Search NASA⌕ Search

SEARCH · Search NASA

Results for “Behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Influence of high-strain-rate compression and subsequent heat treatment on (TiNbZr) 89 (AlTa) 11 refractory high-entropy alloys: Dynamic-mechanical behavior and microstructural changes

This study explored the dynamic-mechanical behavior of a novel low-density (TiNbZr) 89 (AlTa) 11 refractory high-entropy alloy (RHEA) across strain rates ranging from 1.0×10 3 to 3.5×10 3 s –1 . A significant increase in the yield and ultimate compressive strengths with rising strain rates up to 3.0×10 3 s –1 was observed and attributed to enhanced dislocation activities and stress-induced microstructural transformations. The formation of the B2 phase and Zr 5 Al 3 precipitates was found to be crucial in bolstering the alloy strength at high strain rates. Beyond strain rates of 3.0×10 3 s –1 , a decrease in strength occurred due to thermal softening and strain localization. Microstructural analyses at 3.5×10 3 s –1 revealed grain refinement, the development of micro shear bands, and dislocation tangles, which were indicative of dynamic recrystallization. Besides, the findings also revealed that the post-dynamic compression heat treatment further enhanced the hardness and microstructural stability of the alloy. These results highlight the potential of the (TiNbZr) 89 (AlTa) 11 RHEA for applications requiring materials with high strength-to-weight ratios, particularly in dynamically loaded environments. It is expected that the results of this study will further advance our fundamental understanding of the behavior of RHEAs under extreme conditions, thereby opening new avenues for material innovation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A structural underpinning of the lower critical solution temperature (LCST) behavior behind temperature-switchable liquids

In this work, we use state-of-the-art X-ray scattering and molecular dynamics to analyze amine-water mixtures that show the unusual lower critical solution temperature (LCST) behavior. The goal is to provide direct experimental evidence for the entropy-lowering molecular cluster formation hypothesized as necessary for LCST behavior. Differential wide-angle X-ray scattering and pair distribution analysis and small-angle X-ray scattering measurements were combined with molecular modeling and liquid-liquid equilibrium measurements, revealing direct experimental evidence for the hypothesis. However, the response of the amine phase to accommodating water is even more subtle than the simple hypothesis suggests, with the formation of robust nanoscale reverse micelles. The techniques developed in this paper can be expected to yield insights in the use of temperature-switchable liquids in solvent extraction and other separations, and the stabilization of organelles in living cells that do not have physical membranes but do require compositional gradients to operate.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A finite-strain rate- and pressure-dependent constitutive framework for analyzing shock compression behavior of cemented tungsten carbides to 100 GPa

In the present study a thermodynamically-consistent finite-strain rate-and-pressure-dependent constitutive framework is implemented to analyze the shock-compression behavior of cemented tungsten carbides to 100 GPa. Central to this framework is the use of logarithmic strain with a set of invariant basis that allow the Cauchy stress tensor to be expressed as a sum of three response terms that are mutually orthogonal, thus permitting a complete separation of the deviatoric and volumetric (pressure) response. An overstress viscoplasticity model that includes strain and strain rate hardening along with thermal softening is used to represent the deviatoric response, while a complete Mie-Grüneisen equation of state (EoS) is used to obtain the pressure response. Using this formulation, the shock-induced compression behavior of cemented tungsten carbide - obtained from planar plate impact experiments using a 30 mm powder gun to peak stresses of up to ~100 GPa - is analyzed to better understand the structure of the measured shock wave profiles and the associated in-material shock quantities. Of particular interest is the evolution of material inelasticity and strength, and temperature in the tungsten carbide samples during the shock compression process.

