Search NASA⌕ Search

SEARCH · Search NASA

Results for “ATMOSPHERIC CONDUCTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Studies of Helium Behavior in Uranium Hexafluoride

Several issues have arisen from experimental observations and/or theoretical postulation related to the behavior of helium in uranium hexafluoride (UF 6 ) matrices and how it may impact the ability to use this noble gas to quantify the fill date of the cylinder. A series of experiments was conducted to address several such issues, and the results and implications are reported here. Two issues relate to bias in the helium measurement due to ambient air from extraneous sources such as atmospheric air or from potential holdup in a large, activated alumina chemical trap. These issues are really a question of differential retention of helium versus three other inert gas isotopes (representative of other noble gases found in air) used as a calibration for air in leakage. Discernable bias was not detected in either case. Another issue had to do with helium potentially brought into the cylinder by a liquid UF 6 fill and subsequently released as the material solidifies and/or during storage. The solubility of helium in liquid UF 6 was measured to investigate this theory. The experiment quantified the potential magnitude of the initial helium contribution if present. The final issue was that of retention of helium in solid UF 6 . Investigation of this theory necessitated quantifying both the solubility and the diffusivity of helium in UF 6 . In one experiment, the solubility was measured at cryogenic temperature, allowing quantification of helium in solid UF 6 such as would be found in a cold trap. In a second experiment, transport of helium into and through a macroscopic plug of solid UF 6 was examined. The transport was very slight although apparently detectible. Effectively, only an upper limit to the transport could be determined, but that limit implied that helium holdup in solid UF 6 is a real possibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Dataset for "Enrichment of phosphates, lead, and mixed soil-organic particles in INPs at the Southern Great Plains site"

Ice nucleating particles (INPs) are rare particles that initiate primary ice formation, a critical step required for subsequent important cloud microphysical processes that ultimately govern cloud phase and cloud radiative properties. Laboratory studies have found that organic-rich dusts, such as those found in soils, are more efficient INPs compared to mineral dust. However, the atmospheric relevance of these organic-rich dusts are not well understood, particularly in regions with significant agricultural activity. The Agricultural Ice nuclei at the Southern Great Plains field campaign (AGINSGP) was conducted in rural Oklahoma to investigate how soil dusts contribute to INP populations in the Great Plains. We present chemical characterization of ambient and ice crystal residual particles from a single day of sampling using single particle mass spectrometry (SPMS) and scanning microscopy. Ambient particle concentrations were primarily carbonaceous or secondary aerosol, while dust particles were enhanced in the residual particles. Dust particles measured during residual sampling contained elevated signals for phosphate ($^{63}$PO$_2^-$ and $^{79}$PO$_3^-$) and lead ($^{208}$Pb$_2^+$). Nitrate was slightly depleted relative to ambient dust, and strong sulfate signals were not seen in the residual particles measured by the miniSPLAT. The residual and ambient particles measured by the miniSPLAT were approximately the same size, though this may be a reflection of the SPMS size-dependent transmission efficiency and not that of physical truth. This study shows that organic-rich soils may be important contributors to the ambient INP population in agricultural regions.

Cornwell, Gavin C↗
DOE OSTI2026

Observations of the Marine Atmospheric Boundary Layer’s Response to a Solar Eclipse

The atmospheric response to the solar eclipse of 8 April 2024 in North America is investigated with a specific focus on the marine atmospheric boundary layer (MABL). We leverage measurements collected during the Third Wind Forecast Improvement Project (WFIP3), including Doppler lidars, sonic anemometers, and thermodynamic profiler data to investigate the atmospheric response across sites that experienced partial eclipse conditions with nearly 90% obscuration. Using these measurements, we examine eclipse-induced changes in key meteorological parameters, such as temperature, wind speed, and turbulent fluxes. Most previous eclipse studies have been conducted over land, whereas this study provides new observations for both coastal and marine environments, offering additional insight into eclipse-driven variability in the MABL. The findings confirm a notable decrease in downwelling shortwave radiation during the eclipse, which results in rapid cooling of surface air. The temperature reduction ranges from $1.2^\circ \text {C}$ to $1.4^\circ \text {C}$ in coastal regions and from $0.3^\circ \text {C}$ to $0.5^\circ \text {C}$ over the ocean. This analysis suggests that the MABL’s higher thermal inertia compared to coastal regions moderates the temperature decrease during the eclipse. Wind speed exhibits a more complex behavior, as it is influenced by both the MABL and preexisting synoptic conditions. Although a reduction in wind speed is observable up to approximately 140 m above ground level (AGL) at more inland sites, at other locations closer to the coast, this reduction is constrained to the lowest 100 m AGL. Turbulence parameters retrieved from sonic anemometers, such as turbulence kinetic energy, turbulent heat flux, and friction velocity, decrease during the eclipse at coastal sites, accompanied by a brief transition of atmospheric stability from unstable to neutral or weakly stable conditions. For the open-ocean sites, the variability in turbulence statistics and atmospheric stability is minimal during the occurrence of the eclipse.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

