Search NASA⌕ Search

SEARCH · Search NASA

Results for “Atomic spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Investigation of Undissolved Solids from Salt Waste Processing Facility (SWPF) Salt Batches Collected via Filtration

SRNL researchers performed six experiments wherein 0.1 μm-grade stainless steel filters were used to filter samples pulled from salt batches 6, 9B, and 11B, without the addition of monosodium titanate. Three of these experiments were performed to collect filterable solids from each salt batch and characterize trapped solids via scanning electron microscopy. The remaining three experiments were performed to collect and then dissolve the same solids using 3.5 M nitric acid (similar to that employed in the Salt Waste Processing Facility) for characterization via Inductively-coupled plasma atomic emission spectroscopy.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Characterization of Tank 9H Annulus Sample in Support of Residual Material Inventory Determinations

The Savannah River National Laboratory (SRNL) was requested by Savannah River Mission Completion (SRMC) to provide sample preparation and characterization of the Tank 9H annulus sample in support of Residual Material Inventory Determinations. One Tank 9H sample in three vials [HTF-9-25-13, HTF-9-25-14 and HTF-9-25-15], with each vial containing approximately 200 mL of the Tank 9H annulus salt solution, were delivered to the SRNL Shielded Cells for sample preparation and characterizations in February 2025. The density of the “as-received” solution contained in each of the three Tank 9H annulus sample vials were determined followed by a solid-liquid separation on each one using 0.45-micron Nalgene® nylon filter membranes. The resulting filtrates were combined to form the Tank 9H annulus sample with a total volume of about 600 mL. The combined wet solid fractions, about a total of 4.8 grams of salt material, remaining on the filter membranes were air-dried in the Shielded Cells for 72 hours. The total weight of the air-dried solids was 2.1 grams. These air-dried solids were washed with deionized water (DI water) at a phase ratio of 60 mL DI water/gram of solids to recover insoluble solids, if any. No visible or measurable quantity of insoluble solids were recovered after DI water washing of the air-dried solids because the air-dried solids completely dissolved in the DI water. The solid fraction-wash water was not combined with the 600 mL of the filtrate solution, and the resulting solution was not screened or analyzed for radionuclides. Aliquot sample volumes of the undiluted Tank 9H annulus sample were sent to the SRNL analytical services groups for radionuclides, elementals, anions and total mercury analysis by various methods including radiochemical separations/counting methods, inductively coupled plasma-atomic emission spectroscopy (ICP-AES), and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) and special preparations. All sample analyses were performed in triplicate. This report presents the analytical characterization results for the Tank 9H annulus sample. The results are also reported where analytical methods yielded additional analytes, other than those requested by SRMC. In the characterization of the Tank 9H annulus sample, the detection limits for all the analytes, as specified in the Technical Task Request (TTR) and Task Technical and Quality Assurance Plan (TTQAP), were met.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Effect of Endosymbiotic Bacteria on Fungal Resistance Toward Heavy Metals

