Search NASA⌕ Search

SEARCH · Search NASA

Results for “COAXIAL FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Numerical and experimental investigation of nonswirling and swirling confined jets

An investigation of the influence of large scale structures on the flow development for coaxial jets with sudden expansion (with and without swirl) is presented. Both an experimental study and numerical predictions were performed for a configuration corresponding to that considered by Johnson and Bennett and Roback and Johnson. The effects of large scale structures on the swirling and nonswirling flows are documented, in particular their influence on turbulence modeling and the numerical simulation. The ensemble-averaged, time-dependent Navier-Stokes equations are solved by an LBI procedure to predict the turbulent flow field. Effects of artificial dissipation and placement of the upstream boundary in the numerical computation are also discussed.

Brondum, D. C.↗
NASA NTRS1995

Numerical modeling of spray combustion with an advanced VOF method

This paper summarizes the technical development and validation of a multiphase computational fluid dynamics (CFD) numerical method using the volume-of-fluid (VOF) model and a Lagrangian tracking model which can be employed to analyze general multiphase flow problems with free surface mechanism. The gas-liquid interface mass, momentum and energy conservation relationships are modeled by continuum surface mechanisms. A new solution method is developed such that the present VOF model can be applied for all-speed flow regimes. The objectives of the present study are to develop and verify the fractional volume-of-fluid cell partitioning approach into a predictor-corrector algorithm and to demonstrate the effectiveness of the present approach by simulating benchmark problems including laminar impinging jets, shear coaxial jet atomization and shear coaxial spray combustion flows.

Chen, Yen-Sen↗
NASA NTRS1995

Cooperative Testing of Rocket Injectors That Use Gaseous Oxygen and Hydrogen

Gaseous oxygen and hydrogen propellants used in a special engine energy cycle called Full-Flow Staged Combustion are believed to significantly increase the lifetime of a rocket engine's pumps. The cycle can also reduce the operating temperatures of the engine. Improving the lifetime of the hardware reduces its overall maintenance and operations costs, and is critical to reducing costs for the joint NASA/industry Reusable Launch Vehicle (RLV). The work in this project will demonstrate the performance and lifetime of one-element and many-element combustors with gaseous O2/H2 injectors. This work supporting the RLV program is a cooperative venture of the NASA Lewis Research Center, the NASA Marshall Space Flight Center, Rocketdyne, and the Pennsylvania State University. Information about gas-gas rocket injector performance with O2/H2 is very limited. Because of this paucity of data, new testing is needed to improve the knowledge base for testing and designing new injectors for the RLV and to improve computer models that predict the combusting gas flows of new injector designs. Therefore, detailed observations and measurements of the combusting flow from many-element injectors in a rocket engine are being sought. These observations and measurements will be done with three different tools: schlieren photography, ultraviolet imaging, and Raman spectroscopy. The schlieren system will take photos of the density differences in combusting flow, the ultraviolet movies will determine the location of the hydroxyl (OH) radical in the combustion flow, and the Raman spectroscopic measurements will provide the combustion temperature and amount of water (H2O), hydrogen (H2), and oxygen (O2) in the combustor. Marshall is providing overall program management, design and computational fluid dynamics (CFD) analyses, as well as funding for the work at Penn State. An existing, windowed combustor and several injectors will be provided by Rocketdyne--two injectors for the initial screening tests and one with an optimized design based on the best design found in the screening tests. Lewis will provide a nozzle and several injectors for the screening test program. The configuration of the injectors will be based on a design chosen by all the participants, and their elements will be based on the coaxial and impinging flow. Lewis also will provide the instrumentation for the flow-field measurements: schlieren, ultraviolet imaging, and Raman spectroscopy. In addition, thermocouples will measure heat flow on the injector face. Other traditional measurements of rocket performance will be made as well: chamber pressure, mass flow of each propellant, purge flow, and the barrier cooling gas flow. Penn State will conduct single-element testing with the injector elements from both the Rocketdyne and the jointly designed injectors. A wide variety of traditional and nontraditional injector designs will be tested in this program. The results will be valuable in computational fluid dynamics code validation and overall rocket combustion efficiency measurements. Correlations between combustion efficiency, laser measurements of species, and ultraviolet and visible light photography will also be made. Thus far, several different single-element injectors have been tested at Penn State and Lewis. The experimental setup of a rocket engine with a viewing window is shown. The combusting flow is shown. The results are helping engineers design the many element injectors.

