Search NASA⌕ Search

SEARCH · Search NASA

Results for “ACRYLIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Heterogeneous Coordination Environments in Lithium-Neutralized Ionomers Identified Using 1H and 7Li MAS NMR

The carboxylic acid proton and the lithium coordination environments for precise and random Li-neutralized polyethylene acrylic acid P(E-AA) ionomers were explored using high speed solid-state 1H and 7 Li MAS NMR. While the 7 Li NMR revealed only a single Li coordination environment, the chemical shift temperature variation was dependent on the precise or random nature of the P(E-AA) ionomer. The 1H MAS NMR revealed two different carboxylic acid proton environments in these materials. By utilizing 1H-7 Li rotational echo double resonance (REDOR) MAS NMR experiments, it was demonstrated that the proton environments correspond to different average 1H-7 Li distances, with the majority of the protonated carboxylic acids having a close through space contact with the Li. Molecular dynamics simulations suggest that the shortest 1H-7 Li distance corresponds to un-neutralized carboxylic acids directly involved in the coordination environment of Li clusters. These solid-state NMR results show that heterogeneous structural motifs need to be included when developing descriptions of these ionomer materials.

36 MATERIALS SCIENCE↗

Heterogeneous chain dynamics and aggregate lifetimes in precise acid-containing polyethylenes: Experiments and simulations

Melt state dynamics for a series of strictly linear polyethylenes with precisely spaced associating functional groups were investigated. The periodic pendant acrylic acid groups form hydrogen-bonded acid aggregates within the polyethylene (PE) matrix. The dynamics of these nanoscale heterogeneous morphologies were investigated from picosecond to nanosecond timescales by both quasi-elastic neutron scattering (QENS) measurements and fully atomistic molecular dynamics (MD) simulations. Two dynamic processes were observed. The faster dynamic processes which occur at the picosecond timescales are compositionally insensitive and indicative of spatially restricted local motions. The slower dynamic processes are highly composition dependent and indicate the structural relaxation of the polymer backbone. Higher acid contents, or shorter PE spacers between pendant acid groups, slow the structural relaxation timescale and increase the stretching parameter (β) of the structural relaxation. Additionally, the dynamics of specific hydrogen atom positions along the backbone correlate structural heterogeneity imposed by the associating acid groups with a mobility gradient along the polymer backbone. At time intervals (<2 ns), the mean-squared displacements for the four methylene groups closest to the acid groups are up to 10 times smaller than those of methylene groups further from the acid groups. At longer timescales acid aggregates rearrange and the chain dynamics of the slow, near-aggregate regions and the faster bridge regions converge, implying a characteristic timescale for the passage of chains between aggregates. As a result, the characterization of the nanoscale chain dynamics in these associating polymer systems both provides validation of simulation force fields and provides understanding of heterogeneous chain dynamics in associating polymers.

36 MATERIALS SCIENCE↗

The evolution of acidic and ionic aggregates in ionomers during microsecond simulations

We performed microsecond-long, atomistic molecular dynamics (MD) simulations on a series of precise poly(ethylene-co-acrylic acid) ionomers neutralized with lithium, with three different spacer lengths between acid groups on the ionomers and at two temperatures. Ionic aggregates form in these systems with a variety of shapes ranging from isolated aggregates to percolated aggregates. At the lower temperature of 423 K, the ionic aggregate morphologies to do not reach a steady-state distribution over the course of the simulations. At the higher temperature of 600 K, the aggregates are sufficiently mobile that they rearrange and reach steady state after hundreds of nanoseconds. For systems that are 100% neutralized with lithium, the ions form percolated aggregates that span the simulation box in three directions, for all three spacer lengths (9, 15, 21). In the partially neutralized systems, the morphology includes lithium ion aggregates that may also include some unneutralized acid groups, along with a coexisting population of acid group aggregates that form through hydrogen bonding. In the lithium ion aggregates, unneutralized acid groups tend to be found on the ends or sides of the aggregates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial electron transfer of perylenes: Influence of the anchor binding mode