Most studies on metal removal or tolerance by fungi or bacteria focus on single isolates, without taking into consideration that some fungi in nature may be colonized by endobacteria. To address this knowledge gap, we investigated the tolerance and removal of diverse metals with two fungal species: Linnemannia elongata containing Burkholderia-related endobacteria and Benniella erionia containing Mollicute-related endobacteria. Isogenic lines of both species were generated with antibiotic treatments to remove their respective endobacteria. Experiments involved comparing the isogenic lines and wild type fungi in relation to the minimum inhibitory concentration for the metals, the fungal ability to remove these different metals via atomic adsorption spectroscopy, and the interaction of the metals with specific functional groups of the fungi and fungi-bacteria to determine the role of the bacteria via attenuated total reflection fourier transformed infrared (ATR-FTIR). Finally, we determined the influence of different metal concentrations, associated with moderate and high fungal growth inhibition, on the presence of the endobacteria inside the fungal mycelium via quantitative real-time PCR. Results showed that the presence of the endosymbiont increased B. erionia resistance to Mn 2+ and increased the removal of Fe 2+ compared to isogenic lines. The absence of the endosymbiont in L. elongata increased the fungal resistance toward Fe 2+ and improved the removal of Fe 2+ . Furthermore, when the bacterial endosymbiont was present in L. elongata , a decrease in the fungal resistance to Ca 2+ , Fe 2+ , and Cr 6+ was noticeable. In the ATR-FTIR analysis, we determined that C-H and C = O were the major functional groups affected by the presence of Cu 2+ , Mn 2+ , and Fe 2+ for L. elongata and in the presence of Cu 2+ and Ca 2+ for B. eronia . It is noteworthy that the highest concentration of Pb 2+ led to the loss of endobacteria in both L. elongata and B. eronia , while the other metals generally increased the concentration of endosymbionts inside the fungal mycelium. From these results, we concluded that bacterial endosymbionts of fungi can play a fundamental role in fungal resistance to metals. This study provides the first step toward a greater understanding of symbiotic interactions between bacteria and fungi in relation to metal tolerance and remediation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Microstructure, electrical resistivity, and tensile properties of neutron-irradiated Cu–Cr–Nb–Zr

High strength, high conductivity copper alloys that can resist creep at high temperatures are one of the primary candidates for efficient heat exchangers in fusion reactors. Cu–Cr–Nb–Zr (CCNZ) alloys, which were designed to improve the strength and creep life of ITER Cu–Cr–Zr (CCZ) reference alloys, have been found to have comparable electrical conductivity and tensile properties to CCZ alloys. The measured creep rupture times for these improved alloys is about ten times higher than the ITER reference alloys at 90–125 MPa at 500 °C. However, the effects of neutron irradiation on these alloys, and the ensuing material properties, have not been studied; thus, their utility in a fusion reactor environment is not well understood. This study characterizes the room temperature mechanical and electrical properties of a neutron-irradiated CCNZ alloy and compares them to a neutron-irradiated ITER reference heat sink CCZ alloy. Tensile specimens were neutron irradiated in the High Flux Isotope Reactor (HFIR) to 5 dpa between 250 °C and 325 °C. Post-irradiation characterization included electrical resistivity measurements, hardness, and tensile tests. Microstructural evaluation used scanning electron microscopy, energy dispersive x-ray spectroscopy, and atom probe tomography to characterize the irradiation-produced changes in the microstructure and investigate the mechanistic processes leading to post-irradiation properties. Transmutation calculations were validated with composition measurements from atom probe data and used to calculate contributions to the increased electrical resistivity measured after irradiation. Comparisons with CCZ alloys in the same irradiation heat found that the post-irradiated CCNZ and CCZ alloys had comparable electrical resistivity. Although CCNZ alloys suffered more irradiation hardening than CCZ, the overall tensile behavior deviated very little from non-irradiated values in the temperature range studied.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ion Binding Properties of a Naturally Occurring Metalloantibody

LT1009 is a humanized version of murine LT1002 IgG1 that employs two bridging Ca2+ ions to bind its antigen, the biologically active lipid sphingosine-1-phosphate (S1P). We crystallized and determined the X-ray crystal structure of the LT1009 Fab fragment in 10 mM CaCl2 and found that it binds two Ca2+ in a manner similar to its antigen-bound state. Flame atomic absorption spectroscopy (FAAS) confirmed that murine LT1002 also binds Ca2+ in solution and inductively-coupled plasma-mass spectrometry (ICP-MS) revealed that, although Ca2+ is preferred, LT1002 can bind Mg2+ and, to much lesser extent, Ba2+. Isothermal titration calorimetry (ITC) indicated that LT1002 binds two Ca2+ ions endothermically with a measured dissociation constant (KD) of 171 μM. Protein and genome sequence analyses suggested that LT1002 is representative of a small class of confirmed and potential metalloantibodies and that Ca2+ binding is likely encoded for in germline variable chain genes. To test this hypothesis, we engineered, expressed, and purified a Fab fragment consisting of naïve murine germline-encoded light and heavy chain genes from which LT1002 is derived and observed that it binds Ca2+ in solution. We propose that LT1002 is representative of a class of naturally occurring metalloantibodies that are evolutionarily conserved across diverse mammalian genomes.

