Search NASA⌕ Search

SEARCH · Search NASA

Results for “ARP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

High-Quality SnSe 2 Single Crystals: Electronic and Thermoelectric Properties

In this work, high-quality SnSe 2 single crystals were successfully synthesized using a temperature gradient method. N-type characteristics and strong anisotropic transport properties of SnSe 2 single crystals were exhibited between the ab plane and the c-axis. At 673 K, the power factor (PF) value along the ab plane is 3.43 μW cm -1 K -2 , while it is 0.92 μW cm -1 K -2 along the c-axis. The ratio between thermal conductivities along the ab plane (κ ab ) and c-axis (κ c ) is on the order of 7.6 at 300 K, while this value is about 5.6 at 673 K. The thermoelectric figure of merit (ZT) in the c-axis (0.15) is higher than that (0.1) along the ab plane, according to the ultralow out-of-plane thermal conductivity. The electronic band structure results, which were examined by angle-resolved photoemission spectroscopy (ARPES) predicted the potential of improving the thermoelectric performance of SnSe 2 single crystals by electron doping.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ultrafast Dynamics of Molecules on Surfaces Studied with Time-Resolved XUV Photoelectron Spectroscopy (Final Report)

In this project we set out to make technical advances in time-resolved photoemission from surfaces and study molecule-surface charge transfer processes. Combining a novel light source developed at Stony Brook with a new type of time-of-flight photoemission electron microscope (TOF k-mic) developed in Mainz, Germany, we achieved the former goal. Our light source, based on cavity-enhanced high harmonic generation at 61 MHz repetition rate, enables ultrafast time-resolved photoemission experiments to be conducted with orders of magnitude higher photocurrents than otherwise possible. Critically, this provides the high dynamic range necessary to study perturbatively excited samples, such that one can study the intrinsic dynamics of electrons and holes as they would occur in a device. Combining our light source with the TOF k-mic, we’ve achieved an overall improvement in data rate of time- and angle-resolved photoemission (tr-ARPES) of approximately four orders of magnitude over the previous state-of-the-art using kHz-repetition rate sources and conventional hemispherical electron analyzers. This new instrument is now being used in experiments on 2D materials and organic semiconductors.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Effect of Dilute Magnetism in a Topological Insulator

Three-dimensional (3D) topological insulator (TI) has emerged as a unique state of quantum matter and generated enormous interests in condensed matter physics. The surfaces of a 3D TI consist of a massless Dirac cone, which is characterized by the Z 2 topological invariant. Introduction of magnetism on the surface of a TI is essential to realize the quantum anomalous Hall effect and other novel magneto-electric phenomena. Here, by using a combination of first-principles calculations, magneto-transport and angle-resolved photoemission spectroscopy (ARPES), we study the electronic properties of gadolinium (Gd)-doped Sb 2 Te 3 . Our study shows that Gd doped Sb 2 Te 3 is a spin-orbit-induced bulk band-gap material, whose surface is characterized by a single topological surface state. Our results provide a new platform to investigate the interactions between dilute magnetism and topology in magnetic doped topological materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Hole‐Carrier‐Dominant Transport in 2D Single‐Crystal Copper

Abstract In 2D noble metals like copper, the carrier scattering at grain boundaries has obscured the intrinsic nature of electronic transport. However, it is demonstrated that the intrinsic nature of transport by hole carriers in 2D copper can be revealed by growing thin films without grain boundaries. As even a slight deviation from the twin boundary is perceived as grain boundaries by electrons, it is only through the thorough elimination of grain boundaries that the hidden hole‐like attribute of 2D single‐crystal copper can be unmasked. Two types of Fermi surfaces, a large hexagonal Fermi surface centered at the zone center and the triangular Fermi surface around the zone corner, tightly matching to the calculated Fermi surface topology, confirmed by angle‐resolved photoemission spectroscopy (ARPES) measurements and vivid nonlinear Hall effects of the 2D single‐crystal copper account for the presence of hole carriers experimentally. This breakthrough suggests the potential to manipulate the majority carrier polarity in metals by means of grain boundary engineering in a 2D geometry.

