Search NASA⌕ Search

SEARCH · Search NASA

Results for “Brønsted Acids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Influence of Domain Size and Support Composition on the Reducibility of SiO 2 and TiO 2 Supported Tungsten Oxide Clusters

Supported tungsten oxides are widely used in a variety of catalytic reactions. Depending on the support, the cluster size, oxidation state, reducibility and speciation of the tungsten oxides can widely differ. When promoted with a platinum group metal, the resulting spillover of hydrogen may facilitate the reduction of supported tungsten oxide species, depending on the support. High resolution scanning transmission electron microscopy imaging showed nanometer scale WO x clusters were synthesized on SiO 2 whereas highly dispersed species were formed on TiO 2 . Results from H 2 -temperature-programmed reduction showed the presence of Pd lowered the initial reduction temperature of SiO 2 -supported WO x species but interestingly did not affect that of TiO 2 -supported WO x . X-ray photoelectron and absorption spectroscopies showed the W atoms in SiO 2 -supported WO x species reduce from a +6 oxidation state to primarily +5 after thermal treatment in 5% H 2 , while the fraction of W in the +5 oxidation state was relatively unaffected by reduction treatment of TiO 2 -supported WO x . The unusual behavior of TiO 2 -supported WO x was explained by quantum chemical calculations that reveal the lack of change in the oxidation state of W is attributed to charge delocalization on the surface atoms of the titania support, which does not occur on silica. Moreover, modeling results at <600 K in the presence of H 2 suggest the formation of Brønsted acid sites, and the absence of Lewis acid sites, on larger aggregates of WO x on silica and all cluster sizes on titania. These results provide experimental and theoretical insights into the nature of supported tungsten oxide clusters under conditions relevant to various catalytic reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Role of Metal–Organic Framework Topology on Thermodynamics of Polyoxometalate Encapsulation

Polyoxometalates (POMs) are discrete anionic clusters whose rich redox properties, strong Brønsted acidity, and high availability of active sites poise them as potent catalysts for oxidation reactions. Here, metal–organic frameworks (MOFs) have emerged as tunable, porous platforms to immobilize POMs, thus increasing their solution stability and catalytic activity. While POM@MOF composite materials have been widely used for a variety of applications, little is known about the thermodynamics of the encapsulation process. Here, we utilize an up-and-coming technique in the field of heterogeneous materials, isothermal titration calorimetry (ITC), to obtain full thermodynamic profiles (ΔH, ΔS, ΔG, K a ) of POM binding. Six different 8-connected hexanuclear Zr-MOFs were investigated to determine the impact of MOF topology (csq, scu, the) on POM encapsulation thermodynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Understanding the Correlation between Ga Speciation and Propane Dehydrogenation Activity on Ga/H-ZSM-5 Catalysts

H-ZSM-5 zeolite-supported Ga (Ga/H-ZSM-5) has been considered as a selective catalyst for nonoxidative propane dehydrogenation (PDH) for decades; however, the reaction mechanism remains a topic of considerable discussion. In particular, the correlation between various Ga species present on the catalyst at the reaction conditions and the PDH activity has yet to be established. In this work, intrinsic PDH rates and activation energies were determined on Ga + –H + pair sites and isolated Ga + sites on Ga/H-ZSM-5 samples with a wide range of Si/Al and Ga/Al ratios. Here, the turnover frequency on Ga + –H + pair sites in the PDH is higher than that of isolated Ga + sites by a factor of ~15. Experimental measurements combined with a dual-site model show the activation energy in the PDH on the Ga + –H + pair sites and isolated Ga + sites to be 90.8 ± 1.5 and 117 ± 4.7 kJ·mol –1 , respectively. These results demonstrate that Ga+–H+ pair sites are much more active in the PDH than isolated Ga + sites. The activation energy of GaH x decomposition to form H 2 was determined to be 40–60 kJ·mol –1 higher than that of the PDH on Ga species, suggesting that the GaH x decomposition is unlikely to be part of the PDH mechanism. Although both Brønsted acid and Ga sites interact with propane, Fourier transform infrared spectroscopy results provide strong evidence suggesting that the alkyl mechanism is more likely in the PDH on Ga/H-ZSM-5 catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