Farokhi, Elinaz↗
DOE OSTI2021

Machine Learning Predictions of Transition Probabilities in Atomic Spectra

Forward modeling of optical spectra with absolute radiometric intensities requires knowledge of the individual transition probabilities for every transition in the spectrum. In many cases, these transition probabilities, or Einstein A-coefficients, quickly become practically impossible to obtain through either theoretical or experimental methods. Complicated electronic orbitals with higher order effects will reduce the accuracy of theoretical models. Experimental measurements can be prohibitively expensive and are rarely comprehensive due to physical constraints and sheer volume of required measurements. Due to these limitations, spectral predictions for many element transitions are not attainable. In this work, we investigate the efficacy of using machine learning models, specifically fully connected neural networks (FCNN), to predict Einstein A-coefficients using data from the NIST Atomic Spectra Database. For simple elements where closed form quantum calculations are possible, the data-driven modeling workflow performs well but can still have lower precision than theoretical calculations. For more complicated nuclei, deep learning emerged more comparable to theoretical predictions, such as Hartree–Fock. Unlike experiment or theory, the deep learning approach scales favorably with the number of transitions in a spectrum, especially if the transition probabilities are distributed across a wide range of values. It is also capable of being trained on both theoretical and experimental values simultaneously. In addition, the model performance improves when training on multiple elements prior to testing. The scalability of the machine learning approach makes it a potentially promising technique for estimating transition probabilities in previously inaccessible regions of the spectral and thermal domains on a significantly reduced timeline.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Laboratory Calibrations of Fe xii–xiv Line-Intensity Ratios for Electron Density Diagnostics

In this work, we have used an electron beam ion trap to measure electron-density-diagnostic line-intensity ratios for extreme ultraviolet lines from Fe xii, xiii, and xiv at wavelengths of ≈185–205 and 255–276 Å. These ratios can be used as density diagnostics for astrophysical spectra and are especially relevant to solar physics. We found that density diagnostics using the Fe xiii 196.53/202.04 and the Fe xiv 264.79/274.21 and 270.52A/274.21 line ratios are reliable using the atomic data calculated with the Flexible Atomic Code (FAC). On the other hand, we found a large discrepancy between the FAC theory and experiment for the commonly used Fe xii (186.85 + 186.88)/195.12 line ratio. These FAC theory calculations give results similar to the data tabulated in CHIANTI, which are commonly used to analyze solar observations. Our results suggest that the discrepancies seen between solar coronal density measurements using the Fe xii (186.85 + 186.88)/195.12 and Fe xiii 196.54/202.04 line ratios are likely due to issues with the atomic calculations for Fe xii.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

On the Use of Field RR Lyrae as Galactic Probes. V. Optical and Radial Velocity Curve Templates

