Search NASA⌕ Search

SEARCH · Search NASA

Results for “Advanced Architectures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

REACH: Real-Time Data Awareness in Multi-Spacecraft Missions

NASA's Advanced Architectures and Automation Branch at the Goddard Space Flight Center (Code 588) saw the potential to reduce the cost of constellation missions by creating new user interfaces to the ground system health-and-safety data. The goal is to enable a small Flight Operations Team (FOT) to remain aware and responsive to the increased amount of ground system information in a multi-spacecraft environment. Rather than abandon the tried and true, these interfaces were developed to run alongside existing ground system software to provide additional support to the FOT. These new user interfaces have been combined in a tool called REACH. REACH-the Real-time Evaluation and Analysis of Consolidated Health-is a software product that uses advanced visualization techniques to make spacecraft anomalies easy to spot, no matter how many spacecraft are in the constellation. REACH reads numerous real-time streams of data from the ground system(s) and displays synthesized information to the FOT such that anomalies are easy to pick out and investigate.

Maks, Lori↗

Ultraviolet Laser Activation of Phosphorus-Doped Polysilicon Layers for Crystalline Silicon Solar Cells

In crystalline silicon photovoltaics (c-Si PV), a pulsed laser can be used as a substitute for a high-temperature furnace dopant diffusion/activation step. In contrast to furnace-based activation, lasers can be used to achieve highly localized doping with controlled dopant concentrations, useful in advanced architectures such as the interdigitated back contact (IBC) solar cell. In this study, a pulsed ultraviolet (UV) laser is utilized for phosphorus dopant activation within a low-pressure chemical vapor deposited (LPCVD) polycrystalline silicon (poly-Si) passivated contact layer. The highest implied open-circuit voltage iV oc values achieved using this approach reach 726 mV. However, this comes at the expense of high specific contact resistivities ρ c , which is attributed to a lower dopant concentration across the poly-Si(n + )/SiO x /c-Si interface. Regardless, the optimum iV oc , ρ c combination is measured at a laser fluence of 0.78 J cm -2 producing values of 712 mV and 89 mΩ-cm 2 , respectively. These values are still compatible with high-efficiency solar cell designs, underscoring the feasibility and effectiveness of this approach.

14 SOLAR ENERGY↗

Enabling fast charging of lithium-ion batteries through secondary-/dual- pore network: Part II - numerical model

To increase the market share of electric vehicles, it is desirable to reduce the battery charge times, which are significantly limited by poor electrolyte transport. A high rate charging is achievable by using expensive and low energy density cells with thin electrodes. For higher energy density cells, new electrolytes with improved conductivity and diffusivity and/or electrodes with advanced architecture are required to boost the electrolyte transport, leading to a more uniform utilization of active materials. In our previous work, an analytical model was developed to investigate the effect of secondary pore network (SPN) on electrolyte transport and the configuration of SPN was optimized by enforcing equal characteristic diffusion times in through-plane and in-plane directions. Here, to evaluate the effect of SPN on the fast-charging capability of lithium-ion batteries, a 2D physics-based electrochemical model is developed with SPN in either one or both electrodes. Additionally, the effect of SPN on cell energy density and lithium plating is investigated for cells with different loadings and electrode porosities. Combining SPN with elevated charging temperatures, the model predicts that the volumetric discharge energy density of a 3 mA h/cm2 cell can reach 270 Wh/L after a 6C constant-current charging.

25 ENERGY STORAGE↗

Porting Ordinary Applications to Blue Gene/Q Supercomputers

Efficiently porting ordinary applications to Blue Gene/Q supercomputers is a significant challenge. Codes are often originally developed without considering advanced architectures and related tool chains. Science needs frequently lead users to want to run large numbers of relatively small jobs (often called many-task computing, an ensemble, or a workflow), which can conflict with supercomputer configurations. In this paper, we discuss techniques developed to execute ordinary applications over leadership class supercomputers. We use the high-performance Swift parallel scripting framework and build two workflow execution techniques-sub-jobs and main-wrap. The sub-jobs technique, built on top of the IBM Blue Gene/Q resource manager Cobalt's sub-block jobs, lets users submit multiple, independent, repeated smaller jobs within a single larger resource block. The main-wrap technique is a scheme that enables C/C++ programs to be defined as functions that are wrapped by a high-performance Swift wrapper and that are invoked as a Swift script. We discuss the needs, benefits, technicalities, and current limitations of these techniques. We further discuss the real-world science enabled by these techniques and the results obtained.

