Search NASA⌕ Search

SEARCH · Search NASA

Results for “simulation evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Evaluation of idealized large-eddy simulations performed with the Weather Research and Forecasting model using turbulence measurements from a 250 m meteorological mast

Abstract. We investigate the ability of the Weather Research and Forecasting model to perform large-eddy simulation of canonical flows. This is achieved through comparison of the simulation outputs with measurements from sonic anemometers on a 250 m meteorological mast located at Østerild, in northern Denmark. Østerild is on a flat and rough area, and for the predominant wind directions, the atmospheric flow can be considered to be close to homogeneous. The idealized simulated flows aim at representing atmospheric boundary layer turbulence under unstable, neutral, and stable stability conditions at the surface, which are statistically significant conditions observed at Østerild. We found that the resolved fields from the simulations appear to have the characteristics of the three stability regimes. Vertical profiles of observed mean wind speeds and direction are well reproduced by the simulations, with the largest differences under near-neutral conditions, where the effect of the subgrid-scale model is evident on the vertical wind shear close to the surface. Vertical profiles of observed eddy fluxes are also well reproduced by the simulations, with the largest differences for the three velocity component variances under stable stability conditions, although nearly always within the observed variability. With regards to turbulent kinetic energy, we find good agreement between observations and simulations at all vertical levels. Simulated and observed velocity spectra match very well and show very similar behavior with height and with atmospheric stability within the low-frequency interval; at the effective resolution, the simulated spectra show the typical drop-off of finite differences. Our findings demonstrate that these idealized simulations reproduce the characteristics of atmospheric stability regimes often observed at a high turbulent and flat site within a direction sector, where the air flows over nearly homogeneous land.

17 WIND ENERGY↗
NASA NTRS1965

Evaluation of materials in entry heating simulation

The effects of several environmental parameters on the behavior of ablation materials have been examined. Practically all the entry heating parameters such as enthalpy, pressure, heating rate, aerodynamic shear, and so forth, affect material performance. However, the significance of the effects depends to a large extent upon the type of material. Inasmuch as it is rarely possible to simulate several environment effects simultaneously, the primary inputs must be determined and the test simulation must account for the effects of these inputs. The particular materials of concern must be characterized by test and analysis to determine which of the many environmental inputs are the most significant.

Simulation↗
NASA NTRS1973

Flat-plate collector performance evaluation. The case for a solar simulation approach

A method is proposed for determining the performance of flat-plate solar collector using a simulated sun. Collector test variables that will help establish the basis for the indoor test facility at the Lewis Research Center are discussed. The use of the indoor testing should permit a standard test for the convenient and accurate determination of collector performance. Preliminary test results are reported as an example of the type of collector performance data to be expected from the simulation approach.

Simon, F. F.↗
NASA NTRS1975

Ground idle performance improvement of a double-annular combustor by using simulated variable combustor geometry

A test program was undertaken to determine if variable combustor geometry could be used to reduce exhaust emissions of a low-pressure-ratio jet engine operating at ground idle conditions. Three techniques for varying combustor geometry were simulated. Other techniques evaluated were radial fuel staging and the use of preheated fuel. When simulated variable combustor geometry was employed with radial fuel staging, combustion efficiency at a fuel-air ratio of 0.01 was increased from 77 to 95 percent, and exhaust emissions of unburned hydrocarbons and carbon monoxide were significantly reduced.

Schultz, D. F.↗
NASA NTRS1977

Computer simulation incorporating a helicopter model for evaluation of aircraft avionics systems

A computer program was developed to integrate avionics research in navigation, guidance, controls, and displays with a realistic aircraft model. A user oriented program is described that allows a flexible combination of user supplied models to perform research in any avionics area. A preprocessor technique for selecting various models without significantly changing the memory storage is included. Also included are mathematical models for several avionics error models and for the CH-47 helicopter used in this program.

Ostroff, A. J.↗
NASA NTRS1978

Evaluation of LANDSAT MSS vs TM simulated data for distinguishing hydrothermal alteration

The LANDSAT Follow-On (LFO) data was simulated to demonstrate the mineral exploration capability of this system for segregating different types of hydrothermal alteration and to compare this capability with that of the existing LANDSAT system. Multispectral data were acquired for several test sites with the Bendix 24-channel MSDS scanner. Contrast enhancements, band ratioing, and principal component transformations were used to process the simulated LFO data for analysis. For Red Mountain, Arizona, the LFO data allowed identification of silicified areas, not identifiable with LANDSAT 1 and 2 data. The improved LFO resolution allowed detection of small silicic outcrops and of a narrow silicified dike. For Cuprite - Ralston, Nevada, the LFO spectral bands allowed discrimination of argillic and opalized altered areas; these could not be spectrally discriminated using LANDSAT 1 and 2 data. Addition of data from the 1.3- and 2.2- micrometer regions allowed better discriminations of hydrothermal alteration types.

Abrams, M. J.↗
NASA NTRS1979

Performance evaluation of telecommunication systems using computer simulation

The SYSTID time domain digital simulation technique is reviewed. A technique is illustrated which estimates the signal to noise ratio at a point in the simulation of a communication system. Signals having a lowpass or bandpass spectra are utilized. Simulation results show the technique to be accurate over a wide range of signal to noise ratios. Examples which illustrate application to both analog and digital communication systems are provided.

