Search NASA⌕ Search

SEARCH · Search NASA

Results for “ATMOSPHERIC EXPLOSIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

National Center for Nuclear Security - NCNS

As the United States embarks on a new era of nuclear arms control, the tools for treaty verification must be accurate and reliable, and must work at stand-off distances. The National Center for Nuclear Security, or NCNS, at the Nevada National Security Site, is poised to become the proving ground for these technologies. The center is a unique test bed for non-proliferation and arms control treaty verification technologies. The NNSS is an ideal location for these kinds of activities because of its multiple environments; its cadre of experienced nuclear personnel, and the artifacts of atmospheric and underground nuclear weapons explosions. The NCNS will provide future treaty negotiators with solid data on verification and inspection regimes and a realistic environment in which future treaty verification specialists can be trained. Work on warhead monitoring at the NCNS will also support future arms reduction treaties.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Observational Evidence for Wind‐Driven Low‐Pass Filtering of Infrasound at Short Range

Infrasound from controlled explosions provides a unique opportunity to isolate atmospheric effects on propagation. We report observations from two campaigns in May and October 2024, each featuring 10‐ton TNT‐equivalent controlled surface chemical explosions recorded by a dense network of 31 single‐sensor stations within 23 km. Despite identical sources, the observed wavefields were very different. October signals followed a near‐unimodal period–distance trend, whereas May signals exhibited a pronounced azimuthal bifurcation in both period and celerity. Downwind paths largely preserved the short‐period baseline observed in October, while upwind paths showed systematically longer periods caused by wind‐driven low‐pass filtering. This study provides the first direct observational evidence that tropospheric winds can impose azimuth‐dependent low‐pass filtering at local ranges, without the influence of measured temperature inversions. Thus, the structure of the atmosphere can modify the spectral characteristics of low‐frequency acoustic waves even at a distance of only a few kilometers.

Geosciences↗

Source Term Estimation of Radioxenon Released from the Fukushima Dai-ichi Nuclear Reactors Using Measured Air Concentrations and Atmospheric Transport Modeling

Systems designed to monitor airborne radionuclides released from underground nuclear explosions detected radioactive fallout from the Fukushima Daiichi nuclear accident in March 2011. Atmospheric transport modeling (ATM) of plumes of noble gases and particulates were performed soon after the accident to determine plausible detection locations of any radioactive releases to the atmosphere. We combine sampling data from multiple International Modeling System (IMS) locations in a new way to estimate the magnitude and time sequence of the releases. Dilution factors from the modeled plume at five different detection locations were combined with 57 atmospheric concentration measurements of 133-Xe taken from March 18 to March 23 to estimate the source term. This approach estimates that 59% of the 1.24×1019 Bq of 133-Xe present in the reactors at the time of the earthquake was released to the atmosphere over a three day period. Source term estimates from combinations of detection sites have lower spread than estimates based on measurements at single detection sites. Sensitivity cases based on data from four or more detection locations bound the source term between 35% and 255% of available xenon inventory.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Explosive Byproduct Gas Transport Through Sorptive Geomedia

Current underground nuclear explosion (UNE) detection strategies rely heavily on atmospheric noble gas sampling of radioxenon. However, discriminating nuclear weapons testing programs from civilian sources is difficult due to highly variable atmospheric radioxenon backgrounds and processes affecting subsurface transport of parent radionuclides. Here, we aim to study the transport of gases produced by subsurface explosions as novel stable signatures for underground nuclear explosion (UNE) monitoring. These gases may be produced in large quantities with distinct molecular ratios, which will be impacted by subsurface transport processes. To demonstrate how ratios of gases produced by explosions can change during transport in geomaterials, we conducted laboratory benchtop experiments on the transport of carbon dioxide (CO 2 ) and hydrogen (H 2 ) gases through variably saturated zeolitic tuff, which is abundant at the historic US testing site. We observed that zeolitic tuff sorbs substantial quantities of CO 2 while allowing H 2 to transport more freely, leading to changes in the molecular ratios of the two gases along the transport pathway. Gas uptake in the dry zeolitic tuff core was 72.3% for CO 2 , compared with 53.4% for xenon and 7.6% for H 2 . The presence of 20% water saturation disrupted the CO 2 sorption process, though to a lesser extent than observed for noble gases, with a 36.7% drop in xenon sorption compared with a 21.9% drop for CO 2 . These results represent the first observations of zeolite sorption altering explosive gas ratios during transport through geomedia relevant to nuclear proliferation monitoring.