An Iron-Based Dehydration Catalyst for Selective Formation of Styrene

In this work, we report the synthesis and crystal structure of [Fe(OTf) 2 (FOX)] (A). This robust iron(II) complex was successfully applied as a homogeneous catalyst for the dehydration of 1-phenylethanol to styrene. Even at low catalyst loadings and moderate reaction temperatures, A showed a high catalytic efficiency. It was found to selectively activate the benzylic alcohol group of 1-phenylethanol. This is challenging since the vinyl system of styrene is highly reactive. In contrast to most of the other dehydration processes, the use of a Brønsted acid was not necessary. Furthermore, mechanistic insights into this E 1 -type transformation and its competing S N 1-type side reactions are reported. [Fe( c HexOH)(OTf)(FOX)][OTf] (B), an alcohol adduct of A, [Fe(H 2 O) 2 (FOX)][OTf] 2 (C), the completely hydrated derivative of A, and [μ-O{Fe(OTf)(FOX)} 2 ][OTf] 2 (D), a dinuclear oxidation product of A, were also characterized and are discussed.

02 PETROLEUM↗
DOE OSTI2023

Rapid Polyolefin Plastic Hydrogenolysis Mediated by Single-Site Heterogeneous Electrophilic/Cationic Organo-group IV Catalysts

A homologous series of cationic electrophilic group IV metal hydrides (M = Ti, Zr, Hf) created by chemisorption of the corresponding MNp 4 precursors on highly Brønsted acidic sulfated alumina (AlS) to yield loosely coordinated surface AlS/MNp 2 (Np = neopentyl) species are systematically characterized by ICP, EXAFS/XANES, DRIFTS, and solid-state high-resolution multidimensional NMR spectroscopy (SSNMR), as well as by energy span DFT computation. With effective stirring, these complexes readily undergo reaction with H 2 to yield AlS/M(alkyl)H species, which are highly active for the hydrogenolysis of diverse commercial polyethylenes, α-olefin-ethylene copolymers, isotactic polypropylene, and postconsumer polyolefins including high-density polyethylenes, yielding medium and small linear and branched hydrocarbons at turnover frequencies as high as 36,300 h –1 at 200 °C/17 atm H 2 for M = Zr. For given polyolefin and reaction conditions, turnover frequencies scale approximately as M = Zr > Hf > Ti, whereas catalyst thermal stability scales approximately as M = Hf ≈ Zr > Ti, and these trends are qualitatively understandable from the DFT analysis. These catalytic results reveal that the AlS/Hf(R)H-mediated hydrogenolysis favors wax-like and liquid products, whereas the AlS/Zr(R)H-mediated hydrogenolysis can be tuned between gases and liquids. Finally, DFT analysis identifies β-alkyl elimination as the turnover-limiting C–C scission process, which is particularly facile in these cationic d 0 complexes but not so in the neutrally charged analogues.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ga + -Chabazite Zeolite: A Highly Selective Catalyst for Nonoxidative Propane Dehydrogenation

Ga-chabazite zeolites (Ga-CHA) have been found to efficiently catalyze propane dehydrogenation with high propylene selectivity (96%). In situ FTIR spectroscopy and pulse titrations are employed to determine that upon reduction, surface Ga 2 O 3 is reduced and diffuses into the zeolite pores, displacing the Brønsted acid sites (BAS) and forming extra-framework Ga + sites. This isolated Ga + site reacts reversibly with H 2 to form GaHx (2034 cm -1 ) with an enthalpy of formation of ~ -51.2 kJ·mol -1 , a result supported by Density functional theory (DFT) calculations. The initial C 3 H 6 dehydrogenation rates decrease rapidly (40%) during the first 100 min and then decline slowly afterward, while the C 3 H 6 selectivity is stable at ~ 96%. The reduction in the reaction rate is correlated with the formation of polycyclic aromatics inside the zeolite (using UV-vis spectroscopy) indicating that the accumulation of polycyclic aromatics is the main cause of the deactivation. The carbon species formed can be easily oxidized at 600 °C with complete recovery of the PDH catalytic properties. The correlations between GaH x vs. Ga/Al ratio, and PDH rates vs. Ga/Al ratio show that extra-framework Ga + is the active center catalyzing propane dehydrogenation. The higher reaction rate on Ga + than In + in CHA zeolites, by a factor of 43, is the result of differences in the stabilization of the transition state due to the higher stability of Ga 3+ vs. In 3+ . The uniformity of the Ga + sites in this material makes it an excellent model for the molecular understanding of metal cation exchanged hydrocarbon interactions in zeolites.