Cemented tungsten carbide↗
DOE OSTI2025

Microstructure and mechanical behavior of a TiC nanoprecipitate strengthened V Alloy

The V-4Cr-4Ti (V44) alloys have been proposed as the prime candidate structural material for self-cooled liquid Li blanket and other designs for fusion energy applications. However, the applications of the V44 alloy are limited to a narrow operation temperature window, due to reduction in creep strength at or above 700 °C and susceptibility to irradiation hardening and embrittlement when irradiated below 400 °C. Here, in this work, we explore the feasibility of designing a novel V alloy to form a high number density of TiC nanoprecipitates, in order to simultaneously improve creep strength and provide defect sinks to mitigate irradiation hardening. Computational thermodynamics was used to design a new alloy (V44C) to achieve our goal of high TiC nanoprecipitates density within the alloy V44 matrix. To ensure scalability, the new alloy was made through arc-melting and ingot-casting followed by hot forging, cold rolling and heat treatments of homogenization and precipitation aging. The microstructure was characterized by SEM, TEM, XRD and APT, confirming the existence of nanoprecipitates predicted in the thermodynamic calculations. In addition to microstructural evaluation tensile properties at room temperature and 700 °C, and Charpy impact energy at room temperature were measured. The microstructure and mechanical properties were then compared with those from a historic reference V44 alloy. The tensile strength improvement in V44C was rationalized based on particle and solid solution strengthening mechanism. The fracture behavior was discussed based on the fractography results and necking deformation behavior.

Alloys development↗
DOE OSTI2024

The carbon challenge: Design, synthesis, and chemisorption behavior of solid sorbents in direct air capture of carbon dioxide

Direct air capture (DAC) of CO 2 is a promising solution for reducing the carbon footprint through "negative emission" technology. However, the low CO 2 concentration (~400 ppm) and the dynamic nature of DAC processes present challenges in designing effective sorbent systems. Recent advancements in material design and structural engineering have led to the development of high-performance solid sorbents, offering a more stable, safe, and energy-efficient alternative to traditional liquid CO 2 capture methods. This review highlights progress in solid sorbent-based DAC, focusing on amine-modified materials, hydrogen-bonded frameworks, and ionic liquid-engineered scaffolds. The discussion covers design principles, synthesis methodologies, and their impact on CO 2 chemisorption, comparing the advantages and limitations of each approach. Characterization techniques, especially operando methods and computational tools, are reviewed to understand sorbent behavior during CO 2 integration and release. The reaction pathways and interaction mechanisms of these sorbents with CO 2 are analyzed to guide future design. Additionally, the CO 2 chemisorption behaviors, including capacity, sorption kinetics, recyclability, and durability in the presence of gaseous impurities and under humid conditions will be evaluated and compared. Further, the review offers unique insights into the physical properties, chemical structures, and surface engineering effects of these sorbents, based on comprehensive characterization and evaluation techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Wrought FeCrAl alloy (C26M) cladding behavior and burst under simulated loss-of-coolant accident conditions

Cladding burst experiments for FeCrAl cladding were performed in the Severe Accident Test Station facility at Oak Ridge National Laboratory. These experiments were simulated using the BISON fuel performance code to better understand the cladding plastic behavior and failure under simulated loss-of-coolant accident conditions. 3D cladding surface boundary conditions were generated using composite axial and azimuthal profiles from experiment thermocouple data. To improve the simulation analysis capabilities in BISON for cladding burst behavior, new thermal creep, plasticity, and failure stress models specific to C26M, a wrought FeCrAl alloy, were developed and implemented. Initial cladding burst results indicated a general underprediction in the failure temperature of the six cladding burst simulations versus the observed failure temperatures. Close investigation of the experiment timing versus the underlying tensile test data revealed that, compared with the tensile specimens, the cladding tubes did not experience the same long holding time at high temperatures. New tensile tests were performed at high temperatures using a temperature ramp similar to the simulated loss-of-coolant accident experiments. These new tensile curves showed an approximately 80% increase in the ultimate tensile strength of the C26M alloy, indicating that a holding time of 10 min at 700 °C and 800 °C allows annealing to change the material microstructure. Using the updated tensile properties, the burst temperatures and stresses from the simulations showed remarkable agreement with the experimental results. This study was then extended by varying the initial pressure to highlight the burst temperature difference between standard Zircaloy-4 and C26M cladding under equivalent conditions. The results show that C26M has a burst temperature that is approximately 70–130 K greater than that of Zircaloy-4. In conclusion, these modeling predictions can be further improved by collecting high-temperature tensile data for C26M beyond the temperature ranges used in this work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Solute diffusion behavior during heat treatment and its impact in Sc-microalloyed Al-Cu system

