Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2011

Growth of Ordered Ultrathin Tungsten Oxide Films on Pt(111)

Ordered tungsten oxide ultra-thin films were prepared on a Pt(111) substrate at 700 K via direct sublimation of monodispersed cyclic (WO3)3 trimers. The surface composition, structure and morphology were determined using a combination of atomically resolved imaging, ensemble-averaged surface-sensitive spectroscopies, and density functional theory (DFT). We find that half of the (WO3)3 tungsten atoms get partially reduced to the (5+) oxidation state in the first layer at the Pt(111) interface. The opening of the (WO3)3 ring leads to the formation of a tungsten oxide layer with a zig-zag chain structure with a c(4×2) periodicity. In the second layer, the (WO3)3 clusters remain intact and form an ordered (3×3) array of molecularly-bound (WO3)3. DFT calculations provide a detailed understanding of the structure, oxidation states, and the vibrational frequencies for both the c(4×2) and (3×3) overlayers.

(WO3)(3) CLUSTERS↗
DOE OSTI2019

Operando Observations and First-Principles Calculations of Reduced Lithium Insertion in Au-Coated LiMn 2 O 4

The deposition of protective coatings on the spinel LiMn 2 O 4 (LMO) lithium–ion battery cathode is effective in reducing Mn dissolution from the electrode surface. Although protective coatings positively affect LMO cycle life, much remains to be understood regarding the interface formed between these coatings and LMO. Using operando powder X–ray diffraction with Rietveld refinement, it is shown that, in comparison to bare LMO, the lattice parameter of a model Au–coated LMO cathode is significantly reduced upon relithiation. Less charge passes through Au–coated LMO in comparison to bare LMO, suggesting that the reduced lattice parameter is associated with decreased Li + solubility in the Au–coated LMO. Density functional theory calculations show that a more Li + –deficient near–surface is thermodynamically favorable in the presence of the Au coating, which may further stabilize these cathodes through suppressing formation of the Jahn–Teller distorted Li 2 Mn 2 O 4 phase at the surface. Electronic structure and chemical bonding analyses show enhanced hybridization between Au and LMO for delithiated surfaces leading to partial oxidation of Au upon delithiation. Furthermore, this study suggests that, in addition to transition metal dissolution from electrode surfaces, protective coating design must also balance potential energy effects induced by charge transfer at the electrode–coating interface.

25 ENERGY STORAGE↗
DOE OSTI2012

Effect of oxygen on the stability of Ag islands on Si(111)-7 × 7

We have used scanning tunneling microscopy to probe the effect of oxygen exposure on an ensemble of Ag islands separated by a Ag wetting layer on Si(111)-7 × 7. Starting from a distribution dominated by islands that are 1 layer high (measured with respect to the wetting layer), coarsening in ultrahigh vacuum at room temperature leads to growth of 2-layer islands at the expense of 1-layer islands, which is expected. If the sample is exposed to oxygen, 3-layer islands are favored, which is unexpected. There is no evidence for oxygen adsorption on top of Ag islands, but there is clear evidence for adsorption in the wetting layer. Several possible explanations are considered.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Thermal treatment effects on charge storage performance of graphene-based materials for supercapacitors

Graphene materials were synthesized by reduction of exfoliated graphene oxide sheets by hydrazine hydrate and then thermally treated in nitrogen to improve the surface area and their electrochemical performance as electrical double-layer capacitor electrodes. The structural and surface properties of the prepared reduced graphite oxide (RGO) were investigated using atomic force microscopy, scanning electron microscopy, Raman spectra, X-ray diffraction, and nitrogen adsorption / desorption. RGO forms a continuous network of crumpled sheets, which consist of numerous few-layer and single-layer graphenes. Electrochemical studies were conducted by cyclic voltammetry, impedance spectroscopy, and galvanostatic charge-discharge measurements. The modified RGO materials showed enhanced electrochemical performance, with maximum specific capacitance of 96 F/g, energy density of 12.8 Wh/kg, and power density of 160 kW/kg. The results demonstrate that thermal treatment of RGO at selected conditions is a convenient and efficient method for improving specific capacitance, energy, and power density.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Topological material in the III–V family: Heteroepitaxial InBi on InAs