10 SYNTHETIC FUELS↗
DOE OSTI2025

CO Adsorbates Induced Framework-Associated Low-Valence Co δ+ Sites in Co-ZSM-5 for Ethane Dehydrogenation

The dynamic structural evolution of heterogeneous catalysts is a ubiquitous phenomenon that has attracted a lot of interest. Catalyst reconstruction can occur after appropriate pretreatment, resulting in more efficient active catalysts, which is an attractive but challenging issue. Here, we reveal a CO activation strategy that controls the microenvironment of the Co sites in the high-silica Co-ZSM-5 catalyst (denoted as 0.50Co-Z5(340)), resulting in three times higher initial conversion and superior regeneration durability in the ethane dehydrogenation reaction compared to the same catalyst without CO pretreatment. In situ spectroscopy and metadynamics simulations reveal that the Co 2+ sites in 0.50Co-Z5(340) dislodge from the framework and move toward the nearby Brønsted acid sites, forming framework-associated low-valence Co δ+ species. Mechanistic studies indicate that the Co δ+ species catalyze ethane C–H bond cleavage via an oxidative addition mechanism, and ethylene is produced simultaneously with H* coupling (direct pathway). The promoted C–H bond activation and facile ethylene desorption explain the superior ethane dehydrogenation performance of the herein CO preactivated 0.50Co-Z5(340) catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Intrinsically Bifunctional and Tunable Tungsten Carbide Catalysts Enable Efficient PVC-Compatible Polyolefin Hydrocracking

Hydrocracking is a promising route for the chemical recycling of polyolefins (PO), converting them into short hydrocarbons over bifunctional catalysts with metal sites for hydrogenation and dehydrogenation, and Brønsted acid sites (BAS) for isomerization and C–C bond cleavage. However, PO feedstocks containing polyvinyl chloride (PVC) can release chlorine (Cl) under reaction conditions, deactivating conventional noble metal/zeolite catalysts. Moreover, the lack of site intimacy and the presence of micropores within conventional catalysts create challenges around the transport of high-molecular-weight, sterically encumbered polymer intermediates. Here, in this study, we report tungsten carbides (W x C) as a novel type of bifunctional catalysts that address these challenges. W/W 2 C phases on W x C offer “metal” sites, and −OH on WO x species introduces BAS in close proximity. The “metal”:BAS ratio can be tuned through carburization temperature, leading to a volcano-shaped activity trend reflecting the requirement for metal–BAS balance. Kinetic data demonstrate that each PO chain undergoes sequential cleavage, while trends in cracking ideality and selectivity follow those in short-alkane hydrocracking. On the per-BAS basis, W x C is more efficient than conventional bifunctional catalysts by more than an order of magnitude, due to enhanced polymer transport. They maintain or show increased activity with 10 wt % PVC in the substrate. This work establishes transition-metal carbides as earth-abundant bifunctional catalysts with unique site proximity and heteroatom compatibility. These features, along with the broad structure space for rational tuning, make them promising options to tackle specific challenges that polymer feedstocks present in hydrocracking.

