Search NASA⌕ Search

SEARCH · Search NASA

Results for “solution design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

“Age” Determination of Irradiated Materials Utilizing Inductively Coupled Plasma Mass Spectrometric (ICP-MS) Detection

A gas pressurized extraction chromatography (GPEC) system has been developed to perform elemental separations on radioactive samples to determine total and isotopic compositions of Cs and Ba from an irradiated salt sample, fuel sample and two sealed radiation sources. The separation is necessary to remove isobaric interferences in the determination of 137Cs, 135Cs, 137Ba, 135Ba, which are used to determine the age of a sample from radioactive decay or purification. The micro-column extraction chromatography system employs compressed nitrogen to move liquid through the system, compared to gravity or pumped liquids that are typically used for separations. The use of compressed gas allows for accurate and precise recovery of all liquids put into the chromatography system, enabling very accurate dilutions. The use of a small analytical column permits the use of very small amounts of liquids to be used. As a benefit, the amount of radiological waste that is generated in the separation process is minimized. For this work, a commercially available Sr-Resin™ was used to perform the separation for the above mentioned analytes. The column consists of a 7 inch piece of 1/16 in. O.D. x 0.030 in I.D. Teflon™ tubing having an internal volume of 81 µL. To this column, 49 mg of resin was added. The columns are re-usable after regeneration with 3 M HNO3. All samples were separated using batch collection, although real time analysis is possible with the current experimental design. A 1 % acetic acid solution was determined to be the best extractant for Ba. A flow rate of 0.1 mL/min was determined to be optimal for the separation of Ba. Complete recovery of the Cs and Ba was achieved, within the systematic error of the experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Significance of Strain in Formulation in Theory of Solid Mechanics

The basic theory of solid mechanics was deemed complete circa 1860 when St. Venant provided the strain formulation or the field compatibility condition. The strain formulation was incomplete. The missing portion has been formulated and identified as the boundary compatibility condition (BCC). The BCC, derived through a variational formulation, has been verified through integral theorem and solution of problems. The BCC, unlike the field counterpart, do not trivialize when expressed in displacements. Navier s method and the stiffness formulation have to account for the extra conditions especially at the inter-element boundaries in a finite element model. Completion of the strain formulation has led to the revival of the direct force calculation methods: the Integrated Force Method (IFM) and its dual (IFMD) for finite element analysis, and the completed Beltrami-Michell formulation (CBMF) in elasticity. The benefits from the new methods in elasticity, in finite element analysis, and in design optimization are discussed. Existing solutions and computer codes may have to be adjusted for the compliance of the new conditions. Complacency because the discipline is over a century old and computer codes have been developed for half a century can lead to stagnation of the discipline.

Patnaik, Surya N.↗

ARC-100 Reactor Security-by-Design Summary

This report applies the security-by-design methodology developed in a previous National Nuclear Security Administration–sponsored work to the Advanced Reactor Concepts 100 (ARC-100) sodium-cooled fast reactor (SFR) design. The report contains no proprietary information specific to the ARC 100 reactor. The insights developed in this report are high-level, and generally applicable to other sodium fast reactor designs. The information presented here is the result of a qualitative safety-based analysis and would not inform any potential adversary beyond what would be found in a docketed safety analysis report. The scope of this present report covers ARC-100’s reactor core, used fuel storage, and used fuel assembly wash station. These systems are also compared to a generic SFR design assumed in the previous study. The security assessment results show changes in structures, systems, and components (SSCs) safety importance relative to the generic SFR SSCs. However, the consequence assessment results are the similar to a previously assessed generic SFR. Several SSCs have higher importance rankings than others, and it is recommended that protection efforts are prioritized for these SSCs. This work will continue in the Fiscal Year 2025 for the remaining ARC-100 systems, including cesium trap, sodium cold trap, noble gas decay tanks (dewar bottles), and used fuel dry storage facility, to provide safety-and-security-by-design insights and recommendations on non-core systems. Results from this work will furnish a technical justification for the feasibility of these solutions for the ARC reactor's design and, where applicable, identify any regulatory benefits conferred by the proactive design aspect within a risk management framework. This initiative will contribute to a more secure design of the ARC reactor and support its licensing process.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Guided Formation of 3D Helical Mesostructures by Mechanical Buckling: Analytical Modeling and Experimental Validation

