Search NASA⌕ Search

SEARCH · Search NASA

Results for “4D”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Diabatic dynamic initialization

A version of the dynamical adjustment procedure is generalized in order to make the procedure applicable to a diabatic model. In this new initialization procedure, backward adiabatic model integration is followed by forward diabatic model integration, with a high-frequency (low-pass) time filter in the form of the Euler backward time-differencing scheme applied throughout the integration. The new procedure was applied to the Goddard Laboratory for Atmospheres 4D data-assimilation system. It was found that, right from the beginning of the forecast integration, the forecast tendencies (and fields) were free of any noise due to imbalance in initial conditions, and the shocks related to an initial imbalance between model physics and dynamics, or the initial spinup effect, were practically removed.

Fox-Rabinovitz, Michael S.↗

Bond length, dipole moment, and harmonic frequency of CO

A detailed comparison of some properties of CO is given, at the modified coupled-pair functional, single and double excitation coupled-cluster (CCSD), and CCSD(T) levels of theory (including a perturbational estimate for connected triple excitations), using a variety of basis sets. With very large one-particle basis sets, the CCSD(T) method gives excellent results for the bond distance, dipole moment, and harmonic frequency of CO. In a (6s 5p 4d 3f 2g 1h) + (1s 1p 1d) basis set, the bond distance is about 0.005a0 too large, the dipole moment about 0.005 a.u. too small, and the frequency about 6/cm too small, when compared with experimental results.

Barnes, Leslie A.↗

Retrieval of wind temperature and pressure from single Doppler radar and a numerical model

A 4D data assimilation algorithm to obtain 3D wind and thermodynamic fields from radial velocities and a numerical model is derived. It is a blend of the continuous updating technique of Charney et al. (1969) and a diagnostic pressure and temperature retrieval technique suggested by Gal-Chen (1978). This model is tested only against model-generated data which are viewed as 'data observed from a real atmosphere'. A thermal bubble developing in a dry, neutral environment is simulated. The thermal recovery technique is found to be a necessary procedure to obtain successful data assimilation results. The present assimilation method is found to be capable of reducing the 'observational error' and making the assimilation run converge toward the control run. Without data insertion, errors in the nonobserved wind component are large.

Liou, Yu-Chieng↗

Domain connectivity among systems of overset grids

This progress report describes research performed to achieve algorithmic improvements in the use of overset grids for the computation of unsteady flowfields about geometrically complex and moving component configurations. A hole-map computational method is detailed that reduces computational demand and corresponding demand on human resources. Results indicate that the method is both efficient and flexible for use in complex simulation cases. Tests were performed on shuttle orbiter/external tank, wing/store, and V-22 tilt-rotor configurations. The number of simulated points and the corresponding time on a SGI 4D-210 workstation are presented.

Meakin, Robert L.↗

The Final Approach Spacing Tool (FAST)

The Final Approach Spacing Tool (FAST) is a decision support tool for terminal area (TRACON) air traffic controllers. FAST utilizes 4D trajectory synthesis, human performance modeling, and a graphical user interface to plan and advise efficient, conflict-free aircraft trajectories for arrival traffic. It increases airport capacity, reduces arrival delays, and reduces controller workload by issuing: sequence and runway advisories ("Passive" FAST) and speed and heading advisories ("Active" FAST). This paper discusses in detail the architecture of the system and operational tests done on the system.

Slattery, Rhonda↗

Collision Strengths for Electron Impact Excitation of Inelastic Transitions in Ar II

We have calculated collision strengths for electron impact excitation of inelastic transitions in Ar II using the R-matrix method in two independent nine- and 19-state close-coupling approximations. In the nine-state calculation the 3s(sup 2)3p(sup 5)2p(sup 0), 3S(sup 3)p(sup 6)S-2, 3p(sup 4)(P-3)4s(sup 2)P, 3p(sup 4)(P-3)3d(sup 2)P, 3p(sup 4)(D-1)4s(sup 2)D, 3p(sup 4)(P-3)3d(sup 2)D, 3p(sup 4)(S-1)4s(sup 2)S, 3p(sup 4)(D-1)3d(sup 2)S and 3p(sup 4)(D-1)4d(sup 2)S states are included, while in the 19-state calculation these states plus an additional ten states 3p(sup 4)(P-3)3d(sup 2)F, 3p(sup 4)(P-3)4p(sup 2)D(sup 0), 2p(sup 0), 2S(sup 0), 3p(sup 4)(D-1)4p(sup 2)P(sup 0), 2D(sup O), 2F(sup 0), 3p(sup 4)(D-1)3d(sup 2)D, p-2 and 3p(sup 4)(S-1)4p(sup 2)P(sup 0) are considered. These target states are represented by fairly extensive configuration-interaction wavefunctions which yield excitation energies and oscillator strengths that are generally in good agreement with the available most accurate calculations and the experimental values. Rydberg series of resonances converging to the excited state thresholds are included in the calculation. The effective collision strengths are obtained assuming a Maxwellian distribution of electron energies which are tabulated over the temperature range (0.5-20) x 10(exp 4) K.