Nwachukwu, Uchenna C. [Univ. of Akron, OH (United ↗
DOE OSTI2026

Low-Temperature Pyrolysis of Aliphatic Polymers Using a Fluorinated Amorphous Silica–Alumina: Cooperative Reactivity between a Redox-Active Radical and an Aluminum Lewis Site

Fluorinated amorphous silica–alumina (F-ASA) prepared by the thermolysis of Krossing’s Al(OC(CF 3 ) 3 ) 3 (PhF) Lewis superacid supported on silica is a very reactive catalyst that promotes the pyrolysis (cracking) of aliphatic polymer melts to produce low molecular weight hyperbranched oils. Initial spectroscopic studies reported previously (Gao, J.; Perras, F. A.; Conley, M. P. J. Am. Chem. Soc . 2025 , 147, 18145–18154) showed that this material contains a distribution of four-, five-, and six-coordinate aluminum sites and a small amount of Brønsted acid sites, similar to typical amorphous silica–alumina materials that are far less reactive in the pyrolysis of aliphatic polymer melts. The objective of this study was to determine whether other active sites present in F-ASA could facilitate pyrolysis reactions. This study provides evidence for the presence of a redox-active silicon oxycarbide persistent radical ((≡Si) 3 C•) in F-ASA. Mims ENDOR EPR experiments show that (≡Si) 3 C• is located close to aluminum. Contacting F-ASA with thianthrene (Th) results in oxidation to form the [Th •+ ][F–ASA] ion-pair, while reactions with 1-hydroxy-2,2,6,6-tetramethylpiperidine (TEMPOH) result in H atom transfer to form TEMPO radical and F-ASA-H containing a mildly acidic (≡Si) 3 C–H. Poisoning studies show that both Lewis acidity and (≡Si) 3 C• are required for polymer pyrolysis reactivity. Finally, we propose that F-ASA promotes the formation of alkyl radicals in polymer melts, which are key intermediates in the thermal pyrolysis reactions of aliphatic polymers, involving the cooperative reactivity of both the Lewis acid and (≡Si) 3 C•.

aluminum↗
DOE OSTI2026

Controlled Placement of Trivalent Heteroatoms in MFI Zeolite Frameworks Using Structure-Directing Agents

MFI zeolites contain distinct confining pore environments, either smaller (∼0.55 nm) channels or larger (∼0.70 nm) intersections. The substitution of trivalent heteroatoms generates Brønsted acid sites of varying acid strength, which, together with their location within different pore environments, dictates the stability of transition states via electrostatic (ion-pair) and van der Waals interactions. Here, we report that structure-directing agents (SDAs) that control Al 3+ substitutional patterns during MFI crystallization analogously position other trivalent heteroatoms (Ga 3+ , Fe 3+ , B 3+ ), altering the distribution of acid sites between channels and intersections, as probed by low-temperature (403 K) toluene methylation kinetics. Heteroatom-substituted MFI crystallized with tetrapropylammonium result in low selectivity toward p-xylene (<30%), while those crystallized using (co-)SDAs containing peripheral hydrogen-bonding groups (e.g., ethylenediamine) show high p-xylene selectivity (∼80%). These selectivities are consistent with DFT-calculated Gibbs free energy barriers for intersection-dominant and channel-dominant active site distributions, respectively. Transition states to form each xylene isomer are similar in size and charge; thus, their rate constants decrease with acid strength similarly, causing isomer selectivity to depend strongly on confinement but not on acid strength. These generalizable synthetic strategies enable independently controlling acid site strength and location in MFI zeolites and, in turn, catalytic rates and selectivities.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Control of zeolite microenvironment for propene synthesis from methanol

Optimising the balance between propene selectivity, propene/ethene ratio and catalytic stability and unravelling the explicit mechanism on formation of the first carbon–carbon bond are challenging goals of great importance in state-of-the-art methanol-to-olefin (MTO) research. We report a strategy to finely control the nature of active sites within the pores of commercial MFI-zeolites by incorporating tantalum(V) and aluminium(III) centres into the framework. The resultant TaAlS-1 zeolite exhibits simultaneously remarkable propene selectivity (51%), propene/ethene ratio (8.3) and catalytic stability (>50 h) at full methanol conversion. In situ synchrotron X-ray powder diffraction, X-ray absorption spectroscopy and inelastic neutron scattering coupled with DFT calculations reveal that the first carbon–carbon bond is formed between an activated methanol molecule and a trimethyloxonium intermediate. The unprecedented cooperativity between tantalum(V) and Brønsted acid sites creates an optimal microenvironment for efficient conversion of methanol and thus greatly promotes the application of zeolites in the sustainable manufacturing of light olefins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Rapid atom-efficient polyolefin plastics hydrogenolysis mediated by a well-defined single-site electrophilic/cationic organo-zirconium catalyst