Scandium (Sc) is a promising microalloying element that enhances the strength and thermal stability of aluminum (Al) alloys. However, these benefits are not fully realized in aluminum-copper (Al-Cu) systems, and corrosion resistance often declines due to the complex phase evolution and diffusion behavior of Cu and Sc. Here, to clarify this, solute diffusion behavior and Cu-Sc interaction during heat treatment (HT) were investigated using in situ synchrotron-based transmission x-ray microscopy (TXM), wide-angle x-ray scattering (WAXS), and x-ray absorption near-edge structure (XANES) spectroscopy. The results, supported by electron microscopy, reveal strong Cu-Sc bonding that significantly impedes solute diffusion, leading to inhomogeneous solute distribution and non-uniform precipitation. Moreover, the Al-Cu-Sc eutectic phase exhibits high thermal stability, resisting dissolution even near the matrix liquidus. These findings quantitatively elucidate the sluggish diffusion kinetics of Cu and Sc, which can help redesign HT schedules to improve both mechanical properties and corrosion resistance in Sc-microalloyed Al-Cu alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tribological behavior of spark plasma sintered Ti 3 SiC 2 MAX phase composites

Ti₃SiC₂ MAX phases are considered promising candidates for tribological applications; but, their low hardness (5-6 GPa) can lead to increased abrasive wear and higher wear rates. This study investigates the effect of incorporating hard SiC particles on microstructure, mechanical, and tribological behavior of Ti₃SiC₂-SiC-based MAX phase composites prepared using spark plasma sintering at 1400 °C, 40 MPa, 15-minute holding time. Phase and microstructural characterization of composites confirmed the formation of Ti₃SiC₂ MAX phase (90%) along with TiC as a minor phase (10%). For Ti₃SiC₂-SiC, homogeneous distribution of SiC grains within Ti₃SiC₂ matrix resulted in increased hardness from ~11.6 GPa to ~14.8 GPa; however, the flexural strength decreased from ~615 MPa to ~597 MPa due to coefficient of thermal expansion mismatch. Tribological behavior of Ti₃SiC₂-SiC MAX phase composites was assessed using unidirectional sliding ball-on-flat tests with a 52100 steel ball at different loads and a constant speed of 0.05 m/s. SiC reinforced composites exhibited a decreased friction coefficient from 0.39 to 0.29 and wear rates comparable to Ti₃SiC₂ (7-10×10⁻³ mm³/N·m). SEM and EDS analysis of the worn surfaces indicated material transfer from the steel ball counter body and its oxidation due to frictional heating, at lower loads (2N and 5N), whereas at higher load (10N), fracture of the transfer layer dominated, with the presence of microcracks, delamination, grain pull-outs, and wear debris. Improved mechanical properties and good adhesion of SiC with Ti₃SiC₂ matrix resulted in reduced microcracks and grain pull-outs, making Ti₃SiC₂-SiC/Steel tribo-pair more suitable for tribological applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

d -Electron Heavy Fermion Behavior in a Near-Room-Temperature Polar Metallic Ferrimagnet: A Case of Mn 5 SiC

Polycrystalline Mn 5 SiC was synthesized by using a high-temperature solid-state method. Mn 5 SiC adopts a polar space group (Cmc2 1 ) with six crystallographic Mn sites confirmed by X-ray and neutron diffraction, transmission electron microscopy, and second harmonic generation experiments. The complex crystal structure features edge-sharing trigonal prisms and icosahedra, as well as face/edge-sharing pentagonal prisms. Magnetic measurements indicate ferrimagnetic ordering with a transition temperature of 284 K. The ferrimagnetic structure (magnetic space group Cm’c’2 1 ) was further identified by powder neutron diffraction, where collinear Mn spins align along the crystallographic c-axis. The refined magnetic moment for each crystallographic Mn site at 4 K is 1.8(2), −2.42(9), −1.72(8), 0.51(6), 0.50(4), and 1.7(2) μ B . Density functional theory calculations confirm both the metallic behavior and the ferrimagnetic structure observed experimentally and further provide insight into the observed Mn moment dependence across crystallographic sites. The resistivity and specific heat measurements and density functional theory calculations reveal a substantially large Kadowaki–Woods ratio of 5 × 10 –5 μΩ·cm/(mJ/mol) 2 and a many-body renormalization factor of 5.5, indicating the unusual heavy Fermion behavior in such an itinerant magnetic metal.

