Search NASA⌕ Search

SEARCH · Search NASA

Results for “wind data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

(abstract) Role of Long Equatorial Wave Reflection in the Low-Frequency Variability Observed During the TOPEX/POSEIDON Period: Data Analysis and Coupled Model Study

The analysis of TOPEX/POSEIDON sea level and ERS-1 zonal wind stress data gives evidence that first mode meridonal long Rossby waves fully reflected into Kelvin waves at the equatorial western Pacific boundary at different periods including the January-June 1994 period. The evolution of the conditions (zonal wind stress, sea surface temperature and sea level anomalies) in the central Pacific suggests that this reflection may have played a role in the reversal of cold to warm anomalies observed in the central Pacific in June-July 1994. To investigate the actual role of reflected Kelvin waves observed by TOPEX/POSEIDON, a simple ocean-atmosphere coupled model is designed. Starting from these initial conditions, several simulations are run for testing the role western bundary reflection evidenced in TOPEX/POSEIDON data. Coupled mechanisms are suggested to explain the low-frequency variability observed during this period.

Rossby waves Kelvin waves zonal wind stress TOPEX/↗

The radial evolution of the bulk properties of the solar wind

Simultaneous solar-wind proton data obtained at several heliocentric distances during radial alignments are compared. The radial variations associated with two high-speed streams in the solar wind are studied as examples of the radial evolution of the solar-wind speed distribution and of high-speed streams in the solar wind as observed in the ecliptic plane in 1973. Pioneer 11 data on high-speed streams in the solar wind observed at about 1.5 and 3.7 AU are compared with the corresponding high-speed-stream data obtained at earth. These analyses indicate that as these high-speed streams propagated to these extended heliocentric distances, there was an erosion of the highest speeds and a general narrowing of the speed distribution. These observations are consistent with the exchange of momentum in the solar wind between high-speed streams and low-speed streams as they propagate outward from the sun.

Intriligator, D. S.↗

Study of hybrid power system potential to power agricultural water pump in mountain area

As industry and Indonesian economy grow fast, there are a lot of agricultural land has changed into housing and industrial land. This causes the agricultural land moves to mountain area. In mountainous agricultural area, farmers use the water resources of small rivers in the groove of the mountain to irrigate the farmland. Farmers use their power to lift up water from the river to their land which causes inefectivity in the work of the farmers. Farmers who have capital utilize pump to raise water to their land. The only way to use pump in mountain area is by using fuel energy as there is no electricity, and the fuel price in mountain area is very expensive. Based on those reasons it is wise to consider the exploration of renewable energy available in the area such as solar energy, wind energy and hybrid energy. This study analyses the potential of the application of hybrid power plant, which is the combination of solar and wind energy, to power agricultural pump. In this research, the data of wind speed and solar radiation are collected from the measurement of BMKG SMPK Plus Sare. Related to the solar energy, the photovoltaic output power calculation is 193 W with duration of irradiation of 5 hours/day. While for the wind energy, the output power of the wind turbine is 459.84 W with blade diameter of 3 m and blow duration of 7 hours/day. The power of the pump is 558 W with 8 hours of usage, and the water capacity is 2.520 liters/hour for farmland with the area of 15 ha. Based on the analysis result, the designed system will generate electricity of 3.210 kW/year with initial investment of US$ 14,938.

17 WIND ENERGY↗

Entropy-Infused Deep Learning Loss Function for Capturing Extreme Values in Wind Power Forecasting

Extreme scenarios in wind power generation occur with higher frequency and larger magnitude in the recent years due to the ever-increasing extreme meteorological factors. Accurate forecasting of the occurrence of extreme values in wind power generation is of great concern to ensure reliable power system operation. Recently, deep learning models have surged in popularity for wind power forecasting, with the mean squared error (MSE) loss function being commonly used. However, the MSE loss function, being sensitive to extreme values, disproportionately penalizes larger errors, cannot adequately capture the extreme values present in wind energy data, and novel loss functions have seldom been tailored for wind power forecasting. To this end, in this paper, we introduce a novel loss function specifically crafted to capture extreme values in wind power forecasting. The experimental results with four fundamental deep learning methods on open source wind power dataset validate that the new loss function is efficient and superior in all cases compared to MSE in capturing extreme values while maintaining forecasting performance.

