The magnetosphere and its boundary layer
Magnetosphere and boundary layer measurements by IMP-I satellite - solar wind, cosmic ray, and geomagnetic field
EXPLORER XVIII SATELLITE↗
SEARCH · Search NASA
Results for “Boundary layer”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Investigations of Effects of Surface Temperature and Single Roughness Elements on Boundary-Layer Transition
The laminar boundary layer and the position of the transition point were investigated on a heated flat plate. It was found that the Reynolds number of transition decreased as the temperature of the plate is increased. It is shown from simple qualitative analytical considerations that the effect of variable viscosity in the boundary layer due to the temperature difference produces a velocity profile with an inflection point if the wall temperature is higher than the free-stream temperature. This profile is confirmed by measurements. The instability of inflection-point profiles is discussed. Studies of the flow in the wake of large, two-dimensional roughness elements are presented. It is shown that a boundary-layer can separate and reattach itself to the wall without having transition take place.
Liepmann, Hans W↗
Effect of transducer size, shape, and surface sensitivity on the measurement of boundary- layer pressures.
Various boundary layer parameters and transducer shape effect on Measurement error of random pressure field by finite size transducer
PRESSURE FIELD↗
Practical calculation of laminar and turbulent bled-off boundary layers
Bleed-off of boundary layer material is shown to be an effective means for reducing drag by conserving the laminar boundary layer and preventing separation of the turbulent boundary layer. The case in which the two effects of bleed-off overlap is examined. Empirical methods are extended to the case of bleed-off. Laminar and turbulent boundary layers are treated simultaneously and the approximation differential equations are solved without an uncertain error. The case without bleed-off is also treated.
Eppler, R.↗
Effect of upstream sidewall boundary layer removal on an airfoil test
Sidewall boundary layer effects were investigated by applying partial upstream sidewall boundary layer removal in the Langley 0.3-m transonic cryogenic tunnel. Over the range of sidewall boundary layer displacement thickness of these tests the influence on pressure distribution was found to be small for subcritical conditions; however, for supercritical conditions the shock position was affected by the sidewall boundary layer. For these tests (with and without boundary layer remove) comparisons with predictions of the GRUMFOIL computer code indicated that Mach number corrections due to the sidewall boundary layer improve the agreement for both subcritical and supercritical conditions. The results also show that sidewall boundary layer removal reduces the magnitude of the sidewall correction; however, a suitable correction must still be made.
Johnson, C. B.↗
A general integral form of the boundary-layer equation for incompressible flow with an application to the calculation of the separation point of turbulent boundary layers
Explore the source record for details and available documents.
Tetervin, Neal↗
Field-aligned currents in the magnetospheric boundary layer
A self-consistent magnetopause-boundary layer model is constructed which contains two current layers, one for the magnetopause and one for the magnetosphere-boundary layer transition region. Field-aligned sheet currents in the boundary layer are generated by the plasma flow along the boundary layer. The magnitude of these boundary layer field-aligned currents is about 10 to the -8th A/sq m, which can be scaled along field lines to about 5 x 10 to the -6th A/sq m near the ionosphere and therefore can be identified as a possible source for the auroral sheet currents. The cross-field current density in the model is also about 10 to the -8th A/sq m, which is sufficient to excite the lower-hybrid-drift waves to produce the observed electromagnetic fluctuations in the magnetopause-boundary layer region.
Lee, L. C.↗
Computer simulation of shock wave boundary layer interaction
Development of a boundary layer correction for an analysis program previously used by Bauer et al. (1972) to study two-dimensional flow past transonic airfoils at off-design conditions where shocks which interact with the boundary layer appear. Using a method which combines conformal mapping with a finite-difference scheme due to Murman and Cole (1971), an analysis is made of the interaction between shock waves on a supercritical wing section and a turbulent boundary layer, assuming that the shocks are weak and that separation is insignificant. It is shown that relatively simple shock wave/boundary layer interactions of the kind envisioned in this study can be treated by determining the displacement thickness iteratively together with the flow and altering the profile accordingly. It is concluded that the proposed boundary layer correction appears to furnish an essential improvement in cases where both pronounced aft loading and a large enclosed supersonic region of flow are present.