36 MATERIALS SCIENCE↗
DOE OSTI2024

UOTe: Kondo‐Interacting Topological Antiferromagnet in a Van der Waals Lattice

Since the initial discovery of 2D van der Waals (vdW) materials, significant effort has been made to incorporate the three properties of magnetism, band structure topology, and strong electron correlations—to leverage emergent quantum phenomena and expand their potential applications. However, the discovery of a single vdW material that intrinsically hosts all three ingredients has remained an outstanding challenge. Here, in this work, the discovery of a Kondo-interacting topological antiferromagnet is reported in the vdW 5f electron system UOTe. It has a high antiferromagnetic (AFM) transition temperature of 150 K, with a unique AFM configuration that breaks the combined parity and time reversal (PT) symmetry in an even number of layers while maintaining zero net magnetic moment. This angle-resolved photoemission spectroscopy (ARPES) measurements reveal Dirac bands near the Fermi level, which combined with the theoretical calculations demonstrate UOTe as an AFM Dirac semimetal. Within the AFM order, the presence of the Kondo interaction is observed, as evidenced by the emergence of a 5ƒ flat band near the Fermi level below 100 K and hybridization between the Kondo band and the Dirac band. The density functional theory calculations in its bilayer form predict UOTe as a rare example of a fully-compensated AFM Chern insulator.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ohmic contact formation at the Au/Sr 3 Ir 2 O 7 interface

Here, using X-ray photoelectron spectroscopy (XPS), we show that Au forms an Ohmic contact with the surface of the narrow-bandgap Mott insulator Sr 3 Ir 2 O 7 thin films. XPS reveals no significant binding energy shift with increasing Au overlayer thickness on epitaxial Sr 3 Ir 2 O 7 (001) thin films, consistent with the linear current-voltage (I-V) behavior and indicative of negligible band bending. The absence of Schottky barrier formation at the Au/Sr 3 Ir 2 O 7 interface corroborates the metallic surface character of the Sr 3 Ir 2 O 7 thin film, as observed in angle-resolved photoemission spectroscopy (ARPES) studies, suggesting that the interface behaves effectively as a metal-on-metal contact. Furthermore, XPS points to the presence of distinct surface/interface and bulk electronic states for Sr 3 Ir 2 O 7 . This study provides critical material information for designing iridate-based electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Influence of structural defects on charge density waves in 1T-TaS2

Abstract The influence of intrinsic defects of 1T-TaS 2 on charge density waves (CDWs) is studied using scanning tunneling microscopy and spectroscopy (STM, STS), angle-resolved photoelectron spectroscopy (ARPES), and density functional theory (DFT). We identify several types of structural defects and find that most have a local character limited to a single CDW site, with a single exception which effectively behaves as a dopant, leading to band-bending and affecting multiple neighboring sites. While only one type of defect can be observed by STM topographic imaging, all defects are easily resolved in STS mapping. Our results indicate modulation of the Mott band gap commensurate with the CDW and breaking of the three-fold symmetry of electronic states. DFT calculations (with included Coulomb interactions) are used to investigate the electronic structure, focusing on both sulfur vacancy and oxygen-sulfur substitution. The sulfur vacancy system, characterized with a metallic behavior, is identified as the origin of one of the experimentally observed defects. Additionally, the effect of oxidation of 1T-TaS 2 depends on the substitution site, leading to the heterogeneity of electronic properties.

Chemistry↗
DOE OSTI2025

New capabilities for rapid depletion analysis of pebble-bed reactors in SCALE

The SCALE Leap-In for Cores at Equilibrium (SLICE) method leverages capabilities available in the SCALE modeling and simulation suite to facilitate rapid estimation of equilibrium core inventories for flowing-pebble reactor systems in support of a variety of fuel cycle applications. New capabilities that compliment the SLICE method have been developed for the ORIGAMI interface to ORIGEN in SCALE to facilitate rapid depletion calculations for flowing-pebble systems. New features include a more generalized and flexible means of specifying interpolation dimensions, the ability to evaluate pebbles moving through user-defined “axial zones” in each of the pebble’s multiple passes through the core, and the treatment of differential velocities across radial channels (representing both pebble-to-pebble and wall-to-pebble friction effects). ORIGAMI thus provides an efficient user interface to define a pebble’s path and irradiation histories of its multiple passes through the core to calculate the pebble’s time-dependent inventories, which can be useful in various applications domains such as safeguards, criticality safety, and disposal analyses. The consistency of new ORIGAMI approach was verified against the solution obtained using the SLICE method with ORIGEN-ARP, showing excellent agreement.