17 WIND ENERGY↗

An accumulation method for early fault warning and its application to wind turbine systems

Unexpected failures in engineering systems lead to expensive maintenance actions and should be avoided if at all possible. This is particularly true for wind turbine systems for which unexpected failures not only demand costly repairs but also cause long downtime. Motivated by this need, we present an accumulation method for fault early warning and failure anticipation. Here, our research shows that one critical element allowing the ability of early warning is to accumulate the small-magnitude symptoms resulting from gradual changes in an engineering system like wind turbines. Our idea is inspired by the classical cumulative sum method, or CUSUM, but we have to redesign the accumulation mechanism for tackling unique challenges in wind turbine data. The new accumulation method is applied to two real wind turbine datasets, one with gearbox failures and the other with generator failures, and demonstrates superior performance as compared with CUSUM.

17 WIND ENERGY↗

Wind shear modeling for aircraft hazard definition

Mathematical models of wind profiles were developed for use in fast time and manned flight simulation studies aimed at defining and eliminating these wind shear hazards. A set of wind profiles and associated wind shear characteristics for stable and neutral boundary layers, thunderstorms, and frontal winds potentially encounterable by aircraft in the terminal area are given. Engineering models of wind shear for direct hazard analysis are presented in mathematical formulae, graphs, tables, and computer lookup routines. The wind profile data utilized to establish the models are described as to location, how obtained, time of observation and number of data points up to 500 m. Recommendations, engineering interpretations and guidelines for use of the data are given and the range of applicability of the wind shear models is described.

Frost, W.↗

Data acquisition for measuring the wind on Venus from Pioneer Venus

The Pioneer Venus Differential Long Baseline Interferometry experiment was designed to measure the motion in three dimensions of the Pioneer probes during their fall to the surface of Venus, using a combination of Doppler and long baseline ratio interferometric methods. The altitude profiles of wind speed and direction that may be deduced from these data are expected to contribute significantly to the understanding of the dynamics of the Venus atmosphere. The design of the experiment and the equipment and software techniques that were developed specially for this experiment are described.

Smith, J. R.↗

Heating requirements and nonadiabatic surface effects for a model in the NTF cryogenic wind tunnel

A theoretical study has been made of the severity of nonadiabatic surface conditions arising from internal heat sources within a model in a cryogenic wind tunnel. Local surface heating is recognized as having an effect on the development of the boundary layer, which can introduce changes in the flow about the model and affect the wind tunnel data. The geometry was based on the NTF Pathfinder I wind tunnel model. A finite element heat transfer computer code was developed and used to compute the steady state temperature distribution within the body of the model, from which the surface temperature distribution was extracted. Particular three dimensional characteristics of the model were represented with various axisymmetric approximations of the geometry. This analysis identified regions on the surface of the model susceptible to surface heating and the magnitude of the respective surface temperatures. It was found that severe surface heating may occur in particular instances, but could be alleviated with adequate insulating material. The heat flux through the surface of the model was integrated to determine the net heat required to maintain the instrumentation cavity at the prescribed temperature. The influence of the nonadiabatic condition on boundary layer properties and on the validity of the wind tunnel simulation was also investigated.

Macha, J. M.↗

Some considerations on the integration of engine nacelles into low-boom aircraft concepts

A study of wind-tunnel data has shown why unexpected strong shock waves appeared in wind tunnel pressure signatures of two low-boom models, and has indicated that changes to the current methods for analyzing and designing low-boom aircraft are needed. The discussion provided corrections for the interface lift code, and suggested methods of treatment for the equivalent areas of the aircraft, especially the nacelles and the interference lift, which were to be used in the aircraft design and the sonic boom analysis.

