Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Syntheses, crystal structures and Si solubilities of new layered carbides Zr{sub 2}Al{sub 4}C{sub 5} and Zr{sub 3}Al{sub 4}C{sub 6}

Two types of new ternary carbides, Zr{sub 2}Al{sub 4}C{sub 5} and Zr{sub 3}Al{sub 4}C{sub 6}, have been synthesized and characterized by X-ray powder diffraction. The crystal structures were refined from laboratory X-ray powder diffraction data (CuK{alpha}{sub 1}) using the Rietveld method. These carbides form a homologous series with the general formula (ZrC){sub m}Al{sub 4}C{sub 3} (m=2 and 3). The crystal structures can be regarded as intergrowth structures where the Al{sub 4}C{sub 3}-type [Al{sub 4}C{sub 4}] layers are the same, while the NaCl-type [Zr{sub m}C{sub m+1}] layers increase in thickness with increasing m value. The new carbides are most probably the end members of continuous solid-solutions (ZrC){sub m}[Al{sub 4-x}Si{sub x}]C{sub 3} with 0{<=}x{<=}0.44. - Graphical abstract: Crystal structures of new layered carbides (ZrC){sub 2}Al{sub 4}C{sub 3} and (ZrC){sub 3}Al{sub 4}C{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal and electronic structures, luminescence properties of Eu{sup 2+}-doped Si{sub 6-z}Al{sub z}O{sub z}N{sub 8-z} and M{sub y}Si{sub 6-z}Al{sub z-y}O{sub z+y}N{sub 8-z-y} (M=2Li, Mg, Ca, Sr, Ba)

The crystal structure, electronic structure, and photoluminescence properties of Eu{sub x}Si{sub 6-z}Al{sub z-x}O{sub z+x}N{sub 8-z-x} (x=0-0.1, 0<z<1) and Eu{sub x}M{sub y}Si{sub 6-z}Al{sub z-x-y}O{sub z+x+y}N{sub 8-z-x-y} (M=2Li, Mg, Ca, Sr, Ba) have been studied. Single-phase Eu{sub x}Si{sub 6-z}Al{sub z-x}O{sub z+x}N{sub 8-z-x} can be obtained in very narrow ranges of x{<=}0.06 (z=0.15) and z<0.5 (x=0.3), indicating that limited Eu{sup 2+} ions can be incorporated into nitrogen-rich Si{sub 6-z}Al{sub z}O{sub z}N{sub 8-z}. The Eu{sup 2+} ion is found to occupy the 2b site in a hexagonal unit cell (P6{sub 3}/m) and directly connected by six adjacent nitrogen/oxygen atoms ranging 2.4850-2.5089 A. The calculated host band gaps by the relativistic DV-X{alpha} method are about 5.55 and 5.45 eV (without Eu{sup 2+} 4f5d levels) for x=0 and 0.013 in Eu{sub x}Si{sub 6-z}Al{sub z-x}O{sub z+x}N{sub 8-z-x} (z=0.15), in which the top of the 5d orbitals overlap with the Si-3s3p and N-2p orbitals within the bottom of the conduction band of the host. Eu{sub x}Si{sub 6-z}Al{sub z-x}O{sub z+x}N{sub 8-z-x} shows a strong green emission with a broad Eu{sup 2+} band centered at about 530 nm under UV to near-UV excitation range. The excitation and emission spectra are hardly modified by Eu concentration and dual-doping ions of Li and other alkaline-earth ions with Eu. Higher Eu concentrations can significantly quench the luminescence of Eu{sup 2+} and decrease the thermal quenching temperature. In addition, the emission spectrum can only be slightly tuned to the longer wavelengths ({approx}529-545 nm) by increasing z within the solid solution range of z<0.5. Furthermore, the luminescence intensity of Eu{sub x}Si{sub 6-z}Al{sub z-x}O{sub z+x}N{sub 8-z-x} can be improved by increasing z and the dual-doping of Li and Ba. - Graphical abstract: Excitation and emission spectra of Eu{sub x}Si{sub 6-z}Al{sub z-x}O{sub z+x}N{sub 8-z-x} with the project of a 2x2x2 supercell crystal structure viewed along (001), in which red spheres are the Eu atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Al–Al{sub 4}C{sub 3} nanocomposites produced by mechanical milling

