Development and fabrication of advanced design rate gyro monthly progress report no. 1, 19 jun. - 31 jul. 1963
Fluid tube gyroscope and signal preamplifier
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Fluid tube gyroscope and signal preamplifier
A discussion is presented on the coupling of computational analysis and experiment. It is believed that this coupling is critical in developing new aerodynamic insights. Additionally, new methods for analyzing and interpreting data are discussed. These methods need to be developed in small-scale research studies and then applied to large-scale technology programs. The specific objectives of this program are threefold: (1) provide definitive data sets for the assessment of numerical simulations to the Navier-Stokes equations; (2) incorporate advanced instrumentation to measure the spatial and temporal structure of fluid flows; and (3) develop true parallelism between computational and experimental research using the 'scientific workstation' concept. The discussion is presented in viewgraph form.
A core fluids and heat transfer model has been developed for the prismatic high temperature gas reactor in support of the US NRC Next Generation Nuclear Plant (NGNP) evaluation model. The core fluids modeling relies on a subchannel approach in which the primary coolant flow path through the core region and vertical in-core and ex-core gaps can be modeled as individual subchannels. These subchannels are connected together to represent a three dimensional reactor. An initial validation calculation for the core fluids model has been performed using data available in literature for bypass flow. The predicted bypass flow was within 2.6% of the value reported in the literature. The core level heat transfer model is based on a triangular finite volume method, where the base triangle is one sixth of the prismatic block. In order to improve the spatial accuracy at this level, a triangular refinement method was also implemented. The fuel compact temperature is calculated by a cylindrical conduction model which is implicitly coupled to the triangular core level model. The preliminary verification of the model was performed by comparing AGREE to a finite element code COMSOL by analyzing the MHTGR core heat transfer. Further verification and validation is currently an ongoing effort. (authors)
Cryogenic Storage &Transfer are enabling propulsion technologies in the direct path of nearly all future human or robotic missions; It is identified by NASA as an area with greatest potential for cost saving; This proposal aims at resolving fundamental scientific issues behind the engineering development of the storage tanks; We propose to use the ISS lab to generate & collect archival scientific data:, raise our current state-of-the-art understanding of transport and phase change issues affecting the storage tank cryogenic fluid management (CFM), develop and validate state-of-the-art CFD models to innovate, optimize, and advance the future engineering designs
Under the support of DOE-NE’s Nuclear Energy Advanced Modeling and Simulation (NEAMS), an effort had been pursued to support High Temperature Gas-cooled Reactors (HTGR) technology development and its modeling and simulation needs. There was a particular need for advanced modeling & simulation tools to predict thermal-fluid behavior in the nuclear reactor primary system, especially the core and lower and upper plena, during safety-related transients. In this report, two main such activities were presented: 1) system level HTGR simulations using system analysis code SAM for both normal operating and accident conditions; and 2) three-dimensional (3D) computational fluid dynamics (CFD) simulations on Deteriorated Turbulent Heat Transfer (DTHT) of interest to HTGR transients, including code benchmark and closure correlation development. In this work, Modular High Temperature Gas-cooled Reactor (MHTGR) full loop simulations were performed using System Analysis Module (SAM) code. Two approaches were used to model the reactor core; (i) unit-cell or lumped parameter model, and (ii) detailed ring model, to address the different needs under different reactor conditions. Aside from the core model changes other reactor components in the primary system, such as upper/lower plenum, heat exchanger and blower etc, were kept the same. In the unit-cell core model, the lumped parameter approach was used to model the coolant channels and the heat structures using 1-D and 2-D components, respectively. The fuel assembly heat structure was modeled based on unit-cell thickness approximation. In normal and controlled operating conditions, the calculated maximum temperatures for both coolant and heat structures were within the designed limits. The unit-cell model is, however, not able to capture the radial heat conduction through fuel assemblies, which is the dominant heat transfer mechanism during accident transients, such as pressurized conduction cooldown (PCC) event. To address this modeling challenge, ring models were developed. A simplified ring model was developed first. In this simplified model, the active core was simulated with 9 circular rings consists of 6 rings for homogenized fuel heat structure and 3 rings for gas coolant. It was quickly found that this model gives rather large simulation error as it was not able to correctly capture the solid structure representative geometries. A detailed ring model was developed to address this issue. The active core was simulated with 99 circular rings consists of 66 rings for homogenized fuel heat structure and 33 rings for gas coolant. In both ring models, six additional rings were included to represent inner reflector, outer reflector, core barrel, Reactor Pressure Vessel (RPV), RPV coolant channel, and Reactive Cavity Cooling System (RCCS). The detailed ring model was applied in two different SAM simulations; (i) normal operating conditions, and (ii) accident scenarios (more specifically, PCC event), for MHTGR design. In both simulations, the SAM calculated results for coolant and heat structure temperatures were within the reactor designed limits. The newly proposed detailed ring model approach in this work has proved to be a promising method to address the challenging modeling and simulation needs in the MHTGR design. As demonstrated in this work, this model was suitable for MHTGR simulations under both normal and accident conditions. Apart from the SAM model development for gas-cooled reactors, 3D Computational Fluid Dynamics (CFD) models were developed and validated with relaminarized Deteriorated Turbulent Heat Transfer (DTHT) MIT benchmark test. Two different CFD codes, Nek5000 and STAR-CCM+, were used for this benchmark activity. Compared with MIT data, Nek5000 shows very good agreement between its simulated and experimentally measured wall temperatures. In contrast, STAR-CCM+ under-predicted wall temperature due to over predicted turbulence in the wall region. The Nek5000 code was also used to develop wall-heat transfer correlations for laminar flow in cylindrical tube. Several simulations were performed for various Reynolds flow and wall heat fluxes. Significant deviations were found when compared the predicted heat transfer coefficient and the Sieder-Tate correlation. A new set of heat transfer correlation was proposed for laminar flow which is valid for 400<Re<2000.