Bauer, F.↗
Analysis of dynamic stall using unsteady boundary-layer theory
The unsteady turbulent boundary layer and potential flow about a pitching airfoil are analyzed using numerical methods to determine the effect of pitch rate on the delay in forward movement of the rear flow reversal point. An explicit finite difference scheme is used to integrate the unsteady boundary layer equations, which are coupled at each instant of time to a fully unsteady and nonlinear potential flow analysis. A substantial delay in forward movement of the reversal point is demonstrated with increasing pitch rate, and it is shown that the delay results partly from the alleviation of the gradients in the potential flow, and partly from the effects of unsteadiness in the boundary layer itself. The predicted delay in flow-reversal onset, and its variation with pitch rate, are shown to be in reasonable agreement with experimental data relating to the delay in dynamic stall. From the comparisons it can be concluded (a) that the effects of time-dependence are sufficient to explain the failure of the boundary layer to separate during the dynamic overshoot, and (b) that there may be some link between forward movement of the reversal point and dynamic stall.
Scruggs, R. M.↗
Acoustic Receptivity of Mach 4.5 Boundary Layer with Leading- Edge Bluntness
Boundary layer receptivity to two-dimensional slow and fast acoustic waves is investigated by solving Navier-Stokes equations for Mach 4.5 flow over a flat plate with a finite-thickness leading edge. Higher order spatial and temporal schemes are employed to obtain the solution whereby the flat-plate leading edge region is resolved by providing a sufficiently refined grid. The results show that the instability waves are generated in the leading edge region and that the boundary-layer is much more receptive to slow acoustic waves (by almost a factor of 20) as compared to the fast waves. Hence, this leading-edge receptivity mechanism is expected to be more relevant in the transition process for high Mach number flows where second mode instability is dominant. Computations are performed to investigate the effect of leading-edge thickness and it is found that bluntness tends to stabilize the boundary layer. Furthermore, the relative significance of fast acoustic waves is enhanced in the presence of bluntness. The effect of acoustic wave incidence angle is also studied and it is found that the receptivity of the boundary layer on the windward side (with respect to the acoustic forcing) decreases by more than a factor of 4 when the incidence angle is increased from 0 to 45 deg. However, the receptivity coefficient for the leeward side is found to vary relatively weakly with the incidence angle.
Malik, Mujeeb R.↗
Effects of Goertler vortices, wall cooling and gas dissociation on the Rayleigh instability in a hypersonic boundary layer
In a hypersonic boundary layer over a wall of variable curvature, the region most susceptible to Goertler vortices is the temperature adjustment layer sitting at the edge of the boundary layer. This temperature adjustment layer is also the most dangerous site for Reyleigh instability. We investigate how the existence of large amplitude Goertler vortices affects the growth rate of Rayleigh instability. The effects of wall cooling and gas dissociation on this instability are also studied. We find that all these mechanisms increase the growth rate of Rayleigh instability and are therefore destabilizing.
Fu, Yibin↗
Dynamic behavior of an unsteady trubulent boundary layer
Experiments on an unsteady turbulent boundary layer are reported in which the upstream portion of the flow is steady (in the mean) and in the downstream region, the boundary layer sees a linearly decreasing free stream velocity. This velocity gradient oscillates in time, at frequencies ranging from zero to approximately the bursting frequency. For the small amplitude, the mean velocity and mean turbulence intensity profiles are unaffected by the oscillations. The amplitude of the periodic velocity component, although as much as 70% greater than that in the free stream for very low frequencies, becomes equal to that in the free stream at higher frequencies. At high frequencies, both the boundary layer thickness and the Reynolds stress distribution across the boundary layer become frozen. The behavior at higher amplitude is quite similar. At sufficiently high frequencies, the boundary layer thickness remains frozen at the mean value over the oscillation cycle, even though flow reverses near the wall during a part of the cycle.