We collected the largest spectroscopic catalog of RR Lyrae (RRLs) including ≈20,000 high-, medium-, and low-resolution spectra for ≈10,000 RRLs. We provide the analytical forms of radial velocity curve (RVC) templates. These were built using 36 RRLs (31 fundamental—split into three period bins—and five first-overtone pulsators) with well-sampled RVCs based on three groups of metallic lines (Fe, Mg, Na) and four Balmer lines (H$α$, H$β$, H$γ$, H$δ$). We tackled the long-standing problem of the reference epoch to anchor light-curve and RVC templates. For the V-band, we found that the residuals of the templates anchored to the phase of the mean magnitude along the rising branch are ~35% to ~45% smaller than those anchored to the phase of maximum light. For the RVC, we used two independent reference epochs for metallic and Balmer lines and we verified that the residuals of the RVC templates anchored to the phase of mean RV are from 30% (metallic lines) up to 45% (Balmer lines) smaller than those anchored to the phase of minimum RV. We validated our RVC templates by using both the single-point and the three phase point approaches. We found that barycentric velocities based on our RVC templates are two to three times more accurate than those available in the literature. We applied the current RVC templates to Balmer lines RVs of RRLs in the globular NGC 3201 collected with MUSE at VLT. We found the cluster barycentric RV of $V$$γ$ = 496.89 ± 8.37(error) ± 3.43 (standard deviation) km s -1 , which agrees well with literature estimates.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Emission Lines of Fe xiv, Fe xv, and Fe xvi in the Extreme Ultraviolet Region 40–100 Å

We report on emission spectra of iron in the extreme ultraviolet recorded at an electron density of ~10 11 cm -3 on the Lawrence Livermore electron beam ion trap facility. We present a summary of the observed emission lines, including wavelengths and emission intensities, and present spectra of pure Fe xiv through Fe xvi emission derived from our measurements in the 40–100 Å wavelength range. We show that spectral models, especially the current version of CHIANTI v10.0, describe the M-shell emission from these three charge states of iron reasonably well, and we are able to verify several transitions in CHIANTI for the first time.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

A Quantum-mechanical Treatment of Electron Broadening in Strong Magnetic Fields

Abstract Spectral line-shape fitting is an extremely useful tool in determining the gravity of white dwarf stars. This method is so far limited to nonmagnetic white dwarfs largely because the theory of line broadening in high magnetic fields is not as complete as in the nonmagnetic case. Current Stark+Zeeman models treat plasma particles classically and ignore the motion of the nucleus. We develop the formalism for a quantum-mechanical treatment of the perturbing electrons and include the nuclear motion as part of the broadening and explore their relative importance. The conditions we explore are those found in white dwarf and neutron star atmospheres. We find that, contrary to previous studies, the quantized perturbing electrons create more broadening than perturbers on a straight-path trajectory. Additionally, the quantization of the plasma electrons gives rise to resonances away from the line center. The nuclear motion creates an additional electric field, which also leads to an increase in line broadening; however, this effect in neutron star atmospheres is not as large as previously estimated. This suggests that neutron star spectral lines are sensitive to density and that their mass and radius can be obtained from spectral line fitting, which would help constrain the neutron star equation of state.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

A Quantum Mechanical Treatment of Electron Broadening in Strong Magnetic Fields. II. Large Enhancements due to Exchange Interactions

We present a quantum treatment of atom–electron collisions in magnetic fields, demonstrating the significant importance of including the effect of exchange that arises from two interacting electrons. We find strange behaviors that are not encountered in collisions without a magnetic field. In high magnetic fields, exchange can lead to orders of magnitude enhancements of collision cross sections. Additionally, the elastic collision cross sections that involve the ground state become comparable to those involving excited states, and states with large orbits have the largest contribution to the collisions. We anticipate significant changes to spectral line broadening in neutron star surfaces and atmospheres.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Modeling Competing Line-broadening Mechanisms in Neutron Star Atmospheres: Interference between Motional Stark and Ion Broadening