In this work, a mixture of Al–C–Al{sub 4}C{sub 3} nanopowder previously synthesized by mechanical milling and subsequent thermal treatment was used to reinforce the Al matrix. The nanocomposites were fabricated via high-energy ball milling and subsequent sintering process for different periods of time at 550 °C. Hardness and compression tests were performed to evaluate the mechanical properties of the nanocomposites in the as-milled and sintered conditions. According to the results the reinforcement located in the grain boundaries is responsible for the brittle behavior observed in the nanocomposites during the compression test. The combined effect of sintering and precipitation mechanisms produced an evident increase of the strength of the Al matrix at a relatively short sintering time. By using the Rietveld method the crystallite size and microstrain measurements were determined and correlated with the microhardness values. For the proper characterization of the nanoparticles present in the Al matrix, atomic force microscopy and high resolution electron microscopy were used. - Highlights: • Nanostructured Al{sub 4}C{sub 3} reinforcement was fabricated via mechanical milling and heat treatment. • We found a significant increase of the mechanical properties at short sintering times. • The formation of Al{sub 4}C{sub 3} with during sintering time restricted the excessive growth of the crystallite. • Al{sub 4}C{sub 3} located in the grain boundaries causes brittle fracture observed in compression tests. • There is a correlation between, crystallite size and microstrain values with microhardness.

36 MATERIALS SCIENCE↗

The effect of simultaneous addition of Gd and Al on the photoluminescence characteristics of (Y{sub 0.94-x-y}Al{sub x}Gd{sub y}Eu{sub 0.06})BO{sub 3} phosphors

The (Y{sub 0.94-x-y}Al{sub x}Gd{sub y}Eu{sub 0.06})BO{sub 3} (0 {<=} x {<=} 0.04 and 0 {<=} y {<=}0.4) phosphors were single-phase with a hexagonal vaterite crystal structure. The (Y{sub 0.94-x-y}Al{sub x}Gd{sub y}Eu{sub 0.06})BO{sub 3} phosphor powders showed smooth, regular, and spherical morphology. The emission intensity of the Al- and Gd-co-doped (Y{sub 0.74-x}Al{sub x}Gd{sub 0.2}Eu{sub 0.06})BO{sub 3} and (Y{sub 0.925-y}Al{sub 0.015}Gd{sub y}Eu{sub 0.06})BO{sub 3} phosphors was much higher than that of Al-free (Y{sub 0.74}Gd{sub 0.2}Eu{sub 0.06})BO{sub 3} and Gd-free (Y{sub 0.925}Al{sub 0.015}Eu{sub 0.06})BO{sub 3} phosphors, respectively. This means that the simultaneous addition of Gd and Al to yttrium borates was desirable for improving their photoluminescent properties.

36 MATERIALS SCIENCE↗

Eu 5 Al 3 Sb 6 : Al 4 Tetrahedra Embedded in a Rock-Salt-Like Structure

The new Eu 5 Al 3 Sb 6 phase has been successfully synthesized as a pure phase through Sn flux methods yielding large, high-quality crystals. This structure type features disordered Al clusters that appear in the form of dual tetrahedra. It crystallizes in the monoclinic C2/m space group exhibiting a rock-salt-like Eu–Sb framework with [Al 4 ] tetrahedra replacing some of the cationic Eu atoms (space group: C2/m, a = 8.151(1) Å, b = 14.181(2) Å, c = 8.145(1) Å, β = 109.577(2)°). The structure models the [Al 4 ] as dual tetrahedra with the Al atom sites 37.5% occupied along with Eu present on the central site at 8% occupancy and the remainder of the site being vacant. The presence of the [Al 4 ] cluster is further supported by HRTEM. Electronic structure calculations show that this material is a semimetal with observed band crossings close to the Fermi level. Strong Al–Sb antibonding interactions were found from COHP calculations close to the Fermi level and provide the rationale for the deficiency of the Al cluster. Mössbauer spectroscopy on Eu-151 and Sb-121 provides oxidation states of 2+ and 3– along with the local environment. Magnetic susceptibility measurements can be described well with a Curie–Weiss law where an effective moment of 7.80 μB/mol Eu is obtained, consistent with Eu 2+ , and show canted antiferromagnetic behavior below 10 K. Temperature dependent resistivity shows a Kondo-like low-temperature upturn caused by enhanced scattering of the itinerant electrons with the 4f orbitals of Eu.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic and chemical state of aluminum from the single- (K) and double-electron excitation (KL II&III , KL I ) x-ray absorption near-edge spectra of α-alumina, sodium aluminate, aqueous Al³⁺•(H₂O)₆, and aqueous Al(OH)₄⁻

