Search NASA⌕ Search

SEARCH · Search NASA

Results for “CARTs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Selected developments in laser wire stripping

The operation of mechanical and thermal strippers and the early development of laser wire strippers are reviewed. NASA sponsored development of laser wire stripping for space shuttle includes bench-type strippers as well as an advanced portable hand-held stripper which incorporates a miniaturized carbon dioxide laser and a rotating optics unit with a gas-jet assist and debris exhaust. Drives and controls girdle the wire and slit the remaining slug without manual assistance. This unit can strip wire sizes 26 through 12 gage. A larger-capacity hand-held unit for wire sizes through 1/0 gage was built using a neodynium-doped yttrium aluminum garnet (Nd:YAG) laser. The hand-held units have a flexible umbilical cable to an accompanying cart that carries the power supply, gas supply, cooling unit, and the controls.

Source record↗
NASA NTRS1981

NASA Metrology and Calibration, 1980

The proceedings of the fourth annual NASA Metrology and Calibration Workshop are presented. This workshop covered (1) review and assessment of NASA metrology and calibration activities by NASA Headquarters, (2) results of audits by the Office of Inspector General, (3) review of a proposed NASA Equipment Management System, (4) current and planned field center activities, (5) National Bureau of Standards (NBS) calibration services for NASA, (6) review of NBS's Precision Measurement and Test Equipment Project activities, (7) NASA instrument loan pool operations at two centers, (8) mobile cart calibration systems at two centers, (9) calibration intervals and decals, (10) NASA Calibration Capabilities Catalog, and (11) development of plans and objectives for FY 1981. Several papers in this proceedings are slide presentations only.

Source record↗
NASA NTRS1981

X-ray astronomy instrumentation studies

Preliminary designs were made for a multiplane, multiwire position sensitive proportional counter for X-ray use. Anode spacing was 2 mm and cathode spacing 1 mm. Assistance was provided in setting up and operating two multiwire proportional counters, one with 5 mm anode spacing, and the other with 2 mm spacing. Argon-based counter gases were used for preliminary work in assembling a working experimental system to measure xenon fluorescence yields. The design and specification of a high purity gas filling system capable of supplying mixtures of xenon and other gases to proportional counters was also performed. The system is mounted on a cart, is fully operational, and is flexible enough to be easily used as a pumping station for other clean applications. When needed, assistance was given to put into operation various computer-related pieces of equipment.

Gregory, J. C.↗
NASA NTRS1983

Transporter for Treated Sheet Materials

Plastic spacers keep parts separated during transport or storage. Cart with rods and spacers holds sheets with delicate finishes for storage or transport. Sheets supported vertically by rods, or horizontally. Spacers keep sheets separated. Designed to eliminate time and expense of tapping, wrapping, and sometimes refinishing aluminum sheets with delicate anodized finished.

Pollack, M., H.↗
NASA NTRS1984

Portable Plating System

Plating system mounted on portable cart includes 30-gallon (23.5 liter) electrolyte tank, filler pump, heaters, replenishing anodes, plating rectifiers and tank rectifier to continously remove contaminants.

Flores, R.↗
NASA NTRS1984

Characteristics and capacities of the NASA Lewis Research Center high precision 6.7- by 6.7-m planar near-field scanner

A very precise 6.7- by 6.7-m planar near-field scanner has recently become operational at the NASA Lewis Research Center. The scanner acquires amplitude and phase data at discrete points over a vertical rectangular grid. During the design phase for this scanner, special emphasis was given to the dimensional stability of the structures and the ease of adjustment of the rails that determine the accuracy of the scan plane. A laser measurement system is used for rail alignment and probe positioning. This has resulted in very repeatable horizontal and vertical motion of the probe cart and hence precise positioning in the plane described by the probe tip. The resulting accuracy will support near-field measurements at 60 GHz without corrections. Subsystem design including laser, electronic and mechanical and their performance is described. Summary data are presented on the scan plane flatness and environmental temperature stability. Representative near-field data and calculated far-field test results are presented. Prospective scanner improvements to increase test capability are also discussed.

