Search NASA⌕ Search

SEARCH · Search NASA

Results for “reflected”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

UV–Visible reflectance of common light reflectors and their degradation after an ionization dose up to 100 Mrad

We report light reflectors are widely used to enhance scintillation light collection. Their enhancement level depends on the reflector’s reflectance at the scintillator’s emission wavelength. We report UV–Visible reflectance spectra, relative to BaSO 4 , for several common reflectors. Also reported is their radiation hardness against an ionization dose up to 100 Mrad. The results of this investigation provide a reference for applications of these reflectors in a severe radiation environment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Emissivity of solar cell cover glass calculated from infrared reflectance measurements

The thermal emissivity of solar cell cover glasses with differences in glass composition or manufacture and surface texture are evaluated using specular and specular+diffuse infrared reflectance at different angles of incidences. Non-textured and textured glasses all exhibit similar emissivity at all angles of incidence regardless of composition and patterning. Both diffuse and specular reflectance must be included for textured glass at any angle of incidence and may be needed for planar glass at a high angle of incidences to properly determine emissivity.

14 SOLAR ENERGY↗

Sub-micrometer random-pyramid texturing of silicon solar wafers with excellent surface passivation and low reflectance

Select emerging solar cell technologies, ranging from very narrow screen-printed fingers to perovskite/silicon tandems, would benefit from a reduction of the height of the standard pyramidal texture of monocrystalline silicon wafers to below 1 μm. However, fabricating such small surface features usually compromises the requisite low reflectance and high passivation quality. Through systematic design of experiments, we demonstrate that conventional alkaline-based wet-chemical etching processes can be tuned to produce dense, spatially homogeneous, and uniformly sized sub-micrometer pyramids. Precise texture size can be further controlled by adding potassium silicate to the texturing solution to effectively slow the pyramid growth rate and promote nucleation. With pyramid size distribution data—extracted from multiple atomic force microscopy images across each wafer—we demonstrate 16 nanotextures with average pyramid sizes ranging from 62 to 512 nm, with the largest having only 0.3% of its pyramids taller than 1 μm. Six of the nanotextures exhibit light trapping and surface defect densities comparable to state-of-the-art microtextured wafers. In conclusion, the best nanotexture achieved an AM1.5G-weighted reflectance of 11.8% and a minority-carrier lifetime of 3.4 ms after passivation with amorphous silicon, demonstrating that smaller textures need not deteriorate solar cell performance.

14 SOLAR ENERGY↗

Development of an Attenuated Total Reflectance–Ultraviolet–Visible Probe for the Online Monitoring of Dark Solutions

Optical spectroscopy is a valuable tool for on-line monitoring of a variety of processes. Ultraviolet-visible (UV-vis) spectroscopy in particular, can monitor the concentration of analytes as well as identify speciation and oxidation state. However, it can be difficult to impossible to employ UV-vis based sensors on chemical systems that are very dark (i.e., high optical density) as exceedingly short pathlengths are required (for transmission approaches) or effective means of backscattering are needed (for reflectance approaches). Examples of processes that would benefit significantly from the use of optical sensors and encounter these challenges include used nuclear fuel recycling and molten salts with high concentrations of dissolved uranium. Utilizing an attenuated total reflectance (ATR) UV-vis approach can overcome these challenges and allow for the measurement of solutions orders of magnitude more concentrated than transmission UV-vis. However, determining ideal sensor specifications for varied processes can be time consuming and expensive. Here, in this study, we evaluate the ability for a novel ATR-UV-vis probe to measure very concentrated solutions of Co(II) and Ni(II) nitrate as well as organic dyes (methylene blue, acid red 1, and crystal violet). This sensor design provides a modular method for exploring possible “pathlengths” by altering the exposed ATR fiber length. Also studied were approaches to loading and measuring the sensor cell. These results are compared to a traditional 1 cm cuvette measured by transmission UV-vis. It was found that the ATR-UV-vis probe was capable of measuring solutions 600 times more concentrated than the 1 cm cuvette. Advanced data analysis in the form of multivariate curve resolution (MCR) was used to analyze the speciation of methylene blue over a large concentration range. The application of this novel ATR-UV-vis probe to the interrogation of dark solutions is a promising avenue for use in on-line monitoring of nuclear processes.

47 OTHER INSTRUMENTATION↗

Lensless x-ray imaging in reflection geometry

Lensless X-ray imaging techniques such as coherent diffraction imaging and ptychography, and Fourier transform holography can provide time-resolved, diffraction-limited images. Nearly all examples of these techniques have focused on transmission geometry, restricting the samples and reciprocal spaces that can be investigated. We report a lensless X-ray technique developed for imaging in Bragg and small-angle scattering geometries, which may also find application in transmission geometries. We demonstrate this by imaging a nanofabricated pseudorandom binary structure in small-angle reflection geometry. The technique can be used with extended objects, places no restriction on sample size, and requires no additional sample masking. The realization of X-ray lensless imaging in reflection geometry opens up the possibility of single-shot imaging of surfaces in thin films, buried interfaces in magnetic multilayers, organic photovoltaic and field-effect transistor devices, or Bragg planes in a single crystal.