Messegee, Zachary T. [George Mason University, Fai↗
DOE OSTI2025

Complex Adsorption Behavior of Neodymium and Ytterbium on Structurally-Distinct Alumina Surfaces

New sources of rare earth elements (REEs) are needed to support a green energy transition. REEs adsorbed to aluminum-rich clays in weathering deposits represent important resources but the mechanisms responsible for their retention and ease of extraction are unresolved. Disordered coordination and co-occurrence of multiple species pose challenges to investigating REE adsorption processes via established spectroscopic methods. In this study, we applied element-specific surface crystallography methods to obtain a new perspective on the complexity of REE adsorption mechanisms and affinities. Alumina (001) and (012) crystal surfaces were utilized to evaluate surface-specific controls on Nd(III) and Yb(III) adsorption behavior. The REEs displayed similar total adsorption to alumina (001) as a mixture of inner- and outer-sphere complexes, but Nd displayed a greater proportion of inner-sphere binding. Adsorption of ordered inner- and outer-sphere REE species was substantially lower on alumina (012). These distinct behaviors reflect differences in the surface functional group charging and topography of the two surfaces. However, alumina (012) also hosted a substantial population of disordered adsorbed species, especially for Nd, potentially associated with Al vacancy surface defects. Here, the accumulation of light versus heavy REEs via adsorption in weathering deposits likely results from multiple, competing reactions affected by clay particle morphology. Leaching procedures for resource recovery should account for differential rates of desorption by coexisting inner- and outer-sphere REE surface complexes.

58 GEOSCIENCES↗
DOE OSTI2024

Non-Isochronal Behavior of Charge Transport at Liquid–Liquid and Liquid–Glass Transition in Aprotic Ionic Liquids

A reversible, first-order transition separating two liquid phases of a single-component material is a fascinating yet poorly understood phenomenon. Here, we investigate the liquid–liquid transition (LLT) ability of two tetraalkylphosphonium ionic liquids (ILs), [P 666,14 ]Cl and [P 666,14 ][1,2,4-triazolide], using differential scanning calorimetry and dielectric spectroscopy. The latter technique also allowed us to study the LLT at elevated pressure. We found that cooling below 205 K transforms [P 666,14 ]Cl and [P 666,14 ][Trz] from one liquid state (liquid 1) to another (the self-assembled liquid 2), while the latter facilitates the charge transport decoupled from structural dynamics. In contrast to temperature, pressure was found to play an essential role in the self-organization of a liquid 2 phase, resulting in different time scales of charge transport for rapidly and slowly compressed samples. Furthermore, τ σ (P LL ) was found to be much shorter than τ σ (T LL , P=atm), which constitutes the first example of non-isochronal behavior of charge transport at LLT. In turn, dielectric studies through the liquid–glass transition revealed the non-monotonic behavior of τ σ at elevated pressure for [P 666,14 ]Cl, while for [P 666,14 ][Trz] τ σ (P g ) was almost constant. These results highlight the diversity of liquid–liquid transition features within the class of phosphonium ionic liquids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Insight into the Competitive Adsorption Behavior of Polymer Chains in Silica Nanopores by Small-Angle Neutron Scattering

Processive hydrogenolysis catalysts, in which a metal nanoparticle (e.g., Pt) embedded at the bottom of a cylindrical silica nanopore can repeatedly cleave polymer chains and produce value-added hydrocarbon products, offer a potential solution for billions of tons of waste plastics. As the chain stays longer near the Pt catalysts, it would have a higher chance of getting cut, and therefore the molecular weight distribution of the product could be affected by the adsorption behavior of virgin chains (long polymers) versus cleaved chains (short polymers) into the nanopores. Further, this work reports a model study to understand the competitive adsorption behavior of the two different molecular weight polymers that are mixed, mimicking the reaction medium in the intermediate stage of the catalytic reaction. This study employs small-angle neutron scattering (SANS), which takes advantage of contrast differences between hydrogenous and deuterated polystyrenes to experimentally observe the relative composition of the two polymers in the silica nanopores. Our results reveal preferential adsorption of longer chains in the silica nanopores, which is consistent with the theoretical prediction in the literature for the case of the enthalpic attraction between polymers and pore walls.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing the Effects of the First Atomic Layer on the Dynamic Behavior of Sub-2 nm MgO/Al 2 O 3 Memristors