54 ENVIRONMENTAL SCIENCES↗

Challenges in simulating ground interacting nuclear explosions

This paper summarizes recent above-ground nuclear explosion simulations as part of a broader effort to better characterize conditions within a fireball that may influence the chemical evolution of bomb materials and other materials entrained from the local explosion environment. A critical component of this work is validation against historic footage of atmospheric testing, requiring that we understand how the frequency-dependent sensitivity of the utilized film footage influences data captured in such images. We focus first on the early physics of a nuclear explosion in the atmosphere before discussing some of the technical challenges we seek to capture in late-time models that include more complex emplacement conditions and subsurface features. We discuss required physics packages (compressible hydrodynamics, radiation transport, as well as necessary ancillary tables such as equations of state (EOS) and opacities). Additionally, we note reasonable “shortcuts” one may make and their limitations, e.g., using ideal gas EOS, replacing spectrally resolved radiation with spectrally averaged radiation, and exchanging deterministic transport with diffusion. We then discuss an approach to achieving an equilibrated initial stress state for problems where buoyancy and subsurface lithostatic stress are important. Our methodology is presented in the context of LLNL’s ALE3D multiphysics code but may readily be implemented in other codes. In this paper, we start with a description of the challenges of NUDET simulations, followed by a presentation of the simulated intensity (flux) as it would appear on an analysis of the Dixie test. We then progressively introduce additional complexity in subsequent sections (near-surface burst and gravity initialization) before concluding.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

A comparison of smartphone and infrasound microphone data from a fuel air explosive and a high explosive

For prompt detection of large (>1 kt) above-ground explosions, infrasound microphone networks and arrays are deployed at surveyed locations across the world. Denser regional and local networks are deployed for smaller explosions, however, they are limited in number and are often deployed temporarily for experiments. With the expanded interest in smaller yield explosions targeted at vulnerable areas such as population centers and key infrastructures, the need for more dense microphone networks has increased. An “attritable” (affordable, reusable, and replaceable) and flexible alternative can be provided by smartphone networks. Explosion signals from a fuel air explosive (thermobaric bomb) and a high explosive with trinitrotoluene equivalent yields of 6.35 and 3.63 kg, respectively, were captured on both an infrasound microphone and a network of smartphones. The resulting waveforms were compared in time, frequency, and time-frequency domains. The acoustic waveforms collected on smartphones produced a filtered explosion pulse due to the smartphone's diminishing frequency response at infrasound frequencies (<20 Hz) and was found difficult to be used with explosion characterization methods utilizing waveform features (peak overpressure, impulse, etc.). However, the similarities in time frequency representations and additional sensor inputs are promising for other explosion signal identification and analysis. As an example, a method utilizing the relative acoustic amplitudes for source localization using the smartphone sensor network is presented.

47 OTHER INSTRUMENTATION↗

Volatile Transport by Volcanic Plumes on Earth, Venus and Mars

Explosive volcanic eruptions can produce sustained, buoyant columns of ash and gas in the atmosphere (Fig. 1). Large flood basalt eruptions may also include significant explosive phases that generate eruption columns. Such eruptions can transport volcanic volatiles to great heights in the atmosphere. Volcanic eruption columns can also redistribute chemical species within the atmosphere by entraining ambient atmosphere at low altitudes and releasing those species at much higher altitudes.

Glaze, Lori S.↗

Application of blast wave theory to explosive propulsion

An analysis was carried out by using blast wave theory to delineate the important aspects of detonating explosives in nozzles, such as flow and wave phenomena, characteristic length and time scales, and the parameters on which the specific impulse is dependent. The propulsive system utilizes the momentum of the ambient gas set into motion in the nozzle by the explosion. A somewhat simplified model was considered for the situation where the mass of ambient gas in the nozzle is much greater than the mass of gas produced in the explosion, a condition of interest for dense atmospheres, e.g., near the surface of Venus. Instantaneous detonation and energy release was presumed to occur at the apex of a conical nozzle, and the shock wave generated by the explosion was taken to propagate as a spherical wave, thereby setting the ambient gas in the nozzle into one-dimensional radially outward motion.

Back, L. H.↗

Observations and Modeling of the Onset of Fast Reconnection in the Solar Transition Region

Magnetic reconnection is a fundamental plasma process that plays a critical role not only in energy release in the solar atmosphere, but also in fusion, astrophysics, and other space plasma environments. One of the challenges in explaining solar observations in which reconnection is thought to play a critical role is to account for the transition of the dynamics from a slow quasi-continuous phase to a fast and impulsive energetic burst of much shorter duration. Despite the theoretical progress in identifying mechanisms that might lead to rapid onset, a lack of observations of this transition has left models poorly constrained. High-resolution spectroscopic observations from NASA's Interface Region Imaging Spectrograph now reveal tell-tale signatures of the abrupt transition of reconnection from a slow phase to a fast, impulsive phase during UV bursts or explosive events in the Sun's atmosphere. Our observations are consistent with numerical simulations of the plasmoid instability, and provide evidence for the onset of fast reconnection mediated by plasmoids and new opportunities for remote-sensing diagnostics of reconnection mechanisms on the Sun.