Skutnik, Steven E. [Oak Ridge National Laboratory ↗
DOE OSTI2021

Electronic structure and charge-density wave transition in monolayer $\mathrm{VS}_2$

Vanadium disulfide (VS 2 ) attracts elevated interests for its charge-density wave (CDW) phase transition, ferromagnetism, and catalytic reactivity, but the electronic structure of monolayer has not been well understood yet. Here we report synthesis of epitaxial 1T VS 2 monolayer on bilayer graphene grown by molecular-beam epitaxy (MBE). Angle-resolved photoemission spectroscopy (ARPES) measurements reveal that Fermi surface with six elliptical pockets centered at the M points shows gap opening at low temperature. Temperature-dependence of the gap size suggests existence of CDW phase transition above room temperature. Here, our observations provide important evidence to understand the strongly correlated electron physics and the related surface catalytic properties in two-dimensional transition-metal dichalcogenides (TMDCs).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Electronic structure of p -type transparent conducting oxide CuAlO 2

We report copper-based delafossite oxides are excellent candidates for the p-type transparent conducting oxide (TCO), which is essential in realizing transparent semiconductor applications. Using angle-resolved photoemission spectroscopy (ARPES), we report the low-energy electronic structure of CuAlO 2 . We found that the band structure near the valence band top is characterized by hole bands with their maxima along the Brillouin zone boundary. Furthermore, the effective masses along the Γ–M and Γ–K directions were found to be (0.6 ± 0.1) m0 and (0.9 ± 0.1) m 0 , respectively, which impose an important benchmark against the existing band calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Enhanced through-thickness electrical conductivity and lightning strike damage response of interleaved vertically aligned short carbon fiber composites

Through-thickness electrical conductivity of carbon fiber reinforced polymers (CFRPs) is a key characteristic that determines the severity of lighting strike-induced damage. Carbon Fibers (CFs) are inherently electrically conductive and therefore provide high conductivity in the direction of the fiber orientation. However, electrical conductivities through the thickness and orthogonal to the CF orientation in CFRPs are governed by the insulating polymer matrix present between CFs. Here, in this work, through the thickness alignment of short CFs in between layers of CFRP laminates is demonstrated to improve the through-thickness electrical conductivity. Composites with interleaved vertically aligned short CF fibers (<150 μm) will be referred as V-fiber composites hereafter. The effect of the V-fiber on the lightning strike damage is evaluated against an artificial lightning strike of 100 kA (modified waveform A of SAE ARP-5412B standard). The improved through-thickness electrical conductivity of CFRP laminates (1.15 S/cm) through vertical alignment of short CFs was compared to reference CFRP laminates (0.13 S/cm) and was found to dissipate the artificial lightning strike current more efficiently. The surface damage after the artificial lightning strike in the V-fiber composites was reduced to 12.69 cm 2 compared to the reference CFRP surface damage of 57.67 cm 2 , a 78% reduction. It was also demonstrated that Joule heat generated due to lightning strike on the composites was significantly less than the reference sample using infrared (IR) thermography. A high retention (up to 78%) of flexural properties (modulus and strength) was observed in V-fiber composites post lightning strike impact as compared to only 47% retention in the reference panel.

42 ENGINEERING↗
DOE OSTI2020

Internal arcing and lightning strike damage in short carbon fiber reinforced thermoplastic composites