Neutron star surfaces have extremely high magnetic fields. In the atmosphere, the broadening of spectral lines will be substantial from the dense plasma as well as from the magnetic field. One broadening mechanism of note is due to the motional Stark effect (MSE)—an additional electric field that arises from the motion of the atom in the magnetic field. However, approximate formulae are often used to construct atmosphere models, and the MSE is assumed to be the dominant line-broadening mechanism even in ions. Detailed pressure-broadening models in these extreme magnetic fields are now currently being developed. In these more detailed models, it was suggested that the MSE may not be as large as previously predicted. If correct, this hypothesis implies that neutron star line widths might be dominated by pressure broadening rather than by motional Stark broadening. We find that, in the absence of plasma perturbations, for typical magnetic fields (B = 10 12 G), mid-Z elements, such as oxygen, have motional Stark widths of order 1 eV for transitions between dipole-allowed transitions from the ground state, though higher temperatures and transitions to higher-energy states are expected to have more broadening. The MSE also breaks down selection rules, giving rise to forbidden transitions, which have much larger widths. When plasma perturbations are included, we find that the plasma perturbation and motional Stark processes are not independent and, as a result, the spectral lines become narrow in a nontrivial way and display harmonics of the ion cyclotron frequency.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Formation and Consolidation of UN Nanostructures in U-Mo Fuel via Mechanical Alloying and Spark Plasma Sintering

Uranium-molybdenum (U-Mo) alloys show promise as a nuclear fuel system due to their high thermal conductivity and high fuel loading capability. However, U-Mo systems suffer from irradiation induced swelling ultimately affecting the cladding via mechanical and chemical interaction. To address these shortcomings, this thesis investigated the formation of uranium mononitride (UN) nanoparticles within a U-10Mo matrix. To promote the formation of UN, U-10Mo powders were mechanically alloyed under a high purity nitrogen cover gas (99.9995%) atmosphere. Variations were made in stainless steel milling media size, duration of milling, and number of times the milling jar was re-aerated with nitrogen gas. UN nanoparticulates were successfully formed within the U-Mo matrix and was characterized utilizing light element analysis, X-ray diffractometry, scanning and transmission-electron microscopy, electron energy loss spectroscopy, and atom probe tomography. Presence of the UN nanoparticles was found as early as 1-hour into the mechanical alloying process, and significant iron contamination found after 10-hours of milling. The U-Mo/UN powders were compacted using spark plasma sintering techniques in order to stabilize the nanostructure. U-Mo/UN compacts containing small amounts of neodymium and helium were analyzed to observe the defect migration tendencies of fission products within the fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Extracting doubly excited state lifetimes in helium directly in the time domain with attosecond noncollinear four-wave-mixing spectroscopy

The helium atom, with one nucleus and two electrons, is a prototypical system to study quantum many-body dynamics. Doubly excited states, or quantum states in which both electrons are excited by one photon, showcase electronic-correlation mediated effects. In this paper, the natural lifetimes of the doubly excited 1 P o 2 s n p Rydberg series and the 1 S e 2 p 2 dark state in helium in the 60–65 eV region are measured directly in the time domain with extreme-ultraviolet/near-infrared noncollinear attosecond four-wave-mixing (FWM) spectroscopy. The measured lifetimes agree with lifetimes deduced from spectral linewidths and theoretical predictions, and the roles of specific decay mechanisms are considered. While complex spectral line shapes in the form of Fano resonances are common in absorption spectroscopy of autoionizing states, the background-free and thus homodyned character of noncollinear FWM results exclusively in Lorentzian spectral features in the absence of strong-field effects. The onset of strong-field effects that would affect the extraction of accurate natural lifetimes in helium by FWM is determined to be approximately 0.3 Rabi cycles. This study provides a systematic understanding of the FWM parameters necessary to enable accurate lifetime extractions, which can be utilized in more complex quantum systems in the future. Published by the American Physical Society 2024

Rupprecht, Patrick (ORCID:000000026491793X)↗
DOE OSTI2020

Atomic Force Microscopy-Based Force Spectroscopy and Multiparametric Imaging of Biomolecular and Cellular Systems