InBi ( 0 0 1 ) is formed epitaxially on InAs ( 1 1 1 ) -A by depositing Bi onto an In-rich surface. Angle-resolved photoemission measurements reveal topological electronic surface states, close to the M ¯ high symmetry point. This demonstrates a heteroepitaxial system entirely in the III–V family with topological electronic properties. InBi shows coexistence of Bi and In surface terminations, in contradiction with other III–V materials. For the Bi termination, the study gives a consistent physical picture of the topological surface electronic structure of InBi ( 0 0 1 ) terminated by a Bi bilayer rather than a surface formed by splitting to a Bi monolayer termination. Theoretical calculations based on relativistic density functional theory and the one-step model of photoemission clarify the relationship between the InBi ( 0 0 1 ) surface termination and the topological surface states, supporting a predominant role of the Bi bilayer termination. Furthermore, a tight-binding model based on this Bi bilayer termination with only Bi–Bi hopping terms, and no Bi–In interaction, gives a deeper insight into the spin texture. Published by the American Physical Society 2024

Nicolaï, Laurent (ORCID:0000000277312673)↗
DOE OSTI2015

Growth of SrVO{sub 3} thin films by hybrid molecular beam epitaxy

The authors report the growth of stoichiometric SrVO{sub 3} thin films on (LaAlO{sub 3}){sub 0.3}(Sr{sub 2}AlTaO{sub 6}){sub 0.7} (001) substrates using hybrid molecular beam epitaxy. This growth approach employs a conventional effusion cell to supply elemental A-site Sr and the metalorganic precursor vanadium oxytriisopropoxide (VTIP) to supply vanadium. Oxygen is supplied in its molecular form through a gas inlet. An optimal VTIP:Sr flux ratio has been identified using reflection high-energy electron-diffraction, x-ray diffraction, atomic force microscopy, and scanning transmission electron microscopy, demonstrating stoichiometric SrVO{sub 3} films with atomically flat surface morphology. Away from the optimal VTIP:Sr flux, characteristic changes in the crystalline structure and surface morphology of the films were found, enabling identification of the type of nonstoichiometry. For optimal VTIP:Sr flux ratios, high quality SrVO{sub 3} thin films were obtained with smallest deviation of the lattice parameter from the ideal value and with atomically smooth surfaces, indicative of the good cation stoichiometry achieved by this growth technique.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Atomic and electronic structure of the CdTe(111)B–(2√3 × 4) orthogonal surface

The atomic and electronic structure of four variants of Te-terminated CdTe(111)B–(2√3 × 4) orthogonal polar surface (ideal, relaxed, reconstructed, and reconstructed with subsequent relaxation) are calculated ab initio for the first time. The surface is modeled by a film composed of 12 atomic layers with a vacuum gap of ~16 Å in the layered superlattice approximation. To close Cd dangling bonds on the opposite side of the film, 24 fictitious hydrogen atoms with a charge of 1.5 electrons each are added. Ab initio calculations are performed using the Quantum Espresso program based on density functional theory. It is demonstrated that relaxation leads to splitting of the four upper layers. The band energy structures and total and layer-by-layer densities of electronic states for the four surface variants are calculated and analyzed.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Magnification Effects in Scanning Tunneling Microscopy: the Role of Surface Radicals

Scanning tunneling microscopy (STM) is a fundamental tool for determination of the surface atomic structure. However, the interpretation of high resolution microscopy images is not straightforward. In this paper we provide a physical insight on how STM images can suggest atomic locations which are distinctively different from the real ones. This effect should be taken into account when interpreting high-resolution STM images obtained on surfaces with directional bonds. It is shown that spurious images are formed in the presence of polarized surface radicals showing a pronounced angle with respect to the surface normal. This issue has been overlooked within the surface science community and often disregarded by experimentalists working with STM. Without loss of generality, we illustrate this effect by the magnification observed for pentamer-like structures on (110), (113), and (331) surfaces of silicon and germanium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2012

Surface and related bulk properties of titania nanoparticles recovered from aramid–titania hybrid films: A novel attempt