Short carbon fiber reinforced thermoplastic composites (S-CFRTP) are currently used in interior parts of aircraft such as electronic circuitry and assemblies, and their usage in aircraft's exterior is also being studied. In this paper, we present a lightning strike study on S-CFRTPs. High performance thermoplastics such as a polyphenylene sulfide (PPS) reinforced with 50% weight (wt.) short carbon fiber (CF), a polyphenyl sulfone (PPSU) reinforced with 25 % wt. Short CF and a acrylonitrile butadiene styrene (ABS) with 20 % wt. short CF were tested against artificial lightning strikes. All samples were prepared using an extrusion compression molding (ECM) technique. A modified component A (100 kA) of lightning waveform, as defined by SAE ARP 5412-B, was applied. High speed imaging, thermography, scanning electron microscopy (SEM) and ultrasonic non-destructive evaluation were performed to understand the effect of lightning strikes on the thermoplastic panels. The results show that electrical conductivity of the composite, thermal stability of the polymers, and CF orientation significantly affected the damage from artificial lightning strikes. PPS composite had the highest resilience against lightning strike damage, retaining 95% and 89% residual flexural strength and modulus, respectively. CF exfoliation due to internal arcing was observed in the carbon fiber-reinforced ABS polymer (CF-ABS) composite. CF exfoliation damage has been reported for the first time.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Quantum Size Effects, Multiple Dirac Cones, and Edge States in Ultrathin Bi(110) Films

The presence of inherently strong spin–orbit coupling in bismuth, its unique layer-dependent band topology and high carrier mobility make it an interesting system for both fundamental studies and applications. Theoretically, it has been suggested that strong quantum size effects should be present in the Bi(110) films, with the possibility of Dirac Fermion states in the odd-bilayer (BL) films, originating from dangling p z orbitals and quantum-spin hall (QSH) states in the even-bilayer films. However, the experimental verification of these claims has been lacking. Here, we study the electronic structure of Bi(110) films grown on a high-T c superconductor, Bi 2 Sr 2 CaCu 2 O 8+δ (Bi2212) using angle-resolved photoemission spectroscopy (ARPES). We observe an oscillatory behavior of electronic structure with the film thickness and identify the Dirac-states in the odd-bilayer films, consistent with the theoretical predictions. In the even-bilayer films, we find another Dirac state that was predicted to play a crucial role in the QSH effect. In the low thickness limit, we observe several extremely one-dimensional states, probably originating from the edge-states of Bi(110) islands. Our results provide a much needed experimental insight into the electronic and structural properties of Bi(110) films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

First-Principles Assessment of ZnTe and CdSe as Prospective Tunnel Barriers at the InAs/Al Interface

Majorana zero modes are predicted to emerge in semiconductor/ superconductor interfaces, such as InAs/Al. Majorana modes could be utilized for fault tolerant topological qubits. However, their realization is hindered by materials challenges. The coupling between the superconductor and the semiconductor may be too strong for Majorana modes to emerge, due to effective doping of the semiconductor by the metallic contact. This could be mediated by adding a tunnel barrier of controlled thickness. We use density functional theory (DFT) with Hubbard U corrections, whose values are machine-learned via Bayesian optimization (BO), to assess ZnTe and CdSe as prospective tunnel barriers for the InAs/Al interface. The results of DFT +U(BO) for ZnTe are validated by comparison to angle resolved photoemission spectroscopy (ARPES). We then study bilayer interfaces of the three semiconductors with each other and with Al, as well as trilayer interfaces with a varying number of ZnTe or CdSe layers inserted between InAs and Al. We find that 16 atomic layers of either material completely insulate the InAs from metal induced gap states (MIGS). However, ZnTe and CdSe differ significantly in their band alignment, such that ZnTe forms an effective barrier for electrons, whereas CdSe forms a barrier for holes. Because of Fermi level pinning in the conduction band at the interface, only electron transport is relevant for InAs-based Majorana devices. Therefore, ZnTe is the better choice. Based on the results of our simulations, we suggest conducting experiments with ZnTe barriers in the thickness range of 6–18 atomic layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Spin Texture Control and Magnetic Gap Engineering in a Ferromagnetic Insulator–Topological Insulator Sandwiched Heterostructure

Quantum materials that combine magnetism with topological order are emerging as key platforms for next-generation spintronics and low-energy electronics. They enable the realization of emergent quantum phenomena, such as the quantum anomalous Hall effect and axion insulator states. The ferromagnetic insulator (FMI)/topological insulator (TI)/FMI sandwich structure of a single-septuple layer (1SL) MnBi 2 Te 4 /four-quintuple layer (4QL) Bi 2 Te 3 /1SL MnBi 2 Te 4 holds great potential to achieve such desirable quantum phenomena at an elevated temperature, owing to its large Dirac point band gap and high Curie temperature. Here, for this work, spin- and angle-resolved photoemission spectroscopy (spin-ARPES) is employed to directly verify that the band gap arises from broken time-reversal symmetry via proximity-driven magnetization. This study demonstrates direct control of the spin state via external magnetic fields and unambiguously confirms the exchange interaction as the gap-opening mechanism. The robust magnetic gap and controllable spin texture make this heterostructure a suitable candidate for spintronic applications and magnetic topological quantum phases.