During the last three decades, a series of key technological improvements turned atomic force microscopy (AFM) into a nanoscopic laboratory to directly observe and chemically characterize molecular and cell biological systems under physiological conditions. In this work, we review key technological improvements that have established AFM as an analytical tool to observe and quantify native biological systems from the micro- to the nanoscale. Native biological systems include living tissues, cells, and cellular components such as single or complexed proteins, nucleic acids, lipids, or sugars. We showcase the procedures to customize nanoscopic chemical laboratories by functionalizing AFM tips and outline the advantages and limitations in applying different AFM modes to chemically image, sense, and manipulate biosystems at (sub)nanometer spatial and millisecond temporal resolution. We further discuss theoretical approaches to extract the kinetic and thermodynamic parameters of specific biomolecular interactions detected by AFM for single bonds and extend the discussion to multiple bonds. Finally, we highlight the potential of combining AFM with optical microscopy and spectroscopy to address the full complexity of biological systems and to tackle fundamental challenges in life sciences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Sensitive Detection of an Erbium Isotope in an Atomic Beam Using Cavity Ring-Down Spectroscopy

Here, we have applied cavity ring-down spectroscopy (CRDS) to the study of the 166Er isotope in an atomic beam. These measurements were realized with an external cavity diode laser tuned to the 400.9 nm atomic transition of erbium and a customized high-finesse ring-down optical cavity under vacuum. Erbium atomic beams of different number densities were generated in a tantalum foil micro-crucible within the cavity. Absorbance values of the 166Er isotope between 3 × 10–6 and 7 × 10–5 were measured with a best-case precision on the order of 10–6, which is remarkable when considering the extreme temperatures at which the measurements were conducted, and the short detection path which is characteristic of collimated atomic beams. Number densities of erbium atoms were inferred to be between 2 × 106 and 6 × 107 cm–3. This work demonstrates for the first time the ability of studying dilute atomic beams of refractory materials with high accuracy utilizing CRDS. In these initial studies, we used erbium as a model system, but we expect to extend the proposed approach to the measurement of isotopes of uranium and plutonium for nuclear non-proliferation applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

ATOMIC Simulations and Experimental Data for CaCO3 Mixtures

This data consists of simulations and experimental measurements of laser-induced breakdown spectroscopy (LIBS). The simulations are produced by ATOMIC, a general purpose plasma modeling and kinetics code that has been designed to compute emission (or absorption) spectra from plasmas [1] and are used to develop a statistical characterization of matrix effects. Our overall suite of simulations includes contains several sets of simulations: training and validation sets of simulations for three and four element mixtures of calcium, carbon, oxygen, and nitrogen (included to account for atmosphere) along with simulations of the individual elements. The 4-element simulations include the mixture of all four elements mentioned and for each of the four individual elements. The 3-element simulations include output for the mixture of calcium, carbon, oxygen and for these three individual elements. The training data were produced using a 600-run design, shown in Figure 1, that varies input parameters temperature (T), electron density (Ne), and proportion of the elements calcium, carbon, oxygen, and nitrogen (Ca; C; O; N) for the 4 element output. The 3-element output includes all parameters except for the proportion of nitrogen. The element proportions (all the variables but T and Ne) sum to one and are unused in the single-element simulations. The validation data was produced with a 80-run design shown in Figure 2. The training and validation simulation outputs for the 4-element simulations for the mixture and for the single element calcium are shown as sample simulations in Figures 3 and 4 respectively. The simulations produce spectra over a range of 190nm - 950nm that roughly mimics the range collected by the SciAps Z-300 LIBS instrument that was used for the experimental data. The measured spectra for a CaCO3 (which may include contribution from Earth's atmosphere) in the experiment is shown in in Figure 5. All files are kept in directories whose names indicate the elemental composition (CaCO3, Ca, C, O, or N), number of elements (3 or 4), and purpose (training, which is not labeled in the file name, or validation) with file names numbered to indicate the line in the design files used to produce the simulation. The designs are provided as text files with names indicating their purpose. The experimental data is provided as a CSV file. [1] J Colgan, EJ Judge, DP Kilcrease, and JE Barefield II. Ab-initio modeling of an iron laser-induced plasma: Comparison between theoretical and experimental atomic emission spectra. Spectrochimica Acta Part B: Atomic Spectroscopy, 97:65{73}, 2014.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