Sharp, G. R.↗
NASA NTRS1984

Solar-geophysical data number 479, August 1981. Part 2: (Comprehensive reports), data for January 1984 and August 1981 and miscellanea. Explanation of data reports issued as number 474 (supplement) February 1984

Various solar physical data are presented including: data for January 1984--(solar radio bursts af fixed frequencies, solar X-ray radiation from GOES satellite, Mass ejections from the sun); data for August 1981--solar flares; Miscellaneous data--(meudon carte synoptique, solar X-ray radiation from GOES satellite).

Coffey, H. E.↗
NASA NTRS1984

Reduction of astrographic catalogues

An automatic program for the reduction of overlapping Carte du Ciel plates is described. The projection and transformation equations are given and the RAA subprogram flow is outlined. The program was applied to two different sets of data, namely to nine overlapping plates of the Cape Zone of the CdC, and to fifteen plates taken with the CIDA-refractor of the open cluster Tr10.

Stock, J.↗
NASA NTRS1985

Solar-geophysical data number 489, May 1985. Part 2: (Comprehensive reports). Data for December 1984, March-May 1983 and miscellanea

Contents include: detailed index for 1984 to 1985; data for December 1984--(Meudon Carte Synoptique, solar radio bursts at fixed frequencies, solar X-ray radiation from GOES satellite graphs, mass ejections from the sun, active prominences and filaments, solar irradiance); and data for March, April and May 1983--(solar flares March 1983, solar flares April 1983, solar flares May 1983, number of flares August 1966 to May 1983).

Coffey, H. E.↗
NASA NTRS1986

Modifications to the 4x7 meter tunnel for acoustic research: Engineering feasibility study

The NASA-Langley Research Center 4 x 7 Meter Low Speed Wind Tunnel is currently being used for low speed aerodynamics, V/STOL aerodynamics and, to a limited extent, rotorcraft noise research. The deficiencies of this wind tunnel for both aerodynamics and aeroacoustics research have been recognized for some time. Modifications to the wind tunnel are being made to improve the test section flow quality and to update the model cart systems. A further modification of the 4 x 7 Meter Wind Tunnel to permit rotorcraft model acoustics research has been proposed. As a precursor to the design of the proposed modifications, NASA is conducted both in-house and contracted studies to define the acoustic environment within the wind tunnel and to provide recommendations or the reduction of the wind tunnel background noise to a level acceptable to acoustics researchers. One of these studies by an acoustics consultant, has produced the primary reference documents that define the wind tunnel noise sources and outline recommended solutions.

Source record↗
NASA NTRS1985

Solar-geophysical data number 494, October 1985, Part 2: (Comprehensive reports). Data for April 1985, January-June 1984 and miscellanea

Contents include: detailed index for 1985; data for April 1985 (Meudon carte synoptique, solar radio bursts at fixed frequencies, solar X-ray radiation form GOES satellite, mass ejections from the sun, active prominences and filaments); data for January to June 1984 (solar flares January 1984, solar flares February 1984, solar flares March l984, solar flares April 1984, solar flares May 1984, solar flares June 1984, and number of flates August 1966 to June 1984); and miscellaneous data (interplanetary solar wind July 1984 to March 1985, errata solar X-rays event list January 1985).

Coffey, H. E.↗
NASA NTRS1986

Solar-Geophysical Data Number 498, February 1986. Part 2: (Comprehensive reports). Data for August1985, and miscellanea

Solar-Geophysical Data Number 498, February 1986, Part 2 (Comprehensive Reports), Data for August 1985, and Miscellenea contains the following: detailed index for 1985-86; data for August 1985--(Solar flares, Solar radio bursts at fixed frequencies, Solar X-ray radiation from GOES satellite, Mass ejections from the Sun, Active prominences and filaments); miscellaneous data--Meudon carte synoptique 13 May - 7 July 1985.

