Search NASA⌕ Search

SEARCH · Search NASA

Results for “CAPP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Estimation of post-burst vibration-induced fuel dispersal thresholds following LOCA-simulant testing

The nuclear industry intends to increase burnup past the regulatory limit of 62 GWd/MTU, and to be successful, the dispersal behavior of fragmented high-burnup fuel during loss-of-coolant accidents must be better understood. Part of this behavior is fuel fragmentation, relocation, and dispersal. This work reports on testing concerning the dispersal of fuel from rods following burst and pressure blowdown through the burst. The Fuel Relocation Induced by Accident Recovery (FRIAR) system was used to examine surrogate material and pre-burst cladding specimens to evaluate the effects of vibrational loading, mixture composition, and burst size on post-burst dispersal. Vibrational loading resulted in maximum dispersal around 15 Hz when the loading was performed with peak-to-peak oscillation amplitudes at 0.5 and 1 mm. Here, under this aggressive vibrational loading, dispersal was found to become significant as burst widths increased to approximately 5 mm and larger. However, below 4 mm widths, little material dispersed out of the opening, even at 1 mm amplitudes and for more dispersive mixtures (smaller average fragments). At and above 7 mm widths, dispersal was rapid for all mixtures. Finally, dispersal in the threshold region (4–5 mm wide bursts) strongly depended on the mixture. For mixtures with large fragments, dispersal was minimized to a few fragments, as the large fragments proved to be effective at minimizing dispersal. Conversely, mixtures with smaller fragments showed increased dispersal in this region.

Burst geometry↗
DOE OSTI2026

Beyond interpolation: Physics-inspired gating transformers for extrapolating irradiation conditions to novel nuclear fuels

The qualification of advanced nuclear fuels relies on irradiation experiments in test reactors that emulate commercial conditions. Designing these tests requires accurate prediction of key irradiation quantities, particularly heat generation rate and burnup, yet obtaining them typically involves computationally expensive multi-step simulation workflows. We propose a physics-inspired gating transformer (PIGT) that integrates an inverse-square, distance-based attenuation into the encoder representation to bias attention toward physically relevant spatial relationships while retaining data-driven flexibility. Using MiniFuel irradiation data from the High Flux Isotope Reactor at Oak Ridge National Laboratory, we benchmark against ensemble methods, feedforward and recurrent networks, convolutional models, and standard transformers. While baseline models perform well under interpolation, they exhibit a pronounced generalization gap when evaluated on fuels not included in the training set. The proposed model consistently improves extrapolative accuracy and stability, yielding the strongest performance on unseen fuel configurations. These results indicate that a lightweight physics structure embedded within attention mechanisms can substantially improve robustness, enabling more reliable surrogate predictions to accelerate the design of nuclear fuel irradiation experiments.

Fuel qualification↗
DOE OSTI2020

Integration of ecosystem science into radioecology: A consensus perspective

In the Fall of 2016 a workshop was held which brought together over 50 scientists from the ecological and radiological fields to discuss feasibility and challenges of reintegrating ecosystem science into radioecology. There is a growing desire to incorporate attributes of ecosystem science into radiological risk assessment and radioecological research more generally, fueled by recent advances in quantification of emergent ecosystem attributes and the desire to accurately reflect impacts of radiological stressors upon ecosystem function. This work is a synthesis of the discussions and consensus of the workshop participant's responses to three primary questions, which were: 1) How can ecosystem science support radiological risk assessment? 2) What ecosystem level endpoints potentially could be used for radiological risk assessment? and 3) What inference strategies and associated methods would be most appropriate to assess the effects of radionuclides on ecosystem structure and function? The consensus of the participants was that ecosystem science can and should support radiological risk assessment through the incorporation of quantitative metrics that reflect ecosystem functions which are sensitive to radiological contaminants. The participants also agreed that many such endpoints exit or are thought to exit and while many are used in ecological risk assessment currently, additional data need to be collected that link the causal mechanisms of radiological exposure to these endpoints. Finally, the participants agreed that radiological risk assessments must be designed and informed by rigorous statistical frameworks capable of revealing the causal inference tying radiological exposure to the endpoints selected for measurement.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Global Patterns and Controls of Nutrient Immobilization on Decomposing Cellulose in Riverine Ecosystems

