SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The field of view required of the space base antenna is defined for both the tracking and data relay satellite link and detached module links. The gain requirements are established and the feasibility of alternative antenna configurations using phased arrays and reflectors are considered. One recommended and one alternative configuration are presented for each of the required links.
Amplitude and phase measurements help characterize nearly paraboloidal reflectors. Deviation of microwave reflector from ideal paraboloidal shape deduced from far-field amplitude and phase measurements with help of theoretical technique referred to as microwave holographic metrology. Technique enables estimation of antenna-surface figure from measurements taken at prescribed number of field points. After determining amount of surface deviation, performance of antenna then improved by properly adjusting surface panels.
Report summarizes computational analysis of field of view of rotating elliptical-cross-section parabolic-reflector antenna for SeaWinds spacecraft. Issues considered include blockage and diffraction by other objects near antenna, related concerns about electromagnetic interference and electromagnetic compatibility, and how far and in which configuration other objects positioned with respect to antenna to achieve required performance.
In computer programs used for evaluating the performance of high-gain antennas, efficient numerical methods for calculating the far-field patterns must be used since the majority of computer time and storage requirements may be attributed to this phase of the program. The numerical method most frequently used is the Fast Fourier Transform (FFT), which computes the far field as the Fourier transform of the field distribution in the antenna aperture. A new numerical method that in many applications is superior to the FFT in terms of reducing computer time and storage requirements is described.
It is the purpose of this paper to demonstrate that the typical approach based on the far field pattern of the feed would result into erroneous result and special care must be exercised to obtain the correct result.
Radiation pattern of slotted-cylinder antenna in presence of inhomogeneous lossy plasma
Correction for gain computations based on pattern integration during translational motion of antenna
Relatively little is known about the cavity between the Earth and the ionosphere, which opens opportunities for technological advances and unique ideas. One effective means to study this cavity is with extremely low frequency (ELF) antennas. Possible applications of these antennas are global weather prediction, earthquake prediction, planetary exploration, communication, wireless transmission of power, or even a free energy source. The superconducting quantum interference device SQUID) and the coil antenna are the two most acceptable receivers discovered for picking up ELF magnetic fields. Both antennas have the potential for size reduction, allowing them to be portable enough for access to space and even for personal ware. With improvements of these antennas and signal processing, insightful analysis of Schumann resonance (SR) can give the science community a band of radio frequency (RF) signals for improving life here on Earth and exploring beyond.
Dispersion surfaces and characteristic plane waves in gyrotropic medium, deriving far field expression
Far field radiation patterns of Advanced Antenna System presented by Surveyor I on lunar surface
The feasibility of acoustic verification of microwave near field to far field transformation algorithms using the Phased Array Sonic Simulation System was studied. Existing electromagnetic near field measurement techniques and transformation algorithms (equations) were investigated. It was analytically determined that acoustic verification is valid. Acoustic simulation of electromagnetic near field to far field transformations is emphasized. The acoustic simulation of electromagnetic near field to far field transformation is verified for the modal expansion method. In the modal expansion method, data from antenna near field measurements are converted to a summation or spectrum of modes corresponding to wave numbers in the measurement coordinate system. Fourier transformation of those measurements preserves the far field information in a spectral form that is then readily extractable.
It is pointed out that the computation of the Fresnel fields for large aperture antennas is significant for many applications. The present investigation is concerned with an approach for the effective utilization of the coefficients of the Jacobi-Bessel series for the far-field to obtain an analytically continuous representation of the antenna field which is valid from the Fresnel region into the far field. Attention is given to exact formulations and closed form solutions, Fresnel and Fresnel small angle approximations, aspects of field expansion, the accuracy of the Fresnel and Fresnel small angle approximations, and the Jacobi-Bessel expansion applied to the Fresnel small angle approximation.
