SEARCH · Search NASA

Results for “CONCENTRATOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Secondary and compound concentrators for parabolic dish solar thermal power systems

A secondary optical element may be added to a parabolic dish solar concentrator to increase the geometric concentration ratio attainable at a given intercept factor. This secondary may be a Fresnel lens or a mirror, such as a compound elliptic concentrator or a hyperbolic trumpet. At a fixed intercept factor, higher overall geometric concentration may be obtainable with a long focal length primary and a suitable secondary matched to it. Use of a secondary to increase the geometric concentration ratio is more likely to e worthwhile if the receiver temperature is high and if errors in the primary are large. Folding the optical path with a secondary may reduce cost by locating the receiver and power conversion equipment closer to the ground and by eliminating the heavy structure needed to support this equipment at the primary focus. Promising folded-path configurations include the Ritchey-Chretien and perhaps some three element geometries. Folding the optical path may be most useful in systems that provide process heat.

Jaffe, L. D.↗

NASA NTRS1981

Investigation of the winds and electron concentration variability in the D region of the ionosphere by the partial-reflection radar technique

The development and first observations of the partial-reflection drifts experiment at Urbana, Illinois (40 N) are described. The winds data from the drifts experiment are compared with electron concentration data obtained by the differential-absorption technique to study the possible meteorological causes of the winter anomaly in the mesosphere at midlatitudes. winds data obtained by the meteor-radar experiment at Urbana are also compared with electron concentration data measured at Urban. A significant correlation is shown is both cases between southward winds and increasing electron concentration measured at the same location during winter. The possibility of stratospheric/mesospheric coupling is investigated by comparing satellite-measured 0.4 mbar geopotential data with mesospheric electron concentration data. No significant coupling was observed. The winds measured at Saskatoon, Saskatchewan (52 N) are compared with the electron concentrations measured at Urban, yielding constant fixed relationship, but significant correlations for short segments of the winter. A significant coherence is observed at discrete frequencies during segments of the winter.

Weiland, R. M.↗

NASA NTRS1981

Dish concentrators for solar thermal energy - Status and technology development

Comparisons are presented of point-focusing, or 'dish' solar concentrator system features, development status, and performance levels demonstrated to date. In addition to the requirements of good optical efficiency and high geometric concentration ratios, the most important future consideration in solar thermal energy dish concentrator design will be the reduction of installed and lifetime costs, as well as the materials and labor costs of production. It is determined that technology development initiatives are needed in such areas as optical materials, design wind speeds and wind loads, structural configuration and materials resistance to prolonged exposure, and the maintenance of optical surfaces. The testing of complete concentrator systems, with energy-converting receivers and controls, is also necessary. Both reflector and Fresnel lens concentrator systems are considered.

Jaffe, L. D.↗

NASA NTRS1982

Methane and nonmethane hydrocarbon concentrations in the Atlantic marine boundary layer

The reactions of reduced tropospheric trace gases with hydroxyl radicals are thought to play a significant role in global tropospheric photochemistry. Since tropospheric methane and nonmethane hydrocarbon (NMHC) concentrations will affect the tropospheric hydroxyl radical concentrations, accurate measurements of tropospheric CH4 and NMHC concentrations are necessary. Such measurements were, therefore, included in the first leg (from Hamburg, West Germany to Montevideo, Uruguay) of the 1980-1981 Antarctic Expedition. On the basis of the obtained data, a pronounced gradient between northern and southern hemispheric methane concentrations was observed in the marine boundary layer in the region of the intertropical convergence zone. Methane concentrations gradually decreased from about 1.70 ppmv at 40 deg N latitude to about 1.68 ppmv at 14 deg N latitude, then dropped sharply between 14 deg N and 10 deg N latitude to about 1.61 ppmv. NMHC data are also discussed.