Microbes play a critical role in plant litter decomposition and influence the fate of carbon in rivers and riparian zones. When decomposing low-nutrient plant litter, microbes acquire nitrogen (N) and phosphorus (P) from the environment (i.e., nutrient immobilization), and this process is potentially sensitive to nutrient loading and changing climate. Nonetheless, environmental controls on immobilization are poorly understood because rates are also influenced by plant litter chemistry, which is coupled to the same environmental factors. Here we used a standardized, low-nutrient organic matter substrate (cotton strips) to quantify nutrient immobilization at 100 paired stream and riparian sites representing 11 biomes worldwide. Immobilization rates varied by three orders of magnitude, were greater in rivers than riparian zones, and were strongly correlated to decomposition rates. In rivers, P immobilization rates were controlled by surface water phosphate concentrations, but N immobilization rates were not related to inorganic N. The N:P of immobilized nutrients was tightly constrained to a molar ratio of 10:1 despite wide variation in surface water N:P. Immobilization rates were temperature-dependent in riparian zones but not related to temperature in rivers. However, in rivers nutrient supply ultimately controlled whether microbes could achieve the maximum expected decomposition rate at a given temperature. Collectively, we demonstrated that exogenous nutrient supply and immobilization are critical control points for decomposition of organic matter.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Role of Accelerated Burnup Irradiation Testing in Support of Accelerated Fuel Qualification

Accelerated fuel qualification has gained attention as a means to reduce the time needed to realize new nuclear fuel concepts and expand the operating windows of existing fuel forms. A key component of this approach is accelerated burnup irradiation testing. Although the concept of accelerated burnup has been familiar to the community for many decades, the specifics about how the increasing fission rate may be used as a qualification tool have not yet been elucidated. The present work provides a vision of how accelerated fission rate testing can enable accelerated fuel qualification. Technology readiness levels (TRLs) are reintroduced to demarcate the stages of traditional fuel qualification, and accelerated fuel qualification is presented in this context. The critical steps needed to achieve each TRL are reframed within the context of modern nuclear materials research and development, as revolutionary fuel concepts are more common than previous eras. The practical impacts of accelerated fuel qualification approaches as applied to contemporary fuel qualification efforts are illustrated. Examples are given to illustrate how accelerated burnup irradiations are being used currently and could be applied in the future to support qualification and licensure. Finally, outstanding challenges in the application of accelerated burnup methods to nuclear fuel qualification are summarized, with priority placed on understanding how fission rate impacts diffusion, microstructure evolution, and other critical mechanisms that dictate fuel performance.

Accelerated fuel qualification↗
DOE OSTI2025

A Standardized Analysis Process Using Digital Image Correlation to Calculate In Situ Cladding Strain from Modified Burst Tests for Fuel Performance Code Validation

Historical data collection on nuclear fuel cladding materials has focused on generating a statistically significant amount of data to assess the material and its failure behavior. Furthermore, data generated to support material model and failure criteria development were previously posttest evaluations, so a large number of tests was required to gain new understanding. A way to expedite this process is to develop techniques capable of generating large, high-fidelity data sets from a single test with lower uncertainty or quantified uncertainty. One such example of this approach is Oak Ridge National Laboratory’s use of modified burst tests (MBTs) to analyze the mechanical behavior and failure conditions of cladding during a simulated reactivity-initiated accident (RIA). Each test incorporates digital image correlation (DIC) analysis techniques that are used to assess the accumulated strain in situ, as well as eventual cladding failure. This work has been fruitful in defining strain-to-failure conditions for materials like silicon carbide (SiC) fiber–reinforced/SiC matrix composite tubes (SiC/SiC), iron-chromium-aluminum (FeCrAl) alloy tubes, and chromium-coated Zircaloy-4 tubes. However, there are numerous DIC software available, including open-source and proprietary software. The different DIC software use various algorithms to process images and calculate displacement values. Using these different software and algorithms can lead to varying results, and perhaps larger-than-expected uncertainties. In the present study, previously published MBT data encompassing a variety of test conditions were reanalyzed with two different DIC software to assess the variance in the calculated strain results. The data consisted of SiC/SiC, FeCrAl, and chromium-coated Zircaloy-4 tubes. Plots of the calculated strains during the transient revealed good agreement between the two DIC software. The average root-mean-square errors between the two software was 0.20% strain, which is slightly larger than a previously reported error value for these tests. In conclusion, this variance in results is low enough that this analysis method can be used for code validation.

