Search NASA⌕ Search

SEARCH · Search NASA

Results for “2) Tectonics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Late Precambrian aulacogens of the North China craton

According to tectonic styles, the Precambrian evolution history of the North China craton may be subdivided into four stages: (1) Archean consolidation in 3.5 to 2.5 Ga, (2) Early Proterozoic rifting in 2.5 to 1.8 Ga, (3) Late Precambrian aulacogen in 1.8 to 0.8 Ga and (4) Platform regime after 0.8 Ga. In the Late Precambrian aulacogen stage of the North China craton there were two main aulacogens, Yanliao and Zhongtiao (Y and Z), developed in Middle Proterozoic time with an age 1.8 to 1.0 Ga. Their NE trend caused them to meet together in the central part of the craton and build up one great Y-Z aulacogen throughout the craton.

Qian, X.↗

Tectonic history of the terrestrial planets

It is impossible in a single brief summary to convey the full range of research results that have come from this project over the last 13 years. The sweep of subjects covered ranges widely over the broad areas of the thermal and tectonic evolution of the terrestrial planets. A full list of all publications supported by this grant is presented. The list includes 48 published journal articles, 2 papers currently in press, 3 chapters of books, 4 M.I.T. theses, 1 technical report, and 107 published abstracts and extended abstracts. All of these publications were submitted separately to NASA at the time of publication or submission.

Solomon, Sean C.↗

Venus volcanism - Initial analysis from Magellan data

Magellan images confirm that volcanism is widespread and has been fundamentally important in the formation and evolution of the crust of Venus. High-resolution imaging data reveal evidence for intrusion (dike formation and cryptodomes) and extrusion (a wide range of lava flows). Also observed are thousands of small shield volcanoes, larger edifices up to several hundred kilometers in diameter, massive outpourings of lavas, and local pyroclastic deposits. Although most features are consistent with basaltic compositions, a number of large pancake-like domes are morphologically similar to rhyolite-dacite domes on earth. Flows and sinuous channels with lengths of many hundreds of kilometers suggest that extremely high effusion rates or very fluid magmas (perhaps komantiites) may be present. Volcanism is evident in various tectonic settings (coronae, linear extensional and compressional zones, mountain belts, upland rises, highland plateaus, and tesserae). Volcanic resurfacing rates appear to be low (less than 2 cu km/yr) but the significance of dike formation and intrusions, and the mode of crustal formation and loss remain to be established.

Head, James W.↗

Tectonic Processes on Planets and Satellites

The final report is comprised of 7 journal articles that were completed during the reporting period. Topics covered include:(1) photogeologic analysis of the Magellan stereo view of six coronae; (2) the ancient age of Maxwell Montes; (3) timescale of regional plains emplacement on Venus; (4) remote and local stresses and calderas on Mars; (5) lunar linear rilles; (6) stratigraphical constraints on the duration of tessera formation on Venus; and (7) the use of magnetic signatures in identifying shallow intrusions on the Moon.

Head, J. W.↗

Identification and interpretation of tectonic features from ERTS-A imagery

The author has identified the following significant results. A set of criteria characterizing known mineralized areas are: (1) occurrence at structural bends, discontinuities, complex deformations along fault zones and intersections; (2) complex terrain textures produced by fracture intersections; (3) color and tone anomalies produced by igneous intrusives, alteration effects, and oxidation. Significant fracture systems which appear to be most commonly related to mineralization in central and northeastern Nevada trend northeast-southwest, north-south, and north-northwest. In the area from Goldfield and Beatty, Nevada, to south of Las Vegas, ERTS-1 and Skylab imagery have been examined together to study an apparent correlation of mineralized areas with suspected hydrothermal alteration effects. It was observed that areas of mineralization are of complex structure, usually cut by many fractures, and sometimes have a similar mottled or variegated appearance. Although the Beatty-Rhyolite mining district is now largely inactive, several analogous areas not known to be mineralized have been identified. Identification of specific mineral prospects within general targets requires extensive field work and detailed geophysical exploration.

Abdel-Gawad, M.↗

Identification and interpretation of tectonic features from Skylab imagery

The author has identified the following significant results. Two alternate models for the extension of the Texas zone through the Mojave Desert block have been developed: (1) along the Pisgah Line, and (2) along the eastern Transverse Ranges; this model suggests a counterclockwise rotation of the Mojave block. Analysis of S190B photographs of the western Mojave Desert provides strong evidence for the feasibility of identifying recent fault breaks.