Cofer, W. R., III↗

NASA NTRS1981

The feasibility of using time-dependent photochemical calculations to infer radical species concentrations from solar occultation absorption measurements

In connection with fast chemical reactions, short-lived stratospheric species experience rapid concentration variations at sunset and sunrise. For solar occultation absorption measurements, these rapid concentration variations may introduce significant errors with respect to the inference of atmospheric abundances for some species due to asymmetrical concentration distributions. Most retrieval algorithms assume that concentration distributions are spherically symmetric. The effect of this assumption on the accuracy of inferred concentrations has been studied by Kerr et al. (1977). The present investigation considers the feasibility of using a time-dependent one-dimensional photochemical model to provide detailed information about the asymmetrical distribution for use in the retrieval procedure. As shown by Boughner et al. (1980), diurnal effects can be represented by an inhomogeneity factor. It is found that the NO retrieval improves considerably with the inclusion of a correction factor containing the asymmetrical variations.

Larsen, J. C.↗

NASA NTRS1982

Antarctic sea ice concentrations inferred from Nimbus 5 ESMR and Landsat imagery

Landsat Multispectral Scanner near-infrared band images (MSS-7) are used to calculate Antarctic ice concentration values and these results are quantitatively compared to those derived from Nimbus 5 electrically scanning microwave radiometer (ESMR) brightness temperature data. The set of images includes regions near the ice edge and near the continental boundary during late winter or spring. The percentage of ice cover is derived from the microwave data, using an algorithm that incorporates the brightness temperature emissivity and interpolated climatological physical temperatures and that is not dependent on spatial resolution. Cloud-free Landsat images are used to provide an alternative determination of large-scale ice concentrations, but this method is limited in its ability to resolve individual ice flows, especially near the ice edge. A proportional classification procedure is applied to Landsat data based on observed reflection and the results are correlated with similarly-derived ESMR ice concentration values. The corresponding ice concentration values are found to agree to + or - 15%, with the largest uncertainties occurring in regions of low ice concentration.

Comiso, J. C.↗

NASA NTRS1982

Trace element concentrations in the isotopically unique Allende inclusion, EK 1-4-1

The bulk sample and mineral separates of the isotopically unique Allende inclusion, EK 1-4-1, are analyzed by instrumental neutron activation for the concentrations of REE, Sc, Fe, Co, Cr, Na, and Ir, and REE concentrations were also determined by mass spectrometric isotope dilution for two density separates. Results show that the inclusion is enriched in light REE compared to heavy REE with a positive Yb anomaly, and has a high Cr concentration, both of which indicate group II affinity, although EK 1-4-1 is a coarse-grained group I inclusion. On the other hand, high Ir, and Sc, and low FeO and Co concentrations were found in the bulk inclusion, and low Na concentrations were found in mineral separates, which indicate an affinity to group I. In addition, for melilite and pyroxene fractions REE, Sc, Co, and Fe were determined to have distributions that were substantially different from those observed for normal Allende type B inclusions.

Nagasawa, H.↗

NASA NTRS1982

A transmittance-optimized, point-focus Fresnel lens solar concentrator

The development of a point-focus Fresnel lens solar concentrator for high-temperature solar thermal energy system applications is discussed. The concentrator utilizes a transmittance-optimized, short-focal-length, dome-shaped refractive Fresnel lens as the optical element. This concentrator combines both good optical performance and a large tolerance for manufacturing, deflection, and tracking errors. The conceptual design of an 11-meter diameter concentrator which should provide an overall collector efficiency of about 70% at an 815 C (1500 F) receiver operating temperature and a 1500X geometric concentration ratio (lens aperture area/receiver aperture area) was completed. Results of optical and thermal analyses of the collector, a discussion of manufacturing methods for making the large lens, and an update on the current status and future plans of the development program are included.

