Results for “Atmospheric Radiation Measurement (ARM)” — Page 8

DOE OSTI2023

Field Validation of Cloud Properties Sensor (SAIL Field Campaign Report)

The purpose of the Field Validation of Cloud Properties Sensor – SAIL campaign was to deploy Aerodyne’s extended-wavelength TWST cloud optical properties sensor (TWST-CPS) in an operationally relevant environment with co-located, externally validated sensors. Colocation with The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s deployment of its second Mobile Facility (AMF2) on the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign at Crested Butte, Colorado was ideal because of the variety of operational sensors that can measure some of the same cloud properties using different modalities. While cloud property sensors have long existed, they tend to be costly to produce and maintain. Our sensor measures absolute spectral radiance over 440-1700 nm and retrieves cloud optical depth (COD), droplet effective radius (Reff), and thermodynamic phase (Phase). Our prototype is built predominantly from off-the-shelf components and uses uncooled spectrometers. A low-cost, easy-to-use sensor such as this could allow deployment at many more sites for greater spatial coverage. Instrument deployment to test robust operations and a new stray-light baffle design, and the continued development of analysis and retrieval algorithms using the data from this deployment, are central technical objectives of Aerodyne Research’s U.S. Department of Energy Small Business Innovative Research Phase 2 contract (DE-SC0020473, Low-cost shortwave spectroradiometer for retrieval of cloud properties).

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Field Validation of Cloud Properties Sensor – SAIL Field Campaign Report

The purpose of the Field Validation of Cloud Properties Sensor – SAIL campaign was to deploy Aerodyne’s extended-wavelength TWST cloud optical properties sensor (TWST-CPS) in an operationally relevant environment with co-located, externally validated sensors. Colocation with The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s deployment of its second Mobile Facility (AMF2) on the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign at Crested Butte, Colorado was ideal because of the variety of operational sensors that can measure some of the same cloud properties using different modalities. While cloud property sensors have long existed, they tend to be costly to produce and maintain. Our sensor measures absolute spectral radiance over 440-1700 nm and retrieves cloud optical depth (COD), droplet effective radius (Reff), and thermodynamic phase (Phase). Our prototype is built predominantly from off-the-shelf components and uses uncooled spectrometers. A low-cost, easy-to-use sensor such as this could allow deployment at many more sites for greater spatial coverage. Instrument deployment to test robust operations and a new stray-light baffle design, and the continued development of analysis and retrieval algorithms using the data from this deployment, are central technical objectives of Aerodyne Research’s U.S. Department of Energy Small Business Innovative Research Phase 2 contract (DE-SC0020473, Low-cost shortwave spectroradiometer for retrieval of cloud properties).

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

ARM Cloud and Precipitation Measurements and Science Group (CPMSG) 2024 Workshop Report

The mission of the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility is to improve the understanding and representation of cloud and aerosol processes and their interaction with the Earth's surface in Earth system models (ESMs) by providing comprehensive field observations and supporting advanced data analytics. The ARM Cloud and Precipitation Measurements and Science Group (CPMSG) was chartered in March 2019 to help improve the performance and scientific impact of ARM measurements of clouds and precipitation. The group aims to identify and address gaps in measurement capabilities, maximize the scientific impact of ARM data, and effectively serve the scientific community. To achieve these goals, the group includes experts in cloud and precipitation science, as well as representatives from ARM infrastructure, including instrument mentors, engineers, data quality officers, and data product translators. Prior to CPMSG, early discussions on cloud and precipitation measurements primarily focused on improving radar systems, but have since evolved to include a broader scope involving radiometers and other instruments. Since its formation, the CPMSG has gathered feedback using science traceability matrices. CPMSG aims to keep these as living documents to show the measurement needs, scientific drivers, roadblocks, maturity of measurements and retrievals, and pathways to model improvements. The group meets quarterly to discuss and prioritize measurement and operational improvements.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

ARM Cloud and Precipitation Measurements and Science Group (CPMSG) 2024 Workshop Report