Tayal, S. S.↗

Oscillator Strengths of Allowed and Intercombination Transitions in Neutral Sulfur

We have calculated oscillator strengths and transition probabilities of electric-dipole allowed and intercombination transitions from fine-structure levels of the ground 3s(sup 2)3p(sup 4) configuration to the levels belonging to configurations 3s(sup 2)3p(sup 3)4s, 3s(sup 2) 3p(sup 3)5s, 3(sup 2)3p(sup 3)3d, 3s(sup 2)3p(sup 3)4d of neutral sulfur. Extensive configuration-interaction wave functions are used to represent these levels. The relativistic corrections have been included through the Breit-Pauli Hamiltonian. The results are compared with previous theoretical calculations and with measurements.

Tayal, S. S.↗

Model Error Estimation for the CPTEC Eta Model

Statistical data assimilation systems require the specification of forecast and observation error statistics. Forecast error is due to model imperfections and differences between the initial condition and the actual state of the atmosphere. Practical four-dimensional variational (4D-Var) methods try to fit the forecast state to the observations and assume that the model error is negligible. Here with a number of simplifying assumption, a framework is developed for isolating the model error given the forecast error at two lead-times. Two definitions are proposed for the Talagrand ratio tau, the fraction of the forecast error due to model error rather than initial condition error. Data from the CPTEC Eta Model running operationally over South America are used to calculate forecast error statistics and lower bounds for tau.

Tippett, Michael K.↗

Improving Reanalyses Using TRMM and SSM/I-Derived Precipitation and Total Precipitable Water Observations

Global reanalyses currently contain significant errors in the primary fields of the hydrological cycle such as precipitation, evaporation, moisture, and the related cloud fields, especially in the tropics. The Data Assimilation Office (DAO) at the NASA Goddard Space Flight Center has been exploring the use of rainfall and total precipitable water (TPW) observations from the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) and the Special Sensor Microwave/ Imager (SSM/I) instruments to improve these fields in reanalyses. The DAO has developed a "1+1"D procedure to assimilate 6-hr averaged rainfall and TPW into the Goddard Earth Observing System (GEOS) Data Assimilation System (DAS). The algorithm is based on a 6-hr time integration of a column version of the GEOS DAS. The "1+1" designation refers to one spatial dimension plus one temporal dimension. The scheme minimizes the least-square differences between the satellite-retrieved rain rates and those produced by the column model over the 6-hr analysis window. The control variables are analysis increments of moisture within the Incremental Analysis Update (IAU) framework of the GEOS DAS. This 1+1D scheme, in its generalization to four dimensions, is related to the standard 4D variational assimilation but differs in its choice of the control variable. Instead of estimating the initial condition at the beginning of the assimilation cycle, it estimates the constant IAU forcing applied over a 6-hr assimilation cycle. In doing so, it imposes the forecast model as a weak constraint in a manner similar to the variational continuous assimilation techniques. We present results from an experiment in which the observed rain rate and TPW are assumed to be "perfect". They show that assimilating the TMI and SSM/I-derived surface precipitation and TPW observations improves not only the precipitation and moisture fields but also key climate parameters directly linked to convective activities such as clouds, the outgoing longwave radiation, and the large-scale circulation in the tropics. In particular, assimilating these data types reduce the state-dependent systematic errors in the assimilated products. The improved analysis also leads to a better short-range forecast, but the impact is modest compared with improvements in the time-averaged fields. These results suggest that, in the presence of biases and other errors of the forecast model, it is possible to improve the time-averaged "climate content" in the assimilated data without comparable improvements in the short-range forecast skill. Results of this experiment provide a useful benchmark for evaluating error covariance models for optimal use of these data types.