An analysis of parameters affecting ampacity in aircraft bipolar MVDC power cables via coupled electrical, thermal, and computational fluid dynamic modelling

Abstract The next generation of aircraft, including more electric aircraft and all‐electric aircraft (AEA), requires electric power systems with high power density and low system mass specifications. Increasing the voltage of the system to the range of a few kV, medium voltage (MV), is a reasonable approach to achieving high‐power‐density and low‐system‐mass EPSs for aircraft applications. Higher voltages, however, pose many challenges for aviation MV power cables such as arcs and arc tracking, partial discharges (PDs), and thermal management. In this regard, thermal management is more challenging since heat transfer by convection is greatly reduced at wide‐body aircraft's cruising altitudes due to the reduced air pressure. In this paper, a finite element method (FEM) model is developed in COMSOL Multiphysics for an aircraft bipolar MVDC (±5 kV) power cable. Using the model, the maximum permissible cable current at a low pressure of 18.8 kPa (at an altitude of 12.2 km from sea level, the usual cruising altitude for wide‐body aircraft) is calculated. Also, an analytical model is developed based on analytical and proven empirical correlations governing conductive, radiative, and convective heat transfers at the steady state to estimate the ampacity of the bipolar cable system at reduced pressure. It was shown that the proposed analytical model can be used for atmospheric pressure and systems with a larger number of poles, expanding its range of applications. The results of the FEM and analytical models correlate at wide ranges of parameters such as ambient temperature, duct size, distance between the positive and negative pole cables, and the overall diameter of the cables. The influence of horizontal and vertical arrangement of poles is included in the analytical model. The results of this study can be used to design bipolar MVDC power cable systems for the envisaged wide‐body AEA.

Azizi, Arian↗
DOE OSTI2024

Monitoring of ground water table depth and soil moisture at the Point Reyes field site

Ground water table (GWT) depth and soil moisture (SM) have been monitored at several locations at the Point Reyes field site (Californian coastal grassland) from 2021 to 2024. Monitoring is still on-going and data may be added to this archive at later time. The SM data have been acquired using Teros 12 Meter soil moisture sensors placed at 10, 30, 60 and 90 cm depth at 5 locations along a small hillslope. These sensors also collect soil temperature and bulk conductance. In addition, some collocated sensors provide pore pressure and Photochemical Reflectance Index (PRI). The GWT depth has been inferred from various type of Onset pressure transducers. The pressure measurements have been corrected for atmospheric pressure variations and sensor position relative to the ground surface to infer GWT depth, as well as with RTK GPS data to infer GWT elevation. The GWT data have been acquired at 5 distinct locations from 2020 to 2024 with the sensors placed at about 4 m depth. In addition, GWT data has been acquired for the 2023-2024 period with sensors located in 1 m deep shallow wells installed near each deeper well. This data is intended to evaluate possibly different dynamic in shallow (perched) and deep aquifer. The datasets are all provided in csv format. Please note that the interpretation of the GWT data needs to be done with consideration of environmental and well characteristics at the site and uncertainty in various variables. For more information on GWT and SM data, please contact the author.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Long‐Term Large‐Scale Atmospheric Forcing Data From Three‐Dimensional Constrained Variational Analysis for the ARM SGP Site