The mission of the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility is to improve the understanding and representation of cloud and aerosol processes and their interaction with the Earth's surface in Earth system models (ESMs) by providing comprehensive field observations and supporting advanced data analytics. The ARM Cloud and Precipitation Measurements and Science Group (CPMSG) was chartered in March 2019 to help improve the performance and scientific impact of ARM measurements of clouds and precipitation. The group aims to identify and address gaps in measurement capabilities, maximize the scientific impact of ARM data, and effectively serve the scientific community. To achieve these goals, the group includes experts in cloud and precipitation science, as well as representatives from ARM infrastructure, including instrument mentors, engineers, data quality officers, and data product translators. Prior to CPMSG, early discussions on cloud and precipitation measurements primarily focused on improving radar systems, but have since evolved to include a broader scope involving radiometers and other instruments. Since its formation, the CPMSG has gathered feedback using science traceability matrices. CPMSG aims to keep these as living documents to show the measurement needs, scientific drivers, roadblocks, maturity of measurements and retrievals, and pathways to model improvements. The group meets quarterly to discuss and prioritize measurement and operational improvements.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

North Slope of Alaska XSAPR b1 Data Processing Report: April 2024-April 2025

The North Slope of Alaska (NSA) atmospheric observatory, operated by the U.S. Department of Energy (DOE)’s Atmospheric Radiation Measurement (ARM) User Facility, is a measurement site in the Arctic that has been collecting crucial atmospheric data for more than 25 years. The central facility located in Utqiaġvik, Alaska (formerly known as Barrow) hosts a suite of instruments that are used to better understand arctic processes, which are often not well represented in earth system models. The NSA site sits only a few kilometers from the Arctic Ocean, which also makes it a prime location to study complex ocean-atmosphere-ice interactions. Arctic cloud and precipitation processes are also of scientific interest, and remote-sensing instruments including radars are a key component of the NSA instrument suite. One of the radars at NSA is the X-band Scanning ARM Precipitation Radar (XSAPR). This report evaluates one year of recent XSAPR data from April 2024 through April 2025 and details the process of generating b1-level data. This analysis marks the first effort by ARM staff to quality-control NSA XSAPR data with the goal of routinely producing b1-level data in the future depending on radar operations.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

ARM Cloud and Precipitation Measurements and Science Group (CPMSG) 2024 Workshop Report

The mission of the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility is to improve the understanding and representation of cloud and aerosol processes and their interaction with the Earth's surface in Earth system models (ESMs) by providing comprehensive field observations and supporting advanced data analytics. The ARM Cloud and Precipitation Measurements and Science Group (CPMSG) was chartered in March 2019 to help improve the performance and scientific impact of ARM measurements of clouds and precipitation. The group aims to identify and address gaps in measurement capabilities, maximize the scientific impact of ARM data, and effectively serve the scientific community. To achieve these goals, the group includes experts in cloud and precipitation science, as well as representatives from ARM infrastructure, including instrument mentors, engineers, data quality officers, and data product translators. Prior to CPMSG, early discussions on cloud and precipitation measurements primarily focused on improving radar systems, but have since evolved to include a broader scope involving radiometers and other instruments. Since its formation, the CPMSG has gathered feedback using science traceability matrices. CPMSG aims to keep these as living documents to show the measurement needs, scientific drivers, roadblocks, maturity of measurements and retrievals, and pathways to model improvements. The group meets quarterly to discuss and prioritize measurement and operational improvements.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

The Surface Atmosphere Integrated Field Laboratory (SAIL) Campaign

The science of mountainous hydrology spans the atmosphere through the bedrock and inherently crosses physical and disciplinary boundaries: land-atmosphere interactions in complex terrain enhance clouds and precipitation, while watersheds retain and release water over a large range of spatial and temporal scales. Limited observations in complex terrain challenge efforts to improve predictive models of the hydrology in the face of rapid changes. The Upper Colorado River exemplifies these challenges, especially with ongoing mismatches between precipitation, snowpack, and discharge. Consequently, the U.S. Department of Energy’s (DOE) Atmospheric Radiation Measurement (ARM) user facility has deployed an observatory to the East River Watershed near Crested Butte, Colorado between September 2021 and June 2023 to measure the main atmospheric drivers of water resources, including precipitation, clouds, winds, aerosols, radiation, temperature and humidity. This effort, called the Surface Atmosphere Integrated Field Laboratory (SAIL), is also working in tandem with DOE-sponsored surface and subsurface hydrologists and other federal, state, and local partners. SAIL data can be benchmarks for model development by producing a wide range of observational information on precipitation and its associated processes, including those processes that impact snowpack sublimation and redistribution, aerosol direct radiative effects in the atmosphere and in the snowpack, aerosol impacts on clouds and precipitation, and processes controlling surface fluxes of energy and mass. Preliminary data from SAIL’s first year showcase the rich information content in SAIL’s many data-streams and support testing hypotheses that will ultimately improve scientific understanding and predictability of Upper Colorado River hydrology in 2023 and beyond.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Cloud Droplet Measurement System for the ARM Tethered Balloon System (TBS) Field Campaign Report