We probe, at high energy resolution, the double electron excitation (KL II&II ) x-ray absorption region that lies approximately 115 eV above the main Al K-edge (1566 eV) of α-alumina and sodium aluminate. The two solid standards, α-alumina (octahedral) and sodium aluminate (tetrahedral) are compared to aqueous species that have the same Al coordination symmetries, Al³⁺•6H₂O (octahedral) and Al(OH)₄⁻ (tetrahedral). For the octahedral species, the edge height of the KL II&III -edge is approximately 10% of the main K-edge however the edge height is much weaker (3% of K-edge height) for Al species with tetrahedral symmetry. For the α-alumina and aqueous Al³⁺•6H₂O the KL II&III spectra contain white line features and extended absorption fine structure (EXAFS) that mimics the K-edge spectra. The KL II&III -edge feature interferes with an important region of the extended-XAFS region of the spectra for the K-edge of the crystalline and aqueous standards. The K-edge spectra and K-edge positions are predicted using time-dependent density functional theory (TDDFT). The TDDFT calculations for the K-edge XANES spectra reproduce the observed transitions in the experimental spectra of the four Al species. The KL II&III and KL I onsets and their corresponding chemical shifts for the four standards are estimated using the delta self-consistent field (ΔSCF) method. Research by JLF, NG, EJB, AV, TDS was supported by U.S. Department of Energy’s (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. NG thanks Amity Andersen for help with the α-Al₂O₃ and tetrahedral sodium aluminate (NaAlO₂) clusters. All the calculations were performed using the Molecular Science Computing Capability at EMSL, a national scientific user facility sponsored by the U.S. Department of Energy’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multi-program national laboratory operated for DOE by Battelle under Contract # AC05-76RL01830.

aluminum↗

Elucidating the local structure of Li 1+ x Al x Ti 2– x (PO 4 ) 3 and Li 3 Al x Ti 2– x (PO 4 ) 3 ( x = 0, 0.3) via total scattering

Li 1+x Al x Ti 2–x (PO 4 ) 3 (LATP) and Li 3 Al x Ti 2–x (PO 4 ) 3 (x = 0, 0.3) are promising candidates in all-solid-state batteries due to their high room temperature conductivity of 10 –3 S cm –1 and air- and moisture-stability. They also exhibit unusual thermal expansion properties, with Li 1+x Al x Ti 2–x (PO 4 ) 3 showing near-zero thermal expansion along the a axis while Li 3 Al x Ti 2–x (PO 4 ) 3 exhibits polynomial positive thermal expansion along the a axis and polynomial negative thermal expansion along the c axis. A crucial component to understanding these properties is understanding the local structure. Total scattering is a powerful analytical technique as it provides information on the long-range, average structure as well as the local structure. Here, we report the first X-ray and neutron total scattering experiments performed on Li 1+x Al x Ti 2–x (PO 4 ) 3 and Li 3 Al x Ti 2–x (PO 4 ) 3 (x = 0, 0.3). We show that the PO 4 and TiO 6 polyhedra experience very little expansion of the P/Ti–O bonds up to 800 °C, nor is there much expansion when the Li content increases significantly. The minor thermal expansion of the nearest-neighbor bonds of the polyhedra is revealed to be the reason behind the unusual thermal expansion properties, causing the near-zero thermal expansion along a in Li 1+x Al x Ti 2–x (PO 4 ) 3 and moving as whole units in Li 3 Al x Ti 2–x (PO 4 ) 3 . The structural robustness of the framework is also the reason for the increased conductivity as Li content increases, as the framework remains undistorted as Li content increases, permitting Li-ion mobility as the number of charge carriers increases. Finally, this suggests that phosphate-based framework materials beyond LATP would also be a good material space to explore for new Li-ion (and other ion-) conducting materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and characterization of Al{sub 2}O{sub 3}/Y{sub 3}Al{sub 5}O{sub 12}/ZrO{sub 2} ternary hypoeutectic in situ composites by laser rapid solidification