Source record↗
NASA NTRS1974

Developing a gas rocket performance prediction technique

A simple, semi-empirical performance correlation/prediction technique applicable to gaseous and liquid propellant rocket engines is presented. Excellent correlations were attained for over 100 test firings by adjusting the computation of the gaseous mixing of an unreactive, coaxial jet using a correlation factor, F, which resulted in prediction of the experimental combustion efficiency for each firing. Static pressure, mean velocity and turbulence intensity in the developing region of non-reactive coaxial jets, typical of those of coaxial injector elements were determined. Detailed profiles were obtained at twelve axial locations (extending from the nozzle exit for a distance of five diameters) downstream from a single element of the Bell Aerospace H2/O2 19-element coaxial injector. These data are compared with analytical predictions made using both eddy viscosity and turbulence kinetic energy mixing models and available computer codes. Comparisons were disappointing, demonstrating the necessity of developing improved turbulence models and computational techniques before detailed predictions of practical coaxial free jet flows are attempted.

Morgenthaler, J. H.↗
NASA NTRS1981

A modal separation measurement technique for broadband noise propagating inside circular ducts

A measurement technique which separates broadband noise propagating inside circular ducts into the acoustic duct modes is developed. The technique is also applicable to discrete frequency noise. The acoustic modes are produced by weighted combinations of the instantaneous outputs of microphones spaced around the duct circumference. The technique is compared with the cross spectral density approach presently available and found to have certain advantages, and disadvantages. Considerable simplification of both the new technique and the cross spectral density approach occurs when no correlation exists between different circumferential mode orders. The properties leading to uncorrelated modes and experimental tests which verify this condition are discussed. The modal measurement technique is applied to the case of broadband noise generated by flow through a coaxial obstruction (nozzle or orifice) in a pipe. Different circumferential mode orders are shown to be uncorrelated for this type of noise source.

Kerschen, E. J.↗
NASA NTRS1985

Buoyancy Effects upon Vapor Flame and Explosion Processes

The objective of this microgravity project is to develop an experimental and theoretical analyses critical to the understanding of the coupling of buoyancy and turbulence generation and its effect on fuel-air mixing, flame intensity and flame propagation in jet diffusion flames. The experiment is designed to examine certain effects of buoyancy acting on a diffusion flame in which the flame is directed either upward or downward. This change from negative to positive g is observed to significantly alter the flame shape although all other operating conditions are the same for both configurations. However, to perform this experiment a significant coaxial secondary air flow is needed in order to prevent flow reversal when the flame is inverted. The theoretical analysis that has been developed handles the secondary air flow and the extreme change in gravity vector direction. Thus the data will provide a measure of credibility of the analysis which will then be used to assist in the design of the actual zero-g experiment.

Edelman, R. B.↗
NASA NTRS1987

Comprehensive modeling of turbulent particulate flows using Eulerian and Lagrangian schemes

This paper addresses turbulent particle dispersion and modulation effects in dilute gas-particle turbulent flows using the Eulerian and Lagrangian modeling approaches. Gradient diffusion approximations are employed in the Eulerian formulation, while a stochastic procedure is utilized to simulate turbulent dispersion in the Lagrangian formulation. The k-epsilon turbulence model is used to characterize the time and length scales of the continuous phase turbulence. For the particle size and loading considered, the turbulence transport equations must be modified to account for the modulation effects. Models are proposed for both Eulerian and Lagrangian schemes. Comparisons and predictions are made in fully developed gas-solid pipe flow and confined coaxial jets laden with particles. For the monodispersed system investigated, Eulerian approach is less expensive and gives more consistent results than the Lagrangian approach. The Lagrangian technique should be further developed to eliminate current inherent inconsistencies especially with regard to the symmetry boundary condition.

Adeniji-Fashola, A.↗
NASA NTRS1995

Statistical studies of impulsive events at high latitudes

A statistical study has been made of the high-latitude impulsive events that were observed during the 1985-1986 South Pole Balloon Campaign. The events were selected by searching for unipolar pulses greater than or equal to 10 nT above background in the vertical component of the magnetic field on the ground and/or pedestal or 'W' shaped horizontal electric field perturbations greater than or equal to 10 mV/m in amplitude and accompanied by perturbations in the vertical electric field at balloon altitude. A main event list comprising 112 events was compiled from the 468 hours of data available. Three aspects of the events were examined: the solar wind conditions prior to the event, local time of observation, and intrinsic properties of the events. The local time distribution was obtained from the 112 entry main event list and was found to be nearly uniform across the dayside, with no midday gap. The event rate found using our low-amplitude selection criteria was 0.7 event/hr, comparable to expectations based on in situ studies of the magnetopause. A total of 42 events were found for which data were available from Interplanetary Monitoring Platform (IMP) 8. Of these events, 12 occurred when the Z(sub GSM) component (B(sub Z)) of the interplanetary magnetic field (IMF) was northward and 30 occurred when B(sub Z) was southward or fluctuating. Only three of the B(sub Z) northward cases and only five of the B(sub Z) southward cases were preceded by pressure pulses greater than 0.4 nPa in amplitude. Ten of the events were studied in detail by means of a model-fitting method discussed elsewhere. This method infers values of several parameters, including the total current flowing in a coaxial or monopole system and a two-dimensional dipole system. The intrinsic properties of the events showed that only approximately 10% of the total current contributed to momentum transfer to the high-latitude ionosphere, that the direction of the motion depended more on local time of observation than IMF B(sub y), and that events were usually several hundred kilometers in size. The observed B(sub z) control found in the 42 event list and the prevalence of coaxial current dominated events are inconsistent with the predictions of the pressure pulse model.