The Mesa Photonics' cloud droplet measurement system (CDMS) performs in situ measurement of droplet size distribution and droplet number density in clouds. These characteristics are important cloud microphysical properties that are critical input parameters for atmospheric models and are also useful for proper calibration and validation of performance of other atmospheric measurement instrumentation. This small campaign was the first project (out of two) that involved integration of the CDMS into the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility’s tethered balloon system (TBS) and its initial testing at the ARM Southern Great Plains (SGP) atmospheric observatory. The follow-up campaign (AFC07016) involved testing of the CDMS under relevant conditions at the third ARM Mobile Facility (AMF3) at Oliktok Point, Alaska and making in situ measurements in clouds. The goal of this small field campaign was to deploy the CDMS on the ARM TBS, demonstrate its integrity and compatibility with the TBS, and test the wireless telecommunication system in preparation for subsequent in-cloud measurements at ARM’s North Slope of Alaska (NSA) observatory at Utqiagvik (formerly Barrow). The specific technical objectives included: (1) Integration of the Mesa Photonics' CDMS into the ARM TBS, (2) testing of the wireless telecommunication system of the CDMS, (3) evaluating the data acquisition software and image processing algorithms especially under high-background-illumination conditions, and (4) testing the ruggedness of the instrument's optical alignment and other performance characteristics. All objectives have been successfully met. The mounting hardware was designed and built mostly at Sandia National Laboratories (SNL), which allowed reliable mounting of the CDMS on the TBS and co-locating the CDMS with other instruments. The field tests were performed by the principal investigator (PI) in collaboration with the TBS operational crew led by D. Dexheimer. The field testing demonstrated good compatibility of the CDMS with the TBS. During the TBS flights, the crew did not experience any operational issues with the CDMS. The instrument demonstrated reliable operational characteristics, including sufficient battery life and good thermal management. The wireless telecommunication system has been successfully tested at TBS flight altitudes of up to 1000 m. During all flights, the CDMS raw data were wirelessly transmitted to the ground station and processed in real time. The ruggedness of the instrument's optical alignment was evaluated by performing calibration of the CDMS (using Mesa Photonics' fixed-size monodisperse droplet generator) before and after the campaign. The calibration was stable within the instrument's measurement precision. In summary, the campaign demonstrated good compatibility of the Mesa Photonics' CDMS with the ARM TBS. The flight tests confirmed the mechanical integrity of the CDMS and stability of its optical layout, as well as reliability of the wireless telecommunication system. Successful completion of this campaign provided a solid basis for the next campaign (AFC07016, November 2020), that involved testing of the CDMS during in-cloud TBS flights at AMF3 at Oliktok Point.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Science Plan for the Deployment of the Third ARM Mobile Facility to the Southeastern United States at the Bankhead National Forest, Alabama (AMF3 BNF)