Oneill, M. J.↗

NASA NTRS1984

A Transmittance-optimized, Point-focus Fresnel Lens Solar Concentrator

Oneill, M. J.↗

NASA NTRS1984

Development and testing of Parabolic Dish Concentrator No. 1

Parabolic Dish Concentrator No. 1 (PDC-1) is a 12-m-diameter prototype concentrator with low life-cycle costs for use with thermal-to-electric energy conversion devices. The concentrator assembly features panels made of a resin transfer molded balsa core/fiberglass sandwich with plastic reflective film as the reflective surface and a ribbed framework to hold the panels in place. The concentrator assembly tracks in azimuth and elevation on a base frame riding on a circular track. It is shown that the panels do not exhibit the proper parabolic contour. However, thermal gradients were discovered in the panels with daily temperature changes. The PDC-1 has sufficient optical quality to operate satisfactorily in a dish-electric system. The PDC-1 development provides the impetus for creating innovative optical testing methods and valuable information for use in designing and fabricating concentrators of future dish-electric systems.

Dennison, E. W.↗

NASA NTRS1985

Rapid estimation of concentration of aromatic classes in middistillate fuels by high-performance liquid chromatography

An high performance liquid chromatography (HPLC) method to estimate four aromatic classes in middistillate fuels is presented. Average refractive indices are used in a correlation to obtain the concentrations of each of the aromatic classes from HPLC data. The aromatic class concentrations can be obtained in about 15 min when the concentration of the aromatic group is known. Seven fuels with a wide range of compositions were used to test the method. Relative errors in the concentration of the two major aromatic classes were not over 10 percent. Absolute errors of the minor classes were all less than 0.3 percent. The data show that errors in group-type analyses using sulfuric acid derived standards are greater for fuels containing high concentrations of polycyclic aromatics. Corrections are based on the change in refractive index of the aromatic fraction which can occur when sulfuric acid and the fuel react. These corrections improved both the precision and the accuracy of the group-type results.

Otterson, D. A.↗

NASA NTRS1986

Protective telescoping shield for solar concentrator

An apparatus is described for use with a solar concentrator such as a parabolic dish which concentrates sunlight onto a small opening of a solar receiver, for protecting the receiver in the event of a system failure that could cause concentrated sunlight to damage the receiver. The protective apparatus includes a structure which can be moved to a stowed position where it does not block sunlight, to a deployed position. In this position, the structure forms a tube which substantially completely surrounds an axis connecting the receiver opening to the center of the concentrator at locations between the receiver and the concentrator.

Argoud, M. J.↗

NASA NTRS1986

Concentration distributions in a model combustor

A hot-wire concentration probe with a spatial resolution of 0.13 mm is used to measure concentration in a model cylindrical combustor. The flow inside the combustor is simulated by injecting a helium jet into a cylindrical confinement with or without swirling air flow present. Mean concentrations are essentially zero outside of the jet region, indicating complete confinement of the scalar field by the swirling flow. Consequently, concentration fluctuations are found to be relatively weak compared to velocity fluctuations, and are maximum off-axis at a point which corresponds to the interface between helium and air flows. However, in the absence of a swirling air flow, the helium diffuses quickly to fill the combustor. The resulting helium concentrations are constant and do not resemble the jet-like behavior of the velocity field.

Ahmed, S. A.↗

NASA NTRS1986

Solar Concentrator Advanced Development Program, Task 1

Solar dynamic power generation has been selected by NASA to provide power for the space station. Solar dynamic concentrator technology has been demonstrated for terrestrial applications but has not been developed for space applications. The object of the Solar Concentrator Advanced Development program is to develop the technology of solar concentrators which would be used on the space station. The first task of this program was to develop conceptual concentrator designs and perform trade-off studies and to develop a materials data base and perform material selection. Three unique concentrator concepts; Truss Hex, Spline Radial Panel and Domed Fresnel, were developed and evaluated against weighted trade criteria. The Truss Hex concept was recommended for the space station. Materials data base development demonstrated that several material systems are capable of withstanding extended periods of atomic oxygen exposure without undesirable performance degradation. Descriptions of the conceptual designs and materials test data are included.

