Results for “Aircraft Stability” — Page 8

NASA NTRS1990

Improving system reliability through formal analysis and use of checks in software

Software is playing increasingly important roles in avionics systems. It is widely used in navigation and, in some cases, in control loops that maintain aircraft stability. To guarantee the safety of flight systems, the FAA requires that critical components have a probability of failure no greater than 10(exp -9) per hour of flight. Software is being used to diagnose system components for failure. SIFT (Software Implemented Fault Tolerance) was a computer system developed to study the use of software to check for failure and manage processor reconfiguration. To guarantee that software satisfies its specifications, formal verification can be used. With this a program and its specification are viewed as mathematical objects, and a mathematical proof is used to show that the program and its specification are equivalent. In previous research, a theory of checking was developed to offer assistance in analyzing specifications and designing run-time checks. In the theory, checking is considered abstractly in terms of n-ary relations much like those of relational database theory. Within the theory check are categorized, checks on input and checks on results are considered, and formal attention is given to the minimization and logical combination of checks. The focus is upon input checks and the obstacles in checking input to critical systems. A central concern is with a property referred to as independence. The concern is with circumstances under which it is possible to apply isolated, independent checks to separate sensor inputs and be assure that all illegal input will be properly detected. Presently, independence is being investigated and checked in the context of the GCS (Guidance and Control System). The GCS simulator is intended for testing software that implements control laws for landing spacecraft. The large number of inputs and their complex interrelationships provide an exciting context in which to investigate independence and the difficulties of supplying input checks.

Staknis, Mark E.↗

NASA NTRS1990

Integrated flight-propulsion control concepts for supersonic transport airplanes

Increased powerplant thrust and reduced fuel consumption are obtainable by controlling engine stall margins as a function of flight and engine operating conditions. An evaluation is presently conducted of the performance improvements obtainable by these means in SSTs. It is noted that inlet pressure recovery increases and inlet drag reductions are obtainable via inlet control system integration; the use of propulsion system forces and moments to augment the flight control and aircraft stabilization system can also reduce empennage areas, weights, and drag. Special control modes may be instituted for community noise minimization and emergency procedures.

Burcham, Frank W., Jr.↗

NASA NTRS1992

Aeronautical engineering: A continuing bibliography with indexes (supplement 280)

This bibliography lists 647 reports, articles, and other documents introduced into the NASA scientific and technical information system in June, 1991. Subject coverage includes: aerodynamics, air transportation safety, aircraft communication and navigation, aircraft design and performance, aircraft instrumentation, aircraft propulsion, aircraft stability and control, research facilities, astronautics, chemistry and materials, engineering, geosciences, computer sciences, physics, and social sciences.

Source record↗

NASA NTRS1995

Stable H(infinity) Controller Design for the Longitudinal Dynamics of an Aircraft

This report discusses different approaches to stable H infinity controller design applied to the problem of augmenting the longitudinal dynamics of an aircraft. Stability of the H infinity controller is investigated by analyzing the effects of changes in the performance index weights, and modifications in the measured outputs. The existence of a stable suboptimal controller is also investigated. It is shown that this is equivalent to finding a stable controller, whose infinity norm is less than a specified bound, for an unstable plant which is determined from parametrization of all H infinity controllers. Examples are given for a gust alleviation and a command tracking problem.

Oezbay, Hitay↗

NASA NTRS2000

Intelligence Applied to Air Vehicles

The exponential growth in information technology has provided the potential for air vehicle capabilities that were previously unavailable to mission and vehicle designers. The increasing capabilities of computer hardware and software, including new developments such as neural networks, provide a new balance of work between humans and machines. This paper will describe several NASA projects, and review results and conclusions from ground and flight investigations where vehicle intelligence was developed and applied to aeronautical and space systems. In the first example, flight results from a neural network flight control demonstration will be reviewed. Using, a highly-modified F-15 aircraft, a NASA/Dryden experimental flight test program has demonstrated how the neural network software can correctly identify and respond to changes in aircraft stability and control characteristics. Using its on-line learning capability, the neural net software would identify that something in the vehicle has changed, then reconfigure the flight control computer system to adapt to those changes. The results of the Remote Agent software project will be presented. This capability will reduce the cost of future spacecraft operations as computers become "thinking" partners along with humans. In addition, the paper will describe the objectives and plans for the autonomous airplane program and the autonomous rotorcraft project. Technologies will also be developed.