In 2018, the U.S. Department of Energy (DOE) held a workshop for the Atmospheric Radiation Measurement (ARM) (Mather and Voyles 2013) user facility to discuss critical climate challenges and locations where key ARM Mobile Facility (AMF) observational assets could impact Earth system modeling (ESM). As an outcome, the southeast United States (SE U.S.) was identified as a high-priority region to target climate-process studies that promote a deeper understanding of the climate system and bolster ARM interactions with the community to drive ESM advancement. The DOE ARM user facility is a globally recognized leader in deploying and operating strategically located observation sites around the world for studying the properties of aerosols and clouds and their interaction with radiation, precipitation, and the Earth’s surface. In partnering with the DOE Atmospheric System Research (ASR) program, ARM solicited a multi-agency Site Science Team approach to provide input and close interaction with ARM management towards a successful SE U.S. deployment of the ARM third Mobile Facility (AMF3) (Miller et al. 2016). These efforts included identifying key locations, science drivers and instruments, and measurement strategies to address the wider climate-process needs and ESM improvement. Community input served a vital role in establishing, refining, and informing the relevant drivers and decisions regarding this AMF3 deployment. The team has identified Northern Alabama (N. AL) as regionally representative to unlock the key opportunities that will improve our understanding and model representation of aerosol, cloud, and land surface processes and their couplings in the SE U.S. A defining aspect of the AMF3 deployment is its commitment to long-term (anticipated five-year) observations to mitigate potential seasonal-to-annual variability that often limits appropriate attribution of phenomena to local or larger-scale processes. The proposed location may leverage nearby surface networks and multi-agency and partner assets to enrich this multi-year deployment. One motivation is to understand the role of spatiotemporal variability (thermodynamic, land-surface) across aspects of the climate system, with our AMF3 team anticipating future demands on characterizing the relationships between local-to-regional cloud development and surface processes across a diverse patchwork of natural, managed, and urban landscapes as found throughout the N. AL regions. The main site targets an intact, representative, forested region – the Bankhead National Forest (BNF) – underscoring further team commitment to regionally important land atmosphere two-way interactive studies “from the canopy to the clouds”, with enhanced tower instrumentation augmenting traditional ARM capabilities adjacent to this site. Multiple supplemental sites will also be distributed across this region, prioritizing added needs for biodiversity. Anticipated high-priority cloud science themes will target N. AL as a regional SE U.S. hotbed for high-impact weather, convective cloud onset, and shallow to-deep cloud transitioning. Anticipated aerosol drivers will focus on chemical processes that control the evolution of organic aerosol, the seasonality and spatial distribution of water vapor and particle-phase water, and its role on aerosol optical properties. Anticipated land atmosphere drivers consider the two-way feedbacks between surface influence on aerosols, clouds, and precipitation properties and the associated radiative impacts on plant physiology and canopy-scale fluxes. Emphasis will include the study of the impact of surface processes on aerosols via precursor emission, and on clouds via moisture flux and thermal development.

Doppler lidar, aerosols, convection↗

DOE OSTI2023

Science Plan for the Deployment of the Third ARM Mobile Facility to the Southeastern United States at the Bankhead National Forest, Alabama (AMF3 BNF)

In 2018, the U.S. Department of Energy (DOE) held a workshop for the Atmospheric Radiation Measurement (ARM) (Mather and Voyles 2013) user facility to discuss critical climate challenges and locations where key ARM Mobile Facility (AMF) observational assets could impact Earth system modeling (ESM). As an outcome, the southeast United States (SE U.S.) was identified as a high-priority region to target climate-process studies that promote a deeper understanding of the climate system and bolster ARM interactions with the community to drive ESM advancement. The DOE ARM user facility is a globally recognized leader in deploying and operating strategically located observation sites around the world for studying the properties of aerosols and clouds and their interaction with radiation, precipitation, and the Earth’s surface. In partnering with the DOE Atmospheric System Research (ASR) program, ARM solicited a multi-agency Site Science Team approach to provide input and close interaction with ARM management towards a successful SE U.S. deployment of the ARM third Mobile Facility (AMF3) (Miller et al. 2016). These efforts included identifying key locations, science drivers and instruments, and measurement strategies to address the wider climate-process needs and ESM improvement. Community input served a vital role in establishing, refining, and informing the relevant drivers and decisions regarding this AMF3 deployment. The team has identified Northern Alabama (N. AL) as regionally representative to unlock the key opportunities that will improve our understanding and model representation of aerosol, cloud, and land-surface processes and their couplings in the SE U.S. A defining aspect of the AMF3 deployment is its commitment to long-term (anticipated five-year) observations to mitigate potential seasonal-to-annual variability that often limits appropriate attribution of phenomena to local or larger-scale processes. The proposed location may leverage nearby surface networks and multi-agency and partner assets to enrich this multi-year deployment. One motivation is to understand the role of spatiotemporal variability (thermodynamic, land-surface) across aspects of the climate system, with our AMF3 team anticipating future demands on characterizing the relationships between local-to-regional cloud development and surface processes across a diverse patchwork of natural, managed, and urban landscapes as found throughout the N. AL regions. The main site targets an intact, representative, forested region – the Bankhead National Forest (BNF) – underscoring further team commitment to regionally important land-atmosphere two-way interactive studies “from the canopy to the clouds”, with enhanced tower instrumentation augmenting traditional ARM capabilities adjacent to this site. Multiple supplemental sites will also be distributed across this region, prioritizing added needs for biodiversity. Anticipated high-priority cloud science themes will target N. AL as a regional SE U.S. hotbed for high-impact weather, convective cloud onset, and shallow-to-deep cloud transitioning. Anticipated aerosol drivers will focus on chemical processes that control the evolution of organic aerosol, the seasonality and spatial distribution of water vapor and particle-phase water, and its role on aerosol optical properties. Anticipated land-atmosphere drivers consider the two-way feedbacks between surface influence on aerosols, clouds, and precipitation properties and the associated radiative impacts on plant physiology and canopy-scale fluxes. Emphasis will include the study of the impact of surface processes on aerosols via precursor emission, and on clouds via moisture flux and thermal development.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Surface heat flux and its association with the MJO in the tropical western Pacific using ARM observations