Pumped loop radiators are commonly used to reject large amounts of heat associated with crewed systems. The State-of-the-Art (SOA) for crewed systems is represented by the International Space Station (ISS) External Heat Rejection System (HRS) Thermal Radiators. The ISS HRS utilizes a manifold design with many parallel flow paths coupled to thin face-sheets and low viscosity ammonia as the working fluid, which may not be preferred due to toxicity concerns. Although contemporary coolant choices provide lower freezing points, the current SOA design may not be well positioned to provide both sufficient heat transfer and manageable pressure drop due to very different fluid thermo-physical properties, including higher viscosities. The planned development of an advanced single phase, pumped loop thermal radiator utilizing a serpentine flow path with high thermally conductive face-sheets is presented herein.
Bibliography of publications on bioscience, physical space science, electronics, chemical and electric propulsion, fluid physics, and planetary and interplanetary missions
Topics considered include advances in finite difference techniques for computational fluid dynamics, the spectral element methods for the incompressible Navier-Stokes equations, a review of recent developments in time integration, and advances and trends in element-by-element techniques. Also examined are the algebraic multigrid methods applied to problems in computational structural mechanics, grid generation for the solution of partial differential equations, advances in adaptive improvements, and new computing systems and their impact on computational mechanics.
The recently developed Gas Kinetic Method (GKM) for computing fluid flow is enhanced with advanced reconstruction (interpolation) schemes to enable direct simulations of highly compressible transition and turbulence fields. Variants of Weighted Essentially Non-Oscillatory (WENO) reconstruction schemes of different orders of accuracy are implemented and examined along with more elementary van Leer method. The competing schemes are evaluated for their accuracy, efficiency and numerical stability. The computed results are compared against the Rapid Distortion Theory for the case of compressible shear turbulence and 'pressure-released' Burgers solution. In the case of decaying isotropic turbulence, the efficacy of the reconstruction schemes is evaluated by comparison against a 'gold standard' high-resolution simulation. The capabilities of the reconstruction schemes to capture linear, non-linear, pressure-released and viscous flow physics as well as solenoidal and dilatational features of the flow fields are established in isolation and combination. The most suitable WENO variant for integration with GKM is identified. Another important outcome of the study is the finding that temperature-interpolation is superior to energy-interpolation in avoiding negative temperatures arising due to the Gibbs phenomenon. Overall, this work advances the applicability of kinetic theory based GKM to a wider range of high Mach number flow physics.
This assessment explores the current analysis methodologies of various external and MOOSE-based tools available at the Idaho National Laboratory to model pebble bed reactor multiphysics phenomena. The study involves three MOOSE-based, coupled codes: 1) MAMMOTH for reactor physics, 2) Rattlesnake for neutron transport and 3) Pronghorn for thermal fluids and strongly coupled conjugate heat transfer. These advanced tools are being developed under DOE-NE’s Nuclear Energy Advanced Modeling and Simulation program (NEAMS). They currently contain a collection of advanced modeling capabilities that allow high-fidelity simulations of advanced reactor concepts including gas and fluoride-salt cooled pebble bed reactors. Software development of these tools follows NQA-1 standards ensuring software quality that many of the currently deployed legacy codes lack. In this work, the MAMMOTH Pronghorn tools are compared to the legacy codes PEBBED-THERMIX-KONVEK. The external codes in use are LAMMPS for pebble mechanics and Serpent for cross section preparation. The coupling under MOOSE enables significant flexibility for modern engineering tools since MOOSE applications can be seamlessly coupled with various levels of resolution. This report focuses on low-resolution (r-z) and midresolution (3-D) homogenized geometries. The high-resolution Pebble Tracking Transport solution is not pursued herein and is postponed to future work. The results from this assessment show that the new MOOSE-based tools compare well with the results from legacy tools (r-z) and produce reasonable accuracy limited by the methods in the legacy tools. In the 3-D studies, the PJFNK-SPH methodology available in MAMMOTH allows the reproduction of Monte Carlo results with a transport-corrected diffusion solution. This has implications for the coupled solutions since without the SPH correction the temperature coefficient of reactivity is under-predicted and leads to lower temperature feedback and a significantly higher eigenvalue showing a difference of 2000 pcm.