3D helical mesostructures are attractive for applications in a broad range of microsystem technologies due to their mechanical and electromagnetic properties as stretchable interconnects, radio frequency antennas, and others. Controlled compressive buckling of 2D serpentine-shaped ribbons provides a strategy to formation of such structures in wide ranging classes of materials (from soft polymers to brittle inorganic semiconductors) and length scales (from nanometer to centimeter), with an ability for automated, parallel assembly over large areas. The underlying relations between the helical configurations and fabrication parameters require a relevant theory as the basis of design for practical applications. In this work, an analytic model of compressive buckling in serpentine microstructures is presented based on the minimization of total strain energy that results from various forms of spatially dependent deformations. Experiments at micro- and millimeter scales, together with finite element analyses, have been exploited to examine the validity of developed model. The theoretical analyses shed light on general scaling laws in terms of three groups of fabrication parameters (related to loading, material, and 2D geometry), including a negligible effect of material parameters and a square root dependence of primary displacements on the compressive strain. Furthermore, analytic solutions were obtained for the key physical quantities (e.g., displacement, curvature and maximum strain). A demonstrative example illustrates how to leverage the analytic solutions in choosing the various design parameters, such that brittle fracture or plastic yield can be avoided in the assembly process.

36 MATERIALS SCIENCE↗

Direction-optimizing Label Propagation Framework for Structure Detection in Graphs: Design, Implementation, and Experimental Analysis

Label Propagation is not only a well-known machine learning algorithm for classification but also an effective method for discovering communities and connected components in networks. We propose a new Direction-optimizing Label Propagation Algorithm (DOLPA) framework that enhances the performance of the standard Label Propagation Algorithm (LPA), increases its scalability, and extends its versatility and application scope. As a central feature, the DOLPA framework relies on the use of frontiers and alternates between label push and label pull operations to attain high performance. It is formulated in such a way that the same basic algorithm can be used for finding communities or connected components in graphs by only changing the objective function used. Additionally, DOLPA has parameters for tuning the processing order of vertices in a graph to reduce the number of edges visited and improve the quality of solution obtained. We present the design and implementation of the enhanced algorithm as well as our shared-memory parallelization of it using OpenMP. We also present an extensive experimental evaluation of our implementations using the LFR benchmark and real-world networks drawn from various domains. Compared with an implementation of LPA for community detection available in a widely used network analysis software, we achieve at most five times the F-Score while maintaining similar runtime for graphs with overlapping communities. We also compare DOLPA against an implementation of the Louvain method for community detection using the same LFR-graphs and show that DOLPA achieves about three times the F-Score at just 10% of the runtime. For connected component decomposition, our algorithm achieves orders of magnitude speedups over the basic LP-based algorithm on large-diameter graphs, up to 13.2× speedup over the Shiloach-Vishkin algorithm, and up to 1.6× speedup over Afforest on an Intel Xeon processor using 40 threads.

97 MATHEMATICS AND COMPUTING↗

Human Factors Research for Space Exploration: Measurement, Modeling, and Mitigation

As part of NASA's Human Research Program, the Space Human Factors Engineering Project serves as the bridge between Human Factors research and Human Spaceflight applications. Our goal is to be responsive to the operational community while addressing issues at a sufficient level of abstraction to ensure that our tools and solutions generalize beyond the point design. In this panel, representatives from four of our research domains will discuss the challenges they face in solving current problems while also enabling future capabilities. Historically, engineering-dominated organizations have tended to view good Human Factors (HF) as a desire rather than a requirement in system design and development. Our field has made significant gains in the past decade, however; the Department of Defense, for example, now recognizes Human-System Integration (HSI), of which HF is a component, as an integral part of their divisions hardware acquisition processes. And our own agency was far more accepting of HF/HSI requirements during the most recent vehicle systems definition than in any prior cycle. Nonetheless, HF subject matter experts at NASA often find themselves in catch up mode... coping with legacy systems (hardware and software) and procedures that were designed with little regard for the human element, and too often with an attitude of we can deal with any operator issues during training. Our challenge, then, is to segregate the true knowledge gaps in Space Human Factors from the prior failures to incorporate best (or even good) HF design principles. Further, we strive to extract the overarching core HF issues from the point-design-specific concerns that capture the operators (and managers) attention. Generally, our approach embraces a 3M approach to Human Factors: Measurement, Modeling, and Mitigation. Our first step is to measure human performance, to move from subjective anecdotes to objective, quantified data. Next we model the phenomenon, using appropriate methods in our field, modifying them to suit the unique aspects of the space environment. Finally, we develop technologies, tools, and procedures to mitigate the decrements in human performance and capabilities that occur in space environments. When successful, we decrease risks to crew safety and to mission success. When extremely successful (or lucky), we devise generalizable solutions that advance the state of our practice. Our panel is composed of researchers from diverse domains of our project... from different boxes, if you will, of the Human Factors Analysis and Classification System (HFACS).

