Search NASA⌕ Search

SEARCH · Search NASA

Results for “CHART”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Program and charts for determining shock tube, and expansion tunnel flow quantities for real air

A computer program in FORTRAN 4 language was written to determine shock tube, expansion tube, and expansion tunnel flow quantities for real-air test gas. This program permits, as input data, a number of possible combinations of flow quantities generally measured during a test. The versatility of the program is enhanced by the inclusion of such effects as a standing or totally reflected shock at the secondary diaphragm, thermochemical-equilibrium flow expansion and frozen flow expansion for the expansion tube and expansion tunnel, attenuation of the flow in traversing the acceleration section of the expansion tube, real air as the acceleration gas, and the effect of wall boundary layer on the acceleration section air flow. Charts which provide a rapid estimation of expansion tube performance prior to a test are included.

Miller, C. G., III↗
NASA NTRS1975

Data for NASA's AVE 3 experiment: 25-mb sounding data and synoptic charts

The atmospheric variability experiment (AVE 3) is described and tabulated rawinsonde data at 25-mb intervals from the surface to 25 mb for the 41 stations is presented. The experiment was conducted between February 6 and February 7, 1975. Brief discussions are given on methods of data processing, changes in the reduction scheme since the AVE 2 pilot experiment, and data accuracy. An example of contact data is presented as well as synoptic charts prepared from the data.

Fuelberg, H. E.↗
NASA NTRS1975

Reflectance characteristics of the Viking lander camera reference test charts

Reference test charts provide radiometric, colorimetric, and spatial resolution references for the Viking lander cameras on Mars. Reflectance measurements of these references are described, including the absolute bidirectional reflectance of the radiometric references and the relative spectral reflectance of both radiometric and colorimetric references. Results show that the bidirection reflectance of the radiometric references is Lambertian to within + or - 7% for incidence angles between 20 deg and 60 deg, and that their spectral reflectance is constant with wavelength to within + or - 5% over the spectral range of the cameras. Estimated accuracy of the measurements is + or - 0.05 in relative spectral reflectance.

Wall, S. D.↗
NASA NTRS1975

Data for NASA's AVE 4 experiment: 25-mb sounding data and synoptic charts

The AVE 4 Experiment is described and tabulated rawinsonde data at 25-mb intervals from the surface to 25 mb for the 42 stations participating in the experiment are presented. Soundings were taken between 0000 GMT, April 24 and 1200 GMT, April 25, 1975. The methods of data processing and accuracy are discussed. Synoptic charts prepared from the data are presented, as well as an example of contact data.

Fucik, N. F.↗
NASA NTRS1975

Data for NASA's AVSSE 2 experiment: 25-mb sounding data and synoptic charts

This report describes the AVSSE II Experiment and presents tabulated rawinsonde data at 25 mb intervals from the surface to 25 mb for the 23 stations participating in the experiment. Soundings were taken between 1200 GMT, May 6 and 1200 GMT, May 7, 1975. Brief discussions are given on the methods of data processing and accuracy. Synoptic charts prepared from the data are presented, as well as an example of contact data.

Fucik, N. F.↗
NASA NTRS1975

Data for NASA's AVSSE 1 experiment: 25-mb sounding data and synoptic charts

The AVSSE I Experiment and is described tabulated rawinsonde data is presented for 25-mb intervals from the surface to 25mb for the 24 stations participating in the experiment. Soundings were taken between 1200 GMT, April 27, and 1200 GMT, April 28, 1975. Brief discussions are given on the methods of data processing and accuracy. Synoptic charts prepared from the data are presented, as well as an example of contact data.

Fucik, N. F.↗
NASA NTRS1976

Data for NASA's AVE 4 experiment: 25 mb sounding data and synoptic charts

The AVE IV Experiment is described and tabulated rawinsonde data at 25 mb intervals from the surface to 25 mb for the 42 stations participating in the experiment are presented. Soundings were taken between 0000 GMT, April 24, and 1,200 GMT, April 25, 1975. The methods of data processing and accuracy are briefly discussed. Synoptic charts prepared from the data are presented, as well as an example of contact data.

Fucik, N. F.↗
NASA NTRS1976

Data for NASA's AVSSE 2 experiment: 25 mb sounding data and synoptic charts

The AVSSE II experiment is described and tabulated rawinsonde data at 25 mb intervals from the surface to 25 mb for the 23 stations participating in the experiment are presented. Soundings were taken between 1,200 GMT, May 6, and 1,200 GMT, May 7, 1975. The methods of data processing and accuracy are briefly discussed. Synoptic charts prepared from the data are presented, as well as an example of contact data.

Fucik, N. F.↗
NASA NTRS1976

Data for NASA's AVSSE 1 Experiment: 25 Mb Sounding Data and Synoptic Charts

The AVSSE 1 Experiment is described and tabulated rawinsonde data at 25 mb intervals from the surface to 25 mb are presented for the 24 stations participating in the experiment. Soundings were taken between 1,200 GMT, April 27, and 1,200 GMT, April 28, 1975. The methods of data processing and accuracy are briefly discussed. Synoptic charts prepared from the data are presented, as well as an example of contact data.

Fucik, N. F.↗
NASA NTRS1976

Hydrographic charting from LANDSAT Satellite: A comparison with aircraft imagery

The relative capabilities of two remote-sensing systems in measuring depth and, consequently, bottom contours in sandy-bottomed and sediment-laden coastal waters were determined quantitatively. The multispectral scanner (MSS), orbited on the LANDSAT-2 Satellite, and the ocean color scanner (OCS), flown on U-2 aircraft, were used. Analysis of imagery taken simultaneously indicates a potential for hydrographic charting of marine coastal and shallow shelf areas, even when water turbidity is a factor. Several of the eight optical channels examined on the OCS were found to be sensitive to depth or depth-related information. The greatest sensitivity was in OCS-4(0.544 + or - 0.012 microns) from which contours corresponding to depths up to 12m were determined. The sharpness of these contours and their spatial stability through time suggests that upwelling radiance is a measure of bottom reflectance and not of water turbidity. The two visible channels on LANDSAT's MSS were less sensitive in the discrimination of contours, with depths up to 8m in the high-gain mode (3x) determined in MSS-4(0.5 to 0.6 microns).

