Search NASA⌕ Search

SEARCH · Search NASA

Results for “ASPECT RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Preliminary design characteristics of a subsonic business jet concept employing an aspect ratio 25 strut braced wing

The advantages of replacing the conventional wing on a transatlantic business jet with a larger, strut braced wing of aspect ratio 25 were evaluated. The lifting struts reduce both the induced drag and structural weight of the heavier, high aspect ratio wing. Compared to the conventional airplane, the strut braced wing design offers significantly higher lift to drag ratios achieved at higher lift coefficients and, consequently, a combination of lower speeds and higher altitudes. The strut braced wing airplane provides fuel savings with an attendant increase in construction costs.

Turriziani, R. V.↗
NASA NTRS1948

An Analysis of the Effects of Wing Aspect Ratio and Tail Location on Static Longitudinal Stability Below the Mach Number of Lift Divergence

An analysis is presented of the influence of wing aspect ratio and tail location on the effects of compressibility upon static longitudinal stability. The investigation showed that the use of reduced wing aspect ratios or short tail lengths leads to serious reductions in high-speed stability and the possibility of high-speed instability.

Axelson, John A.↗
NASA NTRS1947

Experimental and Calculated Characteristics of Several NACA 44-series Wings with Aspect Ratios of 8, 10, and 12 and Taper Ratios of 2.5 and 3.5

The aerodynamic characteristics of seven unswept tapered wings were determined by calculation from two-dimensional data and by wind-tunnel tests in order to demonstrate the accuracy of the calculations and to show some of the effects of aspect ratio, taper ratio, and root thickness-chord ratio. The characteristics were calculated by the usual application of the lifting-line theory which assumes linear section lift curves and also by an application of the theory which allows the use of nonlinear lift curves. A correction to the lift for the effect of chord was made by using the Jones edge-velocity factor. The wings had aspect ratios of 8, 10, and 12, taper ratios of 2.5 and 3.5, and NACA 44-series airfoils.

WINGS, TAPERED - CHARACTERISTICS↗
NASA NTRS1990

Effects of spoiler surfaces on the aeroelastic behavior of a low-aspect-ratio rectangular wing

An experimental research study to determine the effectiveness of spoiler surfaces in suppressing flutter onset for a low-aspect-ratio, rectangular wing was conducted in the Langley Transonic Dynamics Tunnel (TDT). The wing model used in this flutter test consisted of a rigid wing mounted to the wind-tunnel wall by a flexible, rectangular beam. The flexible beam was connected to the wing root and cantilever mounted to the wind-tunnel wall. The wing had a 1.5 aspect ratio based on wing semispan and a NACA 64A010 airfoil shape. The spoiler surfaces consisted of thin, rectangular aluminum plates that were vertically mounted to the wing surface. The spoiler surface geometry and location on the wing surface were varied to determine the effects of these parameters on the classical flutter of the wing model. Subsonically, the experiment showed that spoiler surfaces increased the flutter dynamic pressure with each successive increase in spoiler height or width. This subsonic increase in flutter dynamic pressure was approximately 15 percent for the maximum height spoiler configuration and for the maximum width spoiler configuration. At transonic Mach numbers, the flutter dynamic pressure conditions were increased even more substantially than at subsonic Mach numbers for some of the smaller spoiler surfaces. But greater than a certain spoiler size (in terms of either height or width) the spoilers forced a torsional instability in the transonic regime that was highly Mach number dependent. This detrimental torsional instability was found at dynamic pressures well below the expected flutter conditions. Variations in the spanwise location of the spoiler surfaces on the wing showed little effect on flutter. Flutter analysis was conducted for the basic configuration (clean wing with all spoiler surface mass properties included). The analysis correlated well with the clean wing experimental flutter results.

Cole, Stanley R.↗
NASA NTRS2002

Etching of Silicon in HBr Plasmas for High Aspect Ratio Features

Etching in semiconductor processing typically involves using halides because of the relatively fast rates. Bromine containing plasmas can generate high aspect ratio trenches, desirable for DRAM and MEMS applications, with relatively straight sidewalk We present scanning electron microscope images for silicon-etched trenches in a HBr plasma. Using a feature profile simulation, we show that the removal yield parameter, or number of neutrals removed per incident ion due to all processes (sputtering, spontaneous desorption, etc.), dictates the profile shape. We find that the profile becomes pinched off when the removal yield is a constant, with a maximum aspect ratio (AR) of about 5 to 1 (depth to height). When the removal yield decreases with increasing ion angle, the etch rate increases at the comers and the trench bottom broadens. The profiles have ARs of over 9:1 for yields that vary with ion angle. To match the experimentally observed etched time of 250 s for an AR of 9:1 with a trench width of 0.135 microns, we find that the neutral flux must be 3.336 x 10(exp 17)sq cm/s.

