Search NASA⌕ Search

SEARCH · Search NASA

Results for “pulse generators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Generating Quasi-Single-Cycle Relativistic Laser Pulses by Laser-Foil Interaction

A scheme for producing nearly single-cycle relativistic laser pulses is proposed. When a laser pulse interacts with an overdense thin foil, because of self-consistent nonlinear modulation, the latter will be more transparent to the more intense part of the laser, so that a transmitted pulse can be much shorter than the incident pulse. Using two-dimensional particle-in-cell simulation and analytical modeling, it is found that a transmitted pulse of duration 4 fs and peak intensity 3x10{sup 20} W/cm{sup 2} can be generated from a circularly polarized laser pulse. The intensity of the resulting pulse is only limited by that of the incident pulse, since this scheme involves only laser-plasma interaction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nanosecond room-temperature Fe : ZnSe laser pumped inside the resonator of a transversely diode-pumped Er : YLF laser

Lasing at room temperature is obtained in a Fe : ZnSe crystal installed as a passive Q-switch in a diode-pumped Er : YLF laser resonator. A miniresonator of the Fe : ZnSe laser is formed by mirrors pressed against the optical surfaces of the crystal with high reflectivities at λ = 4 − 4.5 μm and a high transmittance for the Er : YLF laser generation lines. In the Er : YLF laser resonator, short pulses of ∼100 ns duration at λ = 2.65 μm are generated, stipulated by passive Q-switching of the resonator by the Fe : ZnSe crystal. The absorption of the Er : YLF laser radiation in the Fe : ZnSe crystal leads to the pumping of Fe : ZnSe laser, which generates pulses with a duration of less than 50 ns and an energy of ∼0.5 μJ at λ = 4.2 μm. The laser operates in the pulse-periodic pump regime with a repetition rate up to 200 Hz. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase-controllable spin wave generation in iron garnet by linearly polarized light pulses

A phase-controlled spin wave was non-thermally generated in bismuth-doped rare-earth iron garnet by linearly polarized light pulses. We controlled the initial phase of the spin wave continuously within a range of 180° by changing the polarization azimuth of the excitation light. The azimuth dependences of the initial phase and amplitude of the spin wave were attributed to a combination of the inverse Cotton-Mouton effect and photoinduced magnetic anisotropy. Temporally and spatially resolved spin wave propagation was observed with a CCD camera, and the waveform was in good agreement with calculations. A nonlinear effect of the spin excitation was observed for excitation fluences higher than 100 mJ/cm{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pulse width dependence of magnetic field generation using laser-powered capacitor coils

Megagauss magnetic fields were generated by a current flowing through a U-shaped coil connecting two parallel copper foils. Two kJ-class lasers at various pulse widths from 2 ns to 9.9 ns passed through holes in the front foil and were focused on the back foil with an intensity of ~1.7×10 16 W/cm 2 . The coil current and resulting magnetic fields were characterized using ultrafast proton radiography, timed at the end of the laser pulses. Additionally, the measurements show that magnetic field strength decays with increasing laser pulse width. A lumped-circuit model was developed and showed consistency with the experimental measurements, demonstrating an ion shorting effect: as the ion current neutralizes the electron current contribution to interplate voltage, the coil current peaks on a timescale close to the ion transit time t i = d/v ion . FLASH simulations of the coil current are performed, and the calculated resistance values are used to constrain ion speed as a function of hot electron temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pulsed-Power Innovations for Next-Generation, High-Current Drivers

There are proposals to build larger high-current drivers to be used for high-energy-density physics (HEDP), inertial confinement fusion (ICF), radiation effects testing, and basic science. Drivers significantly larger than the Z Machine at Sandia National Laboratories, Albuquerque, NM, USA, encounter increasing difficulties in water power flow, insulator performance, and vacuum power flow. The physics requirements of imploding loads limit a designer’s flexibility in choosing machine parameters, such as current rise time, driving impedance, and total inductance. This article enumerates these physics constraints and shows how they impact driver design. Here, we conclude that advances in pulsed-power capabilities are needed to control risk and to build a cost-effective driver at peak currents of ~60 MA.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Suppression and enhancement of electromagnetic pulses from laser–target interactions by strong magnetic fields