A preliminary design of an experiment to demonstrate and evaluate long-term cryogenic fluid storage and transfer technologies has been performed. This Long-Term Cryogenic Fluid Storage (LTCFS) experiment is a Technology Development Mission (TDM) experiment proposed by the NASA Lewis Research Center to be deployed on the Initial Operational Capability (IOC) space station. Technologies required by future orbital cryogenic systems such as Orbital Transfer Vehicles (OTV's) were defined, and critical technologies requiring demonstration were chosen to be included in the experiment. A three-phase test program was defined to test the following types of technologies: (1) Passive Thermal Technologies; (2) Fluid Transfer Technologies; and (3) Active Refrigeration Technologies. The development status of advanced technologies required for the LTCFS experiment is summarized, including current, past and future programs.
The motivation for cryogenic wind tunnels originated during the 1960s from an internationally recognized need for a high Reynolds number test capability based on experiences with preflight predictions of aerodynamic characteristics and an anticipated need in support of research and development for future aerospace vehicle systems. More specifically, the motivation for a flight (or near flight) Reynolds number ground test facility was captured in the foreword to reference 1 which states:“...AGARD held a Specialists’ Meeting in Paris on ‘Transonic Aerodynamics’ in recognition of the fact that the absence of adequate theoretical methods and wind tunnels of high enough Reynolds number had already led to costly shortcomings in the transonic performance of certain combat and transport aircraft.” Preflight prediction of flight characteristics is a necessary process for the developer of any aerospace vehicle, and introduces significant risk to the success of the vehicle. Whether the vehicle customer is commercial or governmental, the final full-scale vehicle must meet certain requirements to be certified as safe, and certain performance requirements to be economically successful. Aircraft companies strive to know the flight characteristics and performance of their vehicle with high confidence prior to flight, thus enabling optimal design trades and elimination of any costly modifications to the aircraft during and after initial flight testing. The problems of predicting flight characteristics across the full flight envelope prior to flight have been and continue to be challenging. Much has changed since the US National Transonic Facility (NTF) became operational in the 1980s, followed by the European Transonic Windtunnel (ETW) in 1990s, not the least of which has been the advancement and positive impact of computational fluid dynamics (CFD) on aircraft design and development. Today, the need for integrated CFD and ground-based high Reynolds number test and evaluation capability remains as aerodynamics will always be central to defining an aircraft directly as well as providing critical input to other disciplines. Today the economic stakes of being surprised during flight tests are higher than ever. This oral-only presentation describes the past, current, and future role of high Reynolds number aerodynamic testing in aerospace vehicle design and development. Discussion of relevant flow physics, past experiences with preflight prediction, and future needs, challenges, and opportunities is included. 1.“Facilities and Techniques for Aerodynamic Testing at Transonic Speeds and High Reynolds Number,” AGARD CP-83-71, 1971.
The Vented Tank Resupply Experiment (VTRE) Program is a NASA In-Space Technology Experiments Program (IN-STEP) that will develop, and fly a small, low cost space experiment to investigate, develop, and acquire needed data to extend and advance the technology of capillary vane fluid management devices to applications requiring direct venting of gas from tanks in low-gravity. GAS venting may be required for control of pressure, or to allow low-g fill of a tank with liquid while holding a constant tank back pressure by gas venting. Future space applications requiring these fluid management capabilities include both cryogenic and Earth storable fluid systems. The experiment is planned as a Shuttle Hitchhiker payload, and will be developed around two transparent tanks equipped with capillary vane devices between which a test liquid can be transferred. Experiments will be conducted for vented transfer, direct venting, stability of liquid positioning to accelerations within and significantly above the design values, and fluid reorientation by capillary wicking of liquid into the vane device following intentional liquid upset.