Hou, Arthur Y.↗

Improving Global Reanalyses and Short-Range Forecast Using TRMM and SSM/I-Derived Precipitation and Moisture Observations

Global reanalyses currently contain significant errors in the primary fields of the hydrological cycle such as precipitation, evaporation, moisture, and the related cloud fields, especially in the tropics. The Data Assimilation Office (DAO) at the NASA Goddard Space Flight Center has been exploring the use of tropical rainfall and total precipitable water (TPW) observations from the TRMM Microwave Imager (TMI) and the Special Sensor Microwave/ Imager (SSM/I) instruments to improve short-range forecast and reanalyses. We describe a 1+1D procedure for assimilating 6-hr averaged rainfall and TPW in the Goddard Earth Observing System (GEOS) Data Assimilation System (DAS). The algorithm is based on a 6-hr time integration of a column version of the GEOS DAS, hence the 1+1D designation. The scheme minimizes the least-square differences between the observed TPW and rain rates and those produced by the column model over the 6-hr analysis window. This 1+1D scheme, in its generalization to four dimensions, is related to the standard 4D variational assimilation but uses analysis increments instead of the initial condition as the control variable. Results show that assimilating the TMI and SSW rainfall and TPW observations improves not only the precipitation and moisture fields but also key climate parameters such as clouds, the radiation, the upper-tropospheric moisture, and the large-scale circulation in the tropics. In particular, assimilating these data reduce the state-dependent systematic errors in the assimilated products. The improved analysis also provides better initial conditions for short-range forecasts, but the improvements in forecast are less than improvements in the time-averaged assimilation fields, indicating that using these data types is effective in correcting biases and other errors of the forecast model in data assimilation.

Hou, Arthur Y.↗

Environmental Forcing of Super Typhoon Paka's (1997) Latent Heat Structure

The distribution and intensity of total (i.e., combined stratified and convective processes) rainrate/latent heat release (LHR) were derived for tropical cyclone Paka during the period 9-21 December, 1997 from the F-10, F-11, F-13, and F-14 Defense Meteorological Satellite Special Sensor Microwave/Imager and the Tropical Rain Measurement Mission Microwave Imager observations. These observations were frequent enough to capture three episodes of inner core convective bursts that preceded periods of rapid intensification and a convective rainband (CRB) cycle. During these periods of convective bursts, satellite sensors revealed that the rainrates/LHR: 1) increased within the inner eye wall region; 2) were mainly convectively generated (nearly a 65% contribution), 3) propagated inwards; 4) extended upwards within the middle and upper-troposphere, and 5) became electrically charged. These factors may have caused the eye wall region to become more buoyant within the middle and upper-troposphere, creating greater cyclonic angular momentum, and, thereby, warming the center and intensifying the system. Radiosonde measurements from Kwajalein Atoll and Guam, sea surface temperature observations, and the European Center for Medium Range Forecast analyses were used to examine the necessary and sufficient condition for initiating and maintaining these inner core convective bursts. For example, the necessary conditions such as the atmospheric thermodynamics (i.e., cold tropopause temperatures, moist troposphere, and warm SSTs [greater than 26 deg]) suggested that the atmosphere was ideal for Paka's maximum potential intensity (MPI) to approach super-typhoon strength. Further, Paka encountered weak vertical wind shear (less than 15 m/s ) before interacting with the westerlies on 21 December. The sufficient conditions, on the other hand, appeared to have some influence on Paka's convective burst, but the horizontal moisture flux convergence values in the outer core were weaker than some of the previously examined tropical cyclones. Also, the upper tropospheric outflow generation of eddy relative angular momentum flux convergence was 4D much less than that found during moderate tropical cyclone/trough interaction. These results indicated how important the external necessary condition and the internal forcing (i.e., CRB cycle) were in generating Paka's convective bursts as compared to the external sufficient forcing mechanisms found in higher latitude tropical cyclones. Later, as Paka began to interact with the westerlies, both the necessary (i.e., strong vertical shear and colder SSTs) and sufficient (i.e., dry air intrusion) external forcing mechanisms helped to decrease Paka's rainrate.