Interfacial electron transfer (IET) through saturated single-linker and dual-linker groups from a perylene chromophore into nanostructured TiO2 films was studied by ultrafast spectroscopy. Perylene chromophores with one and two propanoic acid linker groups in the peri and ortho positions were investigated. In comparison to previously studied perylenes bound via unsaturated acrylic acid linkers, the chromophores with saturated linkers showed bi-exponential IET dynamics. Two distinct transfer times were observed that indicate the presence of two concurrent binding modes. A comparison between ortho- and peri-substituted sensitizers resulted in slower IET dynamics and weaker electronic coupling for ortho substitution. Finally, IET from sensitizers with saturated linker groups is neither promoted nor hindered by a second linker group. This indicates that only one of the two linkers binds covalently to the surface. This study reveals the importance of the anchor-binding mode and design considerations of the linker for regulating IET.

Chemistry↗

Ion exchange polymers and method for making

An ion exchange polymer comprised of an alkali metal or alkaline earth metal salt of a poly(carboxylic acid) in a poly(vinyl acetal) matrix is described. The polymer is made by treating a mixture made of poly(vinyl alcohol) and poly(acrylic acid) with a suitable aldehyde and an acid catalyst to cause acetalization with some cross-linking. The material is then subjected to an alkaline aqueous solution of an alkali metal salt or an alkali earth metal salt. All of the film forming and cross-linking steps can be carried out simultaneously, if desired.

Philipp, Warren H.↗

Effect of isopropanol cosolvent on the rheology and spinnability of aqueous polyacrylic acid solutions

Abstract We investigate the effect of alcohol fraction (isopropanol, IPA) in a binary water‐alcohol solvent mixture on the shear and extensional rheological properties, as well as the role of viscoelasticity on fiber formation of poly(acrylic acid) (PAA) in electrospinning. Comparison of the scaling of both specific viscosities η sp and extensional relaxation times λ E of PAA in water–IPA mixtures, showed stronger scaling compared to salt‐free aqueous polyelectrolyte solutions, except for the η sp in the unentangled regime displaying a polyelectrolyte‐like scaling η sp ~ c 0.5 for all IPA%. Such deviation suggested IPA induces association/aggregation of PAA. However, the trends between η sp and λ E magnitudes as a function of IPA% differ for concentrations compared in the entangled regime. The η sp as well as their elastic moduli exhibit a maximum, whereas λ E increases monotonically with IPA%, suggesting a complex interplay of various interactions are dictating their structure in water‐IPA mixtures, affecting their shear and extensional response differently. Electrospinning experiments showed increasing IPA% reduces the onset of both beaded and uniform fibers. Analysis using dimensionless numbers indicated the enhancement of their elasticity by IPA, and the consequent stabilizing effect on their jets/filaments against break‐up during electrospinning, plays a role in the improvement of their fiber formation.

36 MATERIALS SCIENCE↗

Solvents and slurries comprising a poly(carboxylic acid) binder for silicon electrode manufacture

A binder solution for manufacturing silicon-based anodes useful for lithium-ion electrochemical cells is described herein. The binder solution comprises a poly(carboxylic acid) binder dissolved in a mixed solvent system comprising an amide solvent of Formula I, as described herein, and a second solvent which can be water and/or an organic solvent. The binder preferably comprises poly(acrylic acid). The mixed solvent system comprises about 10 to about 99 vol % of the amide solvent of Formula I. The binder solution is utilized as a solvent for a slurry of silicon-containing particles for preparing a silicon-containing electrode. The slurries made with the mixed solvent systems have higher viscosity and are more stable than slurries containing the same concentrations of silicon particle, carbon particles, and binder in water as the sole solvent.