Abdel-Gawad, M.↗

Remote sensing aids geologic mapping

Remote sensing techniques were applied to general geologic mapping along the Rio Grande rift zone in central Colorado. A geologic map of about 1,100 square miles was prepared utilizing (1) prior published and unpublished maps, (2) detailed and reconnaissance field maps made for this study, and (3) remote sensor data interpretations. The map is used for interpretation of the complex Cenozoic tectonic and geomorphic histories of the area.

Knepper, D. H., Jr.↗

An investigation of the crustal properties of Australia and surrounding regions derived from interpretation of MAGSAT anomaly field data

The 2 deg averaged data set was analyzed and filtered to produce a magnetic anomaly map of the Australian continental region. The map was overlain on a tectonic map of Australia and correlations were made. A data set was selected that is dominated by relatively low elevation profiles with small changes of elevation within the Australian area in an effort to maximize the crustal anomaly field signal and reduce the effect of variation in satellite elevation. Support systems, both hardware and software are described and best-worst case errors encountered during processing of MAGSAT investigator tapes are summarized. The Broken Ridge anomaly was studied for model development purposes.

Johnson, B. D.↗

Modeling orbital changes on tectonic time scales

Geologic time series indicate significant 100 ka and 400 ka pre-Pleistocene climate fluctuations, prior to the time of such fluctuations in Pleistocene ice sheets. The origin of these fluctuations must therefore depend on phenomena other than the ice sheets. In a previous set of experiments, we tested the sensitivity of an energy balance model to orbital insolation forcing, specifically focusing on the filtering effect of the Earth's geography. We found that in equatorial areas, the twice-yearly passage of the sun across the equator interacts with the precession index to generate 100 ka and 400 ka power in our modeled time series. The effect is proportional to the magnitude of land in equatorial regions. We suggest that such changes may reflect monsoonal variations in the real climate system, and the subsequent wind and weathering changes may transfer some of this signal to the marine record. A comparison with observed fluctuations of Triassic lake levels is quite favorable. A number of problems remain to be studied or clarified: (1) the EBM experiments need to be followed up by a limited number of GCM experiments; (2) the sensitivity to secular changes in orbital forcing needs to be examined; (3) the possible modifying role of sedimentary processes on geologic time series warrants considerably more study; (4) the effect of tectonic changes on Earth's rotation rate needs to be studied; and (5) astronomers need to make explicit which of their predictions are robust and geologists and astronomers have to agree on which of the predictions are most testable in the geologic record.

Crowley, Thomas J.↗

How widely is the Andean type of continental margin represented in the Archean

Application of the principle of uniformitarianism to the Archean was discussed in a search for evidence of Archean-type continental margins in Archean rocks. The author cautioned that Archean rocks represent only 2 percent of the current exposure of the continents, half of which is in the North American Superior Province. Care must be taken in interpreting the global tectonic significance of relatively small exposures of Archean rocks, such as South India. Andean margins were characterized by their elongate shape, magmatic associations, and isotopic signatures. Although the compositional evidence alone will always be ambiguous, it was suggested that supporting structural evidence may aid in the identification of Archean Andean margins. Andean margin remains have been recognized in the Superior Province of Canada by these criteria, and the author suggested that the Closepet granite of South India may represent another example.

Burke, Kevin↗

Diapir-Induced Reorientation of Enceladus

A viewgraph presentation on the diapir-induced reorientation of Enceladus is shown. The contents include: 1) Activity on Enceladus; 2) Miranda's Coronae: Origin above Diapirs; 3) Reorientation of Miranda; 4) Planetary Reorientation; 5) Modeling Diapir-Induced Reorientation; 6) Diapir-Induced Reorientation: Results; 7) Tectonic Implications of Reorientation; 8) Additional Tests of Reorientation; 9) Diapir-Induced Reorientation of Enceladus: Conclusions; and 10) Diapir-Induced Reorientation: Future Work

Enceladu↗

Post-glacial Sediment Load and Subsidence in Coastal Louisiana

Sea level rise in the Gulf of Mexico has occurred at a rate of 1.8-2.2 mm/yr during the 20th century, or nearly the same as observed globally due to combined steric and water mass changes. Tide gauges in coastal Louisiana, however, record a substantially larger rate of rise and while a number of causal mechanisms may be responsible, their specific contribution is poorly understood. Using a realistic viscoelastic Earth model, detailed geologic parameters for south Louisiana and new GPS data, we demonstrate that Holocene sedimentary loading in the Gulf and Mississippi River delta is capable of contributing to 1-8 mm/yr of subsidence over areas of 30-0.75 x 10(exp 3) km(exp 2).