The directionally solidified oxide eutectic in situ composite is one of the most promising high-temperature structural materials in oxidizing environments. Pore-free rods and plates of ternary Al{sub 2}O{sub 3}/Y{sub 3}Al{sub 5}O{sub 12} (YAG)/ZrO{sub 2} hypoeutectic in situ composites with hypoeutectic composition (71 mol % Al{sub 2}O{sub 3}, 17 mol % Y{sub 2}O{sub 3}, and 12 mol % ZrO{sub 2}) are prepared rapidly by the laser zone remelting technique. The hypoeutectic growth and microstructure characteristic of grown crystals are studied using the scanning electron microscopy, x-ray diffraction, and energy dispersive spectroscopy, aiming to understand well the rapid solidification behavior of the ternary oxide system of Al{sub 2}O{sub 3}-Y{sub 2}O{sub 3}-ZrO{sub 2}. The rapidly solidified Al{sub 2}O{sub 3}/YAG/ZrO{sub 2} hypoeutectic shows a refined, interpenetrating, and irregular lamellar structure with a reticular distribution of coarse Al{sub 2}O{sub 3} and yttrium aluminum garnet (YAG) and smaller ZrO{sub 2} phases. The fine ZrO{sub 2} phases are partially embedded at the Al{sub 2}O{sub 3}/YAG interfaces. Moreover, the typical dendrite microstructure similar to the metallic solidification is also observed. The formation of two kinds of microstructures is mainly attributed to the rapid growth during the laser zone remelting and constitutional supercooling. The Al{sub 2}O{sub 3} and YAG phases grow in a typical faceted manner, and the ZrO{sub 2} phase presents a weak-faceted growth. The size of the interphase spacing obtained decreases rapidly in increasing the laser scanning rate. The fundamental investigations on the irregular growth mechanisms of the hypoeutectic are suggestive to the comprehension of the complex solidification behavior of the ternary oxide systems.

36 MATERIALS SCIENCE↗

Charging effect of Al{sub 2}O{sub 3} thin films containing Al nanocrystals

In this work, Al{sub 2}O{sub 3} thin film containing Al nanocrystals (nc-Al) is deposited on Si substrate by radio frequency sputtering to form a metal-insulator-semiconductor structure. Both electron and hole trapping in nc-Al are observed. The charge storage ability of the nc-Al/Al{sub 2}O{sub 3} thin films provides the possibility of memory applications. Charging in the nc-Al also leads to a change in the dc resistance of the thin films, namely, the electron trapping in the nc-Al leads to an increase in the resistance, whereas the resistance is reduced if there is hole trapping in the nc-Al.

36 MATERIALS SCIENCE↗

Ab initio molecular dynamics of Al irradiation-induced processes during Al{sub 2}O{sub 3} growth

Al bombardment induced structural changes in {alpha}-Al{sub 2}O{sub 3} (R-3c) and {gamma}-Al{sub 2}O{sub 3} (Fd-3m) were studied using ab initio molecular dynamics. Diffusion and irradiation damage occur for both polymorphs in the kinetic energy range from 3.5 to 40 eV. However, for {gamma}-Al{sub 2}O{sub 3}(001) subplantation of impinging Al causes significantly larger irradiation damage and hence larger mobility as compared to {alpha}-Al{sub 2}O{sub 3}. Consequently, fast diffusion along {gamma}-Al{sub 2}O{sub 3}(001) gives rise to preferential {alpha}-Al{sub 2}O{sub 3}(0001) growth, which is consistent with published structure evolution experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing the electronic and vibrational structure of Au{sub 2}Al{sub 2}{sup −} and Au{sub 2}Al{sub 2} using photoelectron spectroscopy and high resolution photoelectron imaging

The electronic and vibrational structures of Au{sub 2}Al{sub 2}{sup −} and Au{sub 2}Al{sub 2} have been investigated using photoelectron spectroscopy (PES), high-resolution photoelectron imaging, and theoretical calculations. Photoelectron spectra taken at high photon energies with a magnetic-bottle apparatus reveal numerous detachment transitions and a large energy gap for the neutral Au{sub 2}Al{sub 2}. Vibrationally resolved PE spectra are obtained using high-resolution photoelectron imaging for the ground state detachment transition of Au{sub 2}Al{sub 2}{sup −} at various photon energies (670.55−843.03 nm). An accurate electron affinity of 1.4438(8) eV is obtained for the Au{sub 2}Al{sub 2} neutral cluster, as well as two vibrational frequencies at 57 ± 8 and 305 ± 13 cm{sup −1}. Hot bands transitions yield two vibrational frequencies for Au{sub 2}Al{sub 2}{sup −} at 57 ± 10 and 144 ± 12 cm{sup −1}. The obtained vibrational and electronic structure information is compared with density functional calculations, unequivocally confirming that both Au{sub 2}Al{sub 2}{sup −} and Au{sub 2}Al{sub 2} possess C{sub 2v} tetrahedral structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Site occupancy and magnetic properties of Al-substituted M-type strontium hexaferrite

