra. {sup 31}P magic-angle spinning nuclear magnetic resonance (MAS-NMR) data are presented as supporting data. Curie-Weiss-type behavior is observed in the magnetic susceptibility. The phases are also characterized by IR spectroscopy and UV-visible.

36 MATERIALS SCIENCE↗

Surface modification of superparamagnetic iron nanoparticles with calcium salt of poly({gamma}-glutamic acid) as coating material

Surface-modified magnetite nanoparticles (MNPs) were synthesized by co-precipitation of aqueous solution of ferrous and ferric salts (molar ratio 1:2) upon adding a base followed by calcium salt of poly({gamma}-glutamic acid) (Ca-{gamma}-PGA) for uniform coating on the surface of MNPs. Both uncoated and Ca-{gamma}-PGA-coated MNPs were characterized using various techniques including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and vibrating sample magnetometric (VSM) studies. Compared with bare MNPs, the IR spectra of coated MNPs showed characteristic peaks of {gamma}-PGA, implying the {gamma}-PGA coating on MNPs did occur. The TEM images depicted an average size of 8-10 nm for bare MNPs and 14 nm for coated MNPs, with their shape being spherical in nature. In the presence of applied magnetic field, a superparamagnetic behavior was observed at room temperature for both bare and Ca-{gamma}-PGA-coated MNPs, with no magnetism left upon magnetic-field removal.

36 MATERIALS SCIENCE↗

Oxygen adsorption and electronic transport properties of Fe-substituted YBaCo{sub 4}O{sub 7} compounds

Graphical abstract: - Highlights: • The conduction mechanism of YBaCo{sub 4}O{sub 7} system was established. • The effect of Fe substitution on the electronic transport was discussed. • The effect of oxygen adsorption/desorption processes on the transport properties was investigated. - Abstract: YBaCo{sub 4−x}Fe{sub x}O{sub 7} (0.0 ≤ x ≤ 0.8) samples were prepared by the solid-state reaction method and the effect of Fe substitution and oxygen adsorption/desorption on the electronic transport properties was investigated from room temperature to 900 °C. Fe for Co substitution results in a slight decline in the oxygen storage capacity at lower temperature (200–400 °C) and an increase of the phase-decomposition temperature at higher temperature (700–900 °C). Both the hole concentration and mobility are reduced in the Fe-containing compositions. Electrical resistivity, Seebeck coefficient, and conduction activation energy increase with the increasing Fe content. A close correlativity between oxygen adsorption and electronic transport behavior was observed in YBaCo{sub 4−x}Fe{sub x}O{sub 7} system. Oxygen adsorption decreases the electrical resistivity and Seebeck coefficients because of the increase of hole concentration at lower temperature and the phase decomposition at higher temperature.

36 MATERIALS SCIENCE↗

Dielectric, ferroelectric and piezoelectric properties of Nb{sup 5+} doped BCZT ceramics

Highlights: • Average grain size of BCZT ceramic decreased with the increasing Nb{sup 5+} doping. • Dielectric constant value is enhanced with Nb{sup 5+} doping. • Dielectric loss of BCZT − x Nb{sup 5+} ceramics was less than 0.03 at room temperature (1 kHz). • Piezoelectric coefficient decreased with the increasing Nb{sup 5+} doping. • The relaxation behavior is enhanced with the doping of Nb{sup 5+}. - Abstract: This work investigated the electrical properties of Nb{sup 5+} (0.0–1.0 mol%) doped with Ba{sub 0.90}Ca{sub 0.10}Zr{sub 0.10}Ti{sub 0.90}O{sub 3} while adding 1 mol% of Ba{sub 0.90}Ca{sub 0.10}Zr{sub 0.10}Ti{sub 0.90}O{sub 3} seeds. The mixed powder was ball milled for 24 h, calcined and sintered at 1200 °C for 2 h and 1450 °C for 4 h, respectively. The XRD patterns of the ceramic samples were investigated by X-ray diffraction. The electrical properties of ceramics were measured and the results indicated that all samples show a pure perovskite phase with no secondary phase. Density and average grain size values were in the range of 5.60–5.71 g/cm{sup 3} and 12.62–1.86 μm, respectively. The highest dielectric constant, ϵ{sub r} at room temperature (1 kHz) was 4636 found at 1.0 mol% Nb. The dielectric loss, tan δ was less than 0.03 for all samples at room temperature (1 kHz). Other electrical properties, P{sub r}, d{sub 33} and k{sub p} values were decreased with Nb doped relates to the decreasing grain size in BCZT ceramics. Moreover, the degrees of phase transition diffuseness and relaxation behavior were observed in the higher Nb doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical characterization of Mn doped-(Ba{sub 0.3}Sr{sub 0.7})Mn{sub x}(Ti{sub 0.9}Zr{sub 0.1}){sub 1-x}O{sub 3} ceramics

