Search NASA⌕ Search

SEARCH · Search NASA

Results for “AMMONIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Effective hole extraction using MoO{sub x}-Al contact in perovskite CH{sub 3}NH{sub 3}PbI{sub 3} solar cells

We report an 11.4%-efficient perovskite CH{sub 3}NH{sub 3}PbI{sub 3} solar cell using low-cost molybdenum oxide/aluminum (i.e., MoO{sub x}/Al) as an alternative top contact to replace noble/precious metals (e.g., Au or Ag) for extracting photogenerated holes. The device performance of perovskite solar cells using a MoO{sub x}/Al top contact is comparable to that of cells using the standard Ag top contact. Analysis of impedance spectroscopy measurements suggests that using 10-nm-thick MoO{sub x} and Al does not affect charge-recombination properties of perovskite solar cells. Using a thicker (20-nm) MoO{sub x} layer leads to a lower cell performance caused mainly by a reduced fill factor. Our results suggest that MoO{sub x}/Al is promising as a low-cost and effective hole-extraction contact for perovskite solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Qualifying composition dependent p and n self-doping in CH{sub 3}NH{sub 3}PbI{sub 3}

We report the observation of self-doping in perovskite. CH{sub 3}NH{sub 3}PbI{sub 3} was found to be either n- or p-doped by changing the ratio of methylammonium halide (MAI) and lead iodine (PbI{sub 2}) which are the two precursors for perovskite formation. MAI-rich and PbI{sub 2}-rich perovskite films are p and n self-doped, respectively. Thermal annealing can convert the p-type perovskite to n-type by removing MAI. The carrier concentration varied as much as six orders of magnitude. A clear correlation between doping level and device performance was also observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The superionic phase transitions in (NH{sub 4}){sub 3}H(SeO{sub 4}){sub 2} under hydrostatic pressure up to 400 MPa

The effect of hydrostatic pressure on proton conductivity of (NH{sub 4}){sub 3}H(SeO{sub 4}){sub 2} superionic crystal was studied in a wide temperature range and different isobaric conditions by means of impedance spectroscopy method. The measurements were performed along the trigonal c axis of the crystal, i.e., along the direction perpendicular to the plane in which, in the superionic phases, a dynamically disordered H-bond network is formed. The obtained pressure-temperature phase diagram is linear with increasing pressure. The triple point, which is the point of coexistence of the three phases: ferroelastic phase IV, ferroelastic phase III, and superionic phase II was found at p = 116.3 MPa and T = 287.3 K. High pressure leads to increase in the temperature range of stability of both superionic phases and to a drastic decrease in the temperature width of the ferroelastic phase III. With increasing pressure, the range of the superionic phase II expands at the expense of the range of the ferroelastic phase III, which is unstable and vanishes at the triple point.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High efficiency solar cells combining a perovskite and a silicon heterojunction solar cells via an optical splitting system

We have applied an optical splitting system in order to achieve very high conversion efficiency for a full spectrum multi-junction solar cell. This system consists of multiple solar cells with different band gap optically coupled via an “optical splitter.” An optical splitter is a multi-layered beam splitter with very high reflection in the shorter-wave-length range and very high transmission in the longer-wave-length range. By splitting the incident solar spectrum and distributing it to each solar cell, the solar energy can be managed more efficiently. We have fabricated optical splitters and used them with a wide-gap amorphous silicon (a-Si) solar cell or a CH{sub 3}NH{sub 3}PbI{sub 3} perovskite solar cell as top cells, combined with mono-crystalline silicon heterojunction (HJ) solar cells as bottom cells. We have achieved with a 550 nm cutoff splitter an active area conversion efficiency of over 25% using a-Si and HJ solar cells and 28% using perovskite and HJ solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion transport and structural dynamics in homologous ammonium and phosphonium-based room temperature ionic liquids

Charge transport and structural dynamics in a homologous pair of ammonium and phosphonium based room temperature ionic liquids (ILs) have been characterized over a wide temperature range using broadband dielectric spectroscopy and quasi-elastic light scattering spectroscopy. We have found that the ionic conductivity of the phosphonium based IL is significantly enhanced relative to the ammonium homolog, and this increase is primarily a result of a lower glass transition temperature and higher ion mobility. Additionally, these ILs exhibit pronounced secondary relaxations which are strongly influenced by the atomic identity of the cation charge center. While the secondary relaxation in the phosphonium IL has the expected Arrhenius temperature dependence characteristic of local beta relaxations, the corresponding relaxation process in the ammonium IL was found to exhibit a mildly non-Arrhenius temperature dependence in the measured temperature range—indicative of molecular cooperativity. These differences in both local and long-range molecular dynamics are a direct reflection of the subtly different inter-ionic interactions and mesoscale structures found in these homologous ILs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructures and properties of CH{sub 3}NH{sub 3}PbI{sub 3−x}Cl{sub x} hybrid solar cells

Halide-perovskite CH{sub 3}NH{sub 3}PbI{sub 3} was produced on mesoporous TiO{sub 2} layer by spin-coating a precursor solution of PbCl{sub 2} and CH{sub 3}NH{sub 3}I in dimethylformamide. The role of the annealing process and chlorine (Cl) doping for the perovskite-phase formation was investigated. It was found that crystallization of the perovskite materials was stimulated by the annealing process, and that longer annealing time is necessary for the Cl-doped perovskite compared with that of non-doped perovskite phase.