36 MATERIALS SCIENCE↗

"Non-Reflective" Boundary Design via Remote Sensing and PID Control Valve

This paper develops the concept of a nonreflective (or semireflective) boundary condition using the combination of a remote sensor and a control system to modulate a relief valve. The essential idea is to sense the pressure change at a remote location and then to use the measured data to adjust the opening of an active control valve at the end of the line to eliminate or attenuate the wave reflections at the valve, thus controlling system transient pressures. This novel idea is shown here through numerical simulation to have considerable potential for transient protection. Using this model, wave reflections and resonance can be effectively eliminated for frictionless pipelines or initial no-flow conditions and can be better controlled in more realistic pipelines for a range of transient disturbances. In addition, the features of even-order harmonics and nonreflective boundary conditions during steady oscillation, obtained through time domain transient analysis, are verified by hydraulic impedance analysis in the frequency domain.

42 ENGINEERING↗

Apparatus to study crystal channeling and volume reflection phenomena at the SPS H8 beamline

A high performance apparatus has been designed and built by the H8-RD22 collaboration for the study of channeling and volume reflection phenomena in the interaction of 400 GeV/c protons with bent silicon crystals, during the 2006 data taking in the external beamline H8 of the CERN SPS. High-quality silicon short crystals were bent by either anticlastic or quasimosaic effects. Alignment with the highly parallel (8 {mu}rad divergence) proton beam was guaranteed through a submicroradian goniometric system equipped with both rotational and translational stages. Particle tracking was possible by a series of silicon microstrip detectors with high-resolution and a parallel plate gas chamber, triggered by various scintillating detectors located along the beamline. Experimental observation of volume reflection with 400 GeV/c protons proved true with a deflection angle of (10.4{+-}0.5) {mu}rad with respect to the unperturbed beam, with a silicon crystal whose (111) planes were parallel to the beam.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Synthesis of Arbitrary Unitary Transformations in Quantum Systems by Householder Reflections

We demonstrate that Householder reflections emerge naturally in the propagator of a coherently driven degenerate two-level system. Such reflections are a very powerful tool for constructing arbitrary unitary transformations of an N-state quantum system. We present examples for construction of discrete Fourier transforms, superposition-to-superposition navigation between pure states, engineering of arbitrary mixed states, and entanglement of trapped ions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reflection positivity and monotonicity

We prove general reflection positivity results on Riemannian manifolds for both scalar fields and Dirac fields, and comment on applications to quantum field theory. As another application, we prove the inequality C{sub D}{<=}C{sub N} between Dirichlet and Neumann covariance operators on a manifold with a reflection.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum Reflection of S-wave Unstable States

The phase time in quantum tunneling can be disentangled into a dwell time plus a term arising due to the interference of the reflected and incident waves in front of the barrier. The interference term dominates at low energies and as E{yields}0, this term and hence the phase time becomes singular. With the s-wave motion in three dimensions being equivalent to that of a one-dimensional motion in the radial coordinate, a similar singularity shows up in the phase time delay of s-wave resonances. Relating the scattering matrix in three dimensional collisions to the reflection amplitude, the interference term in tunneling can be identified as a term given in terms of the transition matrix in scattering. Subtraction of this term from the phase time delay gives the dwell time delay which is finite at all energies and is useful in characterizing s-wave resonances such as the {sigma} meson and mesic nuclei near threshold.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Study of Laser Reflectivity on Skin

The response to the light on the skin can be manifested as temperature increase or creation of biochemical byproducts, in which further studies are required to asset the light effect. This response changes the average response over time and can produce discrepancies between similar studies. In this work we present a Low Level Laser Therapy (LLLT) study with feedback. We study the time response reflectivity of a 980 nm laser diode of 25 mW modulated at frequencies close to 40 kHz and detect the reflected light on a silicon photodiode, finding no direct correlation between different test points or individuals, while finding reproducible responses within the same individual and test point.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Real time analysis of self-assembled InAs/GaAs quantum dot growth by probing reflection high-energy electron diffraction chevron image

Self-assembling process of InAs/GaAs quantum dots has been investigated by analyzing reflection high-energy electron diffraction chevron images reflecting the crystal facet structure surrounding the island. The chevron image shows dramatic changes during the island formation. From the temporal evolution of the chevron tail structure, the self-assembling process has been found to consist of four steps. The initial islands do not show distinct facet structures. Then, the island surface is covered by high-index facets, and this is followed by the formation of stable low-index facets. Finally, the flow of In atoms from the islands occurs, which contributes to flatten the wetting layer. Furthermore, we have investigated the island shape evolution during the GaAs capping layer growth by using the same real-time analysis technique.