Reactivity-initiated accident↗
DOE OSTI2025

An Initial Microstructurally Informed Model of High Burnup Structure Formation in UO 2 Fuel

The microstructure of a UO 2 fuel pellet changes as burnup increases, impacting fuel performance. Predicting and characterizing high burnup structure (HBS) and dark zone formation is a key part of supporting burnup limit extensions for light water reactors. This paper describes a model developed through fitting radially resolved pellet data obtained from recently published microstructural characterization data. The model predicts grain size and grain character, in addition to pore density and size, with fitting dependencies on power history variables. Separately fitting power history variables to microstructural parameters allows for insight into the underlying physical phenomena for future model development. Additionally, experimental data have been correlated to an HBS fraction to facilitate the development of a model capable of predicting a total fuel restructured fraction at the engineering scale. In conclusion, this two-step approach provides a coupling from reactor power history to microstructural data to fractional HBS and creates a basis to model HBS-dependent parameters in a fuel performance code.

High burnup structure↗
DOE OSTI2022

Strong Coulomb coupling influences ion and neutral temperatures in atmospheric pressure plasmas

Molecular dynamics simulations are used to model ion and neutral temperature evolution in partially-ionized atmospheric pressure plasma at different ionization fractions. Results show that ion–ion interactions are strongly coupled at ionization fractions as low as 10 –5 and that the temperature evolution is influenced by effects associated with the strong coupling. Specifically, disorder-induced heating is found to rapidly heat ions on a timescale of the ion plasma period (~10 s ps) after an ionization pulse. This is followed by the collisional relaxation of ions and neutrals, which cools ions and heats neutrals on a longer (~ns) timescale. Slight heating then occurs over a much longer (~100 s ns) timescale due to ion-neutral three-body recombination. An analytic model of the temperature evolution is developed that agrees with the simulation results. Finally, a conclusion is that strong coupling effects are important in atmospheric pressure plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Influence of strong Coulomb coupling on diffusion in atmospheric pressure plasmas

Ion diffusion in atmospheric pressure plasmas is examined and particular attention is paid to the fact that ion–ion interactions can be influenced by strong Coulomb coupling. Three regimes are identified. At low ionization fractions (x i ≲ 10 —6 ), standard weakly correlated ion-neutral interactions set the diffusion rate. At moderate ionization fractions (10 —6 ≲ x i ≲ 10 —2 ) there is a transition from ion-neutral to ion–ion collisions setting the diffusion rate. In this regime, the effect of strong Coulomb coupling in ion–ion collisions is accounted for by applying the mean force kinetic theory. Since both ion-neutral and ion–ion interactions contribute a comparable amount to the total diffusion rate, models (such as particle-in-cell or fluid) must account for both contributions. At high ionization fractions (x i ≳ 10 —2 ), strongly correlated ion–ion collisions dominate and the plasma is heated substantially by a disorder-induced heating (DIH) process associated with strong correlations. The temperature increase due to DIH strongly influences the ion diffusion rate. This effect becomes even more important, and occurs at lower ionization fractions, as the pressure increases above atmospheric pressure. In addition to ion diffusion, DIH affects the neutral gas temperature, therefore influencing the neutral diffusion rate. Model predictions are tested using molecular dynamics simulations, which included a Monte Carlo collision routine to simulate the effect of ion-neutral collisions at the lowest ionization fractions. The model and simulations show good agreement over a broad range of ionization fractions. Importantly, the results provide a model for ion diffusion, on a wide range of ionization fractions and pressures, solely considering the elastic contribution to the diffusion coefficient—as an illustration of how strong Coulomb coupling influences diffusion processes in general.