Kaiser, Mary K.↗

Broadband Via-Less Microwave Crossover Using Microstrip-CPW Transitions

The front-to-back interface between microstrip and CPW (coplanar waveguide) typically requires complex fabrication or has high radiation loss. The microwave crossover typically requires a complex fabrication step. The prior art in microstrip-CPW transition requires a physical vias connection between the microstrip and CPW line on a separate layer. The via-less version of this transition was designed empirically and does not have a close form solution. The prior art of the micro wave crossover requires either additional substrate or wire bond as an air bridge to isolate two microwave lines at the crossing junction. The disadvantages are high radiation loss, no analytical solution to the problem, lengthy simulation time, and complex fabrication procedures to generate air bridges or via. The disadvantage of the prior crossover is a complex fabrication procedure, which also affects the device reliability and yield. This microstrip-CPW transition is visualized as two microstrip-slotline transitions combined in a way that the radiation from two slotlines cancels each other out. The invention is designed based on analytical methods; thus, it significantly reduces the development time. The crossover requires no extra layer to cross two microwave signals and has low radiation loss. The invention is simple to fabricate and design. It produces low radiation loss and can be designed with low insertion loss, with some tradeoff with signal isolation. The microstrip-CPW transition is used as an interface to connect between the device and the circuit outside the package. The via-less microwave crossover is used to allow two signals to cross without using an extra layer or fabrication processing step to enable this function. This design allows the solution to be determined entirely though analytical techniques. In addition, a planar via-less microwave crossover using this technique was proposed. The experimental results show that the proposed crossover at 5 GHz has a minimum isolation of 32 dB. It also has low in-band insertion loss and return loss of 1.2 dB and 18 dB, respectively, over more than 44 percent of bandwidth at room temperature. This microstrip-CPW transition requires the microstrip line to be split into two sections. Each section is connected to a microstrip quarter-wavelength openended stub. A slotline is also placed perpendicular to the microstrip section. The slot is connected to a grounded-end quarter-wavelength slotline and generates a microstrip-slotline transition. When two of these sections are placed in parallel and with the microstrip section combined at transition, a microstrip- CPW transition is formed. The slotline radiation is suppressed as two slots are excited with the electric field in an opposite direction, which cancels the radiation in far field. The invention on the crossover consists of the invented microstrip-CPW transitions combined back-to-back and a microstrip low-pass filter. One signal is crossed through to the microstrip layer, while the other signal is crossed through the CPW line located on the ground plane of the microstrip line. The microstrip low-pass filter produces a narrow line at the crossing point to enhance the system isolation. It also produces broadband response in the operating frequency band. The microstrip-CPW transition allows a microwave signal to travel from microstrip line to CPW line with low radiation loss. The crossover allows two microwave signals to cross with minimal parasitic coupling.

Stevenson, Thomas↗

Bearing design - Historical aspects, present technology and future problems; Proceedings of the International Conference, San Francisco, CA, August 18-21, 1980

The considered investigations deal with some of the more important present day and future bearing requirements, and design methodologies available for coping with them. Solutions to many forthcoming bearing problems lie in the utilization of the most advanced materials, design methods, and lubrication techniques. Attention is given to materials for rolling element bearings, numerical analysis techniques and design methodology for rolling element bearing load support systems, lubrication of rolling element bearings, journal bearing design for high speed turbomachinery, design and energy losses in the case of turbulent flow bearings, and fluid film bearing response to dynamic loading.