rheology mantle↗

Rheology of Diabase: Implications for Tectonics on Venus and Mars

Two important goals of our experimental investigation of the rheological behavior of diabase rocks were: (1) to determine flow laws describing their creep behavior over wide ranges of temperature, stress and strain rate and (2) to develop an understanding of the physical mechanisms by which these rocks flow under laboratory conditions. With this basis, a primary objective then was to construct constitutive equations that can be used to extrapolate from laboratory to planetary conditions. We specifically studied the rheological properties of both natural rock samples and synthetic aggregates. The former provided constraints for geologic systems, while the latter defined the relative contributions of the constituent mineral phases and avoided the influence of glass/melt found in natural samples. In addition, partially molten samples of crustal rock composition were deformed in shear to large strains (greater than 200%) important in crustal environments. The results of this research yielded essential rheological properties essential for models of crustal deformation on terrestrial planets, specifically Venus and Mars, as well as on the geodynamical evolution of these planets. Over the past three years, we also completed our investigation of the creep behavior of water ice with applications to the glaciers, ice sheets and icy satellites. Constitutive equations were determined that describe flow over a wide ranged of stress, strain rate, grain size and temperature. In the case of ice, three creep regimes were delineate. Extrapolation demonstrates that dislocation glide and grain boundary sliding processes dominate flow in ice I under planetary conditions and that diffusion creep is not an important deformation mechanism either in the laboratory or on icy satellites. These results have already been incorporated by other investigators into models describing, for example, the thickness and stability of the ice shell on Europa and to unravel long-standing discrepancies between field observations on glaciers and laboratory results.

Kohlstedt, David L.↗

Remote sensing aids geologic mapping.

Remote sensing techniques have been applied to general geologic mapping along the Rio Grande rift zone in central Colorado. A geologic map of about 1,100 square miles was prepared utilizing (1) prior published and unpublished maps, (2) detailed and reconnaissance field maps made for this study, and (3) remote sensor data interpretations. The map is to be used for interpretation of the complex Cenozoic tectonic and geomorphic histories of the area. Regional and local geologic mapping can be aided by the proper application of remote sensing techniques. Conventional color and color infrared photos contain a large amount of easily-extractable general geologic information and are easily used by geologists untrained in the field of remote sensing. Other kinds of sensor data used in this study, with the exception of SLAR imagery, were generally found to be impractical or unappropriate for broad-scale general geologic mapping.

Knepper, D. H., Jr.↗

On the origin of the Moon by rotational fission

Consistent with the current understanding of the Moon's bulk composition, internal structure, seismic and tectonic characteristics, evidence is discussed which suggests that the Moon originated by fission. The concepts discussed are: (1) all stars are members of close or contact binary systems; (2) advances in dynamical studies of the fission hypothesis show that stellar bodies also undergo fission; (3) the newly formed proto moon would have lost a large fraction of its original mass via mass transfer; and (4) due to the foregoing concepts the result would be a moon of terrestrial mantle material which was depleted in both metallic iron and volatiles.

Binder, A. B.↗

Environmental Signatures for Habitability: What to Measure and How to Rank the Habitability Potential of Mars