Highlights: • Solid state processing of the (Ba{sub 0.3}Sr{sub 0.7})Mn{sub x}(Ti{sub 0.9}Zr{sub 0.1}){sub 1−x}O{sub 3} ceramics. • Mn incorporated on the Ti-site into the host lattice of (Ba{sub 0.3}Sr{sub 0.7})Mn{sub x}(Ti{sub 0.9}Zr{sub 0.1}){sub 1−x}O{sub 3}. • NTCR behavior was observed in the sintered samples. - Abstract: (Ba{sub 0.3}Sr{sub 0.7})Mn{sub x}(Ti{sub 0.9}Zr{sub 0.1}){sub 1-x}O{sub 3} (x = 0.00, 0.013, 0.015 and 0.05) ceramics were prepared by solid state sintering route at the 1500 °C for 6 h in air. Effect of Mn substitution on the structure of Ba{sub 0.3}Sr{sub 0.7}(Ti0{sub .9}Zr{sub 0.1}){sub 1−x}O{sub 3} perovskite was investigated systematically. Dielectric and impedance spectroscopic studies were conducted to understand the electronic microstructure of the Ba{sub 0.3}Sr{sub 0.7}(Ti0{sub .9}Zr{sub 0.1}){sub 1−x}O{sub 3} ceramics. Sample with x = 0.05 showed the highest dielectric constant (ϵ{sub r} = 1826) and low dielectric loss (tanδ = 0.001) at 10 kHz, around the room temperature, while the sample with x = 0.00 showed good microwave (MW) dielectric properties (Qf{sub o} = 838 and ϵ{sub r} = 550). The impedance spectroscopic analysis confirmed the electrical homogeneity of the samples with x = 0.013, 0.015 and 0.05, where grain boundaries dominated the conduction mechanism. Similarly, the sample with x = 0.00 was found to possess both grain boundary and bulk resistive contributions.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of nanocrystalline Bi{sub 1-x}La{sub x}FeO{sub 3} (0.0 ≤ x ≤ 0.4) synthesized by a mechanochemical route

Highlights: • A mechanochemical reaction produces Bi{sub 1-x}La{sub x}FeO{sub 3} and NaCl in ambient conditions. • Heating at 600 °C and ulterior washing yields ferrite phase for all the compositions. • The synthesized powders consist of agglomerates of Bi{sub 1-x}La{sub x}FeO{sub 3} nanoparticles. • La-content influences the crystal structure and Néel temperature of the materials. • The presence of two canting levels of antiparallel spins causes a complex magnetism. - Abstract: Bi{sub 1-x}La{sub x}FeO{sub 3} (0.0 ≤ x ≤ 0.4) powders were prepared by means of a solid acid-base reaction induced by mechanochemical energy. Bi, La and Fe chlorides were high-energy ball-milled with NaOH, yielding a mixture of Bi{sub 1-x}La{sub x}FeO{sub 3} and NaCl. After heating and washing, nanoparticles of Bi{sub 1-x}La{sub x}FeO{sub 3} were obtained as a main product, with low contents of secondary phases. Structural characterization was performed by X-ray diffraction (Rietveld refinement) and Raman spectroscopy. The hyperfine magnetic behavior was analyzed by means of Mössbauer spectroscopy and the microstructure of the particles was evaluated by transmission electron microscopy. Differential scanning calorimetry was employed to investigate the thermal behavior of the samples and magnetic measurements at room temperature were also carried out. Crystal structure transitions as a function of composition were identified. Moreover, an intricate magnetic behavior was observed, which was explained on the basis of the concomitant contribution of two different canting levels of the antiparallel spins.

36 MATERIALS SCIENCE↗

CO2/light gas separation performance of cross-linked poly(vinylimidazolium) gel membranes as a function of ionic liquid loading and cross-linker content

A series of cross-linked poly(vinylimidazolium)-RTIL gel membranes was synthesized and evaluated for room-temperature, ideal CO2/N-2, CO2/CH4, and CO2/H-2 separation performance. The membranes were formed by photo-polymerization of oligo(ethylene glycol)-functionalized cross-linking (i.e., di-functional) and non-cross-linking (i.e., mono-functional) vinylimidazolium RTIL monomers with nonpolymerizable, "free RTIL." The effect of free RTIL ([emim][Tf2N]) loading on CO2 separation performance was evaluated by varying RTIL loading at three levels (45, 65, and 75 wt.%). The effect of cross-linker content on CO2 separation performance was also evaluated by varying the copolymer composition of cross-linked membranes from 5 to 100 mol% di-functional monomer. The substituent on the monofunctional RTIL monomer was also varied to investigate the effect of substituent structure and chemistry on CO2 separation performance. CO2 permeability was dramatically increased with higher loading of free RTIL. Increased RTIL loading had no effect on CO2/N-2 or CO2/CH4 permeability selectivity, but significantly improved CO2/H-2 permeability selectivity. Reducing the cross-linking monomer concentration generally improved CO2 permeability. However, anomalous permeability and selectivity behavior was observed below critical concentrations of cross-linker. The effect of the substituent on the monofunctional monomer on CO2 separation performance was minimal compared to the effects of RTIL loading and copolymer composition. (C) 2012 Elsevier B.V. All rights reserved.

Carlisle, TK↗

Effects of Cold Rolling on Microstructure and Mechanical Properties of Fe-30Mn-3Si-4Al-0.093C TWIP Steel

The effects of cold rolling on microstructure evolution and the associated mechanical properties of Fe-30Mn-3Si-4Al-0.093C twinning-induced plasticity (TWIP) steel are examined in this work with reduction rates of 10%, 20%, 30%, 40%, 50%, 60%, and 70%. Through texture analysis and transmission electron microscopy (TEM) observations, it is suggested that slip, mechanical twinning, the interaction between dislocation/twin boundaries (TB), and shear band have influenced the observed mechanical behavior and development of texture. Special components of weak initial textures are preferential for mechanical twinning, resulting in an increase in strain hardening rate. By mechanical twinning, the {111}<112> orientation is rotated into a position at the vicinity of the {110}<001> Goss orientation, and the {552}<115> (Cu-twin) texture is transformed to the {110}<001> orientation. The evolution of texture is closely related to the onset of shear banding resulting from deformation twinning. The sample with 10% cold reduction exhibits a favorable combination of yield strength and ductility, indicating a considerable capacity for energy absorption. With increasing rolling reductions, the deformation of the samples becomes inhomogeneous due to the high anisotropy of the microstructure. The localized shear bands resulting from the excessive cold rolling are detrimental to the ductility of the present TWIP steel.

Shen, Yongfeng↗