Mack, Robert J.↗

Concentric Eyewall Asymmetries in Hurricane Gonzalo (2014) Observed by Airborne Radar

Two eyewall replacement cycles were observed in Hurricane Gonzalo by the NOAA P3 Tail (TA) radar and the recently developed NASA High-Altitude Imaging Wind and Rain Airborne Profiler (HIWRAP) radar. These observations captured detailed precipitation and kinematic features of Gonzalo's concentric eyewalls both before and after the outer eyewall's winds became the vortex maximum winds. The data were analyzed relative to the deep-layer environmental wind shear vector. During the beginning eyewall replacement cycle stages, the inner and outer eyewalls exhibited different asymmetries. The inner eyewall asymmetry exhibited significant low-level inflow, updrafts, and positive tangential acceleration in the downshear quadrants, consistent with observational and theoretical studies. The outer eyewall asymmetry exhibited these features in the left-of-shear quadrants, further downwind from those of the inner eyewall. It is suggested that the low-level inflow occurring at the outer but not at the inner eyewall in the downwind regions signals a barrier effect that contributes to the eventual decay of the inner eyewall. Toward the later eyewall replacement stages, the outer eyewall asymmetry shifts upwind, becoming more aligned with the asymmetry of the earlier inner eyewall. This upwind shift is consistent with the structural evolution of eyewall replacement as the outer eyewall transitions into the primary eyewall of the storm.

Didlake, Anthony C.↗

The Jörmungandr Dark Flight Model for Meteorite and Orbital Debris Recovery

Jörmungandr is a model that replicates the flight paths of falling meteorites to facilitate rapid meteorite collection [e.g. 1-3]. By iteratively entering a range of meteorite masses, a polygonal landing field (or “strewn field”) is generated to simplify any search for meteorites. Jörmungandr uses winds-aloft data collected by weather balloons to accurately replicate lateral movement of falling meteorites. Jörmungandr is recently upgraded to v.2 with slightly more accurate fall modelling than v.1, and the math and operations of the model are described here. Jörmungandr data show that strewn field shapes are dominated by local wind conditions which can produce banana-shaped strewn fields in the event of strong crosswinds.

M D Fries↗

Parameterization of Vertical Cloud Distribution from C3M and MERRA Data Using ML Method

Clouds play a key role in regulating the hydrological cycle and the Earth's radiative energy budget. However, global climate models (GCMs) with a horizontal grid spacing on the order of 100 km have limitations in representing sub-grid cloud dynamics with spatial scales on the order of 1 km, leading to potential uncertainties in cloud radiative feedback on the global scale. In our research, we will leverage the capabilities of Deep Machine Learning (DML) methods to construct parameterizations of sub-grid volumetric cloud fraction (VCF), which is the frequency of occurrence on a grid volume accumulated in the horizontal and vertical directions. Our investigation delves into the intricate relationship between VCF obtained from the NASA CALIPSO-CloudSat-CERES-MODIS (CCCM) satellite observation data and 3-D MERRA-2 reanalysis meteorological profiling data (e.g., wind, relative humidity, temperature). Through a comprehensive one-year data training utilizing the Sequence to Sequence DML method, we have successfully disentangled the complicated cloud formation dynamics across diverse meteorological conditions through a day-to-day analysis framework. Preliminary findings reveal promising statistical agreements in geographical and vertical distributions and seasonal variations of volumetric cloud fraction between ML prediction and satellite measurements. These results underscore the aptitude of our DML model to discern underlying cloud physical processes and accurately represent sub-grid cloud formation dynamics. Additionally, we have also employed trained neural network to analyze uncertainties arising from errors in meteorological data, further enhancing the robustness of our VCF parameterization.

Shan Zeng↗

Data Collection for Current U.S. Wind Energy Projects: Component Costs, Financing, Operations, and Maintenance (January 2011 - September 2011)

DNV Renewables (USA) Inc. (DNV) used an Operations and Maintenance (O&M) Cost Model to evaluate ten distinct cost scenarios encountered under variations in wind turbine component failure rates. The analysis considers 1) a Reference Scenario using the default part failure rates within the O&M Cost Model, 2) High Failure Rate Scenarios that increase the failure rates of three major components(blades, gearboxes, and generators) individually, 3) 100% Replacement Scenarios that model full replacement of these components over a 20 year operating life, and 4) Serial Failure Scenarios that model full replacement of blades, gearboxes, and generators in years 4 to 6 of the wind project. DNV selected these scenarios to represent a broad range of possible operational experiences. Also in thisreport, DNV summarizes the predominant financing arrangements used to develop wind energy projects over the past several years and provides summary data on various financial metrics describing those arrangements.