Here, this study presents a long‐term three‐dimensional large‐scale forcing data set (VARANAL3D) derived from the three‐dimensional constrained variational analysis (3DCVA) method at the Atmospheric Radiation Measurement (ARM) program Southern Great Plains (SGP) site from 2004 to 2018. Building on the same input data sets as the conventional continuous forcing data set (VARANAL), VARANAL3D maintains overall consistency in domain‐averaged fields while introducing spatial variability, offering critical insights into the influence of mesoscale synoptic systems on cloud‐related processes. Evaluations are conducted across four cloud and precipitation regimes: Clear‐sky, Shallow‐clouds, Afternoon‐precipitation, and Nocturnal‐precipitation, presenting high consistency of the domain‐mean forcing data sets while emphasizing the role of subdomain forcing variability particularly in precipitating regimes. Single column model (SCM) simulations demonstrate that subdomain VARANAL3D forcing improves cloud and precipitation representation, with the ensemble outperforming domain‐mean forcing in three cloudy and precipitating regimes. Overall, these results highlight VARANAL3D's value for investigating the impacts of spatial variability of large‐scale forcing on atmospheric processes. The VARANAL3D data set provides new opportunities for evaluating model physics, advancing the development of scale‐aware parameterizations and deepening our understanding of cloud and precipitation dynamics.

Environmental sciences↗
DOE OSTI2025

Exploring Flood Predictability in Taiwan through Coupled Atmospheric–Hydrological and High-Performance Hydrodynamic Models

Effective flood simulation capabilities can tremendously support early warning and disaster prevention. To examine the applicability of a fully physics-based and high-performance flood simulation and forecasting modeling framework for a flood-prone region in Taiwan, we conduct a numerical experiment that couples the Weather Research and Forecasting (WRF) Model, WRF-Hydrological modeling system (WRF-Hydro), and the Two-Dimensional Runoff Inundation Toolkit for Operational Needs (TRITON) to perform integrated rainfall, streamflow, and flood simulations. Furthermore, we first use the coupled WRF and WRF-Hydro (WWH) to predict rainfall and streamflow and then drive TRITON with the predicted streamflow hydrographs to simulate flood depth and inundation area. With the refined spatial resolution and parameterization, this framework can better predict rainfall with reasonable spatial patterns. Although WWH could overestimate the amount of rainfall in some areas, the uncertain rainfall–streamflow predictions produce reasonable flood maps able to pinpoint regions at risk of flooding. In terms of model efficiency, the graphics processing unit–based computation can yield a speed-up factor as high as ∼13 compared to the central processing unit–based computation, promoting the efficacy of the coupled modeling framework in practical real-time flood forecasting.

Coupled models↗
DOE OSTI2025

Impact of grassland fire dynamics on particulate emission factors

Understanding particulate emission factors in grassland fires is critical for improving air quality assessments and refining emissions inventories. This study explores the dynamic and heterogeneous nature of fire processes and their influence on particulate emissions. Traditional emission factor inventories often rely on static values, overlooking the spatially and temporally variable dynamics of fire behavior. Through field experiments conducted at Konza Prairie Biological Station measuring emissions with uncrewed aerial vehicles, and computational modeling using HIGRAD/FIRETEC, this research highlights the dependency of emission production on localized fire dynamics, including ignition patterns, fuel properties, and atmospheric conditions. The results demonstrate a need for fire dynamic considerations to accurately capture emissions variability.

09 BIOMASS FUELS↗
DOE OSTI2025

Real-Time Characterization of Salt Aerosols Generated from Static and Sparged Molten Salt

The formation of radionuclide-bearing aerosols in the respirable size range has the potential to significantly influence offsite dose consequences and is, therefore, an important consideration in nuclear facility safety assessments. Molten salt reactor (MSR) developers will likely need to demonstrate an understanding of the conditions under which radionuclide-bearing aerosols may be generated from their reactor under normal operating and accident conditions, as well as the characteristics and transport behavior of these aerosols, to demonstrate to the U.S. Nuclear Regulatory Commission (NRC) that the facility can be operated safely. Recent reviews of the literature identified a lack of experimental data describing the mechanisms of formation and properties (size, concentration, and composition) of salt aerosol particles that are produced from molten salts. Experiments that identify the conditions that lead to radionuclide-bearing salt aerosol releases and quantify the characteristics of salt aerosols formed by different mechanisms are high-priority needs to support MSR licensing. This report describes tests that were conducted within the Argonne Salt Aerosol Test Stand (a sealed vessel and measurement system) to generate salt aerosols from static and sparged molten salts and measure their size and concentration in real-time. The results provide insight into salt aerosol formation by the vapor condensation and bubble bursting mechanisms and inform the potential radiological consequences of aerosol formation from molten fuel salt. Videos of the salt surface were taken during salt sparge tests to observe surface bubble behavior. The data in this report can be used to develop mechanistic source term and accident progression models for MSRs. The real-time salt aerosol characterization technique used in this study will be employed in future integral effects tests that are conducted at an engineering scale to simulate realistic MSR accidents and in future separate effects tests to address additional variables that may impact salt aerosol characteristics (e.g., presence of fission products in salt and humidity in atmosphere).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Two-dimensional mapping of absolute OH densities in an atmospheric pressure plasma effluent via planar laser-induced fluorescence: effects of He/H 2 O and He/O 2 mixtures in N 2 and air, with and without solid targets