fast neutral gas heating↗
DOE OSTI2024

Disorder-induced heating as a mechanism for fast neutral gas heating in atmospheric pressure plasmas

Abstract Recent findings suggest that ions are strongly correlated in atmospheric pressure plasmas if the ionization fraction is sufficiently high ( ≳ 10 − 5 ). A consequence is that ionization causes disorder-induced heating (DIH), which triggers a significant rise in ion temperature on a picosecond timescale. This is followed by a rise in the neutral gas temperature on a longer timescale of up to nanoseconds due to ion–neutral temperature relaxation. The sequence of DIH and ion–neutral temperature relaxation suggests a new mechanism for ultrafast neutral gas heating. Previous work considered only the case of an instantaneous ionization pulse, whereas the ionization pulse extends over nanoseconds in many experiments. Here, molecular dynamics simulations are used to analyze the evolution of ion and neutral gas temperatures for a gradual ionization over several nanoseconds. The results are compared with published experimental results from a nanosecond pulsed discharge, showing good agreement with a measurement of fast neutral gas heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

When should PIC simulations be applied to atmospheric pressure plasmas? Impact of correlation heating

Abstract Molecular dynamics simulations are used to test when the particle-in-cell (PIC) method applies to atmospheric pressure plasmas. It is found that PIC applies only when the plasma density and macroparticle weight are sufficiently small because of two effects associated with correlation heating. The first is the physical effect of disorder-induced heating (DIH). This occurs if the plasma density is large enough that a species (typically ions) is strongly correlated in the sense that the Coulomb coupling parameter exceeds one. In this situation, DIH causes ions to rapidly heat following ionization. PIC is not well suited to capture DIH because doing so requires using a macroparticle weight of one and a grid that well resolves the physical interparticle spacing. These criteria render PIC intractable for macroscale domains. The second effect is a numerical error due to artificial correlation heating (ACH). ACH is like DIH in that it is caused by the Coulomb repulsion between particles, but differs in that it is a numerical effect caused by a macroparticle weight larger than one. Like DIH, it is associated with strong correlations. However, here the macroparticle coupling strength is found to scale as Γ w 2 / 3 , where Γ is the physical coupling strength and w is the macroparticle weight. So even if the physical coupling strength of a species is small, as is expected for electrons in atmospheric pressure plasmas, a sufficiently large macroparticle weight can cause the macroparticles to be strongly coupled and therefore heat due to ACH. Furthermore, it is shown that simulations in reduced dimensions exacerbate these issues.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Disorder-induced heating in molecular atmospheric pressure plasmas

Abstract Recent work has shown that ions are strongly coupled in atmospheric pressure plasmas when the ionization fraction is sufficiently large, leading to a temperature increase from disorder-induced heating (DIH) that is not accounted for in standard modelling techniques. Here, we extend this study to molecular plasmas. A main finding is that the energy gained by ions in DIH gets spread over both translational and rotational degrees of freedom on a nanosecond timescale, causing the final ion and neutral gas temperatures to be lower in the molecular case than in the atomic case. A model is developed for the equilibrium temperature that agrees well with molecular dynamics simulations. The model and simulations are also applied to pressures up to ten atmospheres. We conclude that DIH is a significant and predictable phenomena in molecular atmospheric pressure plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Embedded Systems for Intelligent Vehicle Research

Connected and automated vehicles are becoming more and more popular. Research and development in these fields will require new and unique test environments and strategies. Several things can be learned from prior history with specialized vehicle data bus applications. Data bus development and testing techniques for three real-world car and heavy truck vehicle data bus projects are presented in this paper, with an emphasis on hardware-in-the-loop system integration testing.