We use first-principles total-energy calculations based on density functional theory to study the site occupancy and magnetic properties of Al-substituted M-type strontium hexaferrite SrFe{sub 12−x}Al{sub x}O{sub 19} with x = 0.5 and x = 1.0. We find that the non-magnetic Al{sup 3+} ions preferentially replace Fe{sup 3+} ions at two of the majority spin sites, 2a and 12k, eliminating their positive contribution to the total magnetization causing the saturation magnetization M{sub s} to be reduced as Al concentration x is increased. Our formation probability analysis further provides the explanation for increased magnetic anisotropy field when the fraction of Al is increased. Although Al{sup 3+} ions preferentially occupy the 2a sites at a low temperature, the occupation probability of the 12k site increases with the rise of the temperature. At a typical annealing temperature (>700 °C) Al{sup 3+} ions are much more likely to occupy the 12k site than the 2a site. Although this causes the magnetocrystalline anisotropy K{sub 1} to be reduced slightly, the reduction in M{sub s} is much more significant. Their combined effect causes the anisotropy field H{sub a} to increase as the fraction of Al is increased, consistent with recent experimental measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of hydrogen ambient and film thickness on ZnO:Al properties

Undoped ZnO and ZnO:Al (0.1, 0.2, 0.5, 1.0, and 2.0 wt. % Al{sub 2}O{sub 3}) films were deposited by rf magnetron sputtering. Controlled incorporation of H{sub 2} in the Ar sputtering ambient for films grown at substrate temperatures up to 200 deg. C results in mobilities exceeding 50 cm{sup 2} V{sup -1} s{sup -1} when using targets containing 0.1 and 0.2 wt. % Al{sub 2}O{sub 3}. Temperature-dependent Hall measurements show evidence of phonon scattering as the dominant scattering mechanism in these lightly Al-doped films, while ionized impurity scattering appears increasingly dominant at higher doping levels. A combination of compositional and structural analysis shows that hydrogen expands the ZnO lattice normal to the plane of the substrate and desorbs from ZnO at {approx}250 deg. C according to temperature-programmed desorption and annealing experiments.

36 MATERIALS SCIENCE↗

Laser sintering of Al nanoparticles for Al-air batteries

With the growing price of lithium material and associated safety concerns, there is an urgent need for developing new efficient, cost-effective battery systems as a successor for lithium ion batteries. Metal-air batteries have drawn huge attention and interest as energy storage devices due to their high theoretical energy density when Al, Zn, Ni, and Fe are used. In particular, Al-air batteries have the potential to become a promising primary battery system with their relatively low prices and significantly high energy density. In this paper, the authors report a printed Al anode for Al-air battery combined with a laser sintering method. The anode was fabricated by Al nanoparticle ink using squeezing printing. Furthermore, a laser sintering method was applied to remove the organic solvent in the slurry and increase the conductivity of the printed anode. By application of infrared laser sintering, the authors significantly improved electrical conductivity of Al nanoparticles and electrochemical performance of Al-air cells. A Pt/C coated hydrophobicity carbon paper was used for the air cathode to provide a good electrical conductivity, an oxygen flow ability, and the water vapor sealing. Gel-style KOH was introduced as the electrolyte, and waterways were also utilized in the chemical reaction. The authors show a full battery cell with a printed Al anode on flexible substrates. This microbattery can provide a 227 mWh/g energy density and a 239 mAh/g capacity at an operation voltage of 0.95 V.

25 ENERGY STORAGE↗

A Comparison of the Solubility Products of Layered Me(II)–Al(III) Hydroxides Based on Sorption Studies with Ni(II), Zn(II), Co(II), Fe(II), and Mn(II)