Polyolefins comprise a major fraction of single-use plastics, yet their catalytic deconstruction/recycling has proven challenging due to their inert saturated hydrocarbon connectivities. Here a very electrophilic, formally cationic earth-abundant single-site organozirconium catalyst chemisorbed on a highly Brønsted acidic sulfated alumina support and characterized by a broad array of experimental and theoretical techniques, is shown to mediate the rapid hydrogenolytic cleavage of molecular and macromolecular saturated hydrocarbons under mild conditions, with catalytic onset as low as 90 °C/0.5 atm H 2 with 0.02 mol% catalyst loading. For polyethylene, quantitative hydrogenolysis to light hydrocarbons proceeds within 48 min with an activity of > 4000 mol(CH 2 units)·mol(Zr) –1 ·h –1 at 200 °C/2 atm H 2 pressure. Under similar solventless conditions, polyethylene-co–1-octene, isotactic polypropylene, and a post-consumer food container cap are rapidly hydrogenolyzed to low molecular mass hydrocarbons. Regarding mechanism, theory and experiment identify a turnover-limiting C-C scission pathway involving ß-alkyl transfer rather than the more common σ-bond metathesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Confining platinum clusters in indium-modified ZSM-5 zeolite to promote propane dehydrogenation

Designing highly active and stable catalytic sites is often challenging due to the complex synthesis procedure and the agglomeration of active sites during high-temperature reactions. Here, we report a facile two-step method to synthesize Pt clusters confined by In-modified ZSM-5 zeolite. In-situ characterization confirms that In is located at the extra-framework position of ZSM-5 as In + , and the Pt clusters are stabilized by the In-ZSM-5 zeolite. The resulting Pt clusters confined in In-ZSM-5 show excellent propane conversion, propylene selectivity, and catalytic stability, outperforming monometallic Pt, In, and bimetallic PtIn alloys. The incorporation of In + in ZSM-5 neutralizes Brønsted acid sites to inhibit side reactions, as well as tunes the electronic properties of Pt clusters to facilitate propane activation and propylene desorption. The strategy of combining precious metal clusters with metal cation-exchanged zeolites opens the avenue to develop stable heterogeneous catalysts for other reaction systems.

58 GEOSCIENCES↗
DOE OSTI2025

Stable single-site organonickel catalyst preferentially hydrogenolyses branched polyolefin C–C bonds

Current methods of processing accumulated polyolefin waste typically require harsh conditions, precious metals or high metal loadings to achieve appreciable activities. Here, in this work, we examined supported, single-site organonickel catalysts for polyolefin upcycling. Chemisorption of Ni(COD) 2 (COD, 1,5-cyclooctadiene) onto Brønsted acidic sulfated alumina (AlS) yields a highly electrophilic Ni(I) precatalyst, AlS/Ni(COD) 2 , which is converted under H 2 to the active AlS/Ni II H catalyst. This single-site system exhibits unique hydrogenolysis selectivity that favours cleaving branched polyolefin C–C linkages, enabling the hydrogenolytic separation of polyethylene and isotactic polypropylene (iPP) mixtures. Moreover, AlS/Ni II H remains highly selective and active for hydrogenolysis of iPP admixed with polyvinyl chloride, and the spent catalyst can be repeatedly regenerated by AlEt3 treatment. Experimental mechanistic analysis and density functional theory modelling reveal a turnover-limiting C–C scission pathway featuring β-alkyl transfer and strong olefin binding. These results highlight the potential of nickel-based systems for the selective upcycling of complex plastic waste streams.

green chemistry↗
DOE OSTI2023

Elemental zoning enhances mass transport in zeolite catalysts for methanol to hydrocarbons