Laser–target interactions generate intense electromagnetic pulses (EMPs) that can interfere with measurements and damage equipment. In this paper we show that applying a magnetic field to nanosecond pulse laser–target interactions decreases the magnitude of EMPs. We demonstrate this effect in two experiments with different geometries (spherical versus planar), laser intensities ( ∼10 13 versus ∼10 15 W/cm 2 ) and applied field strength (12 versus 0.1 T) that both observed suppression of EMPs in approximately the 1 GHz band (by factors of 0.65× and 0.32×, respectively). We then observe the opposite effect at high intensities with a picosecond pulse: for planar experiments with laser intensities of approximately 10 19 W/cm 2 and magnetic fields of 6–10 T, the magnitude of EMPs is increased by a factor of 1.75×. These results provide a benchmark for models of EMP generation, but suggest that magnetic fields are not a viable solution for mitigating EMPs in the high-intensity laser facilities where they are most damaging.

electromagnetic pulse↗

Electric field induced needle-pulsed arc discharge carbon nanotube production apparatus: Circuitry and mechanical design

A simple and low cost apparatus is reported to produce multiwall carbon nanotubes and carbon nano-onions by a low power short pulsed arc discharge reactor. The electric circuitry and the mechanical design details and a micro-filtering assembly are described. The pulsed-plasma is generated and applied between two graphite electrodes. The pulse width is 0.3 {mu}s. A strong dc electric field is established along side the electrodes. The repetitive discharges occur in less than 1 mm distance between a sharp tip graphite rod as anode, and a tubular graphite as cathode. A hydrocarbon vapor, as carbon source, is introduced through the graphite nozzle in the cathode assembly. The pressure of the chamber is controlled by a vacuum pump. A magnetic field, perpendicular to the plasma path, is provided. The results show that the synergetic use of a pulsed-current and a dc power supply enables us to synthesize carbon nanoparticles with short pulsed plasma. The simplicity and inexpensiveness of this plan is noticeable. Pulsed nature of plasma provides some extra degrees of freedom that make the production more controllable. Effects of some design parameters such as electric field, pulse frequency, and cathode shape are discussed. The products are examined using scanning probe microscopy techniques.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Terahertz inline wall thickness monitoring system for plastic pipe extrusion

Conventional and commercially available inline wall thickness monitoring systems for pipe extrusion are usually based on ultrasonic or x-ray technology. Disadvantages of ultrasonic systems are the usual need of water as a coupling media and the high damping in thick walled or foamed pipes. For x-ray systems special safety requirements have to be taken into account because of the ionizing radiation. The terahertz (THz) technology offers a novel approach to solve these problems. THz waves have many properties which are suitable for the non-destructive testing of plastics. The absorption of electrical isolators is typically very low and the radiation is non-ionizing in comparison to x-rays. Through the electromagnetic origin of the THz waves they can be used for contact free measurements. Foams show a much lower absorption in contrast to acoustic waves. The developed system uses THz pulses which are generated by stimulating photoconductive switches with femtosecond laser pulses. The time of flight of THz pulses can be determined with a resolution in the magnitude of several ten femtoseconds. Hence the thickness of an object like plastic pipes can be determined with a high accuracy by measuring the time delay between two reflections on materials interfaces e.g. at the pipe's inner and outer surface, similar to the ultrasonic technique. Knowing the refractive index of the sample the absolute layer thickness from the transit time difference can be calculated easily. This method in principle also allows the measurement of multilayer systems and the characterization of foamed pipes.

36 MATERIALS SCIENCE↗

Generation of intense coherent attosecond X-ray pulses using relativistic electron mirrors

We analyse the steepening of the leading edge of femtosecond petawatt pulses with the use of plasma layers and show that, at an electron density several times higher than the critical one, an asymmetric (in time domain) pulse can be produced with an amplitude of the first half-wave differing little from the maximum pulse amplitude. Using numerical simulation, we have studied the interaction of such pulses with nanometre-thick films, including the generation of relativistic electron mirrors and the reflection of a counterpropagating probe pulse from such mirrors. The resulting coherent X-ray pulses have a duration of {approx}120 as and a power of {approx}600 GW at a wavelength of {approx}13 nm. Our results demonstrate that the reflectivity of a relativistic electron mirror situated in the accelerating pulse field is independent of the probe pulse amplitude when it increases up to the accelerating pulse amplitude. (interaction of laser radiation with matter. laser plasma)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fibre amplifier based on an ytterbium-doped active tapered fibre for the generation of megawatt peak power ultrashort optical pulses