79 ASTRONOMY AND ASTROPHYSICS↗

Seismoacoustic Analysis of the Large Surface Explosion Coupling Experiment Using a Large- N Seismic Array

Seismoacoustic signals at local distance (<~10 km) are widely used as important constraints on source parameters for near-surface events, yet the seismoacoustic wave generation and energy partitioning are not fully understood. Spatially dense sensors could provide observations in high resolution to capture the full wavefield for better understanding wave propagation and improving source estimation. Recently, spatially dense observations of the local seismoacoustic wavefield produced by a pair of 1-ton surface explosions have been recorded using a large-N seismic array. This large-N array consists of 446 geophones and covers an area of approximately 2×2.5 km 2 . The two surface explosions occur at the same location but at different times with different atmospheric conditions. Both seismic and air–ground coupled acoustic waves from the two surface explosions are well observed. Analyses of signals recorded by the large-N seismic array show different acoustic wave speed and amplitude for the two explosions. A strong spatial variability in acoustic wave speed and amplitude for each explosion is also observed. Finally, the observations suggest the important role of local atmosphere state on wave propagation and source estimation and demonstrate how the use of a large-N capability can improve characterization of the propagation medium and source.

58 GEOSCIENCES↗

Excitation of electron Langmuir frequency harmonics in the solar atmosphere

An alternative mechanism for the excitation of electron Langmuir frequency harmonics as a result of the development of explosive instability in a weakly relativistic beam-plasma system in the solar atmosphere is proposed. The efficiency of the new mechanism as compared to the previously discussed ones is analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural-Phase States of Fe–Cu and Fe–Ag Bimetallic Particles Produced by Electric Explosion of Two Wires

X-ray phase analysis, transmission electron microscopy, and X-ray microanalysis were used to examine the structural-phase states of Fe–Cu and Fe–Ag bimetallic nanoparticles. The nanoparticles were obtained by the electric explosion of two twisted metal wires in argon atmosphere. It was demonstrated that the nanoparticles have the structure of Janus particles. Presence of the Janus particle structure in the samples indicates formation of binary melt under conditions of combined electric explosion of two wires. Phases based on supersaturated solid solutions were not found in the examined samples. The data obtained allow arguing that it is possible to achieve uniform mixing of the two-wire explosion products under the described experiment conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Type IIb supernova SN 2011dh: Spectra and photometry from the ultraviolet to the near-infrared

We report spectroscopic and photometric observations of the Type IIb SN 2011dh obtained between 4 and 34 days after the estimated date of explosion (May 31.5 UT). The data cover a wide wavelength range from 2000 Å in the ultraviolet (UV) to 2.4 μm in the near-infrared (NIR). Optical spectra provide line profiles and velocity measurements of H I, He I, Ca II, and Fe II that trace the composition and kinematics of the supernova (SN). NIR spectra show that helium is present in the atmosphere as early as 11 days after the explosion. A UV spectrum obtained with the Space Telescope Imaging Spectrograph reveals that the UV flux for SN 2011dh is low compared to other SN IIb. Modeling the spectrum with SYNOW suggests that the UV deficit is due to line blanketing from Ti II and Co II. The H I and He I velocities in SN 2011dh are separated by about 4000 km s{sup –1} at all phases. A velocity gap is consistent with models for a preexplosion structure in which a hydrogen-rich shell surrounds the progenitor. We estimate that the H shell of SN 2011dh is ≈8 times less massive than the shell of SN 1993J and ≈3 times more massive than the shell of SN 2008ax. Light curves (LCs) for 12 passbands are presented: UVW2, UVM2, UVW1, U, u', B, V, r', i', J, H, and K{sub s} . In the B band, SN 2011dh reached peak brightness of 13.17 mag at 20.0 ± 0.5 after the explosion. The maximum bolometric luminosity of 1.8 ± 0.2 × 10{sup 42} erg s{sup –1} occurred ≈22 days after the explosion. NIR emission provides more than 30% of the total bolometric flux at the beginning of our observations, and the NIR contribution increases to nearly 50% of the total by day 34. The UV produces 16% of the total flux on day 4, 5% on day 9, and 1% on day 34. We compare the bolometric LCs of SN 2011dh, SN 2008ax, and SN 1993J. The LC are very different for the first 12 days after the explosions, but all three SN IIb display similar peak luminosities, times of peak, decline rates, and colors after maximum. This suggests that the progenitors of these SN IIb may have had similar compositions and masses, but they exploded inside hydrogen shells that have a wide range of masses. SN 2011dh was well observed, and a likely progenitor star has been identified in preexplosion images. The detailed observations presented here will help evaluate theoretical models for this SN and lead to a better understanding of SN IIb.