36 MATERIALS SCIENCE↗

On the stability of the disordered molecular alloy phase of ammonia hemihydrate

The disordered-molecular-alloy phase (DMA) of ammonia hydrates [J. S. Loveday and R. J. Nelmes, Phys. Rev. Lett. 83, 4329 (1999)] is unique in that it has substitutional disorder of ammonia and water over the molecular sites of a body centred cubic lattice. Whilst this structure has been observed in ammonia di- and mono-hydrate compositions, it has not been conclusively observed in the ammonia hemihydrate system. This work presents investigations of the structural behaviour of ammonia hemihydrate as a function of P and T. The indications of earlier studies [Ma et al. RSC Adv. 2, 4290 (2012)] that the DMA structure could be produced by compression of ammonia hemihydrate above 20 GPa at ambient temperature are confirmed. In addition, the DMA structure was found to form reversibly both from the melt, and on warming of ammonia hemihydrate phase-II, in the pressure range between 4 and 8 GPa. The route used to make the DMA structure from ammonia mono- and di-hydrates—compression at 170 K to 6 GPa followed by warming to ambient temperature—was found not to produce the DMA structure for ammonia hemihydrate. These results provide the first strong evidence that DMA is a thermodynamically stable form. A high-pressure phase diagram for ammonia hemihydrate is proposed which has importance for planetary modelling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure evolution of fullerene on CH 3 NH 3 PbI 3

The thickness dependence of fullerene on CH 3 NH 3 PbI 3 perovskitefilm surface has been investigated by using ultraviolet photoemission spectroscopy (UPS), X-ray photoemission spectroscopy(XPS), and inverse photoemission spectroscopy (IPES). The lowest unoccupied molecular orbital and highest occupied molecular orbital (HOMO) can be observed directly with IPES and UPS. It is observed that the HOMO level in fullerene shifts to lower binding energy. The XPS results show a strong initial shift of core levels to lower binding energy in the perovskite, which indicates that electrons transfer from the perovskitefilm to fullerene molecules. Further deposition of fullerene forms C 60 solid, accompanied by the reduction of the electron transfer. As a result, the strongest electron transfer happened at 1/4 monolayer of fullerene.

36 MATERIALS SCIENCE↗

Theoretical investigation of HNgNH{sub 3}{sup +} ions (Ng = He, Ne, Ar, Kr, and Xe)

The equilibrium geometries, harmonic frequencies, and dissociation energies of HNgNH{sub 3}{sup +} ions (Ng = He, Ne, Ar, Kr, and Xe) were investigated using the following method: Becke-3-parameter-Lee-Yang-Parr (B3LYP), Boese-Matrin for Kinetics (BMK), second-order Møller-Plesset perturbation theory (MP2), and coupled-cluster with single and double excitations as well as perturbative inclusion of triples (CCSD(T)). The results indicate that HHeNH{sub 3}{sup +}, HArNH{sub 3}{sup +}, HKrNH{sub 3}{sup +}, and HXeNH{sub 3}{sup +} ions are metastable species that are protected from decomposition by high energy barriers, whereas the HNeNH{sub 3}{sup +} ion is unstable because of its relatively small energy barrier for decomposition. The bonding nature of noble-gas atoms in HNgNH{sub 3}{sup +} was also analyzed using the atoms in molecules approach, natural energy decomposition analysis, and natural bond orbital analysis.

74 ATOMIC AND MOLECULAR PHYSICS↗

Atomistic origins of CH{sub 3}NH{sub 3}PbI{sub 3} degradation to PbI{sub 2} in vacuum

We study the mechanisms of CH{sub 3}NH{sub 3}PbI{sub 3} degradation and its transformation to PbI{sub 2} by means of X-ray diffraction and the density functional theory. The experimental analysis shows that the material can degrade in both air and vacuum conditions, with humidity and temperature-annealing strongly accelerating such process. Based on ab initio calculations, we argue that even in the absence of humidity, a decomposition of the perovskite structure can take place through the statistical formation of molecular defects with a non-ionic character, whose volatility at surfaces should break the thermodynamic defect equilibria. We finally discuss the strategies that can limit such phenomenon and subsequently prolong the lifetime of the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Micelle depletion-induced vs. micelle-mediated aggregation in nanoparticles