This paper summarizes the technical development and validation of a multiphase computational fluid dynamics (CFD) numerical method using the volume-of-fluid (VOF) model and a Lagrangian tracking model which can be employed to analyze general multiphase flow problems with free surface mechanism. The gas-liquid interface mass, momentum and energy conservation relationships are modeled by continuum surface mechanisms. A new solution method is developed such that the present VOF model can be applied for all-speed flow regimes. The objectives of the present study are to develop and verify the fractional volume-of-fluid cell partitioning approach into a predictor-corrector algorithm and to demonstrate the effectiveness of the present approach by simulating benchmark problems including laminar impinging jets, shear coaxial jet atomization and shear coaxial spray combustion flows.
Current and future turbomachinery requires advanced seal configurations to control leakage, inhibit mixing of incompatible fluids and to control the rotodynamic response. In recognition of a deficiency in the existing predictive methodology for seals, a seven year effort was established in 1990 by NASA's Office of Aeronautics Exploration and Technology, under the Earth-to-Orbit Propulsion program, to develop validated Computational Fluid Dynamics (CFD) concepts, codes and analyses for seals. The effort will provide NASA and the U.S. Aerospace Industry with advanced CFD scientific codes and industrial codes for analyzing and designing turbomachinery seals. An advanced 3D CFD cylindrical seal code has been developed, incorporating state-of-the-art computational methodology for flow analysis in straight, tapered and stepped seals. Relevant computational features of the code include: stationary/rotating coordinates, cylindrical and general Body Fitted Coordinates (BFC) systems, high order differencing schemes, colocated variable arrangement, advanced turbulence models, incompressible/compressible flows, and moving grids. This paper presents the current status of code development, code demonstration for predicting rotordynamic coefficients, numerical parametric study of entrance loss coefficients for generic annular seals, and plans for code extensions to labyrinth, damping, and other seal configurations.
The US Department of Energy s National Nuclear Security Administration (NNSA) is participating in the Global Threat Reduction Initiative to reduce and protect vulnerable nuclear and radiological materials located at civilian sites worldwide. As an integral part of one of NNSA s subprograms, Reduced Enrichment for Research and Test Reactors, HFIR is being converted from the present HEU core to a low enriched uranium (LEU) core with less than 20% of U-235 by weight. Because of HFIR s importance for condensed matter research in the United States, its conversion to a high-density, U-Mo-based, LEU fuel should not significantly impact its existing performance. Furthermore, cost and availability considerations suggest making only minimal changes to the overall HFIR facility. Therefore, the goal of this conversion program is only to substitute LEU for the fuel type in the existing fuel plate design, retaining the same number of fuel plates, with the same physical dimensions, as in the current HFIR HEU core. Because LEU-specific testing and experiments will be limited, COMSOL Multiphysics was chosen to provide the needed simulation capability to validate against the HEU design data and previous calculations, and predict the performance of the proposed LEU fuel for design and safety analyses. To achieve it, advanced COMSOL-based multiphysics simulations, including computational fluid dynamics (CFD), are being developed to capture the turbulent flows and associated heat transfer in fine detail and to improve predictive accuracy [2].
Computational fluid dynamics (CFD) and other advanced modeling and simulation (M&S) methods are increasingly relied on for predictive performance, reliability and safety of engineering systems. Analysts, designers, decision makers, and project managers, who must depend on simulation, need practical techniques and methods for assessing simulation credibility. The AIAA Guide for Verification and Validation of Computational Fluid Dynamics Simulations (AIAA G-077-1998 (2002)), originally published in 1998, was the first engineering standards document available to the engineering community for verification and validation (V&V) of simulations. Much progress has been made in these areas since 1998. The AIAA Committee on Standards for CFD is currently updating this Guide to incorporate in it the important developments that have taken place in V&V concepts, methods, and practices, particularly with regard to the broader context of predictive capability and uncertainty quantification (UQ) methods and approaches. This paper will provide an overview of the changes and extensions currently underway to update the AIAA Guide. Specifically, a framework for predictive capability will be described for incorporating a wide range of error and uncertainty sources identified during the modeling, verification, and validation processes, with the goal of estimating the total prediction uncertainty of the simulation. The Guide's goal is to provide a foundation for understanding and addressing major issues and concepts in predictive CFD. However, this Guide will not recommend specific approaches in these areas as the field is rapidly evolving. It is hoped that the guidelines provided in this paper, and explained in more detail in the Guide, will aid in the research, development, and use of CFD in engineering decision-making.
Previous spacecraft heat rejection systems have been tailored to a specific spacecraft and a specific mission. Many different panel designs, fluids, and control methods have been used with no significant degree of commonality. For future spacecraft, it is desirable to have heat rejection systems which can accommodate widely varying loads and have a high degree of commonality to minimize development requirements. A modular radiator system which satisfies this requirement and is adaptable to a variety of future vehicles and missions is described. A test program with two modular panels connected in several flow arrangements, which are representative of candidate shuttle orbiter and other future spacecraft applications, is described.