Rosen, Robert↗

NASA NTRS2004

Recent Enhancements to USM3D Unstructured Flow Solver for Unsteady Flows

The NASA USM3D unstructured flow solver is undergoing extensions to address dynamic flow problems in support of NASA and NAVAIR efforts to study the applicability of Computational Fluid Dynamics tools for the prediction of aircraft stability and control characteristics. The initial extensions reported herein include two second-order time stepping schemes, Detached-Eddy Simulation, and grid motion. This paper reports the initial code verification and validation assessment of the dynamic flow capabilities of USM3D. The cases considered are the classic inviscid shock-tube problem, low Reynolds number wake shedding from a NACA 0012 airfoil, high Reynolds number DES-based wake shedding from a 4-to-1 length-to-diameter cylinder, and forced pitch oscillation of a NACA 0012 airfoil with inviscid and turbulent flow.

Pandya, Mohagna J.↗

NASA NTRS2004

Navier-Stokes Computations of Longitudinal Forces and Moments for a Blended Wing Body

The object of this paper is to investigate the feasibility of applying CFD methods to aerodynamic analyses for aircraft stability and control. The integrated aerodynamic parameters used in stability and control, however, are not necessarily those extensively validated in the state of the art CFD technology. Hence, an exploratory study of such applications and the comparison of the solutions to available experimental data will help to assess the validity of the current computation methods. In addition, this study will also examine issues related to wind tunnel measurements such as measurement uncertainty and support interference effects. Several sets of experimental data from the NASA Langley 14x22-Foot Subsonic Tunnel and the National Transonic Facility are presented. Two Navier-Stokes flow solvers, one using structured meshes and the other unstructured meshes, were used to compute longitudinal static stability derivatives for an advanced Blended Wing Body configuration over a wide range of angles of attack. The computations were performed for two different Reynolds numbers and the resulting forces and moments are compared with the above mentioned wind tunnel data.

Pao, S. Paul↗

NASA NTRS2005

Navier-Stokes Computations of Longitudinal Forces and Moments for a Blended Wing Body

The object of this paper is to investigate the feasibility of applying CFD methods to aerodynamic analyses for aircraft stability and control. The integrated aerodynamic parameters used in stability and control, however, are not necessarily those extensively validated in the state of the art CFD technology. Hence, an exploratory study of such applications and the comparison of the solutions to available experimental data will help to assess the validity of the current computation methods. In addition, this study will also examine issues related to wind tunnel measurements such as measurement uncertainty and support interference effects. Several sets of experimental data from the NASA Langley 14x22-Foot Subsonic Tunnel and the National Transonic Facility are presented. Two Navier-Stokes flow solvers, one using structured meshes and the other unstructured meshes, were used to compute longitudinal static stability derivatives for an advanced Blended Wing Body configuration over a wide range of angles of attack. The computations were performed for two different Reynolds numbers and the resulting forces and moments are compared with the above mentioned wind tunnel data.

Pao, S. Paul↗

NASA NTRS2008

On the Development of Parameterized Linear Analytical Longitudinal Airship Models

In order to explore Titan, a moon of Saturn, airships must be able to traverse the atmosphere autonomously. To achieve this, an accurate model and accurate control of the vehicle must be developed so that it is understood how the airship will react to specific sets of control inputs. This paper explains how longitudinal aircraft stability derivatives can be used with airship parameters to create a linear model of the airship solely by combining geometric and aerodynamic airship data. This method does not require system identification of the vehicle. All of the required data can be derived from computational fluid dynamics and wind tunnel testing. This alternate method of developing dynamic airship models will reduce time and cost. Results are compared to other stable airship dynamic models to validate the methods. Future work will address a lateral airship model using the same methods.

aerobot↗

NASA NTRS2010

Parameterized Linear Longitudinal Airship Model

A parameterized linear mathematical model of the longitudinal dynamics of an airship is undergoing development. This model is intended to be used in designing control systems for future airships that would operate in the atmospheres of Earth and remote planets. Heretofore, the development of linearized models of the longitudinal dynamics of airships has been costly in that it has been necessary to perform extensive flight testing and to use system-identification techniques to construct models that fit the flight-test data. The present model is a generic one that can be relatively easily specialized to approximate the dynamics of specific airships at specific operating points, without need for further system identification, and with significantly less flight testing. The approach taken in the present development is to merge the linearized dynamical equations of an airship with techniques for estimation of aircraft stability derivatives, and to thereby make it possible to construct a linearized dynamical model of the longitudinal dynamics of a specific airship from geometric and aerodynamic data pertaining to that airship. (It is also planned to develop a model of the lateral dynamics by use of the same methods.) All of the aerodynamic data needed to construct the model of a specific airship can be obtained from wind-tunnel testing and computational fluid dynamics