Mass transport limitations in zeolite catalysts pose major hurdles for their optimal performance in diverse chemical reactions. Most approaches to reduce these restrictions focus on the synthesis of either hierarchical or nanosized zeolites. Here we demonstrate that the existence of a siliceous, catalytically inactive exterior rim on ZSM-5 particles dramatically reduces the diffusion limitations, which leads to an enhanced catalyst lifetime for the methanol-to-hydrocarbon reaction. In this study, our findings reveal that binary inorganic and organic structure-directing agents enable a one-pot synthesis of Si-zoned ZSM-5 catalysts with diffusion properties that are characteristic of particles with a much smaller size. Operando ultraviolet–visible light diffuse reflectance spectroscopy reveals a marked reduction in external coking among Si-zoned samples. Molecular dynamics simulations to assess the diffusion of methanol and benzene in siliceous pores and in those with Brønsted acids reveal substantially reduced transport limitations in zoned regions, consistent with the improved catalyst activity of Si-zoned zeolites relative to that of ZSM-5 with a homogeneous acid-site distribution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Aromatic heterobicycle-fused porphyrins: impact on aromaticity and excited state electron transfer leading to long-lived charge separation

A new synthetic method to fuse benzo[4,5]imidazo[2,1-a]isoindole to the porphyrin periphery at the β,β-positions has been developed, and its impact on the aromaticity and electronic structures is investigated. Reactivity investigation of the fused benzoimidazo-isoindole component reveals fluorescence quenching of a zinc porphyrin (AMIm-2) upon treatment with a Brønsted acid. The reaction of the zinc porphyrin (AMIm-2) with methyl iodide initiated a new organic transformation, resulting in the ring-opening of isoindole with the formation of an aldehyde and dimethylation of the benzoimidazo component. The fused benzoimidazo-isoindole component acted as a good ligand to bind platinum(II), forming novel homobimetallic and heterobimetallic porphyrin complexes. The fusion of benzoimidazo-isoindole on the porphyrin ring resulted in bathochromically shifted absorptions and emissions, reflecting the extended conjugation of the porphyrin π-system. Time-resolved emission and transient absorption spectroscopy revealed stable excited state species of the benzoimidazo-isoindole fused porphyrins. Zinc porphyrin AMIm-2 promoted excited state electron transfer upon coordinating with an electron acceptor, C60, generating a long-lived charge-separated state, in the order of 37.4 μs. The formation of the exceptionally long-lived charge-separated state is attributed to the involvement of both singlet and triplet excited states of AMIm-2, which is rarely reported in porphyrins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Controlling the toxicity of biomass-derived difunctional molecules as potential pharmaceutical ingredients for specific activity toward microorganisms and mammalian cells

A biomass-derived difuran compound, denoted as HAH (HMF–acetone–HMF), synthesized by aldol-condensation of 5-hydroxyfurfural (HMF) and acetone, can be partially hydrogenated to provide an electron-rich difuran compound (PHAH) for Diels–Alder reactions with maleimide derivatives. The nitrogen (N) site in the maleimide can be substituted by imidation with amine-containing compounds to control the hydrophobicity of the maleimide moiety in adducts of furans and maleimide by Diels–Alder reaction, denoted as norcantharimides (Diels–Alder adducts). The structural effects on the toxicity of various biomass-derived small molecules synthesized in this manner to regulate biological processes, defined as low molecular weight (≤1000 g mol -1 ) organic compounds, were investigated against diverse microbial and mammalian cell types. The biological toxicity increased when hydrophobic N-substitutions and C[double bond, length as m-dash]C bonds were introduced into the molecular structure. Among the synthesized norcantharamide derivatives, some compounds demonstrated pH-dependent toxicities against specific cell types. Reaction kinetics analyses of the norcantharimides in biological conditions suggest that this pH-dependent toxicity of norcantharimides could arise from retro Diels–Alder reactions in the presence of a Brønsted acid that catalyzes the release of an N-substituted maleimide, which has higher toxicity against fungal cells than the toxicity of the Diels–Alder adduct. These synthetic approaches can be used to design biologically-active small molecules that exhibit selective toxicity against various cell types (e.g., fungal, cancer cells) and provide a sustainable platform for production of prodrugs that could actively or passively affect the viability of infectious cells.

60 APPLIED LIFE SCIENCES↗