The precipitation of mixed metal–aluminum-layered double hydroxides (Me(II)–Al(III)-LDH)) may be an important control of the solubility of Mn(II), Fe(II), Ni(II), Zn(II), and Co(II) in soils, but assessment of this process is hindered by a lack of thermodynamic data. Here, we determined the solubility products (Ksp) of the Me(II)–Al(III)-LDHs formed by these metals based on long-term Me(II)–γAl2O3 sorption studies complemented with X-ray absorption spectroscopy (XAS) measurements. The LDH phases had the chemical formula Me(II)2/3Al1/3(OH)2Cl1/3. Solubility products were derived as Ksp = (Me2+)aq2/3(Al3+)aq1/3(OH−)aq2(Cl−)aq1/3, where brackets represent aqueous activity values determined from the equilibrium solution chemistry of the sorption samples. The Ksps are metal-dependent, with values increasing by two orders of magnitude in the order Ni(II) < Zn(II) < Co(II) < Fe(II) < Mn(II). Comparison to the solubility of β-Me(OH)2 suggests considerable thermodynamic preference of Me(II)–Al(III)-LDH over β-Me(OH)2 in soil environments and reveals a linear relation between the log-transformed Ksp values of Me(II)–Al(III)-LDH and β-Me(OH)2. Solubility plots suggest that Ni(II)–, Zn(II)–, and Co(II)–Al(III)-LDH may form in metal-polluted soils. Fe(II)–Al(III)-LDH may occur in riparian soils undergoing reduction, but precipitation of Mn(II)–Al(III)-LDH appears unlikely as it requires [Mn2+]aq much higher than commonly encountered in reducing soils. Additional thermodynamic and field studies are needed to further assess the importance of Me(II)–Al(III)-LDHs in soils and related geochemical systems.

Bhattacharya, Lasita↗

Prediction of the Al-rich part of the Al-Cu phase diagram using cluster expansion and statistical mechanics

In this work, the thermodynamic properties of α-Al and other phases (GP zones, θ&#x27;&#x27;, θ&#x27; and θ) in the Al-rich part of the Al-Cu system have been obtained by means of the cluster expansion formalism in combination with statistical mechanics. This information was used to build the Al-rich part of the Al-Cu phase-diagram taking into account vibrational entropic contributions for θ&#x27;, as those of the other phases were negligible. The simulation predictions of the phase boundaries between α-Al and either θ&#x27;&#x27;, θ&#x27; or θ phases as a function of temperature are in good agreement with experimental data and extend the phase boundaries to a wider temperature range. The DFT calculations reveal the presence of a number of metastable Guinier-Preston-zone type configurations that may coexist with α-Al and θ&#x27;&#x27; at low temperatures. They also demonstrate that θ&#x27; is the stable phase below 550K but it is replaced by θ above this temperature due to the vibrational entropic contribution to the Gibbs energy of θ&#x27;. This work shows how the combination of cluster expansion and statistical mechanics can be used to expand our knowledge of the phase diagram of metallic alloys and to provide Gibbs free energies of different phases that can be used as input in mesoscale simulations of precipitation.

36 MATERIALS SCIENCE↗

Mesoscale crystal plasticity modeling of nanoscale Al–Al 2 Cu eutectic alloy

Nanolaminated composites composed of alternate metal and intermetallic or ceramic lamellae exhibit high strength, high strain hardening rate and measurable plasticity at ambient and elevated temperatures. Due to the difference in plastic deformation capability between the two phases, structural instability occurs in hard lamellae associated with buckling when a compression strain is applied parallel to the lamellae. Taking nanoscale Al–Al 2 Cu eutectic alloy as a model system, we develop a mesoscale crystal plasticity (CP) model based on the confined layer slip (CLS) mechanism (referred to as CLS-CP) to understand the buckling behavior of the nanolaminates. In the CLS-CP model, buckling in Al 2 Cu lamellae is constrained by the elastic-plastic deformation of Al lamellae. The critical resolved shear stress for dislocation slip in Al lamellae varies with layer thickness, estimated by the CLS mechanism. To capture the essential features of confined layer slip mechanism that dislocations propagate within the layer and are deposited at the interfaces, plastic deformation in each lamella is the same through the layer thickness. The variation of elastic deformation through the layer thickness is captured through dividing each Al lamella into three or more elements that have the same plastic deformation through the thickness. In comparison, we also conduct standard crystal plasticity modeling in which plastic deformation in the three elements through the layer thickness is calculated individually according to phenomenological power law. In these simulations, plasticity in Al 2 Cu lamellae is modeled with slips on {121} planes due to the slip continuity across the interface, which have been observed in our recent experiments. The CLS-CP model is able to predict mechanical properties of nano-scale lamellar materials. In contrast, the standard CP model is more suitable to study deformation behavior of sub-micro scale lamellar materials. In conclusion, the CLS-CP model calculations reveal that critical compression strain corresponding to buckling increases as layer thickness decreases, which agree with micro-pillar compression tests.

36 MATERIALS SCIENCE↗