Kulczycki, Eric↗

NASA NTRS2018

Learn to Fly Test Setup and Concept of Operations

The NASA Learn-to-Fly (L2F) project recently completed a series of flight demonstrations of its learning algorithm for flight control at Fort A. P. Hill in Virginia. This paper discusses the test setup and concept of operations (ConOps) used by the L2F team. Unmanned airframe demonstrators for testing the research algorithms included a modified commercial off-the-shelf subscale powered airplane, plus four gliders – two of which had an unconventional configuration and were fabricated using a “rapid” prototyping technique. Avionics system similarities and differences between the test aircraft are described, as well as ground testing in preparation for flight. The ConOps discussion includes the development of a tethered helium balloon drop launch technique for the glider demonstrators. This launch method was chosen for its potential to be inexpensive and allow for rapid turn-around for multiple glider launches – but it also presented challenges, such as balloon tether avoidance, high angle of attack, low dynamic pressure initial conditions, and susceptibility to winds. A remotely piloted approach employing high-end hobbyist radio controlled (R/C) hardware was used for the powered demonstrator. This approach accommodated the interaction between the R/C flight system and the research flight control computer, engaging the L2F algorithm at varying initial conditions and artificially reducing the aircraft stability to stress the algorithm.

Riddick, Stephen E↗

NASA NTRSDate not supplied

TPSAS-NF1676L-15194-DND

Technical Motivation - 1950s: Indication of large lateral (roll/yaw) acceleration (“β-dot”) dynamic derivatives for configurations with strong vortex flows in the stall region (Lichtenstein, Campbell, Riley)! - 1960s: Increased emphasis on use of long-range missiles tempered by aircraft losses in close-in air combat - 1970s: - Effect of lateral acceleration derivatives on aircraft stability (Nguyen) - Characteristics and air combat advantages of rapid controlled large-amplitude maneuvering at low speeds near maximum lift shown in piloted simulations (Herbst) - 1980s: - Dynamic (forced-oscillation, rotary balance, curved- and rolling-flow) wind tunnel tests (Grafton, Lutze, Hultberg) - Incorporation of test data into computer simulations (Kalviste) - Technologies developed for controlled maneuvers at stall, post-stall angles of attack - Concern that conventional math modeling inadequately represented the dynamic component of these motions - Need to evaluate dependency of control laws on accurate computer simulations and motion prediction

Marilyn E Ogburn↗

NASA NTRSDate not supplied

Capturing Complex Multivariate Time Series Interactions to Detect High-Risk Adverse Events During Flight

The reduction of aviation safety metrics below target thresholds continue to drive down the number of aviation fatalities and accidents. To meet future safety demands, sustained efforts by aviation agencies promoting safety assurance processes and systems have prompted ongoing research on identifying and mitigating in-flight risks. With the projected increase in passenger load factor and rollout of more autonomous systems into the national airspace, the need to detect high-risk events in-time or ahead-of-time is becoming increasingly crucial. New anomaly detection and precursor identification algorithms will need to scale to different airframes, levels of autonomy, and system complexity. While the pervasiveness of deep learning has resulted in the development of performant anomaly detection methods, these sophisticated models currently suffer from low end-user interpretability. Building off our previous work on identifying adverse events in multivariate flight data during descent, we propose a data-driven approach for detecting in-flight adverse events caused by the complex interplay of flight variables. Our approach utilizes ordinal patterns of important aircraft stability variables (e.g., airspeed and descent rate) to capture multivariate flight dynamics that can be used to predict the onset of unstable approaches, a high-risk adverse event that can occur during approach. Through the use of ordinal patterns, we aim to create more interpretable detection models of in-flight adverse events that can be translated to future autonomous systems without difficulty. Our analysis shows the presence of distinct ordinal pattern distributions that can be used to predict unstable approaches 1 minute ahead of time with an accuracy of 0.69 and a recall of 0.73 and 30 seconds ahead with an accuracy of 0.70 and a recall of 0.86.

Risk detection↗

NASA NTRSDate not supplied

Capturing Multivariate Time Series Interactions to Detect High‑Risk Instability During Approach

The reduction of aviation safety metrics below target thresholds continue to drive down the number of aviation fatalities and accidents. To meet future safety demands, sustained efforts by aviation agencies promoting safety assurance processes and systems have prompted ongoing research on identifying and mitigating in-flight risks. With the projected increase in passenger load factor and rollout of more autonomous systems into the national airspace, the need to detect high-risk events in-time or ahead-of-time is becoming increasingly crucial. New anomaly detection and precursor identification algorithms will need to scale to different airframes, levels of autonomy, and system complexity. While the pervasiveness of deep learning has resulted in the development of performant anomaly detection methods, these sophisticated models currently suffer from low end-user interpretability. Building off our previous work on identifying adverse events in multivariate flight data during descent, we propose a data-driven approach for detecting in-flight adverse events caused by the complex interplay of flight variables. Our approach utilizes ordinal patterns of important aircraft stability variables (e.g., airspeed and descent rate) to capture multivariate flight dynamics that can be used to predict the onset of unstable approaches, a high-risk adverse event that can occur during approach. Through the use of ordinal patterns, we aim to create more interpretable detection models of in-flight adverse events that can be translated to future autonomous systems without difficulty. Our analysis shows the presence of distinct ordinal pattern distributions that can be used to predict unstable approaches 1 minute ahead of time with an accuracy of 0.69 and a recall of 0.73 and 30 seconds ahead with an accuracy of 0.70 and a recall of 0.86.