Lin, Z. M.↗
NASA NTRS1981

Forced and natural convection in laminar-jet diffusion flames

An experimental investigation was conducted on methane, laminar-jet, diffusion flames with coaxial, forced-air flow to examine flame shapes in zero-gravity and in situations where buoyancy aids (normal-gravity flames) or hinders (inverted-gravity flames) the flow velocities. Fuel nozzles ranged in size from 0.051 to 0.305 cm inside radius, while the coaxial, convergent, air nozzle had a 1.4 cm inside radius at the fuel exit plane. Fuel flows ranged from 1.55 to 10.3 cu cm/sec and air flows from 0 to 597 cu cm/sec. A computer program developed under a previous government contract was used to calculate the characteristic dimensions of normal and zero-gravity flames only. The results include a comparison between the experimental data and the computed axial flame lengths for normal gravity and zero gravity which showed good agreement. Inverted-gravity flame width was correlated with the ratio of fuel nozzle radius to average fuel velocity. Flame extinguishment upon entry into weightlessness was studied, and it was found that relatively low forced-air velocities (approximately 10 cm/sec) are sufficient to sustain methane flame combustion in zero gravity. Flame color is also discussed.

Haggard, J. B., Jr.↗
NASA NTRS1975

Coaxial injector response to axial instability under simulated cold-flow

The frequency dependence of the admittances and response factors of various gaseous rocket injector configurations subject to axial instabilities under cold-flow conditions, have been measured using the modified impedance-tube technique. The tested configurations simulate the flows in a gaseous-fuel injector, gaseous-oxidizer injector and a coaxial injector with both fuel and oxidizer elements. Comparison of the measured response data with corresponding data predicted by the Feiler and Heidmann model indicates good agreement between the two sets of data.

Janardan, B. A.↗
NASA NTRS1992

Heat transfer in rocket engine combustion chambers and nozzles

The complexities of liquid rocket engine heat transfer which involve the injector faceplate and regeneratively and film cooled walls are being investigated by computational analysis. A conjugate heat transfer analysis will be used to describe localized heating phenomena associated with particular injector configurations and coolant channels and film coolant dumps. These components are being analyzed, and the analysis verified with appropriate test data. Finally, the component analysis will be synthesized into an overall flowfield/heat transfer model. The FDNS code is being used to make the component analyses. Particular attention is being given to the representation of the thermodynamic properties of the fluid streams and to the method of combining the detailed models to represent overall heating. Unit flow models of specific coaxial injector elements have been developed and will be described. Film cooling simulations of film coolant flows typical of the subscale Space Transportation Main Engine (STME) being experimentally studied by Pratt and Whitney have been made, and these results will be presented. Other film coolant experiments have also been simulated to verify the CFD heat transfer model being developed. The status of the study and its relevance as a new design tool are covered. Information is given in viewgraph form.

Anderson, P. G.↗
NASA NTRS1984

Static jet noise test results of four 0.35 scale-model QCGAT mixer nozzles

As part of the NASA Quiet Clean General Aviation Turbofan (QCGAT) engine mixer-nozzle exhaust system program, static jet exhaust noise was recorded at microphone angles of 45 to 155 deg relative to the nozzle inlet for a conventional profile coaxial nozzle and three 12-lobed coaxial mixer nozzles. Both flows in all four nozzles are internally mixed before being discharged from a single exhaust nozzle. The conventional profile coaxial nozzle jet noise is compared to the current NASA Lewis coaxial jet noise prediction and after applying an adjustment to the predicted levels based on the ratio of the kinetic energy of the primary and secondary flows, the prediction is within a standard deviation of 0.9 dB of the measured data. The mass average (mixed flow) prediction is also compared to the noise data for the three mixer nozzles with a reasonably good fit after applying another kinetic energy ratio adjustment (standard deviation of 0.7 to 1.5 dB with the measured data). The tests included conditions for the full-scale engine at takeoff (T.O.), cutback (86% T.O.) and approach (67% T.O.).