Planar laser-induced fluorescence (LIF) was employed to measure the absolute density of hydroxyl radicals (OH) in the effluent of the COST Reference Microplasma Jet for two feed gas mixtures: He/H 2 O and He/O 2 . Experiments were conducted with the effluent propagating into air and N 2 environments. For the He/H 2 O case, measurements were also performed with the effluent impinging on a solid target at varying distances from the jet nozzle. Calibration of the OH-LIF signal from the COST-Jet was achieved by comparing it to a reference signal generated by the photofragmentation of H 2 O 2 . Results demonstrated that OH densities were sustained longer when the effluent propagates in a nitrogen environment compared to air, particularly with water added to the feed gas. The broader OH distribution in N 2 suggests slower consumption due to the absence of oxygen, which accelerates OH depletion in air via reactions involving O 2 and HO 2 . Even when water was not added to the feed, as in the He/O 2 case, appreciable OH densities were observed, due to gas impurities and reactive species interactions with atmospheric humidity, forming reaction fronts that delineate the gas flow. Two-dimensional fluid dynamics simulations elucidated the influence of atmospheric gas entrainment and solid targets on the OH distribution. Experimental trends were further compared with a zero-dimensional chemistry model to explore OH production and consumption mechanisms in air and nitrogen environments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Small-scale Assessment of Simplified Ceramic Waste Form Processing

The feasibility of directly processing glass-bonded sodalite ceramic waste form materials by heating a mixture of Zeolite 4A, chloride salt, and sodium borosilicate binder glass was demonstrated by generating laboratory-scale materials. This direct processing method eliminates pre-setting the moisture content of the Zeolite 4A, eliminates the step of occluding salt in the prepared Zeolite 4A prior to processing, and can be conducted using larger particle sizes of crushed Zeolite 4A and crushed borosilicate glass than those called for in the current method. These simplifications are expected to facilitate material transfer and handling in a hot cell or controlled atmosphere environment and be more readily implemented at large scale than the current method. Most materials made to assess these simplifications were directly processed at 925 °C for two hours in an argon atmosphere glovebox, but one material was processed at 925 °C for four hours and one material was processed at 880 °C for two hours. Sodalite was generated and became microencapsulated by the binder glass in all materials. The microstructures were uniform throughout each product, were similar in all products, and were similar to the microstructures of materials made previously using the pressureless consolidation or hot isostatic pressing methods. Various formulations showed the efficiency of sodalite generation was not sensitive to the salt-to-Zeolite 4A ratio or salt-to-glass mass ratio, although a greater relative mass of glass is required to encapsulate sodalite generated from large particles of aggregated Zeolite 4A. The upper limit of salt loadings that can be effectively processed remains to be determined. The effectiveness of direct processing provided new insights into the conversion mechanism. The salt was likely dissolved into the glass that transported NaCl into the Zeolite 4A aggregates and sodalite was generated in situ as NaCl migrated from the outside of the aggregate inward. Other salt cations (e.g., potassium, strontium, cesium, and probably lithium) remain dissolved in the glass encapsulating the zeolite/sodalite domains. When the glass solidifies during cooling, small halite inclusion phases form in glass within sodalite domains and large mixed salt inclusions form in glass surrounding the sodalite due to the low solubility of chloride in the (solid) glass. Other salt cations were oxidized during processing and formed inclusions in the bulk glass (e.g., neodymium). Initial degradation tests show the dissolution behavior of directly processed CWF (SCWF) materials is similar to CWF materials made using different methods.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

CRADA Number NFE-22-09333 with Holocene Climate Corporation (CRADA Final Report:)