Zhang, Lu↗

Solvents and slurries comprising a poly(carboxylic acid) binder for silicon electrode manufacture

An silicon-containing electrode is formed by coating a silicon-containing slurry onto a conductive current collector. The slurry comprises a binder solution comprising a poly(carboxylic acid) binder dissolved in a mixed solvent system comprising an amide solvent of Formula I, as described herein, and a second solvent which can be water and/or an organic solvent. The binder preferably comprises poly(acrylic acid). The mixed solvent system comprises about 10 to about 99 vol % of the amide solvent of Formula I. The binder solution is utilized as a solvent for a slurry of silicon-containing particles for preparing the silicon-containing electrode. The slurries comprising the mixed solvent system have higher viscosity and are more stable than slurries containing the same concentrations of silicon particles, carbon particles, and binder in water as the sole solvent.

Zhang, Lu↗

Direct comparisons of X-ray scattering and atomistic molecular dynamics simulations for precise acid copolymers and ionomers

Designing acid- and ion-containing polymers for optimal proton, ion, or water transport would benefit profoundly from predictive models or theories that relate polymer structures with ionomer morphologies. Recently, atomistic molecular dynamics (MD) simulations were performed to study the morphologies of precise poly(ethylene-co-acrylic acid) copolymer and ionomer melts. Here, we present the first direct comparisons between scattering profiles, I(q), calculated from these atomistic MD simulations and experimental X-ray data for 11 materials. This set of precise polymers has spacers of exactly 9, 15, or 21 carbons between acid groups and has been partially neutralized with Li, Na, Cs, or Zn. In these polymers, the simulations at 120 °C reveal ionic aggregates with a range of morphologies, from compact, isolated aggregates (type 1) to branched, stringy aggregates (type 2) to branched, stringy aggregates that percolate through the simulation box (type 3). Excellent agreement is found between the simulated and experimental scattering peak positions across all polymer types and aggregate morphologies. The shape of the amorphous halo in the simulated I(q) profile is in excellent agreement with experimental I(q). We found that the modified hard-sphere scattering model fits both the simulation and experimental I(q) data for type 1 aggregate morphologies, and the aggregate sizes and separations are in agreement. Given the stringy structure in types 2 and 3, we develop a scattering model based on cylindrical aggregates. Both the spherical and cylindrical scattering models fit I(q) data from the polymers with type 2 and 3 aggregates equally well, and the extracted aggregate radii and inter- and intra-aggregate spacings are in agreement between simulation and experiment. Furthermore, these dimensions are consistent with real-space analyses of the atomistic MD simulations. By combining simulations and experiments, the ionomer scattering peak can be associated with the average distance between branches of type 2 or 3 aggregates. Furthermore, this direct comparison of X-ray scattering data to the atomistic MD simulations is a substantive step toward providing a comprehensive, predictive model for ionomer morphology, gives substantial support for this atomistic MD model, and provides new credibility to the presence of stringy, branched, and percolated ionic aggregates in precise ionomer melts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Renewable Enhanced Feedstocks for Advanced Biofuels and Bioproducts (REFABB)