As electronic devices continue to scale down from the current sub-5 nm range, atomic-scale control of defects becomes increasingly crucial to suppressing their impact on the physical properties of the devices. Memristors present an excellent example as a nonlinear and dynamic device with high speed and endurance required for electronic applications ranging from neuromorphic computing to nonvolatile memories. Herein we investigate the impact of atomic defects in sub-2 nm thick MgO/Al 2 O 3 atomic layer stack (ALS) memristors that use an M1 (switching layer)/M2 (oxygen vacancy reservoir layer) bilayer structure grown using in vacuo atomic layer deposition (iALD). Intriguingly, we revealed a direct correlation of the atomic defects in the M2 layer with the memristor dynamic behavior using a combined analysis of in situ scanning tunneling spectroscopy (iSTS) on the M2 layer and ex situ characterization on the memristors. Specifically, incomplete coverage of the 1st ALD atomic layer of M2 on the electrode yields defects at the M2/electrode interface. Despite the monotonic increase of ALD coverage, by almost three-fold from ~30% to >90%, at completion of the M2 layer of ~ 0.7 nm in thickness, the impact of the defects on the M2/electrode interface has been found detrimental to both memristor switching speed and endurance. Guided by atomistic simulation, we addressed the issue of interface defects via tuning of the Al surface hydroxylation to increase the first atomic layer ALD coverage to ~75%, leading to improved memristor switching speed and endurance by several orders of magnitude. In conclusion, these findings shed light on the correlation between the atomic defects and the dynamic behavior of sub-2 nm memristors and the importance of minimizing the atomic defects in memristors for future electronic applications.

Atomic Layer Deposition↗
DOE OSTI2025

Electrochemical Behavior of Cerium at an Indium Tin-Doped Oxide Electrode in Acidic Media

The redox behavior and speciation of cerium at mesoporous thin films composed of nanoparticles of indium tin-doped oxide (nITO) electrodes were characterized in pH 4.8, 0.1 M acetate buffer and both 0.1 and 1 M HNO 3 using electrochemical techniques and X-ray photoelectron spectroscopy. Anodic deposition of ceria species from Ce(III) to the nITO electrode was achieved under all solvent conditions via spontaneous condensation of electrochemically generated ceric hydroxide species. In 1 M nitric acid, the rate of CeO 2 dissolution is on the same order as CeO 2 deposition, resulting in negligible amounts of CeO 2 electrodeposited at the nITO surface. The cathodic stripping of CeO 2 from the nITO substrate deposited in 0.1 M nitric acid or pH 4.8 acetate buffer follows a 2-step process where Ce(IV)-oxide is initially reduced to an unstable Ce(III)-oxide species that rapidly undergoes acid catalyzed dissolution to yield soluble Ce(III) (aq) . These findings provide a foundation for the pH and anodic potential controlled deposition of CeO 2 thin films to ITO substrates, which can aid in the development of materials composed of ceria. As a result, they can also be used to infer likely analogous actinide redox behavior and speciation at these electrodes.

Cerium↗
DOE OSTI2024

Transient behavior of oxide fuels with controlled microstructure and Cr2O3 additive

Abstract Microstructure and Cr 2 O 3 doping profoundly impact the thermal-mechanical properties and fracture of oxides fuels. It is a challenge to study the transient behavior of nuclear fuels under loss-of-coolant-event (LOCA). In this study, the crack behavior of UO 2 pellets with controlled grain structure and Cr 2 O 3 doping was tested with rapid power ramping (300−900 °C per min) mimicking a prototypical LOCA heating profile. Dense micron-sized UO 2 pellets display well-maintained integrity without cracking with the ramping up to 1500 °C at a heating rate of 8 °C per second. Fracture occurs in both pure and Cr 2 O 3 -doped dense nano-sized UO 2 pellets. The Cr 2 O 3 doped oxide fuel pellet with a larger grain size (~ 22.2 μm) displays the best performance under LOCA testing due to its highest thermal conductivity under high temperature. FEA calculations suggest a temperature gradient across the fuel pellet during transient testing, resulting in residual stress and cracking, which can be correlated with their thermal-mechanical properties.