17 WIND ENERGY↗

Assimilation of SeaWinds Scatterometer Data in the GEOS Data Assimilation System

The first SeaWinds scatterometer was launched in to space aboard the Quikscat satellite on June 19, 1999 at 7:15 p.m. PDT. Flying in a near polar orbit 800 km above the earth's surface, SeaWinds uses an advanced scatterometer design to measure surface wind velocity over 90 percent of the ice free oceans ever 24 hours. This first SeaWinds mission is designed to replace the NASA Scatterometer (NSCAT) which ceased providing wind velocity data when the ADEOS I satellite failed. A second SeaWinds is scheduled to be launched late in 2000 aboard ADEOS II. Previous scatterometer assimilation experiments conducted by the NASA Data Assimilation Office, using both ERS and NSCAT wind observations, have demonstrated considerable potential for this type of data to improve both atmospheric analyses and forecasts, however much of the smaller scale information content of the scatterometer data could not be taken into account in the early coarse resolution versions of the Goddard (GEOS) Data Assimilation System (DAS) or in operational data assimilation systems. In this paper, we will describe data assimilation experiments in which the new higher resolution versions of the GOES DAS are used to assimilate SeaWinds scatterometer winds. Following a brief discussion of the SeaWinds design and the methodology used to assimilate scatterometer data in the GOES DAS, the quality of the SeaWinds data and the impact of SeaWinds on GOES analyses and forecasts at different resolutions will be presented.

Atlas, Robert↗

In-flight lift and drag measurements on a first generation jet transport equipped with winglets

A KC-135A aircraft equipped with wing tip winglets was flight tested to demonstrate and validate the potential performance gain of the winglet concept as predicted from analytical and wind tunnel data. Flight data were obtained at cruise conditions for Mach numbers of 0.70, 0.75, and 0.80 at a nominal altitude of 36,000 ft. and winglet configurations of 15 deg cant/-4 deg incidence, 0 deg cant/-4 deg incidence, and baseline. For the Mach numbers tested the data show that the addition of winglets did not affect the lifting characteristics of the wing. However, both winglet configurations showed a drag reduction over the baseline configuration, with the best winglet configuration being the 15 deg cant/-4 deg incidence configuration. This drag reduction due to winglets also increased with increasing lift coefficient. It was also shown that a small difference exists between the 15 deg cant/-4 deg incidence flight and wind tunnel predicted data. This difference was attributed to the pillowing of the winglet skins in flight which would decrease the winglet performance.

Lux, D. P.↗

Ongoing Study of Supersonic Retro-Propulsion Using Structured Overset Grids and OVERFLOW

The interest in supersonic retro-propulsion (SRP) as a means of deceleration during planetary entry increases with the desire to land high mass vehicles on Mars. Since it is difficult to obtain flight data or properly simulate this type of flow field in a wind tunnel, the use of computational fluid dynamics (CFD) becomes increasingly important, as does the need to verify the current CFD methods. This presentation will show results from structured overset grids and OVERFLOW, a Reynolds Averaged Navier-Stokes solver, obtained during the continuing CFD verification process. Flow structure, surface pressure, forces, and moments are compared to historic and modern wind tunnel data as well as to other Navier-Stokes solvers, DPLR and FUN3D. Cases include single and multiple nozzle cases from the Jarvinen and Adams experiment,i the Daso et al experiment, and a recent test in the NASA Langley Unitary Wind Tunnel (scheduled for June 2010).

Schauerhamer, Daniel Guy↗

The interference of the model support mast with measurements of the longitudinal and lateral aerodynamic coefficients

The effects the single-bottom support masts used in the ONERA S1 and S4 wind tunnels have on aerodynamic data collected with scale model aircraft were examined experimentally and analytically. Systematic studies were performed on the flow characteristics around different diameters for the mounts. Scaling methods used to make data from one wind tunnel correspond to data from the other are described. Airbus 320 models were introduced into the tests and mast-body flow interactions were observed. A summary is presented of restrictions on the mast diameters, relative to cylindrical model diameters, which will minimize the effects the masts have on longitudinal and lateral aerodynamic stability data.

Vandekreeke, C.↗