The environmental signatures for habitability are not necessarily biosignatures, even though on Earth, they are definitive proof of habitability. It is the constant overprint of the chemical signatures of life that makes it difficult to recognize the chemical and physical properties of a potentially habitable environment as distinct from an inhabited one. Mars Science Laboratory (MSL) will soon embark on a mission to Mars to assess its past or present habitability, so it is useful to examine how we measure habitability on Earth and prepare for how that approach may differ for Mars. This exercise includes: (a) articulation of fundamental assumptions about habitability, (b) an inventory of factors that affect habitability, (c) development of metrics, measurement approach and implementation, and (d) a new classification scheme for planetary habitability that goes beyond the binary "yes" or "no." There may be dozens of factors that affect habitability and they can be weighted as a function of specific environment. However a robotic, in situ investigation even on Earth has constraints that prevent the measurement of every environmental factor, so metrics must be reduced to the most relevant subset, given available time, cost, technical feasibility and scientific importance. Many of the factors could be measured with a combination of orbital data and the MSL payload. We propose that, at a minimum, a designation of high habitability potential requires the following conditions be met: (a) thermally stable with respect to extremes and frequency of fluctuation, (b) has more than one energy source, (c) sufficient chemical diversity to make compounds with covalent and hydrogen bonding, (d) can moderate ionizing radiation enough to allow a stable or evolving pool of organic molecules, (e) must have water or other high quality polar solvent, (f) must be able to renew chemical resources (e.g., plate tectonics, volcanism or something else we haven't envisioned). A measurement approach we have taken to measure habitability on Earth is : 1. Study remote sensing data, maps, etc. 2. Decide how big an area to measure. 3. Determine the spatial sampling rate. 4. Determine the temporal sampling rate. 5. Determine the order of measurements 6. Decide where to begin measurements 7. Select locations at field site and proceed While science drives each of the steps, there are additional constraints, e.g., technical, time, cost, safety (risk). This approach is also executable on Mars. Measurement of past habitability is more challenging both for Earth and Mars where access to the past means subsurface access and confrontation with unknowns about preservation of the martian past. Some environments preserve evidence of past habitability better than others, and this is where selection of the landing site to maximize the preservation potential of habitability indicators will be key. Mars presents an opportunity to discover transitional states between habitable or not, and we offer a ranking scale for planetary habitability with Mars as the second test subject: CLASS ONE Uninhabitable and likely has never been so CLASS TWO Has a high potential but no confirmed observation of life (as defined above) CLASS THREE Inhabited (we find life) 3-A Globally inhabited 3-B Primitive life; early in its evolution, but not yet globally established 3-C Exists only in refugia -- planet heading toward class four CLASS FOUR Post-habitable (there once was life, but now it's gone) MSL provides an opportunity to carefully investigate the habitability of at least one site on Mars and it will reveal much about the possible states of planetary habitability

Conrad, Pamela G.↗

Pargo Chasma and its relationship to global tectonics

Pargo Chasma was first identified on Pioneer Venus data as a 10,000 km long lineation extending from Atla Regio in the north terminating in the plains south of Phoebe Regio. More recent Magellan data have revealed this feature to be one of the longest chains of coronae so far identified on the planet. Stofan et al have identified 60 coronae and 2 related features associated with this chain; other estimates differ according to the classification scheme adopted, for example Head et al. identify only 29 coronae but 43 arachnoids in the same region. This highlights one of the major problems associated with the preliminary mapping of the Magellan data: there has been an emphasis on identifying particular features on Venus without a universally accepted scheme to classify those features. Nevertheless, Pargo Chasma is clearly identified as a major tectonic belt of global significance. Together with the Artemis-Atla-Beta tectonic zone and the Beta-Phoebe rift belt, Pargo Chasma defines a region on Venus with an unusually high concentration of tectonic and volcanic features. Thus, an understanding of the processes involved in the formation of Pargo Chasma may lend significant insight into the evolution of the region and the planet as a whole. I have produced a detailed 1 to 10 million scale map of Pargo Chasma and the surrounding area from preliminary USGS controlled mosaiced image maps of Venus constructed from Magellan data. In view of the problems highlighted above in relation the efforts already made at identifying a particular set of features I have mapped the region purely on the basis of the geomorphology visible in the magellan data without any attempt at identifying a particular set or class of features. Thus, the map produced distinguishes between areas of different brightness and texture. This has the advantage of highlighting the tectonic fabric of Pargo Chasma and clearly illustrates the close inter-relationship between individual coronae and the surrounding tectonic belts.

Ghail, R. C.↗

The intercrater plains of Mercury and the Moon: Their nature, origin and role in terrestrial planet evolution. Chronology of surface history of Mercury

Phases in the history of the planet Mercury include: (1) condensation and accretion; (2) heating; (3) planetary expansion during heavy bombardment; (4) tidal spin-down and lineament formation; (5) P5 plains emplacement; (6) P4 plains emplacement; (7) peak planetary volume in P3 period; (8) scarp formation; (9) Caloris Basin formation, late class 3; (10) scarp formation and P2 plains formation; (11) smooth plains formation in and around large basins; (12) late or local tectonic stress; and (13) quiescent class 1 period. Although the cooling and contraction of the lithosphere are complete, the core remains molten as an active dynamo, producing the magnetic fields detected by Mariner 10. Plains produced since core formation (P3 to P-1) should record its magnetic activity. Cratering during the Class 2 and Class 1 periods is probably not enough to distribute ballistic materials and homogenize any color differences.

Leake, M. A.↗