The basic concept of the REFABB project was that by genetically engineering the biomass crop switchgrass to produce a natural polymer PHB, which is readily broken down by heating (thermolysis) into the chemical building block crotonic acid, sufficient additional economic value would be added for the grower and processor to make it an attractive business at small scale. Processes for using thermolysis to upgrade biomass to densified pellets (char) or bio-oil are well known and require low capital investment similar to a corn ethanol facility. Several smaller thermolysis plants would then supply the densified biomass, which is easier to handle and transport to a centralized biorefinery where it would be used as the feedstock. Crotonic acid is not by itself a large volume commodity chemical, however, the project demonstrated that it can be used as a feedstock to produce a number of large volume chemicals including butanol which itself is a biofuel target. In effect the project would try to address three key technology barriers, feedstock logistics, feedstock supply and cost effective biomass conversion. This project adds to our understanding of the potential for future biomass biorefineries in two main areas. The first addressed in Task A was the importance and potential of developing an advanced value added biomass feedstock crop. In this Task several novel genetic engineering technologies were demonstrated for the first time. One important outcome was the identification of three novel genes which when re-introduced into the switchgrass plants had a remarkable impact on increasing the biomass yield based on dramatically increasing photosynthesis. These genes also turned out to be critical to increasing the levels of PHB in switchgrass by enabling the plants to fix carbon fast enough to support both plant growth and higher levels of the polymer. Challenges in the critical objective of Task B, demonstrating conversion of the PHB in biomass to crotonic acid at over 90% yield, demonstrated the need to consider up-front the limitations of trying to adopt existing equipment to a task for which subsequent basic research studies indicated it was not suitable. New information was developed in the most complex of the chemical conversions studied, advanced catalysis to make acrylic acid, a chemical used widely to make paints, and this was published in a scientific journal. In regard to the technical effectiveness, the crop science aspects were for the most part remarkably effective in addressing the underlying objectives indicating the soundness of the technical approach. With time, it should be possible to fully develop the advanced biomass biorefinery feedstock. Challenges within the thermolysis step to recover crotonic acid meant that by the end of the project we were not able to demonstrate an economic case based on data from scaled up equipment. Solving this will take further research and development work. As a general statement, the broadest public good is in demonstrating the value of funding a very unique approach to the complex problem of enabling large-scale biomass biorefineries which resulted in significant progress towards the ultimate goal and a clearer understanding of the technical hurdles remaining. Perhaps not surprisingly, some of the broader benefits to the public come from the use of the REFABB project innovations in areas unrelated to the initial objective. It is worth highlighting the breakthrough developments in identifying three single global regulator genes which can be engineered into plants to dramatically increase photosynthesis and carbon capturing ability. These genes have tremendous potential for use in major food crops, in particular corn to enhance grain yield and based on recent findings, increase the root density, a critical key to increasing carbon sequestration in agriculture and improving the sustainability of global food and biofuel production.

09 BIOMASS FUELS↗

An Organic Acid Based Counter Selection System for Cyanobacteria

Cyanobacteria are valuable organisms for studying the physiology of photosynthesis and carbon fixation, as well as metabolic engineering for the production of fuels and chemicals. This work describes a novel counter selection method for the cyanobacterium Synechococcus sp. PCC 7002 based on organic acid toxicity. The organic acids acrylate, 3-hydroxypropionate, and propionate were shown to be inhibitory towards Synechococcus sp. PCC 7002 and other cyanobacteria at low concentrations. Inhibition was overcome by a loss of function mutation in the gene acsA, which is annotated as an acetyl-CoA ligase. Loss of AcsA function was used as a basis for an acrylate counter selection method. DNA fragments of interest were inserted into the acsA locus and strains harboring the insertion were isolated on selective medium containing acrylate. This methodology was also used to introduce DNA fragments into a pseudogene, glpK. Application of this method will allow for more advanced genetics and engineering studies in Synechococcus sp. PCC 7002 including the construction of markerless gene deletions and insertions. The acrylate counter-selection could be applied to other cyanobacterial species where AcsA activity confers acrylate sensitivity (e.g. Synechocystis sp. PCC 6803).

59 BASIC BIOLOGICAL SCIENCES↗

Effects of Different Surfactants on Structural, Tribological and Electrical Properties of Pulsed Electro-Codeposited Cu-ZrO{sub 2} Composite Coatings

Cu-ZrO{sub 2} composite coating was synthesized by pulse electrodeposition from an acidic sulfate electrolyte dispersed with nano-sized ZrO{sub 2} particles. Effects of different surfactants in different amounts on the codeposition and distribution of ZrO{sub 2} particles in the copper matrix, surface-mechanical (hardness and wear) and electrical (conductivity) properties of developed composite coatings have been thoroughly investigated. Sodium dodecyl sulfate (SDS), poly acrylic acid (PAA) and glucose have been added in the electrolyte in different concentrations as anionic, polymeric and nonionic surfactants. Obtained experimental results confirmed that addition of SDS up to 1 g/L improves the amount of codeposited ZrO{sub 2} particles in the copper matrix and surface-mechanical properties of the nanocomposite coatings. But, in case of PAA- and glucose-assisted coatings, highest amount of ZrO{sub 2} codeposition was observed in 0.5 g/L PAA and 20 g/L glucose-assisted coatings, which in turn affected the mechanical properties. Surface-mechanical properties were found to be affected by coating matrix morphology and crystallographic orientation along with embedded ZrO{sub 2} particle content. Electrical conductivity of all the deposits not only depends upon the codeposition of ZrO{sub 2} particles in the matrix but also on the microstructure and crystallographic orientation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Carbodiimide‐Driven Toughening of Interpenetrated Polymer Networks