Middleton, E. M.↗
NASA NTRS1976

Table and charts of equilibrium normal shock and shock tube properties for pure argon with velocities to 18 km/sec

Equilibrium thermodynamic and flow properties are presented in tabulated and graphical form for moving, standing, and reflected normal shock waves in pure argon. Properties include pressure, temperature, density, enthalpy, speed of sound, entropy, molecular-weight ratio, isentropic exponent, velocity, and species mole fractions. Incident (moving) shock velocities are varied from 2 to 18 km/sec for a range of initial pressure of 5 N/sq m to 500 kN/sq m. Working charts illustrating shock tube performance with argon test gas and heated helium and hydrogen driver gases are also presented.

Miller, C. G., III↗
NASA NTRS1976

Table and charts of equilibrium normal-shock and shock-tube properties for pure carbon dioxide with velocities from 1 to 16 km/sec

Equilibrium thermodynamic and flow properties are presented in tabulated and graphical form for moving, standing, and reflected normal shock waves in pure CO2. Properties include pressure, temperature, density, enthalpy, speed of sound, entropy, molecular weight ratio, isentropic exponent, velocity, and species mole fractions. Incident (moving) shock velocities are varied from 1 to 16 km/sec for a range of initial pressure of 5 N/sq m to 500 kN/sq m. The present results are applicable to shock tube flows and to freeflight conditions for a blunt body at high velocities. Working charts illustrating idealized shock tube performance with CO2 test gas and heated helium and hydrogen driver gases are also presented.

Miller, C. G., III↗
NASA NTRS1977

Design charts for arbitrarily pivoted, liquid-lubricated flat-sector-pad thrust bearing

A flat, sector-shaped geometry for a liquid-lubricated thrust bearing is analyzed considering both the pitch and roll of the pad. Results are presented in design charts that enable a direct approach to the design of point- and line-pivoted, tilting pad bearings. A comparison is made with the Mitchell bearing approximation and it is found that this approximation always overestimates load capacity.

Etsion, I.↗
NASA NTRS1977

GASPLOT - A computer graphics program that draws a variety of thermophysical property charts

A FORTRAN V computer program, written for the UNIVAC 1100 series, is used to draw a variety of precision thermophysical property charts on the Calcomp plotter. In addition to the program (GASPLOT), which requires (15 160) sub 10 storages, a thermophysical properties routine needed to produce plots. The program is designed so that any two of the state variables, the derived variables, or the transport variables may be plotted as the ordinate - abscissa pair with as many as five parametric variables. The parameters may be temperature, pressure, density, enthalpy, and entropy. Each parameter may have as many a 49 values, and the range of the variables is limited only by the thermophysical properties routine.

Trivisonno, R. J.↗
NASA NTRS1979

Graphics program for charts

GASPLOT program is reliable, economical, and easy-to-use method of producing variety of thermophysical-property charts.

Hendricks, R. C.↗
NASA NTRS1977

Data for NASA's AVE 6 experiment: 25-mb sounding data and synoptic charts

The Atmospheric Variability Experiments 6 experiment is described, and tabulated rawinsonde data at 25-mb intervals from the surface to 25 mb for the 22 stations participating in the experiment is presented. Soundings were taken between 0000 GMT 27 May and 1200 GMT 28 May 1977. The methods of data processing and their accuracy are briefly discussed. Synoptic charts prepared from the data are presented together with an example of contact data.

Dupuis, L. R.↗
NASA NTRS1976

Hydrographic charting from Landsat satellite - A comparison with aircraft imagery

The relative capabilities of two remote-sensing systems in measuring depth and, consequently, bottom contours in sandy-bottomed and sediment-laden coastal waters were determined quantitatively. The Multispectral Scanner (MSS), orbited on the Landsat-2 satellite, and the Ocean Color Scanner (OCS), flown on U-2 aircraft, were used for this evaluation. Analysis of imagery taken simultaneously indicates a potential for hydrographic charting of marine coastal and shallow shelf areas, even when water turbidity is a factor. Several of the eight optical channels examined on the OCS were found to be sensitive to depth or depth-related information. The greatest sensitivity was in OCS-4 (0.544 plus or minus 0.012 micron) from which contours corresponding to depths up to 12 m were determined. The sharpness of these contours and their spatial stability through time suggests that upwelling radiance is a measure of bottom reflectance and not of water turbidity. The two visible channels on Landsat's MSS were less sensitive in the discrimination of contours, with depths up to 8 m in the high-gain mode (3 X) determined in MSS-4 (0.5 to 0.6 micron).

Middleton, E. M.↗
NASA NTRS1980

A computer program for the generation of logic networks from task chart data

The Network Generation Program (NETGEN), which creates logic networks from task chart data is presented. NETGEN is written in CDC FORTRAN IV (Extended) and runs in a batch mode on the CDC 6000 and CYBER 170 series computers. Data is input via a two-card format and contains information regarding the specific tasks in a project. From this data, NETGEN constructs a logic network of related activities with each activity having unique predecessor and successor nodes, activity duration, descriptions, etc. NETGEN then prepares this data on two files that can be used in the Project Planning Analysis and Reporting System Batch Network Scheduling program and the EZPERT graphics program.

Herbert, H. E.↗