Coffey, H. E.↗
NASA NTRS1986

Solar-Geophysical Data Number 497, January 1986. Part 2: (Comprehensive reports). Data for July 1985, and miscellanea

Solar-Geophysical Data Number 497, January 1986. Part 2: (Comprehensive Reports); Data for July 1985, and Miscellanea contains the following: a detailed index for 1985; data for July 1985-(solar flares, solar radio bursts at fixed frequencies, solar x-ray radiation from GOES satellite, mass ejections from the sun, active prominences and filaments); and miscellaneous data-(Meudon carte synoptique 16 April - 13 May 1985, number of solar flares August 1966 - July 1985).

Coffey, H. E.↗
NASA NTRS1986

Solar-geophysical data number 499, March 1986. Part 2: (Comprehensive reports). Data for September 1986 and miscellanea

Solar-Geophysical Data Number 499, March 1986, Part 2 (Comprehensive Reports); Data for September 1985, and Miscellanea, contains the following: Detailed index for 1985 to 1986; Data for September 1985--(Solar flares, Solar radio bursts at fixed frequencies; Solar X-ray radiation from GOES satellite; Mass ejections from the Sun; Active prominences and filaments); (Meudon carte synoptique 7 July - 26 September 1985, Solar irradiance).

Coffey, H. E.↗
NASA NTRS1985

Advanced Digital SAR Processor (ADSP)

The objectives are to develop the technology required to meet the synthetic aperture radar (SAR) processing needs for missions in the late 1980's, and to build and demonstrate a high performance engineering model flexible enough to be easily adapted to a wide variety of SAR processing tasks and capable of real-time or near real-time throughput rates. Information on the Advanced Digital SAR Processor is given in the form of outlines, carts and diagrams.

Bicknell, Tom↗
NASA NTRS1987

Prediction of physical workload in reduced gravity environments

The background, development, and application of a methodology to predict human energy expenditure and physical workload in low gravity environments, such as a Lunar or Martian base, is described. Based on a validated model to predict energy expenditures in Earth-based industrial jobs, the model relies on an elemental analysis of the proposed job. Because the job itself need not physically exist, many alternative job designs may be compared in their physical workload. The feasibility of using the model for prediction of low gravity work was evaluated by lowering body and load weights, while maintaining basal energy expenditure. Comparison of model results was made both with simulated low gravity energy expenditure studies and with reported Apollo 14 Lunar EVA expenditure. Prediction accuracy was very good for walking and for cart pulling on slopes less than 15 deg, but the model underpredicted the most difficult work conditions. This model was applied to example core sampling and facility construction jobs, as presently conceptualized for a Lunar or Martian base. Resultant energy expenditures and suggested work-rest cycles were well within the range of moderate work difficulty. Future model development requirements were also discussed.

Goldberg, Joseph H.↗
NASA NTRS1988

Large planar maneuvers for articulated flexible manipulators

An articulated flexible manipulator carried on a translational cart is maneuvered by an active controller to perform certain position control tasks. The nonlinear dynamics of the articulated flexible manipulator are derived and a transformation matrix is formulated to localize the nonlinearities within the inertia matrix. Then a feedback linearization scheme is introduced to linearize the dynamic equations for controller design. Through a pole placement technique, a robust controller design is obtained by properly assigning a set of closed-loop desired eigenvalues to meet performance requirements. Numerical simulations for the articulated flexible manipulators are given to demonstrate the feasibility and effectiveness of the proposed position control algorithms.

Huang, Jen-Kuang↗
NASA NTRS1988

Large planar maneuvers for articulated flexible manipulators

An articulated flexible manipulator carried on a translational cart is maneuvered by an active controller to perform certain position control tasks. The nonlinear dynamics of the articulated flexible manipulator are derived and a transformation matrix is formulated to localize the nonlinearities in the inertia matrix. Then a feeback linearization scheme is introduced to linearize the dynamic equations for controller design. Through a pole placement technique, a robust controller design is obtained by properly assigning a set of closed-loop desired eigenvalues to meet performance requirements. Numerical simulations for the articulated flexible manipulators are given to demonstrate the feasibility and effectiveness of the proposed position control algorithms.

Huang, Jen-Kuang↗