36 MATERIALS SCIENCE↗

Elimination of total internal reflection in GaInN light-emitting diodes by graded-refractive-index micropillars

A method for enhancing the light-extraction efficiency of GaInN light-emitting diodes (LEDs) by complete elimination of total internal reflection is reported. Analytical calculations show that GaInN LEDs with multilayer graded-refractive-index pillars, in which the thickness and refractive index of each layer are optimized, have no total internal reflection. This results in a remarkable improvement in light-extraction efficiency. GaInN LEDs with five-layer graded-refractive-index pillars, fabricated by cosputtering TiO{sub 2} and SiO{sub 2}, show a light-output power enhanced by 73% and a strong side emission, consistent with analytical calculations and ray-tracing simulations.

36 MATERIALS SCIENCE↗

Charged particle reflection from an artificially structured boundary that produces a spatially periodic magnetostatic field

Charged particle reflection away from an artificially structured boundary is studied by computer simulation. The artificially structured boundary produces a spatially periodic static magnetic field such that the spatial period of the field is much smaller than the dimensions of a source of incident charged particles. A planar artificially structured boundary comprised of a sequence of parallel wires is considered. The wires carry currents in alternating directions and produce the magnetic field. A classical trajectory Monte Carlo study is reported. The motion of charged particles that approach the artificially structured boundary at small or grazing angles of incidence transverse to the wires is simulated. The conditions under which the charged particles reflect away from the boundary without reaching it are determined, and the results are fit to obtain analytical expressions. The results are not dependent on the sign of charge of the incident particles.

43 PARTICLE ACCELERATORS↗

Effects of rf magnetic field and wave reflection on multipactor discharge on a dielectric

This paper analyzes the effects of the rf magnetic field and partial reflection of the circularly polarized electromagnetic wave on multipactor discharge on a dielectric. A statistical theory (taking into account the velocity spread of injected electrons) is constructed to evaluate the multipactor induced breakdown and saturation level. It is concluded that the spread of initial velocities considerably changes the condition for multipactor initiation in comparison with the dynamic approach. This effect is especially strong for the case of relatively low rf electric field amplitude (when the transit time essentially exceeds the rf period) and leads to the oscillation suppression of effective electron yield and to an increase in the threshold of multipactor growth. It is established that the rf magnetic field eliminates the upper boundary of the susceptibility diagram, while the low boundary almost remains unchanged. It is also found that the presence of partial reflection causes degradation of the saturation level (in comparison with the nonreflecting case) and results in decreasing of the characteristic time required to achieve the steady state.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Note: Rigid holder to host and bend a crystal for multiple volume reflection of a particle beam

A holder to lodge and bend a silicon crystal to excite multivolume reflection of a high-energy particle beam has been designed and fabricated. A mechanically robust and stable structure fastens a crystal at best condition for experiments. The holder has allowed the observation of 12-time repeated volume reflection with very high efficiency. We detail the most important features behind the construction of the holder together with the characterization of the crystal being bent by the holder.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Polarized Infrared Reflectance Studies of Quaternary In{sub 0.04}Al{sub 0.06}Ga{sub 0.90}N

Group III-nitride has re-gained considerable interest recently as wide direct band gap semiconductor materials for opto-electronic and high power devices. The quaternary InAlGaN have great flexibility in tailoring their band gap profile while maintaining their lattice-matching and structural integrity. In this study, we report for the first time the polarized infrared (IR) reflectance studies of quaternary In{sub 0.04}Al{sub 0.06}Ga{sub 0.90}N by using Fourier transform infrared spectroscopy of Perkin-Elmer. The quaternary In{sub 0.04}Al{sub 0.06}Ga{sub 0.90}N epilayers was grown on sapphire by molecular beam epitaxy. The polarized IR reflectance spectra obtained at incident angle of 15 deg. were then compared with modeling spectrum of damped harmonic oscillator. Through this study, the transverse and longitudinal optical phonon modes of quaternary In{sub 0.04}Al{sub 0.06}Ga{sub 0.90}N epilayers were obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superresolution confocal technology for displacement measurements based on total internal reflection

In order to achieve a higher axial resolution for displacement measurement, a novel method is proposed based on total internal reflection filter and confocal microscope principle. A theoretical analysis of the basic measurement principles is presented. The analysis reveals that the proposed confocal detection scheme is effective in enhancing the resolution of nonlinearity of the reflectance curve greatly. In addition, a simple prototype system has been developed based on the theoretical analysis and a series of experiments have been performed under laboratory conditions to verify the system feasibility, accuracy, and stability. The experimental results demonstrate that the axial resolution in displacement measurements is better than 1 nm in a range of 200 nm which is threefold better than that can be achieved using the plane reflector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