Anderson, W. J.↗

Your First Stop for Clean Energy Policy Support [Fact Sheet]

The Clean Energy Solutions Center, an initiative of the Clean Energy Ministerial and UN-Energy, helps governments design and adopt policies and programs that support the deployment of transformational low-carbon technologies. The Solutions Center serves as a first-stop clearinghouse of clean energy policy reports, data, and tools and provides expert assistance and peer-to-peer learning forums. This factsheet highlights key Solutions Center offerings, including 'ask an expert' assistance on clean energy policy matters, training and peer learning, and technical resources for policy makers worldwide.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Structural optimization with dynamic behavior constraints

The minimum weight optimum design of damped linearly elastic structural systems subjected to periodic loading with behavior constraints on maximum deflections and side constraints on design variables is addressed. Attention is focused on the two major impediments to an optimal solution: (1) the time parametric nature of the behavior constraints; and (2) the severe nonconvexity of the design space. A solution method based on upper bound approximations for the behavior constraints and an innovative mathematical programming scheme for seeking the optimal frequency subspace is set forth. Numerical results for several test problems illustrate the effectiveness of the method reported.

Mills-Curran, W. C.↗

TPSAS-NF1676L-10751-DND

Developed in the late 1960's, the NASA Langley Research Center's 14-by-22-Foot Subsonic Tunnel was not originally conceived to test and evaluate the aeroacoustic characteristics of flight vehicles. However, sometime after the tunnel's inception, a need to do so developed. To facilitate acoustic measurements, a removable microphone traverse was designed and built. The implemented solution was functional yet time consuming to install and remove. Comprised of numerous interlocking parts, each installation of the system required three weeks of non-productive tunnel time, numerous personnel, and specialized equipment. A recently renewed focus on aeroacoustic testing brought about a desire to improve the operational efficiency of this type of testing in the 14-by 22-Foot Subsonic Tunnel. Specifically, a goal was established to reduce non-productive installation time from three weeks to just three shifts. In addition, no specialized equipment was to be required for installation and removal. Meeting these goals required the development of a new microphone traverse system. This presentation will provide details of the newly designed, built and commissioned traverse which meets the stated objectives.

Low speed wind tunnel↗

Design of super-strong and thermally stable nanotwinned Al alloys via solute synergy

Al alloys have widespread industrial applications. However, their mechanical strength is often much lower than steels. Here, we investigate the influence of solutes on achieving ultrahigh strength and thermal stability of nanotwinned Al alloys. In situ micropillar compression tests show the addition of a small amount of Ti can significantly increase the mechanical strength of Al–Ni alloys to 2 GPa. Deformation induced detwinning, Ni segregation and grain coarsening as discovered in binary Al–Ni alloys are mostly absent in the ternary Al–Ni–Ti alloys. Moreover, the ternary Al–Ni–Ti alloys have outstanding thermal stability. Density function theory calculations reveal the synergetic pinning effect of Ni–Ti solute pairs on incoherent twin boundaries. This study demonstrates that the proper selection of synergistic solute pairs is critical to improve the thermal stability and mechanical properties of nanotwinned Al alloys.

36 MATERIALS SCIENCE↗

Robust Optimal Experimental Design of Infinite-Dimensional Bayesian Nonlinear Inverse Problems

Abstract. We consider robust optimal experimental design (ROED) for nonlinear Bayesian inverse problems governed by partial differential equations (PDEs). An optimal design is one that maximizes some utility quantifying the quality of the solution of an inverse problem. However, the optimal design is dependent on elements of the inverse problem such as the simulation model, the prior, or the measurement error model. ROED aims to produce an optimal design that is aware of the additional uncertainties encoded in the inverse problem and remains optimal even after variations in them. We follow a worst-case scenario approach to develop a new framework for robust optimal design of nonlinear Bayesian inverse problems. The proposed framework (a) is scalable and designed for infinite-dimensional Bayesian nonlinear inverse problems constrained by PDEs; (b) develops efficient approximations of the utility, namely the expected information gain; (c) employs eigenvalue sensitivity techniques to develop analytical forms and efficient evaluation methods of the gradient of the utility with respect to the uncertainties against which we wish to be robust; and (d) employs a probabilistic optimization paradigm that properly defines and efficiently solves the resulting combinatorial max-min optimization problem. The effectiveness of the proposed approach is illustrated for optimal sensor placement problem in an inverse problem governed by an elliptic PDE.