Groesbeck, D. E.↗
NASA NTRS2006

A Computational and Experimental Investigation of Shear Coaxial Jet Atomization

The instability and subsequent atomization of a viscous liquid jet emanated into a high-pressure gaseous surrounding is studied both computationally and experimentally. Liquid water issued into nitrogen gas at elevated pressures is used to simulate the flow conditions in a coaxial shear injector element relevant to liquid propellant rocket engines. The theoretical analysis is based on a simplified mathematical formulation of the continuity and momentum equations in their conservative form. Numerical solutions of the governing equations subject to appropriate initial and boundary conditions are obtained via a robust finite difference scheme. The computations yield real-time evolution and subsequent breakup characteristics of the liquid jet. The experimental investigation utilizes a digital imaging technique to measure resultant drop sizes. Data were collected for liquid Reynolds number between 2,500 and 25,000, aerodynamic Weber number range of 50-500 and ambient gas pressures from 150 to 1200 psia. Comparison of the model predictions and experimental data for drop sizes at gas pressures of 150 and 300 psia reveal satisfactory agreement particularly for lower values of investigated Weber number. The present model is intended as a component of a practical tool to facilitate design and optimization of coaxial shear atomizers.

Ibrahim, Essam A.↗
NASA NTRS2003

Development of Efficient Real-Fluid Model in Simulating Liquid Rocket Injector Flows

The characteristics of propellant mixing near the injector have a profound effect on the liquid rocket engine performance. However, the flow features near the injector of liquid rocket engines are extremely complicated, for example supercritical-pressure spray, turbulent mixing, and chemical reactions are present. Previously, a homogeneous spray approach with a real-fluid property model was developed to account for the compressibility and evaporation effects such that thermodynamics properties of a mixture at a wide range of pressures and temperatures can be properly calculated, including liquid-phase, gas- phase, two-phase, and dense fluid regions. The developed homogeneous spray model demonstrated a good success in simulating uni- element shear coaxial injector spray combustion flows. However, the real-fluid model suffered a computational deficiency when applied to a pressure-based computational fluid dynamics (CFD) code. The deficiency is caused by the pressure and enthalpy being the independent variables in the solution procedure of a pressure-based code, whereas the real-fluid model utilizes density and temperature as independent variables. The objective of the present research work is to improve the computational efficiency of the real-fluid property model in computing thermal properties. The proposed approach is called an efficient real-fluid model, and the improvement of computational efficiency is achieved by using a combination of a liquid species and a gaseous species to represent a real-fluid species.

Cheng, Gary↗
NASA NTRS1984

Asymmetric instabilities in buoyancy-driven flow in a tall vertical annulus

Linear stability of the one-dimensional flow between infinite vertical coaxial cylinders induced by heating the inner cylinder is considered for various ratios (kappa) of the inner radius to the outer radius, and for Prandtl numbers (P) appropriate to air and water. For air with P = 0.71 the least stable disturbance is nonaxisymmetric for kappa less than 0.44 and is axisymmetric for kappa greater than 0.44, and in either case the instability is due to the action of the shear forces. For P = 3.5, the situation is similar, except that the asymmetric shear mode is superseded by an axisymmetric instability driven by buoyancy forces for kappa = 0.03-0.16. Wave speeds, wavenumbers, and critical Grashof numbers for these cases and for the case of zero Prandtl number are given.

Mcfadden, G. B.↗
NASA NTRS1990

Development of comprehensive numerical schemes for predicting evaporating gas-droplets flow processes of a liquid-fueled combustor

An existing Computational Fluid Dynamics code for simulating complex turbulent flows inside a liquid rocket combustion chamber was validated and further developed. The Advanced Rocket Injector/Combustor Code (ARICC) is simplified and validated against benchmark flow situations for laminar and turbulent flows. The numerical method used in ARICC Code is re-examined for incompressible flow calculations. For turbulent flows, both the subgrid and the two equation k-epsilon turbulence models are studied. Cases tested include idealized Burger's equation in complex geometries and boundaries, a laminar pipe flow, a high Reynolds number turbulent flow, and a confined coaxial jet with recirculations. The accuracy of the algorithm is examined by comparing the numerical results with the analytical solutions as well as experimented data with different grid sizes.

Chen, C. P.↗
NASA NTRS1991

Liquid atomization by coaxial rocket injectors

The atomization characteristics of a scaled-down version of a coaxial rocket injector was investigated using a phase Doppler particle analyzer (PDPA). The injector was operated in the conventional mode with liquid being injected through its inner orifice and gas being injected through its outer annulus. The shearing action occurring at the liquid-gas interface causes the liquid jet to atomize. In this study, two different liquid-air systems, namely a water-air system and a liquid nitrogen-gaseous nitrogen system, were chosen for detailed investigation. This paper discusses the performance characteristics of the coaxial injector under different flow and geometric conditions. Specifically, the effects of injection gas pressure and the injector cavity size on variables such as the mean particle diameter, Sauter mean diameter, number density, volume flux, and velocity have been presented.

Sankar, S. V.↗