The phase behavior anionic silica nanoparticle (Ludox LS30) with non-ionic surfactants decaethylene glycol monododecylether (C12E10) and cationic dodecyltrimethyl ammonium bromide (DTAB) in aqueous electrolyte solution has been studied by small-angle neutron scattering (SANS). The measurements have been carried out for fixed concentrations of nanoparticle (1 wt%), surfactants (1 wt%) and electrolyte (0.1 M NaCl). Each of these nanoparticle–surfactant systems has been examined for different contrast conditions where individual components (nanoparticle or surfactant) are made visible. It is observed that the nanoparticle-micelle system in both the cases lead to the aggregation of nanoparticles. The aggregation is found to be micelle depletion-induced for C12E10 whereas micelle-mediated aggregation for DTAB. Interestingly, it is also found that phase behavior of mixed surfactant (C12E10 + DTAB) system is similar to that of C12E10 (unlike DTAB) micelles with nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molybdenum oxide nanocubes: Synthesis and characterizations

Molybdenum oxide nanoparticles were prepared by Solid state synthesis. The MoO{sub 3} nanoparticles were synthesized by using commercially available ammonium heptamolybdate. The XRD pattern reveals that the synthesized MoO{sub 3} has orthorhombic structure. In addition, lattice parameter values were also calculated using XRD data. The Raman analysis confirm the presence of Mo-O in MoO{sub 3} nanoparticles. DRS-UV analysis shows that MoO{sub 3} has a band gap of 2.89 eV. FE-SEM analysis confirms the material morphology in cubes with nano scale.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

2D heterodyne-detected sum frequency generation study on the ultrafast vibrational dynamics of H{sub 2}O and HOD water at charged interfaces

Two-dimensional heterodyne-detected vibrational sum-frequency generation (2D HD-VSFG) spectroscopy is applied to study the ultrafast vibrational dynamics of water at positively charged aqueous interfaces, and 2D HD-VSFG spectra of cetyltrimethylammonium bromide (CTAB)/water interfaces in the whole hydrogen-bonded OH stretch region (3000 cm{sup −1} ≤ ω{sub pump} ≤ 3600 cm{sup −1}) are measured. 2D HD-VSFG spectrum of the CTAB/isotopically diluted water (HOD-D{sub 2}O) interface exhibits a diagonally elongated bleaching lobe immediately after excitation, which becomes round with a time constant of ∼0.3 ps due to spectral diffusion. In contrast, 2D HD-VSFG spectrum of the CTAB/H{sub 2}O interface at 0.0 ps clearly shows two diagonal peaks and their cross peaks in the bleaching region, corresponding to the double peaks observed at 3230 cm{sup −1} and 3420 cm{sup −1} in the steady-state HD-VSFG spectrum. Horizontal slices of the 2D spectrum show that the relative intensity of the two peaks of the bleaching at the CTAB/H{sub 2}O interface gradually change with the change of the pump frequency. We simulate the pump-frequency dependence of the bleaching feature using a model that takes account of the Fermi resonance and inhomogeneity of the OH stretch vibration, and the simulated spectra reproduce the essential features of the 2D HD-VSFG spectra of the CTAB/H{sub 2}O interface. The present study demonstrates that heterodyne detection of the time-resolved VSFG is critically important for studying the ultrafast dynamics of water interfaces and for unveiling the underlying mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surfactant assisted synthesis of aluminum doped SrFe{sub 10}Al{sub 2}O{sub 19} hexagonal ferrite

M-type aluminum doped SrFe{sub 10}Al{sub 2}O{sub 19} were synthesized via co-precipitation method using cetyltrimethyl ammonium bromide (CTAB) as a surfactant. The effects of CTAB content (x = 0, 1, 3, and 9 wt. %) on the formation, structure, morphology, magnetic, and dielectric properties of the SrFe{sub 10}Al{sub 2}O{sub 19} nanoparticles were investigated. X-ray diffraction results show elimination of α-Fe{sub 2}O{sub 3} phase from samples prepared using CTAB. Morphological changes including grain and crystallite size was noticed with the increase in the CTAB content. With the increase in CTAB, powder particles grew in hexagonal plates. A linear increase in saturation magnetization, Ms, with CTAB content was observed from 56.5 emu/g at 0% CTAB to 66.4 emu/g at 9% CTAB. This is a net increase of 17.5% in Ms. The coercivity (Hc ∼ 5700 Oe) of sample reached maximum at 1% CTAB and reduced with further CTAB content reaching to a minimum value of 4488 Oe at 9% CTAB. A slight increase in Curie temperature (735 K) was also observed for samples synthesized using CTAB as compared to that of sample prepared in the absence of CTAB (729 K). Samples synthesized with CTAB show higher dielectric constants as compared to samples prepared without CTAB, while dielectric constant for all samples show decrease in value with the increase in frequency. These results imply that CTAB may act as a crystallization master, controlling the nucleation and growth of SrFe{sub 10}Al{sub 2}O{sub 19} crystal. The study delineates the scope of improving magnetic properties of ferrites without substitution of metal ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of phase composition for electronic states in CH{sub 3}NH{sub 3}PbI{sub 3} prepared from CH{sub 3}NH{sub 3}I/PbCl{sub 2} solution