Abstract Recent work has demonstrated that temporary crosslinks in polymer networks generated by chemical “fuels” afford materials with large, transient changes in their mechanical properties. This can be accomplished in carboxylic‐acid‐functionalized polymer hydrogels using carbodiimides, which generate anhydride crosslinks with lifetimes on the order of minutes to hours. Here, the impact of the polymer network architecture on the mechanical properties of transiently crosslinked materials was explored. Single networks (SNs) were compared to interpenetrated networks (IPNs). Notably, semi‐IPN precursors that give IPNs on treatment with carbodiimide give much higher fracture energies (i.e., resistance to fracture) and superior resistance to compressive strain compared to other network architectures. A precursor semi‐IPN material featuring acrylic acid in only the free polymer chains yields, on treatment with carbodiimide, an IPN with a fracture energy of 2400 J/m 2 , a fourfold increase compared to an analogous semi‐IPN precursor that yields a SN. This resistance to fracture enables the formation of macroscopic complex cut patterns, even at high strain, underscoring the pivotal role of polymer architecture in mechanical performance.

Rajawasam, Chamoni W. H.↗

Carbodiimide‐Driven Toughening of Interpenetrated Polymer Networks

Abstract Recent work has demonstrated that temporary crosslinks in polymer networks generated by chemical “fuels” afford materials with large, transient changes in their mechanical properties. This can be accomplished in carboxylic‐acid‐functionalized polymer hydrogels using carbodiimides, which generate anhydride crosslinks with lifetimes on the order of minutes to hours. Here, the impact of the polymer network architecture on the mechanical properties of transiently crosslinked materials was explored. Single networks (SNs) were compared to interpenetrated networks (IPNs). Notably, semi‐IPN precursors that give IPNs on treatment with carbodiimide give much higher fracture energies (i.e., resistance to fracture) and superior resistance to compressive strain compared to other network architectures. A precursor semi‐IPN material featuring acrylic acid in only the free polymer chains yields, on treatment with carbodiimide, an IPN with a fracture energy of 2400 J/m 2 , a fourfold increase compared to an analogous semi‐IPN precursor that yields a SN. This resistance to fracture enables the formation of macroscopic complex cut patterns, even at high strain, underscoring the pivotal role of polymer architecture in mechanical performance.

Rajawasam, Chamoni W. H.↗

Effects of Non-Electrostatic Intermolecular Interactions on the Phase Behavior of pH-Sensitive Polyelectrolyte Complexes

Polyelectrolyte complexes (PECs) offer enormous material tunability and desirable functionalities, and consequently have found broad utility in biomedical and material industries. While poly(acrylic acid) (PAA) and poly( allylamine hydrochloride) (PAH) are a commonly used pairing, various aspects of the phase behavior of PAA-PAH complexes have not been sufficiently quantified. In this work, we present a comprehensive experimental study depicting the binodal phase boundaries for the PAA-PAH complexes prepared under acidic, neutral, and basic conditions using thermogravimetric analysis, turbidimetry, and optical microscopy. Under neutral and basic conditions, phase behaviors of the complexes were largely similar to one another and followed general expectations of PEC phase behavior, except for unusually high resistance to disruption of the complex with added salt. Stable complexes are observed up to 4 M NaCl concentrations. Under acidic conditions, strikingly different phase behaviors of the PAA-PAH complexes were observed. The polymer content in the complex phase increased initially, followed by an expected decrease as salt was added to the complexes. This behavior may result from a combination of associative phase separation of PAA and PAH chains, influenced by electrostatic interactions, and segregative phase separation, which can be ascribed to the influence of a combination of the hydrophobic interactions of the aliphatic polymer backbone and the interpolymer hydrogen bonding of unionized acrylic monomer units. Our systematic investigations over a range of pH detailing these discrepancies in the PAA-PAH phase behavior are expected to clarify the inconsistencies among the reports in the literature and provide the material design strategies for practical use of the PAA-PAH complexes and multilayer assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monomers with a High Refraction Index Based on Acryloyl Derivatives of Spirocyclic Piperidin-4-One Thioacetals