Highlights: ► Aramid–titania hybrid films (5 and 10 wt%-TiO{sub 2}) were prepared via sol–gel processing. ► 450 °C calcination of the films yield anatase-TiO{sub 2} nanoparticles of rod-like morphology. ► The titania nanoparticle, crystal structure, high surface area are stable up to 800 °C. ► The novel approach has the advantage of nearly 100% recovery of titania. ► Increasing calcination temperature up to 1100 °C triggers anatase → rutile transition. -- Abstract: 5 and 10 wt%-TiO{sub 2}-containing aramid–titania hybrid films were prepared using sol–gel processing improved by the inclusion of 3-isocyanato-propyltriethoxysilane (ICTOS) to strengthen bonding of the titania species to the polymer backbone and, hence, lessen its agglomeration. The films were thermally degraded by heating at 450 °C in a dynamic atmosphere of air. The solid residues were found by thermogravimetry, X-ray diffractometry and electron microscopy to consist dominantly of uniformly agglomerated rod-like anatase-TiO{sub 2} nanoparticles, irrespective of the titania content of the film. The recovered titania particle morphology and surface microstructure were examined by field emission scanning and high-resolution transmission electron microscopy, respectively. Whereas, the particle surface chemistry and texture were assessed, respectively, by means of X-ray photoelectron spectroscopy and N{sub 2} sorptiometry. The recovered titanias were found, irrespective of the film content of titania, to enjoy not only a high temperature (up to 800 °C) stable nanoscopic anatase bulk structure, but also a high-temperature stable surface chemical composition (lattice Ti{sup 4+} and O{sup 2−}, and adsorbed OH/CH{sub x} species), (101)-faceted microstructure and highly accessible (145–112 m{sup 2}/g), uniform mesoporous texture with average pore diameter in the narrow range of 3.9–6.3 nm. Increasing the calcination temperature up to 1100 °C enhances an anatase → rutile transition, the extent of which is larger the higher the titania content of the film.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Characterization of thin film deposits on tungsten filaments in catalytic chemical vapor deposition using 1,1-dimethylsilacyclobutane

Metal filament plays a key role in the technique of catalytic chemical vapor deposition (Cat-CVD) as it serves as a catalyst in dissociating the source gas to form reactive species. These reactive species initiate the gas-phase reaction chemistry and final thin film and nanostructure formation. At the same time, they also react with the metal itself, leading to the formation of metal alloys and other deposits. The deposits on the tungsten filaments when exposed to 1,1-dimethylsilacyclobutane (DMSCB), a single-source precursor for silicon carbide thin films, in the process of Cat-CVD were studied in this work. It has been demonstrated that a rich variety of deposits, including tungsten carbides (W{sub 2}C and WC), tungsten silicide (W{sub 5}Si{sub 3}), silicon carbide, amorphous carbon, and graphite, form on the W filament surfaces. The structural and morphological changes in the tungsten filaments depend strongly on the DMSCB pressure and filament temperature. At 1000 and 2000 °C, the formation of WC and W{sub 2}C dominates. In addition, a thin amorphous carbon layer has been found at 1500 °C with the 0.12 and 0.24 Torr of DMSCB and a lower temperature of 1200 °C with the 0.48 Torr of DMSCB. An increase in the DMSCB sample pressure gives rise to higher Si and C contents. As a result, the formation of SiC and W{sub 5}Si{sub 3} has been observed with the two high-pressure DMSCB samples (i.e., 0.24 and 0.48 Torr). The rich decomposition chemistry of DMSCB on the W surfaces is responsible for the extensive changes in the structure of the W filament, providing support for the close relationship between the gas-phase decomposition chemistry and the nature of alloy formation on the metal surface. The understanding of the structural changes obtained from this work will help guide the development of efficient methods to solve the filament aging problem in Cat-CVD and also to achieve a controllable deposition process.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Spin scattering and noncollinear spin structure-induced intrinsic anomalous Hall effect in antiferromagnetic topological insulator MnB i 2 T e 4

MnB i 2 T e 4 has recently been established as an intrinsic antiferromagnetic (AFM) topological insulator—an ideal platform to create quantum anomalous Hall insulator and axion insulator states. We performed comprehensive studies on the structure, nontrivial surface state, and magnetotransport properties of this material. Our results reveal an intrinsic anomalous Hall effect arising from a noncollinear spin structure for the magnetic field parallel to the c axis. We observed negative magnetoresistance under arbitrary field orientation below and above the Néel temperature (T N ) , providing clear evidence for strong spin fluctuation-driven spin scattering in both the AFM and paramagnetic states. Furthermore, we found that the nontrivial surface state opens a large gap (~85 meV) even far above TN. Our findings demonstrate that the bulk band structure of MnB i 2 T e 4 is strongly coupled with the magnetic property and that a net Berry curvature in momentum space can be created in the canted AFM state. In addition, our results imply that the gap opening in the surface states is intrinsic, likely caused by the strong spin fluctuations in this material.