Hwang, Helen H.↗
NASA NTRS1951

Effect of Taper Ratio on the Low-speed Rolling Stability Derivatives of Swept and Unswept Wings of Aspect Ratio 2.61

Results of tests conducted in the 6-foot-diameter rolling-flow test section of the Langley stability tunnel to determine the effects of varying taper ratio on the rolling and static stability characteristics of a swept wing are presented; results are also given for the effects of varying taper ratio on an unswept wing and for the effects of sweep on a tapered wing. All the models were of aspect ratio 2.61 and had NACA 0012 sections normal to the quarter-chord line. Taper ratios of 1.00, 0.50, and 0.25 and sweep angles of 0 degrees and 45 degrees were investigated.

WINGS, COMPLETE - SWEEP↗
NASA NTRS1984

Computational-experimental pressure distributions on a transonic, low-aspect-ratio wing

A generic, transonic, supercritical, low aspect-ratio wing was tested at design incidence of 5 deg at Mach numbers from 0.25 to 0.96. Oil-flow studies at the design Mach number of 0.85 showed local-flow separation, which, in retrospect, might have been avoided. At Mach 0.82 with unseparated flow, the surface-flow angles were less than 10 deg. Predictions with the FLO22 transonic potential code are good. Lift interference is strong without tunnel-wall suction. Evidence from this study shows that wings that are optimized for mild shock waves and pressure-recovery gradients generally have small, three-dimensional flow at conditions for unseparated flow.

Keener, E. R.↗
NASA NTRS1992

A critical evaluation of a three-dimensional Navier-Stokes method as a tool to calculate transonic flows inside a low-aspect-ratio compressor

A numerical study to evaluate a three-dimensional Navier-Stokes method as a tool to predict the detailed flow field inside a low-aspect-ratio compressor at various operating conditions was conducted. The details of the flow structure inside a low aspect ratio compressor (three-dimensional shock structure, shock-boundary layer interaction, and tip leakage vortex) and the overall aerodynamic performance at design and off-design conditions are numerically analyzed and the results are compared with the available experimental data. The flow field inside a state-of-the-art transonic compressor is used for the purpose of the evaluation.

Hah, Chunill↗
NASA NTRS1992

Low aspect ratio wings at high angles of attack

A survey is conducted of the results of investigations into the flowfields and aerodynamic forces associated with low aspect ratio wings at high angles of attack. Attention is given to criteria for the cataloging of these flowfields, the phenomenon of vortex breakdown, with varying wing incidence and Mach number, and the effects of aspect ratio and compressibility. The planforms treated are of rectangular, clipped-delta, and strake-wing combination geometries. Extensive graphic representations of performance trends with varying parameters are furnished.

Stallings, Robert L., Jr.↗
NASA NTRS1957

Static Longitudinal and Lateral Stability Characteristics at Low Speed of 45 Degree Sweptback-midwing Models Having Wings with an Aspect Ratio of 2, 4, or 6

Results are presented of tests conducted in the Langley stability tunnel to determine the effects of various components and combinations of components on the static longitudinal and lateral stability characteristics at low speed of a series of 45 degree sweptback-midwing-airplane configurations having wings with an aspect ratio of 2, 4, or 6. The tests were made at a dynamic pressure of 24.9 pounds per square foot which corresponds to a Mach number of 0.13 and Reynolds numbers of 1.00 x 10(exp 6), 0.71 x 10 (exp 6), and 0.58 x 10 (exp 6) based on the respective wing mean aerodynamic chords. The angle-of-attack range covered was from -4 degrees to 32 degrees and the sideslip angles used for the lateral-derivative tests were 5 degrees and -5 degrees. An increasing loss in tail contribution to directional stability both with increasing wing aspect ratio and increasing angle of attack was found to be a principal cause of all the complete models becoming directionally unstable in the high angle-of-attack range.