Rodgers, Edward B.↗

Improving Global Reanalyses and Short Range Forecast Using TRMM and SSM/I-Derived Precipitation and Moisture Observations

Global reanalyses currently contain significant errors in the primary fields of the hydrological cycle such as precipitation, evaporation, moisture, and the related cloud fields, especially in the tropics. The Data Assimilation Office (DAO) at the NASA Goddard Space Flight Center has been exploring the use of tropical rainfall and total precipitable water (TPW) observations from the TRMM Microwave Imager (TMI) and the Special Sensor Microwave/ Imager (SSM/I) instruments to improve short-range forecast and reanalyses. We describe a "1+1"D procedure for assimilating 6-hr averaged rainfall and TPW in the Goddard Earth Observing System (GEOS) Data Assimilation System (DAS). The algorithm is based on a 6-hr time integration of a column version of the GEOS DAS, hence the "1+1"D designation. The scheme minimizes the least-square differences between the observed TPW and rain rates and those produced by the column model over the 6-hr analysis window. This 1+lD scheme, in its generalization to four dimensions, is related to the standard 4D variational assimilation but uses analysis increments instead of the initial condition as the control variable. Results show that assimilating the TMI and SSM/I rainfall and TPW observations improves not only the precipitation and moisture fields but also key climate parameters such as clouds, the radiation, the upper-tropospheric moisture, and the large-scale circulation in the tropics. In particular, assimilating these data reduce the state-dependent systematic errors in the assimilated products. The improved analysis also provides better initial conditions for short-range forecasts, but the improvements in forecast are less than improvements in the time-averaged assimilation fields, indicating that using these data types is effective in correcting biases and other errors of the forecast model in data assimilation.

Hou, Arthur Y.↗

Critical Evaluation of 0-30 km Profile Information in Ground-Based Zenith-Sky and Satellite-Measured Backscattered UV Radiation

We now have several decades of experience in deriving vertical ozone profiles from the measurements of diffuse ultraviolet radiation by both ground and satellite-based instruments using Umkehr and BUV techniques. Continuing technological advances are pushing the state-of-the-art of these measurements to high spectral resolution and broader wavelength coverage. These modern instruments include the ground-based Brewer and satellite-based Global Ozone Monitoring Experiment (GOME) instruments, as well as advanced instruments being developed by ESA(SCIAMACHY), Netherlands(OMI) and Japan(ODUS). However, one of the issues that remains unresolved is the 0-30 km ozone profile information retrievable from these measurements. Though it is commonly believed that both the Umkehr and the satellite-based BUV techniques have very limited profile information below 30 km, there are those who argue that the data from these instruments should continue to be reported in this altitude range for they compare well with ozonesondes and hence there is useful scientific information. Others claim that the limitations of the Umkehr and BUV techniques are largely due to their low spectral resolution, and that the profile information below 30 km can be greatly improved by going to high spectral resolution instruments, such as Brewer and GOME. The purpose of this paper is to provide a critical evaluation of the 0-30 km ozone profile information in the various UV remote sensing techniques. We use a database of individual ozone profiles created using ozonesondes and SAGE and 4D ozone fields generated by data assimilation techniques to simulate radiances measured by the various techniques. We then apply a common inversion approach to all the methods to systematically examine how much profile information is available simply from the knowledge of total ozone, how much additional profile information is added by the traditional Dobson Umkehr and satellite buv techniques, and how much better one can do by adding additional wavelengths and by going to higher spectral resolution. An open and honest discussion of these issues is critical to provide the ozone science community a realistic assessment of the quality of data in the lower stratosphere and troposphere expected from both past and future instruments.

Bhartia, Pawan↗

3D Flow Visualization Using Texture Advection

Texture advection is an effective tool for animating and investigating 2D flows. In this paper, we discuss how this technique can be extended to 3D flows. In particular, we examine the use of 3D and 4D textures on 3D synthetic and computational fluid dynamics flow fields.

Kao, David↗

D-Wave Resonances in Positronium Hydride

The problem of calculating the position and width of the lowest-lying (L = 0, 1) resonances in the Ps + H scattering system has recently been re-examined by the authors [1]. In the model used, resonances axe assumed generated by bound Rydberg states in the closed re-arranged channel [e(+) + H(-)]. This infinite series of Coulomb bound states are shifted somewhat by the coupling with the open scattering channel [Ps + H]. Estimates using this approach, first carried out by one of the authors [2] using a simple form of scattering wavefunction, indicated an anticipated small shift of resonance away from the Rydberg energy in the S-wave (L = 0). More recent results by Ho and Yan [3] using the complex-rotation method showed unexpected significant shifting in the P (L = 1) and D (L = 2)-wave resonance energies from their respective unperturbed values. Our re-calculation of the resonances [I I for L = 0 and I indicates that, in each case, reasonably consistent resonance energies are obtained by coupling the two lowest lying states (IS and 2S for L = 0 and 2P and 3P for L = 1). For each L it is the higher state (2S and 3P, respectively) that produces the resonance. The lower state (1S and 2P, respectively) is effective only in increasing the non-resonant phase shift. In this work we extend the model to L = 2 (D-waves). Our results show that, unlike the S and P-waves, the 313-state alone produces a resonant energy that is very close to the result of Yan and Ho [3]. Inclusion of the 4D-state produces a second resonance in the scattering system shifted up slightly from its unperturbed Rydberg energy.