exchange gap↗
DOE OSTI2021

Direct Visualization and Manipulation of Tunable Quantum Well State in Semiconducting Nb 2 SiTe 4

We report quantum well states (QWSs) can form at the surface or interfaces of materials with confinement potential. They have broad applications in electronic and optical devices such as high mobility electron transistor, photodetector, and quantum well laser. The properties of the QWSs are usually the key factors for the performance of the devices. However, direct visualization and manipulation of such states are, in general, challenging. In this work, by using angle-resolved photoemission spectroscopy (ARPES) and scanning tunneling microscopy/spectroscopy (STM/STS), we directly probe the QWSs generated on the vacuum interface of a narrow band gap semiconductor Nb 2 SiTe 4 . Interestingly, the position and splitting of QWSs could be easily manipulated via potassium (K) dosage onto the sample surface. Our results suggest Nb 2 SiTe 4 to be an intriguing semiconductor system to study and engineer the QWSs, which has great potential in device applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Evolution of Electronic Properties of Graphene Nanoribbons with Progressive Carving: From Straight to Porous to Chevron Ribbons

Graphene nanoribbons (GNRs) are highly versatile materials due to their unique electronic, magnetic, and optical properties, which can be precisely tuned by controlling their width, edge structure, and topology. Here, we report the on-surface synthesis and characterization of a straight N = 15 armchair GNR with periodic annulene nanopores (15-pGNR). It serves as a structural link between two well-established GNRs: the pristine N = 15 armchair GNR without pores (15-AGNR) and the chevron GNR (cGNR). With the addition of the 15-pGNR reported in this study, these three GNRs form a rare experimentally accessible series of ribbons, in which the evolution of electronic properties can be tracked upon progressive carving of a basic 15-AGNR: first, by creating periodic nanopores to form 15-pGNR and then by extending the pore area and producing meandering cGNR. We have designed a molecular precursor for the 15-pGNR and grown the nanoribbons on single-crystal gold substrates by on-surface synthesis in ultra-high vacuum (UHV) conditions. The atomically precise structure of 15-pGNR was confirmed by scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM). The band gap of 15-pGNR was studied by scanning tunneling spectroscopy (STS) and dI/dV mapping, and the occupied electronic levels were investigated by angle-resolved photoemission spectroscopy (ARPES). A theoretical and experimental comparison of 15-pGNRs, 15-AGNRs, and cGNRs demonstrates that the introduction of periodic nanopores into 15-AGNR leads to a more than 2-fold increase in its band gap. In contrast, the band gaps of 15-pGNR and cGNR differ only by about 15%. Such band gap increase can be qualitatively understood to arise from two combined effects, the periodic perforation of the graphene lattice and the confinement effect induced by the GNR width.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Negative Schottky Barriers and Spin-Polarized Fermi Crossings at WSe 2 /NbSe 2 Interfaces

Discovering and engineering spin-polarized surface states in the electronic structures of condensed matter systems is a crucial first step in the development of spintronic devices, wherein spin-polarized bands crossing the Fermi level can facilitate information transfer. Here, through nanofocused angle-resolved photoemission spectroscopy (nano-ARPES) and density functional theory-based calculations, we show that the interface between monolayer WSe 2 and metallic NbSe 2 exhibits a negative Schottky barrier height of ∼ −30 meV: the K-point valleys of the semiconducting layer are shifted by ∼800 meV to produce a surface-localized Fermi surface populated only by spin-polarized charge carriers. By increasing the WSe 2 thickness, the Fermi pockets can be moved from K to Γ, demonstrating tunability of novel semimetallic phases that exist atop a substrate additionally possessing charge density wave and superconducting phases. Together, this study provides a spectroscopic understanding into p-type, Schottky barrier-free interfaces, which are of urgent interest for bypassing the limitations of current-generation vertical field effect transistors, in addition to longer-term spintronics development.

2D material heterostructures↗