We report a new ytterbium-doped active tapered fibre used in the output amplifier stage of a fibre laser system for the generation of megawatt peak power ultrashort pulses in the microjoule energy range. The tapered fibre is single-mode at its input end (core and cladding diameters of 10 and 80 μm) and multimode at its output end (diameters of 45 and 430 μm), but ultrashort pulses are amplified in a quasi-single-mode regime. Using a hybrid Er/Yb fibre system comprising an erbium master oscillator and amplifier at a wavelength near 1.5 μm, a nonlinear wavelength converter to the 1 μm range and a three-stage ytterbium-doped fibre amplifier, we obtained pulses of 1 μJ energy and 7 ps duration, which were then compressed by a grating-pair dispersion compressor with 60% efficiency to a 130 fs duration, approaching the transform-limited pulse duration. The present experimental data agree well with numerical simulation results for pulse amplification in the threestage amplifier. (extreme light fields and their applications)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Propagation effects for attosecond ionization control of efficient broadband supercontinuum generation

Isolated attosecond uv pulse provides a robust tool to control the high-order harmonic generation and efficient broadband supercontinua have been generated in this attosecond ionization control scheme at microscopic level. Here, we investigate the influences of propagation effects on the supercontinua. We find that efficient broadband supercontinua, which are enhanced by two or three orders of magnitude, can also be obtained at macroscopic level when the harmonics emitted from the short quantum path are phase matching. Moreover, the modulations in the supercontinua are eliminated and the bandwidths of the supercontinua are broadened after propagation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Test of Weak Equivalence Principle with the Multi-band Timing of the Crab Pulsar

The Weak Equivalent Principle (WEP) can be tested through the parameterized post-Newtonian parameter γ, representing the space curvature produced by unit rest mass. The parameter γ in turn has been constrained by comparing the arrival times of photons originating in distant transient events, such as gamma-ray bursts, fast radio bursts, and giant pulses of pulsars. Those measurements normally correspond to an individual burst event with very limited energy bands and signal-to-noise ratios (S/Ns). In this paper, the discrepancy in the pulse arrival times of the Crab Pulsar between different energy bands is obtained by the phase difference between corresponding pulse profiles. This allows us to compare the pulse arrival times at the largest energy band differences, between radio and optical, radio and X-ray, and radio and gamma-ray respectively. Because the pulse profiles are generated by phase-folding thousands of individual pulses, the time discrepancies between two energy bands are actually measured from thousands of events at each energy band, which corresponds to a much higher S/N. The upper limit of the γ discrepancy set by such an extensively observed and well-modeled source is as follows: γ{sub radio}--γ{sub γ-ray}<3.28×10{sup −9} at the energy difference of E{sub γ-ray}/E{sub radio}∼10{sup 13}, γ{sub radio}--γ{sub X-ray}<4.01×10{sup −9} at the energy difference of E{sub X-ray}/E{sub radio}∼10{sup 9}, γ{sub radio}--γ{sub optical}<2.63×10{sup −9} at E{sub optical}/E{sub radio}∼10{sup 5}, and γ{sub optical}--γ{sub γ-ray}<3.03×10{sup −10} at E{sub γ-ray}/E{sub optical}∼10{sup 8}. This actually measures the arrival times of freely falling photons in the gravitational field of the Milky Way with the largest amount of events and with data of the highest S/N, which tests WEP at energy band differences that have never been reached before.

79 ASTRONOMY AND ASTROPHYSICS↗

Linear operating region in the ozone dial photon counting system

Ozone is a relatively unstable molecule found in Earth's atmosphere. An ozone molecule is made up of three atoms of oxygen. Depending on where ozone resides, it can protect or harm life on Earth. High in the atmosphere, about 15 miles up, ozone acts as a shield to protect Earth's surface from the sun's harmful ultraviolet radiation. Without this shield, we would be more susceptible to skin cancer, cataracts, and impaired immune systems. Closer to Earth, in the air we breathe, ozone is a harmful pollutant that causes damage to lung tissue and plants. Since the early 1980's, airborne lidar systems have been used for making measurements of ozone. The differential absorption lidar (DIAL) technique is used in the remote measurement of O3. This system allows the O3 to be measured as function of the range in the atmosphere. Two frequency-doubled Nd:YAG lasers are used to pump tunable dye lasers. The lasers are operating at 289 nm for the DIAL on-line wavelength of O3, and the other one is operated at 300 nm for the off-line wavelength. The DIAL wavelengths are produced in sequential laser pulses with a time separation of 300 micro s. The backscattered laser energy is collected by telescopes and measured using photon counting systems. The photon counting system measures the light signal by making use of the photon nature of light. The output pulse from the Photo-Multiplier Tube (PE), caused by a photon striking the PMT photo-cathode, is amplified and passed to a pulse height discriminator. The peak value of the pulse is compared to a reference voltage (discrimination level). If the pulse amplitude exceeds the discrimination level, the discriminator generates a standard pulse which is counted by the digital counter. Non-linearity in the system is caused by the overlapping of pulses and the finite response time of the electronics. At low count rates one expects the system to register one event for each output pulse from the PMT corresponding to a photon incident upon the photocathode, however, at higher rates the limitations of the discrimination/counting system will cause the observed count rate to be non-linear with respect to the true count rate. Depending on the pulse height distribution and the discriminator level, the overlapping of pulses (pulse pile-up) can cause count loss or even an additional apparent count gain as the signal levels increase. Characterization of the system, including the pulse height distribution, the signal to noise ratio, and the effect of the discriminator threshold level, is critical in maximizing the linear operating region of the system, thus greatly increasing the useful dynamic range of the system.