Tranter, W. H.↗
NASA NTRS1984

Laboratory evaluation of microwave absorption properties under simulated conditions for planetary atmospheres

The microwave absorbing properties of gaseous sulfuric acid (H2SO4) under Venus atmospheric conditions are investigated. The results are applied to measurements from Mariner 5, Mariner 10, and Pioneer/Venus Radio Occultation experiments, to determine abundancies of gaseous sulfuric acid in the Venus atmosphere. The microwave properties of the vapors accompanying liquid H2SO4 are studied to estimate the vapor pressure in an atmospheric model.

Steffes, P. G.↗
NASA NTRS1991

Hazard assessment and cockpit presentation issues for microburst alerting systems

Issues pertaining to the development of an alerting system for microbursts in the terminal area are studied. A methodology for evaluating microburst hazard criteria is developed on the basis of batch aircraft flight simulations. A preliminary evaluation of a selected set of hazard criteria is performed. The results indicate that the total headwind change along the aircraft flight path ('total divergence') does not correlate well with the approach degradation caused by microbursts. A preliminary piloted simulator study on cockpit presentation of wind shear alerts in verbal, alphanumeric, and graphical formats is performed. Graphical alerts were found to produce better decision-making and lower crew workload, and to be greatly preferred by pilots. Alphanumeric alerts were not well liked and exhibited no advantages over standard verbal radio communications.

Wanke, Craig↗
NASA NTRS1973

Evaluation of LRC Spectral Analyses of Simulated Gust Velocity Data

The NASA Langley Research Center (LRC) has been computing power spectra of simulated atmospheric turbulence data by various techniques, in preparation for the B-57 gust velocity data analysis program. The results of these studies have confirmed earlier suspicions that conventional first-difference pre-whitening of gust velocity data can produce serious distortions in the spectral densities at very low frequencies (below the frequency of the gust velocity spectral "knee"). The results also indicate that the frequency averaging procedures have certain merits over ensemble averaging procedures in the computation of spectra by direct Fourier transform operations. Finally, the results do not reveal any significant difference in the spectral estimates obtained using Hann versus Parzen smoothing procedures.

Piersol, Allan G.↗
NASA NTRS1998

Workstation-Based Simulation for Rapid Prototyping and Piloted Evaluation of Control System Designs

The development and optimization of flight control systems for modem fixed- and rotary-. wing aircraft consume a significant portion of the overall time and cost of aircraft development. Substantial savings can be achieved if the time required to develop and flight test the control system, and the cost, is reduced. To bring about such reductions, software tools such as Matlab/Simulink are being used to readily implement block diagrams and rapidly evaluate the expected responses of the completed system. Moreover, tools such as CONDUIT (CONtrol Designer's Unified InTerface) have been developed that enable the controls engineers to optimize their control laws and ensure that all the relevant quantitative criteria are satisfied, all within a fully interactive, user friendly, unified software environment.

Mansur, M. Hossein↗
NASA NTRS2003

Simulating the ARES Aircraft in the Mars Environment

NASA Langley proposed the Aerial Regional-scale Environmental Survey (ARES) of Mars science mission in response to the NASA Office of Space Science 2002 Mars Scout Opportunity. The science-driven mission proposal began with trade studies and determined that a rocket powered aircraft was the best suited platform to complete the ARES science objectives. A high fidelity six degree of freedom flight simulation was required to provide credible evidence that the aircraft design fulfilled mission objectives and to support the aircraft design process by providing performance evaluations. The aircraft was initially modeled using the aero, propulsion, and flight control system components of other aircraft models. As the proposed aircraft design evolved, the borrowed components were replaced with new models. This allowed performance evaluations to be performed as the design was maturing. Basic autopilot features were also developed for the ARES aircraft model. Altitude hold and track hold modes allowed different mission scenarios to be evaluated for both science merit and aircraft performance. Platform stability and data rate requirements were identified for each of the instruments and the aircraft performance was evaluated against those requirements. The results of the simulation evaluations indicate that the ARES design and mission profiles are sound and meet the science objectives.

Kenney, P. Sean↗
NASA NTRS2011

Evaluation of Arctic Sea Ice Thickness Simulated by AOMIP Models

We compare results from six AOMIP model simulations with estimates of sea ice thickness obtained from ICESat, moored and submarine-based upward looking sensors, airborne electromagnetic measurements and drill holes. Our goal is to find patterns of model performance to guide model improvement. The satellite data is pan-arctic from 2004-2008, ice-draft data is from moored instruments in Fram Strait, the Greenland Sea and the Beaufort Sea from 1992-2008 and from submarines from 1975-2000. The drill hole data are from the Laptev and East Siberian marginal seas from 1982-1986 and from coastal stations from 1998-2009. While there are important caveats when comparing modeled results with measurements from different platforms and time periods such as these, the models agree well with moored ULS data. In general, the AOMIP models underestimate the thickness of measured ice thicker than about 2 m and overestimate thickness of ice thinner than 2 m. The simulated results are poor over the fast ice and marginal seas of the Siberian shelves. Averaging over all observational data sets, the better correlations and smaller differences from observed thickness are from the ECCO2 and UW models.

Johnson, Mark↗