Holocene Climate Corporation has developed and scaled up a novel technology for Direct Air Capture (DAC) that is based on cutting-edge research initiated at Oak Ridge National Laboratory (ORNL). According to the IPCC, carbon dioxide capture from the air and its sequestration are necessary to keep global temperature rise below 1.5°C by 2050. DAC is a viable and practical way to reach this goal. DAC can happen anywhere in the world, takes up a fraction of the land of forests, and along with the sequestration of CO 2 , provides permanent and verifiable removal of carbon from the atmosphere. The proposed project aimed to facilitate knowledge transfer from ORNL to Holocene focusing on (i) the synthesis of the ORNL patented material which builds the cornerstone of the DAC technology, and (ii) required analytical methods needed to conduct crystallization bench-scale experimentation and technology development. Furthermore, ORNL conducted research centered around CO 2 absorption using an air-liquid contacting structure with an aqueous amino acid solution. The achievements under this project comprise successful knowledge transfer from ORNL to the entire Holocene team to jump-start their internal R&D and technological development activities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Improved method for temporally interpolating radiosonde profiles in the convective boundary layer

A significantly improved technique for temporally interpolating radiosonde (RS) profiles of potential temperature and water vapor mixing ratio in the planetary boundary layer during daytime is introduced. The key innovation of this technique is its operation on a height grid normalized with the planetary boundary layer height. This study utilized a three-month dataset of three-hourly soundings from the Atmospheric Radiation Measurement Facility's Southern Great Plains site. The technique was evaluated for convective boundary layer cases, with the necessary boundary layer height data obtained from a ground-based infrared spectrometer. A total of 79 comparisons were conducted between reference soundings and interpolated profiles that did and did not employ height normalization. The results demonstrated a substantial improvement in the representation of interpolated profiles using the new technique, characterized by enhanced correlation, improved amplitude representation, and reduced bias for potential temperature, as well as improved correlation and reduced bias for water vapor mixing ratio.

convective boundary layer↗
DOE OSTI2024

Effects of Surface Turbulence Flux Parameterizations on the MJO: The Role of Ocean Surface Waves

This study investigates the sensitivity of the Madden–Julian oscillation (MJO) to changes to the bulk flux parameterization and the role of ocean surface waves in air–sea coupling using a fully coupled ocean–atmosphere–wave model. The atmospheric and ocean model components of the Energy Exascale Earth System Model (E3SM) are coupled to a spectral wave model, WAVEWATCH III (WW3). Two experiments with wind speed–dependent bulk algorithms (NCAR and COARE3.0a) and one experiment with wave-state-dependent flux (COR3.0a-WAV) were conducted. We modify COARE3.0a to include surface roughness calculated within WW3 and also account for the buffering effect of waves on the relative difference between air-side and ocean-side momentum flux. Differences in surface fluxes, primarily caused by discrepancies in drag coefficients, result in significant differences in MJO’s properties. While COARE3.0a has better convection–circulation coupling than NCAR, it exhibits anomalous MJO convection east of the date line. The wave-state-dependent flux (COR3.0-WAV) improves the MJO representation over the default COARE3.0 algorithm. Strong easterlies over the Pacific Ocean in COARE3.0a enhance the latent heat flux (LHFLX). This is responsible for the anomalous MJO propagation after the date line. In COR3.0a-WAV, waves reduce the anomalous easterlies, leading to a decrease in LHFLX and MJO dissipation after the date line. These findings highlight the role of surface fluxes in MJO simulation fidelity. Most importantly, we show that the proper treatment of wave-induced effects in bulk flux parameterization improves the simulation of coupled climate variability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Additive manufacturing of mullite ceramic by digital light processing

Mullite material was successfully additively manufactured using digital light processing (DLP). The printed geometry involves a one-step process of pyrolysis, de-binding, and sintering under a plain atmosphere to achieve an average of 76 % ceramic yield and linear shrinkage of 12 %. Furthermore, the thermal profile was carefully controlled to obtain consistent phases in which the XRD shows a mullite phase. Here, in addition, the Weibull analysis was conducted on the sintered flexural specimens, showing a Weibull modulus (m) of 13.05 with a characteristic strength (σ 0 ) of 94.96 MPa. Synchrotron microtomography was performed on the sintered specimens, which showed two distinct porosity distributions (small and large). Large porosity (non-spherical elongated) is the primary cause of decreased material strength, while small porosity (spherical) is the sintering product. The measured thermal conductivity of the specimens was in the range of 2.7–3.1 W/m∙k and decreased with an increase in temperature. Lastly, large-scale prototypes were printed concurrently with a fine resolution of 25 μm without any compromise on the predetermined design and structure.