Barker, Alan↗
DOE OSTI2025

Surface Texture of Macroplastic Pollution in Streams Alters the Physical Structure and Diversity of Biofilm Communities

ABSTRACT Biofilms can develop on nearly any surface, and in aquatic ecosystems they are essential components of biogeochemical cycles and food webs. Plastic waste in waterways is a new type of surface for biofilm colonisation. To analyse the influence of plastic pollution on the development and diversity of microbial freshwater biofilms that colonised them, we incubated 388 cm 2 veneers of high‐density polyethylene (HDPE) with two veneer textures, smooth and rough, and tulip tree wood ( Liriodendron tulipifera ), in three rural headwater streams at the Savannah River Site (Aiken, SC, USA). We collected biofilms from veneers after 14, 28 and 56 days of incubation and analysed 16S rRNA genes and biofilm properties. We found that plastic negatively affected species richness of biofilms compared with wood, but that evenness was greatest on rough textured HDPE. Beta diversity was primarily influenced by stream site. Beta diversity differed more between wood and plastic veneers than with plastic surface texture and became more different over time. Wood had nine times more biomass than rough HDPE and 40 times more biomass than smooth HDPE. Given the projected increase of macroplastic pollution in aquatic ecosystems, our findings emphasise the need to further understand its effects on biofilm characteristics.

Lopez Avila, Fabiola [Odum School of Ecology Unive↗
DOE OSTI2019

Global patterns and drivers of ecosystem functioning in rivers and riparian zones

River ecosystems receive and process vast quantities of terrestrial organic carbon, the fate of which depends strongly on microbial activity. Variation in and controls of processing rates, however, are poorly characterized at the global scale. In response, we used a peer-sourced research network and a highly standardized carbon processing assay to conduct a global-scale field experiment in greater than 1000 river and riparian sites. We found that Earth’s biomes have distinct carbon processing signatures. Slow processing is evident across latitudes, whereas rapid rates are restricted to lower latitudes. Both the mean rate and variability decline with latitude, suggesting temperature constraints toward the poles and greater roles for other environmental drivers (e.g., nutrient loading) toward the equator. These results and data set the stage for unprecedented “next-generation biomonitoring” by establishing baselines to help quantify environmental impacts to the functioning of ecosystems at a global scale.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Human activities shape global patterns of decomposition rates in rivers

Rivers and streams contribute to global carbon cycling by decomposing immense quantities of terrestrial plant matter. However, decomposition rates are highly variable and large-scale patterns and drivers of this process remain poorly understood. Using a cellulose-based assay to reflect the primary constituent of plant detritus, we generated a predictive model (81% variance explained) for cellulose decomposition rates across 514 globally distributed streams. A large number of variables were important for predicting decomposition, highlighting the complexity of this process at the global scale. Predicted cellulose decomposition rates, when combined with genus-level litter quality attributes, explain published leaf litter decomposition rates with high accuracy (70% variance explained). Finally, our global map provides estimates of rates across vast understudied areas of Earth and reveals rapid decomposition across continental-scale areas dominated by human activities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

CHAI and RAJA Extensions

CHAI and RAJA provide an excellent base on which to build portable codes. CARE expands that functionality, adding new features such as loop fusion capability and a portable interface for many numerical algorithms. It provides all the basics for anyone wanting to write portable code.

ROBINSON, PeterB↗
DOE OSTI2017

Axom

The Axom library consists of n collection of software components that provide core computer science infrastructure capabilities that can be shared by diverse high performance computing (HPC) applications. The current set of capabilities that Axom provides includes: Customizable support for error/warning and diagnostic message reporting and coordination among components of integrated applications (e.g., physics packages, libraries, etc.); Scalable parallel aggregation and filtering of message logging; In memory datastore for hierarchical, mesh-aware simulation data. The datastore supports data description, allocation, deallocation. parallel l/0, etc; Mesh data model abstractions that enable the development of mesh-based computational algorithms that work with many diverse, application· specific mesh types; and Computational geometry primitives for developing high performance parallel algorithms based on spatial geometry and meshes, e.g., spatial acceleration data structures, sets, maps, relations, etc.

Hornung, RichardD.↗