Angle-resolved photoemission spectroscopy↗
DOE OSTI2022

Superior Metal‐Organic Framework Activation with Dimethyl Ether

Abstract Metal–organic frameworks (MOFs) are demonstrated to be readily activated by treatment with the low surface tension, low boiling point solvent dimethyl ether (DME). The mildness of the method enables access to high surface areas by avoiding structural changes in the framework that often plague thermal activation methods. A distinction from previous methods is that DME activation succeeds for materials with coordinatively unsaturated sites (CUS) and non‐CUS MOFs as well. DME displaces solvent molecules occupying the pores of the MOF as well as those coordinated to metal centers; reducing evacuation temperature by using a coordinating, yet highly volatile guest enables low temperature activation with structural retention as demonstrated surface area measurements that match or exceed existing activation protocols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2011

Doped LaFeO3 as SOFC Catalysts: Control of Oxygen Mobility Oxidation Activity

The bulk structure and surface properties of Fe-based perovskite-type oxides with the formula La{sub 0.6}Sr{sub 0.4}Co{sub y}Fe{sub 1-y}O{sub 3-{delta}} for y = 0.1, 0.2, and 0.3 have been investigated. The properties were found to strongly depend upon Co content, temperature, and environment. The materials were selected due to their potential use as solid oxide fuel cell cathodes. The intermediate Co loading formed oxygen vacancies most easily and several other properties including oxidation activity and surface sites showed a similar non-linear trend. Trends are related to a possible transition in electronic structure. Activity for oxidation of methane, oxygen storage and chemical compatibility was shown to be superior to that of the La{sub 0.6}Sr{sub 0.4}MnO{sub 3}.

03 NATURAL GAS↗
DOE OSTI2017

Laser Nitriding of the Newly Developed Ti-20Nb-13Zr at.% Biomaterial Alloy to Enhance Its Mechanical and Corrosion Properties in Simulated Body Fluid

Despite the widespread application of Ti alloy in the biomedical field, surface treatments are typically applied to improve its resistance to corrosion and wear. A newly developed biomedical Ti-20Nb-13Zr at.% alloy (TNZ) was laser-treated in nitrogen environment to improve its surface characteristics with corrosion protection performance. Surface modification of the alloy by laser was performed through a Nd:YAG laser. The structural and surface morphological alterations in the laser nitrided layer were investigated by XRD and a FE-SEM. The mechanical properties have been evaluated using nanoindentation for laser nitride and as-received samples. The corrosion protection behavior was estimated using electrochemical corrosion analysis in a physiological medium (SBF). The obtained results revealed the production of a dense and compact film of TiN fine grains (micro-/nanosize) with 9.1 µm below the surface. The mechanical assessment results indicated an improvement in the modulus of elasticity, hardness, and resistance of the formed TiN layer to plastic deformation. The electrochemical analysis exhibited that the surface protection performance of the laser nitrided TNZ substrates in the SBF could be considerably enhanced compared to that of the as-received alloy due to the presence of fine grains in the TiN layer resulting from laser nitriding. Furthermore, the untreated and treated Ti-20Nb-13Zr alloy exhibited higher corrosion resistance than the CpTi and Ti6Al4V commercial alloys. The improvements in the surface hardness and corrosion properties of Ti alloy in a simulated body obtained using laser nitriding make this approach a suitable candidate for enhancing the properties of biomaterials.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Surface reconstructions and modified surface states in L a 1 – x C a x Mn O 3