Modulated surface photovoltage (SPV) spectra have been correlated with the phase composition in layers of CH{sub 3}NH{sub 3}PbI{sub 3} (MAPbI{sub 3}) prepared from MAI and PbCl{sub 2} and annealed at 100 °C. Depending on the annealing time, different compositions of MAPbI{sub 3}, MAPbCl{sub 3}, MACl, PbI{sub 2}, and an un-identified phase were found. It has been demonstrated that evaporation of MAI and HI is crucial for the development of electronic states in MAPbI{sub 3} and that only the appearance and evolution of the phase PbI{sub 2} has an influence on electronic states in MAPbI{sub 3}. With ongoing annealing, (i) a transition from p- to n-type doping was observed with the appearance of PbI{sub 2}, (ii) shallow acceptor states were distinguished and disappeared in n-type doped MAPbI{sub 3}, and (iii) a minimum of the SPV response related to deep defect states was found at the transition from p- to n-type doping. The results are discussed with respect to the further development of highly efficient and stable MAPbI{sub 3} absorbers for solar cells.

36 MATERIALS SCIENCE↗

Pressure-induced structural changes in NH{sub 4}Br

We report angle dispersive X-ray diffraction (XRD) measurements and Raman spectroscopy on NH{sub 4}Br up to 70.0 GPa at room temperature. Three thermodynamically stable phases (phases II, IV, and V) are confirmed and a new possible phase (phase VI) of P2{sub 1}/m symmetry is proposed whose structure was established from Rietveld refinement of synchrotron XRD data for the first time. The phase sequence observed in NH{sub 4}Br is in accordance with phase II → IV → V → VI. Phase V transforms into phase VI at about 57.8 GPa with a huge volume reduction of 30%. Still, the intramolecular distances are analyzed to better understand the nature of structures. The H–H interactions become markedly more important as the N–Br distances are compacted, which is probably the reason of the kink of symmetric stretching band (ν{sub 1}) at the transition pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stability of organometal perovskites with organic overlayers

The air-stability of vapour-phase-deposited methylammonium lead triiodide (CH{sub 3}NH{sub 3}PbI{sub 3}) perovskite thin films has been studied using X-ray diffraction. It is found that the perovskite structure without organic coating decomposes completely within a short period of time (∼two days) upon exposure to ambient environment. The degradation of the perovskite structure is drastically reduced when the perovskite films are capped with thin N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB) films. We discovered that the amount of lead iodide (PbI{sub 2}), a product of the degradation, grows as a function of time in a sigmoidal manner. Further mathematical modeling analysis shows that the perovskite degradation follows the Avrami equation, a kinetics theory developed for quantifying phase transformations in solid-state materials.

36 MATERIALS SCIENCE↗

Investigation on thermal evaporated CH{sub 3}NH{sub 3}PbI{sub 3} thin films

CH{sub 3}NH{sub 3}I, PbI{sub 2} and CH{sub 3}NH{sub 3}PbI{sub 3} films were fabricated by evaporation and characterized with X-ray Photoelectron Spectroscopy (XPS) and X-ray diffraction (XRD). The XPS results indicate that the PbI{sub 2} and CH{sub 3}NH{sub 3}PbI{sub 3} films are more uniform and stable than the CH{sub 3}NH{sub 3}I film. The atomic ratio of the CH{sub 3}NH{sub 3}I, PbI{sub 2} and CH{sub 3}NH{sub 3}PbI{sub 3} films are C:N:I=1.00:1.01:0.70, Pb:I= 1.00:1.91 and C: N: Pb: I = 1.29:1.07:1.00:2.94, respectively. The atomic ratio of CH{sub 3}NH{sub 3}PbI{sub 3} is very close to that of the ideal perovskite. Small angle x-ray diffraction results demonstrate that the as evaporated CH{sub 3}NH{sub 3}PbI{sub 3} film is crystalline. The valence band maximum (VBM) and work function (WF) of the CH{sub 3}NH{sub 3}PbI{sub 3} film are about 0.85eV and 4.86eV, respectively.

36 MATERIALS SCIENCE↗