Additive manufacturing↗
DOE OSTI2026

Chemical beneficiation of cobaltiferous pyrite: a thermodynamic and parametric study

Despite ongoing efforts to identify substitute materials, cobalt remains indispensable for the production of rechargeable batteries essential to the global energy transition. Currently, most cobalt is sourced as a by-product of nickel and copper extraction from politically and ethically unstable regions. To address this vulnerability, certain primary cobalt deposits—where cobalt occurs within the crystal lattice of pyrite (FeS 2 )—have been identified as potential alternatives. Nonetheless, conventional beneficiation methods have proven largely ineffective for the potential processing of these minerals. This study investigated the thermal decomposition of cobaltiferous pyrite contained in flotation concentrates as a subsequent chemical beneficiation stage aimed at (i) selectively removing sulfur to further increase cobalt grades and (ii) producing a ferromagnetic product suitable for downstream magnetic separation. A thermodynamic analysis was first conducted to evaluate the feasibility of the decomposition reactions and the temperature-dependent evolution of sulfur species. A parametric experimental study then assessed the influence of temperature, residence time, and gas flow rate under N 2 and CO 2 atmospheres. Under the most favorable experimental conditions tested (650 °C, 15 min), cobalt grades increased by up to 15% with negligible cobalt losses and the co-production of high-purity sulfur (>95%). Magnetic separation of the resulting calcine yielded a final concentrate containing 2.09% cobalt at 82.5% recovery, representing a 16–74% improvement over previous baseline studies on similar feedstocks.

Beneficiation↗
DOE OSTI2025

Proposal from the NA61/SHINE Collaboration for update of European Strategy for Particle Physics

Building on the current program's success and driven by new physics challenges, the NA61/SHINE Collaboration proposes to continue measuring hadron production properties in reactions induced by hadron and ion beams after CERN Long Shutdown 3. These measurements are of significant interest to the heavy-ion, cosmic-ray, and neutrino physics communities and will focus on: - Investigating hadron production in the light-ion systems to explore the diagram of high-energy nuclear collisions, and to obtain new insight into the unexpected violation of isospin (flavor) symmetry recently observed by the experiment; - Measuring charm-anticharm correlations to gain unique insights into the production locality of charm and anticharm quark pairs; - Examining strangeness and multi-strangeness production to improve our understanding of the early Universe's evolution and neutron star formation; - Measuring cross sections relevant for cosmic-ray measurements, significantly boosting searches for new physics in our Galaxy; - Conducting hadron production measurements with proton, pion, and kaon beams for neutrino physics, enhancing the precision of hadron production data needed for initial neutrino flux predictions in neutrino oscillation experiments; - Measuring hadron production processes relevant for understanding the flux of atmospheric neutrinos, as well as neutrinos and muons from spallation sources. To achieve these objectives, a detector upgrade and a beam upgrade are required, with data-taking planned for the period 2029-2032 and beyond.

Adhikary, H. [Jan Kochanowski U.] (ORCID:000000025↗
DOE OSTI2026

Flame Characterization and Flashback Studies of Hydrogen-Enriched Low-Swirl Flames Using High-Speed OH-PLIF

Here, this paper reports the flashback mechanism observed in hydrogen-enriched flames stabilized in a low-swirl burner (LSB) at atmospheric temperature and pressure. The fundamentals of hydrogen-rich stable flames and spatiotemporal information of flashback phenomena were observed experimentally using a high-repetition-rate nanosecond (ns)-duration hydroxyl planar laser-induced fluorescence (OH-PLIF) diagnostic. Testing was conducted for methane and hydrogen (50–90%H 2 , by mole) blends in an optically accessible LSB premixer with measured swirl numbers varying from 0.43 to 0.49. The flashback propensity showed dependence on liftoff length, which was dependent on premixer velocity (𝑉), hydrogen content (𝑋 H 2 ), and equivalence ratio (𝜙) at constant temperature and pressure. High-speed OH-PLIF images revealed that lifted flames were first observed at low 𝜙/𝑋 H 2 conditions, which were changed to an M-shaped flame attached to the burner rim with an increase in 𝜙/𝑋 H 2 . A further increase in 𝜙/𝑋 H 2 triggered the flame flashback into the premixer. Flame 𝜙 at flashback (𝜙 FB ) showed an expected linearly increasing trend with increasing 𝑉 and decreasing 𝑋 H 2 , and the conclusions drawn aligned well with detailed liftoff length investigations. The 𝜙 FB increased with increasing perforated plate hole diameter and increasing swirler vane angle. The vane angle had little effect on flashback tendency at high premixer velocity.

combustion↗