STABILITY, LONGITUDINAL - STATIC↗
NASA NTRS1979

Effects of diffusion factor, aspect ratio and solidity on overall performance of 14 compressor middle stages

A series of high hub tip radius ratio compressor stages representative of the middle and latter stages of axial flow compressors is discussed. The effects of aspect ratio, diffusion factor, and solidity on rotor and stage performance are determined. Fourteen middle stages are tested to study the effects on performance of varying both diffusion through the rotor and stator blades and blade aspect ratio. The design parameters in the streamline analysis program, the blade geometry program, and the blade coordinate program are presented.

Britsch, W. R.↗
NASA NTRS1988

High Rayleigh number convection in rectangular enclosures with differentially heated vertical walls and aspect ratios between zero and unity

High Rayleigh number convection in a rectangular cavity with insulated horizontal surfaces and differentially heated vertical walls was analyzed for an arbitrary aspect ratio smaller than or equal to unity. Unlike previous analytical studies, a systematic method of solution based on linearization technique and analytical iteration procedure was developed to obtain approximate closed-form solutions for a wide range of aspect ratios. The predicted velocity and temperature fields are shown to be in excellent agreement with available experimental and numerical data.

Kassemi, Siavash A.↗
NASA NTRS1950

Low-speed pitching derivatives of low-aspect-ratio wings of triangular and modified triangular plan forms

A low-speed investigation was made in the 6- by 6-foot curved-flow test section of the Langley stability tunnel to determine the effects of change in profile and aspect ratio on the pitching derivatives of triangular wings. The effects of aspect ratio on the pitching derivatives of a series of modified triangular wings, obtained by cutting various portions from the tips of a basic triangle, also were determined. Values of the damping-in-pitch parameter (Cmq) obtained for the triangular and modified triangular wings were one-fifth to one-tenth as large as the value expected for a typical airplane.

Goodman, Alex↗
DOE OSTI2024

Development of a high performance MagLIF target platform using high aspect ratio coated liners and low-mix laser preheat

We report on a series of Magnetized Liner Inertial Fusion (MagLIF) experiments conducted on the Z pulsed power facility that utilized high aspect ratio (ratio of outer radius to wall thickness) liners with dielectric coatings and low-mix laser preheat configurations. The liners consisted of an aspect ratio of 10.6 beryllium tube coated with 75 μm of epoxy on the outside that have been shown to maintain a better implosion stability than uncoated beryllium and have demonstrated consistent stagnation performances in previous experiments [Ampleford et al., Phys. Plasmas 31, 022703 (2024)]. Two-dimensional HYDRA simulations were used to design three different “co-injection” laser configurations, whereby a second laser is used to provide an early prepulse before the main pulse, to reduce LEH foil mix while increasing the fuel density and coupled energy. The laser preheat energy for each configuration was constrained using dedicated laser experiments before being applied to the integrated MagLIF experiments on Z. The DD neutron yield for experiments using co-injection preheat configurations is found to increase with the specific preheat energy in line with simulations. The highest neutron yield achieved in this study of 1.1 × 10 13 matches the highest reported in a MagLIF experiment to date and is a factor 3.5 times higher than similar experiments using preheat with no phase plate smoothing. We attempt to assess the effects of mix and morphology to explain the improved performance; however, neither factor is found to be conclusive within the uncertainty of the measurements.

Harvey-Thompson, A. J.↗
NASA NTRSDate not supplied

High Fidelity Adaptively Refined CFD and Reduced Order Models of a High Aspect Ratio Aeroelastic Wing Wind-Tunnel Model

The NASA Advanced Air Transport Technology (AATT) goal of reduced fuel burn for transport aircraft has led to the NASA N+3 High Aspect Ratio Wing (HARW) subproject. This project requires identifying, developing, and demonstrating key technologies and integrated multidisciplinary solutions to enable a safe, high performance, aeroelastic wing. Since this aircraft will have a high aspect ratio wing, aeroelasticity is expected to be a major issue in the design. In this paper high fidelity computational fluid dynamics (CFD) is performed with flow adapted meshes. A system identification of the aerodynamics is developed using both a multi-modal multi-sine time-marching and a multi-mode linear frequency domain method. GLA, MLA and flutter suppression simulations will be performed.

Robert Bartels↗