Maheshwari, Ketan C.↗

Investigating the Impact of Thickness, Calendering and Channel Structures of Printed Electrodes on the Energy Density of LIBs - 3D Simulation and Validation

Current lithium ion batteries (LIBs) are expensive and bulky, limited by relatively low charging rates. To increase the rate of charging and reduce weight, thin electrodes with high energy density are required. The increase in energy density can be achieved by several techniques including boosting electrolyte transport, high loading/utilization of active material, employing high conductive electrolytes and electrodes with advanced architectures, and increasing cell temperature. In this paper, a 3D physics-based electrochemical model of LIBs is developed in COMSOL simulation software for different thickness, calendering steps as well as channel structures (conical, cylindrical) to optimize the electrode design and in turn maximize volumetric energy density. The simulation results demonstrated that calendering the electrodes with high initial porosity increases the volumetric energy density of the cell. In addition, cylindrical channel structures with relatively lower edge-to-edge distance also results in increased volumetric energy density. The simulation results of the 3D model was validated by comparing it with experimental results.

improving volumetric energy density↗

Scaling the Ion Trap Quantum Processor

Trapped atomic ions are standards for quantum information processing, serving as quantum memories, hosts of quantum gates in quantum computers and simulators, and nodes of quantum communication networks. Quantum bits based on trapped ions enjoy a rare combination of attributes: They have exquisite coherence properties, they can be prepared and measured with nearly 100% efficiency, and they are readily entangled with each other through the Coulomb interaction or remote photonic interconnects. The outstanding challenge is the scaling of trapped ions to hundreds or thousands of qubits and beyond, at which scale quantum processors can outperform their classical counterparts in certain applications. We review the latest progress and prospects in that effort, with the promise of advanced architectures and new technologies, such as microfabricated ion traps and integrated photonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Umpire: Application-Focused Management and Coordination of Complex Hierarchical Memory

Advanced architectures like Sierra provide a wide range of memory resources that must often be carefully controlled by the user. These resources have varying capacities, access timing rules, and visibility to different compute resources. Applications must intelligently allocate data in these spaces, and depending on the total amount of memory required, applications may also be forced to move data between different parts of the memory hierarchy. Finally, applications using multiple packages must coordinate effectively to ensure that each package can use the memory resources it needs. To address these challenges, we present Umpire, an application-oriented library for managing memory resources. Specifically, Umpire provides support for querying memory resources, provisioning and allocating memory, and memory introspection. It allows computer scientists and computational physicists to efficiently program the memory hierarchies of current and future high-performance computing architectures, without tying their application to specific hardware or software. In this paper, we describe the design and implementation of Umpire and present case studies from the integration of Umpire into applications that are currently running on Sierra.

97 MATHEMATICS AND COMPUTING↗

Portage, Version 2.0

Portage is a software library system for physics remapping (mapping physics variables from one computational mesh to another) either within a single simulation code or between two disparate simulation codes. Portage is designed to utilize advanced-architecture compute platforms and to be easily extensible by third parties.

Herring, Angela↗

Pececillo

Pececillo is a proxy-app for the open source Truchas metal processing code (LA-CC-15-097). It implements many of the physics models used in Truchas: free-surface, incompressible Navier-Stokes fluid dynamics (e.g., water waves); heat transport, material phase change, view factor thermal radiation; species advection-diffusion; quasi-static, elastic/plastic solid mechanics with contact; electomagnetics (Maxwell's equations). The models are simplified versions that retain the fundamental computational complexity of the Truchas models while omitting many non-essential features and modeling capabilities. The purpose is to expose Truchas algorithms in a greatly simplified context where computer science problems related to parallel performance on advanced architectures can be more easily investigated. While Pececillo is capable of performing simulations representative of typical Truchas metal casting, welding, and additive manufacturing simulations, it lacks many of the modeling capabilites needed for real applications.