Dithioazaspiroheterocyclic derivatives are synthesized by condensing dithiols with piperidin-4-one in the presence of catalytic amounts of Lewis acids. Acrylic dithioazaspiroheterocyclic derivatives are obtained by the reaction with acryloyl chloride. The polymerization of monomers yields transparent polymer films of optical quality. The refractive indices for the synthesized monomers and polymers are in the range of n = 1.59–1.64.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

High yield production of 3-hydroxypropionic acid using Issatchenkia orientalis

Biomanufacturing provides a more sustainable alternative to fossil-based chemical manufacturing. 3-Hydroxypropionic acid (3HP) is a top Department of Energy value-added chemical and precursor to bioplastics, yet cost-effective microbial production remains elusive. Here, we establish the acid-tolerant yeast Issatchenkia orientalis as a robust host for low-pH 3HP biosynthesis. Genome-scale modeling identifies the β-alanine pathway as optimal, offering the highest theoretical yield and lowest oxygen requirement. Thermodynamic analysis confirms its favorability under acidic conditions. Using sequence similarity network analysis, we discover highly active aspartate 1-decarboxylase (PAND), β-alanine-pyruvate aminotransferase (BAPAT), and 3HP dehydrogenase (YDFG), which significantly improve the pathway efficiency. Next, to further elevate the production, pathway optimization through multi-copy PAND integration, byproduct elimination (knockouts of pyruvate decarboxylase and glycerol-3-phosphate dehydrogenase), and reinforcement of aspartate flux by overexpression of pyruvate carboxylase and aspartate amino transferase improves the titer to 29 g/L in shake flasks. Fed-batch fermentation at pH 4 with low-cost corn steep liquor medium further increases the production to 92 g/L with 0.7 g/g yield and 0.55 g/L/h productivity. Techno-economic analysis indicates that such performance could potentially enable a financially viable process for sustainable acrylic acid production. This work establishes I. orientalis as a next-generation platform for cost-effective 3HP production and paves the way toward industrial commercialization.

Biotechnology↗

3-Hydroxypropionic acid recovery from fermentation broth through novel downstream processing: Technoeconomic analysis

This study develops and validates a simplified, fully solvent-free downstream processing (DSP) strategy for high-purity recovery of 3-hydroxypropionic acid (3-HP) from real fermentation broth containing 62.3 g/L of 3-HP. Optimized activated carbon treatment achieved 98% color removal, while Amberlite IRA-67 was operated at pH 4.5 and 30 °C to minimize product loss. This is the first integrated demonstration of a fully solvent-free DSP enabling recovery of bio-based 3-HP as both a solid sodium salt and a concentrated aqueous solution, supported by techno-economic analysis. At lab scale, the process achieved 77.3% recovery of sodium 3-HP with 83.2% (w/w) purity and produced a 30% (w/v) aqueous solution. Techno-economic analysis yielded minimum selling prices of $0.551/kg for the solution and $0.892/kg for the salt, both below target thresholds for cost-competitive bio-acrylic acid production. Overall, these results demonstrate an efficient, scalable, and economically viable industrial pathway for 3-HP recovery.

09 BIOMASS FUELS↗