The Madden-Julian oscillation (MJO) is a major atmospheric phenomenon in the tropics that moves eastward every 20 to 100 days. It brings heavy rain and strong winds, influencing extreme weather events far beyond the tropics – including flooding, hurricanes, tornadoes and heavy snow in the United States. Therefore, an improved understanding of the MJO is critical for enhancing weather forecasts and supporting better decision-making for communities, emergency managers, and the private sector. Past studies, based on short-term observations or long-term model data, have emphasized the dominant role of atmospheric humidity in driving the MJO. Our research, using long-term observations (2000-2014) from three U.S. Department of Energy’s Atmospheric Radiation Measurement (ARM) sites in the tropical western Pacific (Manus, Nauru, and Darwin) confirms those past findings. However, we also show that atmospheric temperature, especially in the mid and upper troposphere, also plays a key role in the MJO’s evolution from its quiet (suppressed) to convective (active) phase. These findings provide valuable insights into how the MJO evolves and may help evaluate and improve weather and climate models. Our study also examined how the exchange of heat between the Earth's surface and the atmosphere, called surface heat flux, interacts with the MJO. This flux includes components such as latent heat (related to evaporation), sensible heat (related to temperature difference between surface and atmosphere), and radiation. We found that modulation in MJO convection is well connected to surface heat flux over the tropical western Pacific. One surface heat flux component often overlooked is the sensible heat flux due to precipitation (Q P ). Since falling raindrops are typically cooler than the land or ocean surface, they can cool the surface and affect local weather. To test the impact of Q P on convection during MJO, we incorporated it into a weather model, and ran simulations for two periods: April 2009 (when the MJO was active) and June 2006 (when it was not). Including Q P reduced errors in simulating the daily peak of rainfall—by 83% during the strong MJO and 23% during the inactive phase. It also improved the timing of peak daily rainfall and reduced the overall precipitation error by about 10%. These improvements were especially noticeable during periods of heavy rainfall. Our results suggest that even small heat exchanges from rainfall can play a significant role in shaping local weather. Accounting for these effects, particularly in regions like the tropical islands, can lead to more accurate simulations of the MJO-associated precipitation.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Aerosol Direct Radiative Effects at the ARM SGP and TWP Sites: Clear Skies