Jibben, Zechariah↗

Overview of the CoCoMANS Project, with a focus on Algorithms and a Paradigm Shift [Slides]

Project Goals are: 1. Demonstrate a paradigm shift in the simulation approach to each application on an advanced architecture. 2. Deliver a documented computational co-design knowledge-base, built upon an evolving software infrastructure 3. Foster broad, long-term research collaborations with appropriate hardware partners 4. Deepen understanding of, and our experience-base with, consistent, two-way, scale-bridging algorithms.

97 MATHEMATICS AND COMPUTING↗

Integrating Fault-Tolerance into the Monte Carlo Application Toolkit

High-performance computer systems have passed the petascale mark, and the next decade will witness a drive towards exascale systems. Extrapolating from current hardware trends it is evident that exascale class systems will require a significantly larger number of cores than current petascale systems, and advanced architectures which include heterogeneous processors are gaining popularity. Such an increase in component count will decrease system mean time to interrupt (MTTI), resulting in greater emphasis on application fault tolerance. The additional memory requirements of exascale systems combined with the slow increase in hard drive write bandwidth will exclude current checkpoint/restart (C/R) techniques as a reliable means of fault tolerance. The current C/R approach to handling failures typically aborts the entire application and requires restarting the application, which is clearly an inefficient solution when utilizing 1000+ processors. Unless improvements are made in resilience and fault tolerance, it is predicted that the work throughput on the largest supercomputers could drop below 10% by 2015. As part of the ”Application Enablement for Next Generation Platforms” milestone, we addressed the shortcomings and limitations of C/R by developing a fault-tolerant component which would be integrated into the Monte Carlo Application Toolkit (MCATK) and demonstrated the ability to continue static K-effective calculations even in the presence of multiple processor failures. In section 2, we provide details about the milestone tasks. Section 3 describes the fault-tolerant framework, its integration into MCATK and its failure recovery scheme. We also describe FT-MPI, a fault-tolerant MPI implementation which provides the capabilities needed for an MPI-based application to survive and continue past failures. Section 4 reports future work that we hope to build upon the current accomplishments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Computing NLTE Opacities -- Node Level Parallel Calculation

Presentation. The goal: to produce a robust library capable of computing reasonably accurate opacities inline with the assumption of LTE relaxed (non-LTE). Near term: demonstrate acceleration of non-LTE opacity computation. Far term (if funded): connect to application codes with in-line capability and compute opacities. Study science problems. Use efficient algorithms that expose many levels of parallelism and utilize good memory access patterns for use on advanced architectures. Portability to multiple types of hardware including multicore processors, manycore processors such as KNL, GPUs, etc. Easily coupled to radiation hydrodynamics and thermal radiative transfer codes.

Astronomy & Astrophysics(79)↗

ASC Tri-lab Co-design Level 2 Milestone Report 2015

In 2015, the three Department of Energy (DOE) National Laboratories that make up the Advanced Sci- enti c Computing (ASC) Program (Sandia, Lawrence Livermore, and Los Alamos) collaboratively explored performance portability programming environments in the context of several ASC co-design proxy applica- tions as part of a tri-lab L2 milestone executed by the co-design teams at each laboratory. The programming environments that were studied included Kokkos (developed at Sandia), RAJA (LLNL), and Legion (Stan- ford University). The proxy apps studied included: miniAero, LULESH, CoMD, Kripke, and SNAP. These programming models and proxy-apps are described herein. Each lab focused on a particular combination of abstractions and proxy apps, with the goal of assessing performance portability using those. Performance portability was determined by: a) the ability to run a single application source code on multiple advanced architectures, b) comparing runtime performance between \native" and \portable" implementations, and c) the degree to which these abstractions can improve programmer productivity by allowing non-portable implementation details to be hidden from the application developer. This report captures the work that was completed for this milestone, and outlines future co-design work to be performed by application developers, programming environment developers, compiler writers, and hardware vendors.