79 ASTRONOMY AND ASTROPHYSICS↗

Implications of Underground Nuclear Explosion Cavity Evolution for Radioxenon Isotopic Composition

Abstract Isotopic ratios of radioxenons sampled in the atmosphere or subsurface can be used to verify the occurrence of an underground nuclear explosion (UNE). Differences in the half-lives of radioactive xenon precursors and their decay-chain networks produce different time-dependent concentration profiles of xenon isotopes allowing isotopic ratios to be used for tracking UNE histories including estimating the time of detonation. In this study, we explore the potential effects of post-detonation cavity processes: precipitation of iodine precursors, gas seepage, and prompt venting on radioxenon isotopic evolution which influences UNE histories. Simplified analytical models and closed-form solutions yielding a potentially idealized radioactive decay/ingrowth chain in a closed and well-mixed system typically have limited application by not including the partitioning of the radionuclide inventory between a gas phase and rock melt created by the detonation and by ignoring gas transport from the cavity to host rock or ground surface. In reality, either subsurface transport or prompt release that is principally responsible for gas signatures violates the closed-system (or batch-mode) assumption. A closed-form solution representing time-dependent source-term activities is extended by considering the cavity partitioning process, slow seepage, and/or prompt release of gases from the cavity and applied to realistic systems.

Sun, Yunwei (ORCID:0000000194801439)↗

Illuminating the North Korean nuclear explosion test in 2017 using remote infrasound observations

North Korea conducted its sixth underground nuclear explosion test (mb 6.3) on 2017 September 3. The underground explosion produced substantial low-frequency atmospheric waves, which were detected by infrasound arrays located up to a distance of 566 km. These infrasound waves are formed by the conversion of seismic energy to acoustic energy across the lithosphere–atmosphere interface. While infrasound records at regional distances produce estimates of ground motion amplitude over spatially extended regions covering about 26 500 km 2 , 3-D full seismo-acoustic simulations within the lithosphere and atmosphere provide quantitative information about seismo-acoustic energy partitioning. Our results demonstrate the capability of remote infrasound observations combined with 3-D propagation modelling to further develop discrimination methods for underground sources. These results contribute to enhance the confidence of source identification and characterization in nuclear test monitoring research, which is essential for the enforcement of the Comprehensive Nuclear-Test-Ban Treaty.

58 GEOSCIENCES↗

Explosion-Generated Infrasound Recorded on Ground and Airborne Microbarometers at Regional Distances

Recent work in deploying infrasound (low–frequency sound) sensors on aerostats and free–flying balloons has shown them to be viable alternatives to ground stations. However, no study to date has compared the performance of surface and free–floating infrasound microbarometers with respect to acoustic events at regional (100s of kilometers) range. The prospect of enhanced detection of aerial explosions at similar ranges, such as those from bolides, has not been investigated either. We examined infrasound signals from three 1–ton trinitrotoluene (TNT) equivalent chemical explosions using microbarometers on two separate balloons at 280– to 400–km ranges and ground stations at 6.3– to 350–km ranges. Signal celerities were consistent with acoustic waves traveling in the stratospheric duct. However, significant differences were noted between the observed arrival patterns and those predicted by an acoustic propagation model. Very low–background noise levels on the balloons were consistent with previous studies that suggest wind interference is minimal on freely drifting sensors. In conclusion, simulated propagation patterns and observed noise levels also confirm that balloon–borne microbarometers should be very effective at detecting explosions in the middle and upper atmosphere as well as those on the surface.

58 GEOSCIENCES↗

Pressure waves generated by steady flames.

Analysis of pressure waves that can be generated by clouds of explosive gas mixtures in a free atmosphere which is initially at a uniform state. The treatment is restricted only to the final stage of constant flame velocity when the flowfield is self-similar. By the introduction of reduced blast-wave parameters as phase-plane coordinates, the problem is resolved into the determination of the appropriate integral curves on this plane. Results, including space profiles of gasdynamic parameters, have been computed for a specific case of a hydrocarbon-air mixture characterized by a specific heat ratio of 1.3, sound speed at NTP of 345 m/sec, and volumetric expansion ratio corresponding to constant pressure deflagration of 7. Maximum overpressure ratios that can be generated by such flames in point-and line-symmetrical waves range from .00053, for the lower bound in the burning speed, up to 6 for the deflagration, while, for the average speeds of 5 to 10 m/sec, they are at a level of 0.05 to 0.10.

Kuhl, A. L.↗