The near field radiation characteristics of implantable Square Spiral Chip Inductor Antennas (SSCIA) for Bio-Sensors have been measured. Our results indicate that the measured near field relative signal strength of these antennas agrees with simulated results and confirm that in the near field region the radiation field is fairly uniform in all directions. The effects of parameters such as ground-plane, number of turns and microstrip-gap width on the performance of the SSCIA are presented. Furthermore, the SSCIA antenna with serrated ground plane produce a broad radiation pattern, with a relative signal strength detectable at distances within the range of operation of hand-held devices for self-diagnosis.
A method of maintaining radio communication despite the emergence of unpredictable fades and nulls in the radiation pattern of an antenna has been proposed. The method was originally intended to be applied in the design and operation of a radio antenna aboard a robotic exploratory vehicle on a remote planet during communication with a spacecraft in orbit around the planet. The method could also be applied in similar terrestrial situations for example, radio communication between two ground vehicles or between a ground vehicle and an aircraft or spacecraft. The method is conceptually simple, is readily adaptable to diverse situations, and can be implemented without adding greatly to the weight, cost, power demand, or complexity of a system to which it may be applied. The unpredictable fades and nulls in an antenna radiation pattern arise because of electromagnetic interactions between the antenna and other objects within the near field of the antenna (basically, objects within a distance of a few wavelengths). These objects can include general vehicle components, masts, robotic arms, other antennas, the ground, and nearby terrain features. Figure 1 presents representative plots of signal strength versus time during a typical pass of a spacecraft or aircraft through the far field of such an antenna, showing typical nulls and fades caused by nearby objects. The traditional approach to ensuring reliability of communication in the presence of deep fades calls for increasing the effective transmitter power and/or reducing the receiver noise figure at the affected ground vehicle, possibly in combination with appropriate redesign of the equipment at the spacecraft or aircraft end of the communication link. These solutions can be expensive and/or risky and, depending on the application, can add significantly to weight, cost, and power demand. The proposed method entails none of these disadvantages.
Source distribution determination from radiation pattern and field amplitudes expressed as Fourier transform pair
Field intensity patterns and comparison of beam widths and directivites of Mills cross and two- directional matrix antenna arrays using crossed- slot antennas
Power density measurements were made at Deep Space Station (DSS) 13 in the near field of the 26-m antenna to determine if radio frequency (rf) fields generated by the 20-kW transmitters could be responsible for the failure of three solid state rf amplifiers. These amplifiers are used in the Search for Extraterrestrial Intelligence (SETI) Radio Spectrum Surveillance System, which is currently located at the site. Measurements were made independently for one transmitter at 7150 MHz, and both transmitters together. Measurement results are tabulated and compared with predicted power densities under the measurement conditions. The results agree with the predictions within a factor of two. The predictions appear to give worst case values. Measurements indicated that amplifier failures are not attributable to the transmitter.
The deviation of a reflector antenna surface from a perfect parabolic shape causes degradation of the performance of the antenna. The problem of determining the shape of the reflector surface in a reflector antenna using near field phase measurements is not a new one. A recent issue of the IEEE tansactions on Antennas and Propagation (June 1988) contained numerous descriptions of the use of these measurements: holographic reconstruction or inverse Fourier transform. Holographic reconstruction makes use of measurement of the far field of the reflector and then applies the Fourier transform relationship between the far field and the current distribution on the reflector surface. Inverse Fourier transformation uses the phase measurements to determine the far field pattern using the method of Kerns. After the far field pattern is established, an inverse Fourier transform is used to determine the phases in a plane between the reflector surface and the plane in which the near field measurements were taken. These calculations are time consuming since they involve a relatively large number of operations. A much faster method can be used to determine the position of the reflector. This method makes use of simple geometric optics to determine the path length of the ray from the feed to the reflector and from the reflector to the measurement point. For small physical objects and low frequencies, diffraction effects have a major effect on the error, and the algorithm provides incorrect results. It is believed that the effect is less noticeable for large distortions such as antenna warping, and more noticeable for small, localized distortions such as bumps and depressions such as might be caused by impact damage.