Risk detection↗

NASA NTRS1977

Thermal stability of some aircraft turbine fuels derived from oil shale and coal

Thermal stability breakpoint temperatures are shown for 32 jet fuels prepared from oil shale and coal syncrudes by various degrees of hydrogenation. Low severity hydrotreated shale oils, with nitrogen contents of 0.1 to 0.24 weight percent, had breakpoint temperatures in the 477 to 505 K (400 to 450 F) range. Higher severity treatment, lowering nitrogen levels to 0.008 to 0.017 weight percent, resulted in breakpoint temperatures in the 505 to 533 K (450 to 500 F) range. Coal derived fuels showed generally increasing breakpoint temperatures with increasing weight percent hydrogen, fuels below 13 weight percent hydrogen having breakpoints below 533 K (500 F). Comparisons are shown with similar literature data.

Reynolds, T. W.↗

NASA NTRS1986

The measurement of aircraft performance and stability and control after flight through natural icing conditions

The effects of airframe icing on the performance and stability and control of a twin-engine commuter-class aircraft were measured by the NASA Lewis Research Center. This work consisted of clear air tests with artificial ice shapes attached to the horizontal tail, and natural icing flight tests in measured icing clouds. The clear air tests employed static longitudinal flight test methods to determine degradation in stability margins for four simulated ice shapes. The natural icing flight tests employed a data acquisition system, which was provided under contract to NASA by Kohlman Systems Research Incorporated. This system used a performance modeling method and modified maximum likelihood estimation (MMLE) technique to determine aircraft performance degradation and stability and control. Flight test results with artificial ice shapes showed that longitudinal, stick-fixed, static margins are reduced on the order of 5 percent with flaps up. Natural icing tests with the KSR system corroborated these results and showed degradation in the elevator control derivatives on the order of 8 to 16 percent depending on wing flap configuration. Performance analyses showed the individual contributions of major airframe components to the overall degration in lift and drag.

Ranaudo, R. J.↗

NASA NTRS1986

The measurement of aircraft performance and stability and control after flight through natural icing conditions

The effects of airframe icing on the performance and stability and control of a twin-engine commuter-class aircraft were measured by the NASA Lewis Research Center. This work consisted of clear air tests with artificial ice shapes attached to the horizontal tail, and natural icing flight tests in measured icing clouds. The clear air tests employed static longitudinal flight test methods to determine degradation in stability margins for four simulated ice shapes. The natural icing flight tests employed a data acquisition system, which was provided under contract to NASA by Kohlman Systems Research Incorporated. This system used a performance modeling method and modified maximum likelihood estimation (MMLE) technique to determine aircraft performance degradation and stability and control. Flight test results with artificial ice shapes showed that longitudinal, stick-fixed, static margins are reduced on the order of 5 percent with flaps up. Natural icing tests with the KSR system corroborated these results and showed degradation in the elevator control derivatives on the order of 8 to 16 percent depending on wing flap configuration. Performance analyses showed the individual contributions of major airframe components to the overall degradation in lift and drag.

Ranaudo, R. J.↗

NASA NTRS2006

Analyzing Aeroelastic Stability of a Tilt-Rotor Aircraft

Proprotor Aeroelastic Stability Analysis, now at version 4.5 (PASTA 4.5), is a FORTRAN computer program for analyzing the aeroelastic stability of a tiltrotor aircraft in the airplane mode of flight. The program employs a 10-degree- of-freedom (DOF), discrete-coordinate, linear mathematical model of a rotor with three or more blades and its drive system coupled to a 10-DOF modal model of an airframe. The user can select which DOFs are included in the analysis. Quasi-steady strip-theory aerodynamics is employed for the aerodynamic loads on the blades, a quasi-steady representation is employed for the aerodynamic loads acting on the vibrational modes of the airframe, and a stability-derivative approach is used for the aerodynamics associated with the rigid-body DOFs of the airframe. Blade parameters that vary with the blade collective pitch can be obtained by interpolation from a user-defined table. Stability is determined by examining the eigenvalues that are obtained by solving the coupled equations of motions as a matrix eigenvalue problem. Notwithstanding the relative simplicity of its mathematical foundation, PASTA 4.5 and its predecessors have played key roles in a number of engineering investigations over the years.

Kvaternil, Raymond G.↗