The clear-sky aerosol direct radiative effect (DRE) was estimated at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) and Tropical Western Pacific (TWP) sites. The NASA Langley Fu-Liou radiation model was used with observed inputs including aerosol vertical extinction profile from the Raman lidar; spectral aerosol optical depth (AOD), single-scattering albedo and asymmetry factor from Aerosol Robotic Network; temperature and water vapor profiles from radiosondes; and surface shortwave (SW) spectral albedo from radiometers. A radiative closure experiment was conducted for clear-sky conditions. The mean differences of modeled and observed surface downwelling SW total fluxes were 1 W m-2 at SGP and 2 W m -2 at TWP, which are within observational uncertainty. At SGP, the estimated annual mean clear-sky aerosol DRE is -3.00 W m -2 at the top of atmosphere (TOA) and -6.85 W m -2 at the surface. The strongest aerosol DRE of -4.81 (-10.77) W m -2 at the TOA (surface) are in the summer when AODs are largest. The weakest aerosol DRE of -.28 (-2.77) W m -2 at the TOA (surface) are in November–January when AODs and single-scattering albedos are lowest. At TWP, the annual mean clear-sky DRE is -2.82 W m-2 at the TOA and -10.34 W m -2 at the surface. The strongest aerosol DRE of -5.95 (-22.20) W m -2 at the TOA (surface) are in November (October) due to the biomass burning season’s peak. The weakest aerosol DRE of -0.96 (-4.16) W m -2 at the TOA (surface) are in March (April) when AODs are smallest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

The U.S. DOE ARM User Facility Establishes a New Site for Studies of Land–Aerosol–Cloud Interactions in the Southeastern United States

The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility has established a new site in the Bankhead National Forest (BNF) in northern Alabama that will gather data on how clouds, the land surface, and aerosols interact at a hierarchy of scales important to understanding and simulating the Earth system. Starting its operations in October 2024, the BNF site provides a multi-year opportunity for scientists to unravel complex land-atmosphere interactions. A suite of ground-based sensors, elevated tower-based instrumentation, and aerial facilities will enable scientists to investigate those interactions from within the canopy to the clouds. The Southeastern United States was recommended by the DOE ARM and its collaborators in the broader community as an important region to address their common scientific questions given the region’s abundant surface-forced convective clouds and mesoscale convective systems that pose ongoing challenges in Earth system models. The region is also home to significant terrain complexity and land-use heterogeneity that will unleash new understanding of anthropogenic and biogenic aerosol processes, boundary-layer aerosol-cloud interactions, and the interactions between the terrestrial ecosystem and coupled aerosol-cloud-radiation processes.

Aerosols↗

DOE OSTI2024

Case study of a bore wind-ramp event from lidar measurements and HRRR simulations over ARM Southern Great Plains

The rapid change of wind speed and direction on 21 August 2017 is studied using Doppler lidar measurements at five sites of the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) facility in north-central Oklahoma. The Doppler lidar data were investigated along with meteorological variables such as temperature, humidity, and turbulence available from the large suite of instrumentation deployed at the SGP Central Facility (C1) during the Land-Atmosphere Feedback Experiment in August 2017. Lidar measurements at five sites, separated by 55-70 km, allowed us to document the development and evolution of the wind flow over the SGP area, examine synoptic conditions to understand the mechanism that leads to the ramp event, and estimate the ability of the High-Resolution Rapid Refresh model to reproduce this event. The flow feature in question is an atmospheric bore, a small-scale phenomenon that is challenging to represent in models, that was generated by a thunderstorm outflow northwest of the ARM SGP area. The small-scale nature of bores, its impact on power generation, and the modeling challenges associated with representing bores are discussed in this paper. In conclusion, the results also provide information about model errors between sites of different surface and vegetation types.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

North Slope Alaska and Tethered Balloon Systems: ARM Facilities Monthly Status Update

In support of the DOE Office of Science, Sandia National Labs is one of nine national laboratories which oversees the Atmospheric Radiation Measurement (ARM) Program. The Sandia ARM team has an obligation to fulfill its mission to provide the nation with data to improve the understanding of climate processes and the representation of those processes in climate models. Sandia’s ARM team’s ability to provide detailed and accurate descriptions of the Earth’s atmosphere in diverse climate regimes assists the DOE in development of sustainable solutions to the nation’s energy and environmental challenges. Sandia Labs manages ARM atmospheric facilities along the North Slope of Alaska (NSA) at Utqiagvik as well as the Tethered Balloon System (TBS). Activities conducted at NSA and with the TBS aide in data collection for the ARM data archive. An overview of these activities for the month of December follows.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2000