Andrawis, Madeleine↗

Beam Echo Effect for Generation of Short-Wavelength Radiation

The Echo-Enabled Harmonic Generation (EEHG) FEL uses two modulators in combination with two dispersion sections to generate a high-harmonic density modulation starting with a relatively small initial energy modulation of the beam. After presenting the concept of the EEHG, we address several practically important issues, such as the effect of coherent and incoherent synchrotron radiation in the dispersion sections. Using a representative realistic set of beam parameters, we show how the EEHG scheme enhances the FEL performance and allows one to generate a fully (both longitudinally and transversely) coherent radiation. We then discuss application of the echo modulation for generation of attosecond pulses of radiation, and also using echo for generation of terahertz radiation. We present main parameters of a proof-of-principle experiment currently being planned at SLAC for demonstration of the echo modulation mechanism.

43 PARTICLE ACCELERATORS↗

System and method for large-area pulsed laser melting of metallic powder in a laser powder bed fusion application

The present disclosure relates to systems and methods for performing large area laser powder bed fusion (LBPF) to form a plurality of layers of a 3D part in a layer-by-layer fashion using meltable powder particles. In one implementation the system makes use of a first light source, which may be a diode laser subsystem, for generating a first light pulse of a first duration. The first light is used to preheat a substrate underneath a new layer of powder particles, wherein the substrate is formed from a previously fused quantity of the powder particles. A second light source, which may be a pulse laser, generates a second light pulse subsequent to the first light pulse. The second light pulse has a second duration shorter than the first duration by a factor of at least about 10, and fully melts the new layer of powder particles in addition to the substrate, to achieve a smooth printed layer. The wavelength of the first light pulse also differs from a wavelength of the second light pulse.

Khairallah, Saad A.↗

Physical mechanism of electron bunch generation by an ultrarelativistic-intensity laser pulse passing through a sharp plasma boundary

The physical mechanism of the interaction process of a laser pulse of ultrarelativistic intensity with semi-bounded plasma having a sharp boundary is studied in one-dimensional geometry. It is shown that electron bunches are generated by the laser pulse due to the multiflow motion of plasma electrons with crossing trajectories. An analytical relation that allows an electron bunch charge to be estimated as a function of plasma characteristics and electron trajectory parameters is derived and confirmed by the results of numerical simulations. (paper)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional reconstruction of THz near-fields from a LiNbO3 optical rectification source

Terahertz (THz) generation by optical rectification in LiNbO3 (LN) is a widely used technique for generating intense THz radiation. The spatiotemporal characterization of THz pulses from these sources is currently limited to far-field methods. While simulations of tilted pulse front THz generation have been published, little work has been done to measure the near-field properties of the THz source. A better understanding of the THz near-field properties will improve optimization of THz generation efficiency, transport, and coupling. We demonstrate a technique for quantitative spatiotemporal characterization of single-cycle strong-field THz pulses with 2-D near-field electro-optic imaging. We have reconstructed the full temporal 3D THz near-field and shown how the phase front can be tailored by controlling the incident pump pulse.

Gabriel, Annika↗

Widely tunable femtosecond solitonic radiation in photonic crystal fiber cladding

We report on a means to generate tunable ultrashort optical pulses. We demonstrate that dispersive waves generated by solitons within the small-core features of a photonic crystal fiber cladding can be used to obtain femtosecond pulses tunable over an octave-wide spectral range. The generation process is highly efficient and occurs at the relatively low laser powers available from a simple Ti:sapphire laser oscillator. The described phenomenon is general and will play an important role in other systems where solitons are known to exist.

74 ATOMIC AND MOLECULAR PHYSICS↗