97 MATHEMATICS AND COMPUTING↗

An Early Quantum Computing Proposal

The D-Wave 2X is the third generation of quantum processing created by D-Wave. NASA (with Google and USRA) and Lockheed Martin (with USC), both own D-Wave systems. Los Alamos National Laboratory (LANL) purchased a D-Wave 2X in November 2015. The D-Wave 2X processor contains (nominally) 1152 quantum bits (or qubits) and is designed to specifically perform quantum annealing, which is a well-known method for finding a global minimum of an optimization problem. This methodology is based on direct execution of a quantum evolution in experimental quantum hardware. While this can be a powerful method for solving particular kinds of problems, it also means that the D-Wave 2X processor is not a general computing processor and cannot be programmed to perform a wide variety of tasks. It is a highly specialized processor, well beyond what NNSA currently thinks of as an “advanced architecture.”A D-Wave is best described as a quantum optimizer. That is, it uses quantum superposition to find the lowest energy state of a system by repeated doses of power and settling stages. The D-Wave produces multiple solutions to any suitably formulated problem, one of which is the lowest energy state solution (global minimum). Mapping problems onto the D-Wave requires defining an objective function to be minimized and then encoding that function in the Hamiltonian of the D-Wave system. The quantum annealing method is then used to find the lowest energy configuration of the Hamiltonian using the current D-Wave Two, two-level, quantum processor. This is not always an easy thing to do, and the D-Wave Two has significant limitations that restrict problem sizes that can be run and algorithmic choices that can be made. Furthermore, as more people are exploring this technology, it has become clear that it is very difficult to come up with general approaches to optimization that can both utilize the D-Wave and that can do better than highly developed algorithms on conventional computers for specific applications. These are all fundamental challenges that must be overcome for the D-Wave, or similar, quantum computing technology to be broadly applicable.

97 MATHEMATICS AND COMPUTING↗

Update on Small Modular Reactors Dynamic System Modeling Tool: Web Application

Previous reports focused on the development of component and system models as well as end-to-end system models using Modelica and Dymola for two advanced reactor architectures: (1) Advanced Liquid Metal Reactor and (2) fluoride high-temperature reactor (FHR). The focus of this report is the release of the first beta version of the web-based application for model use and collaboration, as well as an update on the FHR model. The web-based application allows novice users to configure end-to-end system models from preconfigured choices to investigate the instrumentation and controls implications of these designs and allows for the collaborative development of individual component models that can be benchmarked against test systems for potential inclusion in the model library. A description of this application is provided along with examples of its use and a listing and discussion of all the models that currently exist in the library.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

FY17Q4 Ristra project: Release Version 1.0 of a production toolkit

The Next Generation Code project will release Version 1.0 of a production toolkit for multi-physics application development on advanced architectures. Features of this toolkit will include remap and link utilities, control and state manager, setup, visualization and I/O, as well as support for a variety of mesh and particle data representations. Numerical physics packages that operate atop this foundational toolkit will be employed in a multi-physics demonstration problem and released to the community along with results from the demonstration.

97 MATHEMATICS AND COMPUTING↗

Milestone Completion Report STCO04-1 AAPS: engagements with code teams, vendors, collaborators, developers

The Advanced Architecture and Portability Specialists team (AAPS) worked with a select set of LLNL application teams to develop and/or implement a portability strategy for next-generation architectures. The team also investigated new and updated programming models and helped develop programming abstractions targeting maintainability and performance portability. Significant progress was made on both fronts in FY17, resulting in multiple applications being significantly more prepared for the nextgeneration machines than before.

97 MATHEMATICS AND COMPUTING↗

Computer Science Research Institute (CSRI) Summer Proceedings 2013

The Computer Science Research Institute (CSRI) brings university faculty and students to Sandia National Laboratories for focused collaborative research on computer science, computational science, and mathematics problems that are critical to the mission of the laboratories, the Department of Energy, and the United States. The CSRI provides a mechanism by which university researchers learn about and impact national— and global—scale problems while simultaneously bringing new ideas from the academic research community to bear on these important problems. A key component of CSRI programs over the last decade has been an active and productive summer program where students from around the country conduct internships at CSRI. Each student is paired with a Sandia staff member who serves as technical advisor and mentor. The goals of the summer program are to expose the students to research in mathematical and computer sciences at Sandia and to conduct a meaningful and impactful summer research project with their Sandia mentor. Every effort is made to align summer projects with the student's research objectives and all work is coordinated with the ongoing research activities of the Sandia mentor in alignment with Sandia technical thrusts. For the 2013 CSRI Proceedings, research articles have been organized into the following broad technical focus areas — Computational Mathematics and Algorithms, Combinatorial Algorithms and Visualization, Advanced Architectures and Systems Software, Computational Applications — which are well aligned with Sandia's strategic thrusts in computer and information sciences.

97 MATHEMATICS AND COMPUTING↗