Here, the unique functionalities present at surfaces and interfaces of complex oxides have attracted intense research in the past decade. Yet, the fundamental mechanisms underpinning functionality are often elusive, especially in doped manganites, limiting their implementation in functional electronic devices such as memristors and spin valves. Here, we present a local probe-based study on mixed-terminated La 5/8 Ca 3/8 MnO 3 (LCMO) films, and reveal surface metallicity in a thin film grown by pulsed-laser deposition. Using first-principles density-functional theory calculations with Hubbard correction that are more accurate to capture effects of correlation in these systems, we show that for Ca-segregated (001) LCMO surfaces the (La,Ca)O-site terminated surfaces are half metallic due to delocalized Mn- d states populating the Fermi level, whereas the MnO 2 -site terminated surfaces exhibit a half-metallic or insulating character depending on the type of surface reconstruction. Computations not only explain the current measurements, but also explain other recent surface measurements on LCMO thin films, leading to a coherent picture of how the crucial link between surface segregation and Jahn-Teller couplings in the manganese oxides tune the surface electronic/magnetic structure, thereby pointing to the fine control of transport and magnetism at the conductive oxide surface independent of the bulk.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Study of charge transfer interaction modes in the mixed Donor-Acceptor cocrystals of pyrene derivatives and TCNQ: A combined structural, thermal, spectroscopic, and hirshfeld surfaces analysis

Highlights: • Three pyrene derivatives were synthesized as donors. • Co-crystallization of donor and acceptor resulted in mixed CT cocrystals. • The crystal structures and packing of the CT mixed assemblies are studied. • CT state has been affirmed by spectroscopic measurements. • The three cocrystals exhibited strong absorptions extend to near infrared. - Abstract: The role of charge-transfer (CT) interactions in the synthesis of charge-transfer (CT) complexes is of great significance, which has led to promising materials for a range of applications. Herein, we report the synthesis of three new binary mixed stack CT systems I, II, and III, grown by solvent evaporation technique involving, 1-(naphthalene-2-yl)− 3-(pyrene-1-yl)prop-2-en-1-one (NPPO), 3-(pyrene-1-yl)− 1-(thiophene-2-yl)prop-2-en-1-one (PTPO) and 2-phenyl-3-(pyrene-2-yl)acrylonitrile (PPA) as the donors and 7,7,8,8-tetracyanoquinodimethane (TCNQ) as an acceptor material. X-ray diffraction, thermal behavior, and spectroscopic analysis affirm the formation of CT complex and material purity. Based on the structural analysis the three CT complexes exhibit mixed stack arrangement (DAD-DAD) directed by the CT π–π interactions while the auxiliary hydrogen bonds (C-H-O, and C-H-N) stabilize and contribute to the overall packing of CT complexes. Remarkably, the complexes exhibit strong CT absorptions spreading to near infrared, making the crystals appear black. Not to mention, Hirshfeld surface analysis was employed to study the different intermolecular interactions and crystal packing in these materials. These results indicate that such a cocrystal design helps to explore new D-A systems, particularly with a mixed stack, that might have potential research values for applications in materials science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Asymmetric projections of the arcuate fasciculus to the temporal cortex underlie lateralized language function in the human brain

The arcuate fasciculus (AF) in the human brain has asymmetric structural properties. However, the topographic organization of the asymmetric AF projections to the cortex and its relevance to cortical function remain unclear. Here we mapped the posterior projections of the human AF in the inferior parietal and lateral temporal cortices using surface-based structural connectivity analysis based on diffusion MRI and investigated their hemispheric differences. We then performed the cross-modal comparison with functional connectivity based on resting-state functional MRI (fMRI) and task-related cortical activation based on fMRI using a semantic classification task of single words. Structural connectivity analysis showed that the left AF connecting to Broca's area predominantly projected in the lateral temporal cortex extending from the posterior superior temporal gyrus to the mid part of the superior temporal sulcus and the middle temporal gyrus, whereas the right AF connecting to the right homolog of Broca's area predominantly projected to the inferior parietal cortex extending from the mid part of the supramarginal gyrus to the anterior part of the angular gyrus. The left-lateralized projection regions of the AF in the left temporal cortex had asymmetric functional connectivity with Broca's area, indicating structure-function concordance through the AF. During the language task, left-lateralized cortical activation was observed. Among them, the brain responses in the temporal cortex and Broca's area that were connected through the left-lateralized AF pathway were specifically correlated across subjects. These results suggest that the human left AF, which structurally and functionally connects the mid temporal cortex and Broca's area in asymmetrical fashion, coordinates the cortical activity in these remote cortices during a semantic decision task. As a result, the unique feature of the left AF is discussed in the context of the human capacity for language.

59 BASIC BIOLOGICAL SCIENCES↗