Parikh, P. G.↗
Dynamic behavior of an unsteady turbulent boundary layer
Experiments on an unsteady turbulent boundary layer are reported in which the upstream portion of the flow is steady (in the mean) and in the downstream region, the boundary layer sees a linearly decreasing free stream velocity. This velocity gradient oscillates in time, at frequencies ranging from zero to approximately the bursting frequency. For the small amplitude, the mean velocity and mean turbulence intensity profiles are unaffected by the oscillations. The amplitude of the periodic velocity component, although as much as 70 percent greater than that in the free stream for very low frequencies, becomes equal to that in the free stream at higher frequencies. At high frequencies, both the boundary layer thickness and the Reynolds stress distribution across the boundary layer become frozen. The behavior at higher amplitude is quite similar. At sufficiently high frequencies, the boundary layer thickness remains frozen at the mean value over the oscillation cycle, even though flow reverses near the wall during a part of the cycle. Previously announced in STAR as N81-28392
Parikh, P. G.↗
Lecture Series "Boundary Layer Theory". Part I - Laminar Flows: Laminar Flows - Part 1
In the lecture series starting today author want to give a survey of a field of aerodynamics which has for a number of years been attracting an ever growing interest. The subject is the theory of flows with friction, and, within that field, particularly the theory of friction layers, or boundary layers. A great many considerations of aerodynamics are based on the ideal fluid, that is the frictionless incompressibility and fluid. By neglect of compressibility and friction the extensive mathematical theory of the ideal fluid, (potential theory) has been made possible. Actual liquids and gases satisfy the condition of incomressibility rather well if the velocities are not extremely high or, more accurately, if they are small in comparison with sonic velocity. For air, for instance, the change in volume due to compressibility amounts to about 1 percent for a velocity of 60 meters per second. The hypothesis of absence of friction is not satisfied by any actual fluid; however, it is true that most technically important fluids, for instance air and water, have a very small friction coefficient and therefore behave in many cases almost like the ideal frictionless fluid. Many flow phenomena, in particular most cases of lift, can be treated satisfactorily, - that is, the calculations are in good agreement with the test results, -under the assumption of frictionless fluid. However, the calculations with frictionless flow show a very serious deficiency; namely, the fact, known as d'Alembert's paradox, that in frictionless flow each body has zero drag whereas in actual flow each body experiences a drag of greater or smaller magnitude. For a long time the theory has been unable to bridge this gap between the theory of frictionless flow and the experimental findings about actual flow. The cause of this fundamental discrepancy is the viscosity which is neglected in the theory of ideal fluid; however, in spite of its extraordinary smallness it is decisive for the course of the flow phenomena.
Schlichting, H.↗
Boundary Layer Theory: Laminar Flows - Part 1
The purpose of this presentation is to give you a survey of a field of aerodynamics which has for a number of years been attracting an ever growing interest. The subject is the theory of flows with friction, and, within that field, particularly the theory of friction layers, or boundary layers. As you know, a great many considerations of aerodynamics are based on the so-called ideal fluid, that is, the frictionless incompressible fluid. By neglect of compressibility and friction the extensive mathematical theory of the ideal fluid (potential theory) has been made possible.
Schlichting, H.↗
An experimental study of the compressor rotor blade boundary layer
The three-dimensional turbulent boundary layer developing on a rotor blade of an axial flow compressor was measured using a miniature 'x' configuration hot-wire probe. The measurements were carried out at nine radial locations on both surfaces of the blade at various chordwise locations. The data derived includes streamwise and radial mean velocities and turbulence intensities. The validity of conventional velocity profiles such as the 'power law profile' for the streamwise profile, and Mager and Eichelbrenner's for the radial profile, is examined. A modification to Mager's crossflow profile is proposed. Away from the blade tip, the streamwise component of the blade boundary layer seems to be mainly influenced by the streamwise pressure gradient. Near the tip of the blade, the behavior of the blade boundary layer is affected by the tip leakage flow and the annulus wall boundary layer. The 'tangential blockage' due to the blade boundary layer is derived from the data. The profile losses are found to be less than that of an equivalent cascade, except in the tip region of the blade.
Pouagare, M.↗
Integration of satellite and surface data using a radiative-convective oceanic boundary-layer model
A mixing-line boundary-layer model is used to retrieve cloud-top height from satellite-derived cloud-top temperatures, using 700-hPa National Meteorological Center (NMC) analyses and the Comprehensive Ocean and Atmosphere Data Set (COADS) surface data as supporting datasets. Results are compared with the fixed-lapse-rate method of retrieving boundary-layer depth from sea surface temperatures (SST) and cloud-top temperatures. A radiative-convective equilibrium boundary-layer model is used to retrieve boundary-layer structure given SST and surface wind, satellite cloud-top temperatures and cloud fraction, and the 700-hPa NMC thermodynamic analyses. Good agreement is found between the COADS data and the model solutions for low-level temperature and moisture. This suggests that equilibrium boundary-layer models may be of use over remote oceans in the retrieval of boundary-layer structure.
Betts, Alan K.↗
Mechanics of chemical species transport in the marine atmospheric boundary layer
Marine atmospheric boundary layer (MABL) drafts are modeled as steady-state plumes using the approach proposed by Telford (1966), and the model response to varying forcing and boundary conditions is examined. Since most of the chemical species are passive tracers within the MABL, variations in the implied fluxes are determined as a combination of the boundary conditions for the chemical species and the thermodynamic forcing implied by the stability and thermal boundary conditions.
Hanson, Howard P.↗