Zhao, Dong (ORCID:0000000191377257)↗
DOE OSTI2026

Corn grown on dredged sediments alters rat behavior in the elevated plus maze via the gut mycobiome

The use of marginal lands for growing food has increased worldwide. Many of these lands are supplemented with soil amendments to enhance their productivity, but they may also introduce contaminants depending on their origin. The use of sediments dredged from commercial waterways as a soil amendment has increased in recent years. However, there is significant concern regarding their potential to negatively affect public health by transferring contaminants, like metals, to the food supply. This study examined the behavior, microbiome and physiology of rats fed corn grown on dredged sediments with rats fed commercial feed corn and related those metrics to kernel metal content. Metal content did not differ between kernels grown on dredged sediments and feed corn for most metals except iron which was greater in commercial feed corn. Although there is some variability by animal response, animals fed corn grown on dredged sediments had a gut microbial community that generally promoted anxiety-like behavior while animals fed feed corn had a gut microbial community that promoted a more typical response. These findings suggest the effect of corn grown on dredged sediments on public health is complex and highlights the need for further investigation.

Rua, Megan [Wright State University, Dayton, OH]↗
DOE OSTI2024

Discerning molecular-level CO 2 adsorption behavior in amine-modified sorbents within a controlled CO 2 /H 2 O environment towards direct air capture

Sorbents designed for direct air capture (DAC) play a crucial role in the pursuit of achieving net-zero carbon dioxide emissions. This study elucidates CO 2 adsorption from dilute, humidified CO 2 streams onto an amine-modified benchmark DAC adsorbent via solid-state NMR spectroscopy. Various NMR techniques, including 1D 1 H MAS, 13 C MAS, 2D 1 H– 13 C HETCOR NMR, and 1 H R 2 and R 1ρ relaxometry reveal the impact of CO 2 partial pressure and H 2 O on CO 2 adsorption behavior. Here we find that CO 2 concentration governs the stepwise formation of ammonium carbamate, carbamic acid, and physisorbed CO 2 , where relative humidity (RH) at a desired low (<400 ppm) CO 2 loading affects total CO 2 uptake. The relaxation studies reveal the cooperative or competitive nature of H 2 O–CO 2 sorption in CO 2 -dilute humid gas, and in particular polymer swelling upon humidification. From those results, we demonstrate that the observed absorption capacity enhancement by humidity is caused by pore opening due to sorbent swelling, and not by bicarbonate formation. This NMR-discerned speciation provides insights into sorption behavior at different RHs in dilute CO 2 gas streams, simulating real-world atmospheric conditions, and governs the design of efficient and adaptable material-process combinations for solid sorbent DAC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Performance enhancement of aqueous ionic liquids with lower critical solution temperature (LCST) behavior through ternary mixtures

Thermally responsive ionic liquids (ILs) exhibit liquid–liquid phase separation when mixed with water and heated above a lower critical solution temperature (LCST), resulting in a water-rich (WR) and an IL-rich (ILR) phase. These binary IL–water mixtures can be employed in a variety of thermodynamic processes such as forward osmosis (FO) desalination, for which two solution properties are desirable: low phase separation temperature and high osmotic strength (osmolality). However, these two properties are interlinked, with ILs that exhibit higher osmotic strengths typically requiring higher phase separation temperatures. This behavior tends to arise from the hydrophilicity of the IL cations, which enhances osmotic strength while also elevating the phase separation temperature. In this work, we highlight a pathway to overcome this tradeoff by developing ternary IL mixtures (two ILs with varying cation hydrophilicity mixed with water), which lowers the phase separation temperature while maintaining and even enhancing the osmotic strength of the solution. We characterize the mixing behavior (osmolality, phase separation temperature, WR phase purity, and WR to ILR phase mass ratio) of four ILs as a function of their concentration in solution. We find that an enhancement of up to 81.6% in the osmolality with a concomitant reduction of up to 15.4% in the phase separation temperature can be achieved using this approach. The ternary mixture is also shown to improve the phase separation kinetics by nearly 95% compared to the binary mixture. Overall, this work highlights a new pathway to improve the performance of LCST ILs for water and energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