Chowdhary, Abhijit↗

Radiological Handling and Containment Considerations in Support of an American Medical Isotope Producer

This work will discuss evaluation and design of new and modified facility level radiological containment, transfer, and handling systems in support of the United States’ American Medical Isotope Production Act. In the United States alone, Molybdenum-99 (Mo-99) is used as a precursor to locally generate its decay product, technetium-99m (Tc-99m), for use in approximately 40,000 medical procedures every day to detect cancer and heart disease. Currently, however, Mo-99 is primarily produced overseas and typically requires highly enriched uranium (HEU) which is classified as weapon -usable. This poses a serious security risk to the United States and, in 2012, Congress passed the American Medical Isotope ACT which aimed to cease all Mo-99 production that requires HEU and support American based companies who have found safer production methods. Through this effort, a system was designed and developed to access irradiated material in processing hot cells for ease of material introduction and removal in the confined area. The proposed solution uses a double-door design that allows for easy access to material while also providing shielding through a mechanically manipulated carousel. A system was also designed to transport irradiated materials from target reactors to a target receipt box using a rail guide system, pneumatic motor, and lead screw drive.

07 ISOTOPE AND RADIATION SOURCES↗

Selecting a near-optimal design for multiple criteria with improved robustness to different user priorities

In a decision-making process, relying on only one objective can often lead to oversimplified decisions that ignore important considerations. Incorporating multiple, and likely competing, objectives is critical for balancing trade-offs on different aspects of performance. When multiple objectives are considered, it is often hard to make a precise decision on how to weight the different objectives when combining their performance for ranking and selecting designs. We show that there are situations when selecting a design with near-optimality for a broad range of weight combinations of the criteria is a better test selection strategy compared with choosing a design that is strictly optimal under very restricted conditions. Here, we propose a new design selection strategy that identifies several top-ranked solutions across broad weight combinations using layered Pareto fronts and then selects the final design that offers the best robustness to different user priorities. This method involves identifying multiple leading solutions based on the primary objectives and comparing the alternatives using secondary objectives to make the final decision. We focus on the selection of screening designs because they are widely used both in industrial research, development, and operational testing. The method is illustrated with an example of selecting a single design from a catalog of designs of a fixed size. However, the method can be adapted to more general designed experiment selection problems that involve searching through a large design space.

97 MATHEMATICS AND COMPUTING↗

Influence of Process-Induced Anisotropy and Synovial Environment on Wear of EBM Built Ti6Al4V Joint Implants

Additive manufacturing (AM) technology is identified as an ideal solution to overcome challenges in design and manufacturing of complex components. However, the layered fashion of AM process result in directionally solidified microstructures on the system. The anisotropic surface texture will affect wear and corrosion resistance. The current study investigates tribological responses of AM-made Ti6Al4V for joint implant applications during the combined effect from synovial lubrication and process-induced surface structure on surface fatigue damage response. Electron beam melting was used to produce Ti6Al4V specimens and mechanical characterizations were performed using nanoindentation and micro bending tests to determine their mechanical properties. A series of pin-on-disk wear tests were performed to quantify sliding contact fatigue damage in three simulated synovial fluids with variable concentrations of bovine serum albumin and hyaluronic acid in the PBS solution. Physical properties of simulated synovial fluids were measured using a nanoindenter-based technique and correlated to fatigue wear response. The lower wear rate is found in greater protein concentrations. The results presented AM build direction significantly affects sliding fatigue wear resistance on TI6Al4V surface in all synovial environments.

36 MATERIALS SCIENCE↗

A constrained, total-variation minimization algorithm for low-intensity x-ray CT

Purpose: The authors developed an iterative image-reconstruction algorithm for application to low-intensity computed tomography projection data, which is based on constrained, total-variation (TV) minimization. The algorithm design focuses on recovering structure on length scales comparable to a detector bin width. Methods: Recovering the resolution on the scale of a detector bin requires that pixel size be much smaller than the bin width. The resulting image array contains many more pixels than data, and this undersampling is overcome with a combination of Fourier upsampling of each projection and the use of constrained, TV minimization, as suggested by compressive sensing. The presented pseudocode for solving constrained, TV minimization is designed to yield an accurate solution to this optimization problem within 100 iterations. Results: The proposed image-reconstruction algorithm is applied to a low-intensity scan of a rabbit with a thin wire to test the resolution. The proposed algorithm is compared to filtered backprojection (FBP). Conclusions: The algorithm may have some advantage over FBP in that the resulting noise level is lowered at equivalent contrast levels of the wire.

62 RADIOLOGY AND NUCLEAR MEDICINE↗