Autonomous, Full-Time Cloud Profiling at Arm Sites with Micro Pulse Lidar

Since the early 1990's technology advances permit ground based lidar to operate full time and profile all significant aerosol and cloud structure of the atmosphere up to the limit of signal attenuation. These systems are known as Micro Pulse Lidars (MPL), as referenced by Spinhirne (1993), and were first in operation at DOE Atmospheric Radiation Measurement (ARM) sites. The objective of the ARM program is to improve the predictability of climate change, particularly as it relates to cloud-climate feedback. The fundamental application of the MPL systems is towards the detection of all significant hydrometeor layers, to the limit of signal attenuation. The heating and cooling of the atmosphere are effected by the distribution and characteristics of clouds and aerosol concentration. Aerosol and cloud retrievals in several important areas can only be adequately obtained with active remote sensing by lidar. For cloud cover, the height and related emissivity of thin clouds and the distribution of base height for all clouds are basic parameters for the surface radiation budget, and lidar is essetial for accurate measurements. The ARM MPL observing network represents the first long-term, global lidar study known within the community. MPL systems are now operational at four ARM sites. A six year data set has been obtained at the original Oklahoma site, and there are several years of observations at tropical and artic sites. Observational results include cloud base height distributions and aerosol profiles. These expanding data sets offer a significant new resource for cloud, aerosol and atmospheric radiation analysis. The nature of the data sets, data processing algorithms, derived parameters and application results are presented.

Spinhirne, James D.↗

NASA NTRS2001

Effect of Clouds on the Atmospheric Solar Heating in the Tropical Western Pacific

The sea surface solar radiative fluxes have been retrieved from the radiances measured by Japan's Geostationary Meteorological Satellite 5. The surface radiation data set covers the domain 40S-40N and 90E-170W and a period starting from January 1998. The retrieved surface radiation has been validated with the radiometric measurements at the Atmospheric Radiation Measurement (ARM) site on Manus Island in the equatorial western Pacific. Together with the Clouds and the Earth's Radiant Energy System (CERES) solar fluxes at the top of the atmosphere and the radiative transfer calculations of clear-sky fluxes, this surface radiation data set was used to study the impact of clouds on the solar heating of the atmosphere. It was found that clouds enhanced the atmospheric solar heating by approx. 21 watts per meter squared in the tropical western Pacific and the South China Sea, and the ratio of the cloud radiative forcing at the surface to that at the TOA was approximately 1.6.

Chou, Ming-Dah↗

DOE OSTI2021

Evaluation of a land-atmosphere coupling metric computed from a ground-based infrared interferometer

Land-atmosphere feedbacks are a critical component of the hydrologic cycle. Vertical profiles of boundary layer temperature and moisture, together with information about the land surface, are used to compute land-atmosphere coupling metrics. Ground based remote sensing platforms, such as the Atmospheric Emitted Radiance Interferometer (AERI), can provide high temporal resolution vertical profiles of temperature and moisture. When co-located with soil moisture, surface flux, and surface meteorological observations, such as at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site, it is possible to observe both the terrestrial and atmospheric legs of land-atmosphere feedbacks. In this study, we compare a commonly used coupling metric computed from radiosonde-based data to that obtained from the AERI to characterize the accuracy and uncertainty in the metric derived from the two distinct platforms. This approach demonstrates the AERI’s utility where radiosonde observations are absent in time and/or space. Radiosonde and AERI based observations of the Convective Triggering Potential and Low-Level Humidity Index (CTP-HI low ) were computed during the 1200 UTC observation time and displayed good agreement during both 2017 and 2019 warm seasons. Furthermore, radiosonde and AERI derived metrics diagnosed the same atmospheric preconditioning based upon the CTP-HI low framework a majority of the time. When retrieval uncertainty was considered, even greater agreement was found between radiosonde and AERI derived classification. The AERI’s ability to represent this coupling metric well enabled novel exploration of temporal variability within the overnight period in CTP and HI low . Observations of CTP-HI low computed within a few hours of 1200 UTC were essentially equivalent, however with greater differences in time arose greater differences in CTP and HI low .

54 ENVIRONMENTAL SCIENCES↗