Drachman, Richard J.↗

New Cryogenic Optical Test Capability at Marshall Space Flight Center's Space Optics Manufacturing Technology Center

A new cryogenic optical testing capability exists at Marshall Space Flight Center's Space Optics Manufacturing Technology Center (SOMTC). SOMTC has been performing optical wavefront testing at cryogenic temperatures since 1999 in the X-ray Cryogenic Test Facility's (XRCF's) large vacuum chamber. Recently the cryogenic optical testing capability has been extended to a smaller vacuum chamber. This smaller horizontal cylindrical vacuum chamber has been outfitted with a helium-cooled liner that can be connected to the facility's helium refrigeration system bringing the existing kilowatt of refrigeration capacity to bear on a 1 meter diameter x 2 meter long test envelope. Cryogenic environments to less than 20 Kelvin are now possible in only a few hours. SOMTC's existing instruments (the Instantaneous Phase-shifting Interferometer (IPI) from ADE Phase-Shift Technologies and the PhaseCam from 4D Vision Technologies) view the optic under test through a 150 mm clear aperture BK-7 window. Since activation and chamber characterization tests in September 2001, the new chamber has been used to perform a cryogenic (less than 30 Kelvin) optical test of a 22.5 cm diameter x 127 cm radius of curvature SiO2 mirror, a cryogenic survival (less than 30 Kelvin) test of an adhesive, and a cryogenic cycle (less than 20 Kelvin) test of a ULE mirror. A vibration survey has also been performed on the test chamber. Chamber specifications and performance data, vibration environment data, and limited test results will be presented.

Kegley, Jeff↗

Comparisons of Kinematics and Dynamics Simulation Software Tools

Kinematic and dynamic analyses for moving bodies are essential to system engineers and designers in the process of design and validations. 3D visualization and motion simulation plus finite element analysis (FEA) give engineers a better way to present ideas and results. Marshall Space Flight Center (MSFC) system engineering researchers are currently using IGRIP from DELMIA Inc. as a kinematic simulation tool for discrete bodies motion simulations. Although IGRIP is an excellent tool for kinematic simulation with some dynamic analysis capabilities in robotic control, explorations of other alternatives with more powerful dynamic analysis and FEA capabilities are necessary. Kinematics analysis will only examine the displacement, velocity, and acceleration of the mechanism without considering effects from masses of components. With dynamic analysis and FEA, effects such as the forces or torques at the joint due to mass and inertia of components can be identified. With keen market competition, ALGOR Mechanical Event Simulation (MES), MSC visualNastran 4D, Unigraphics Motion+, and Pro/MECHANICA were chosen for explorations. In this study, comparisons between software tools were presented in terms of following categories: graphical user interface (GUI), import capability, tutorial availability, ease of use, kinematic simulation capability, dynamic simulation capability, FEA capability, graphical output, technical support, and cost. Propulsion Test Article (PTA) with Fastrac engine model exported from IGRIP and an office chair mechanism were used as examples for simulations.

Yeu-Sheng Paul Shiue↗

D-wave Resonances in Positronium Hydride

We have recently reexamined the problem of calculating the positions and widths of the lowest-lying S- and P-state resonances in the Ps+H scattering system. The resonances are generated by bound Rydberg states in the closed rearranged channel (e(+)+H(-)), shifted somewhat by coupling with the open scattering channel. This picture had been successfully applied for S-waves, but more recent results showed unexpectedly large shifts in both P- and D-wave resonances. Our recalculation for the S- and P-waves showed that the series of resonances begins with the second Rydberg state, giving rise to an apparent large shift. Now we have extended the calculations to D states. Here we find the expected results: The 3D Rydberg state produces a resonance very close to the result of Yan and Ho, and inclusion of the 4D state gives a second resonance only slightly shifted.

Drachman, Richard J.↗