Source record↗

NASA NTRS1987

The potential impact on atmospheric ozone and temperature of increasing trace gas concentrations

The response of the atmosphere to emissions of chlorofluorocarbons (CFCs) and other chlorocarbons, and to increasing concentrations of other radiatively active trace gases such as CO2, CH4, and N2O is calculated by a coupled chemical-radiative transport one-dimensional model. It is shown that significant reductions in the ozone concentration and in the temperature are expected in the upper stratosphere as a result of increasing concentrations of active chlorine produced by photodecomposition of the CFCs. The ozone content is expected to increase in the troposphere, as a consequence of increasing concentrations of methane and nitrogen oxides. Due to enhanced greenhouse effects, the Earth's surface should warm up by several degrees. The amplitude and even the sign of future changes in the ozone column are difficult to predict as they are strongly scenario-dependent. An early detection system to prevent noticeable ozone changes as a result of increasing concentrations of source gases should thus be based on a continuous monitoring of the ozone amount in the upper stratosphere rather than on measurements of the ozone column only. Measurements of NOx, Clx, and HOx are also required for unambiguous trend detection and interpretation.

Brasseur, G.↗

NASA NTRS1988

Temperature effect on stress concentration around circular hole in a composite material specimen representative of X-29A forward-swept wing aircraft

The theory of anisotropic elasticity was used to evaluate the anisotropic stress concentration factors of a composite laminated plate containing a small circular hole. This advanced composite was used to manufacture the X-29A forward-swept wing. It was found for composite material, that the anisotropic stress concentration is no longer a constant, and that the locations of maximum tangential stress points could shift by changing the fiber orientation with respect to the loading axis. The analysis showed that through the lamination process, the stress concentration factor could be reduced drastically, and therefore the structural performance could be improved. Both the mixture rule approach and the constant strain approach were used to calculate the stress concentration factor of room temperature. The results predicted by the mixture rule approach were about twenty percent deviate from the experimental data. However, the results predicted by the constant strain approach matched the testing data very well. This showed the importance of the inplane shear effect on the evaluation of the stress concentration factor for the X-29A composite plate.

Yeh, Hsien-Yang↗

NASA NTRS1989

Raman intensity as a probe of concentration near a crystal growing in solution

The feasibility of using Raman spectral scattering signals for measurements of concentration profiles near a crystal interface during growth or dissolution is discussed. With KH2PO4 (KDP) as a test material, optical multichannel analyzer (OMA) detection of a solute Raman vibrational band provided direct quantification of solute concentration with band intensity. The intersection of incident laser and Raman collection optics provided 3-D selective point measurements of the solution concentration field. Unlike many other techniques, the Raman band intensity is not sensitive to the typical temperature variations. Precision calibration of Raman intensity versus KDP concentration with less than 1 pct standard deviation error levels was demonstrated. A fiber optic, which sampled incident laser intensity and coupled it to the OMA, provided a fully synchronized monitor of fluctuations in laser power to correlate with observed Raman signals. With 1 W of laser power at the sample, good data statistics required eight repeated data collections at approximately 2.5 min collection. The accumulated time represents the concentration measurement time at one spatial location. Photomicroscopy documented a 30 micrometer diameter by 200 micrometer of laser Raman scattering region in the solution near the crystal surface. The laser beam was able to approach up to 25 micrometer from the crystal surface. However, a crystal surface reflected intensity contribution was weakly detectable. Nucleated microcrystals were seen in the crystal-growing solution. These microcrystals convect right up to the crystal surface and indicate no quiet diffusion region under normal gravity conditions. Translation of the solution cell with respect to the optics caused systematic intensity errors.

Wilkinson, R. Allen↗

NASA NTRS1989

Concentric crater fill on Mars - An aeolian alternative to ice-rich mass wasting

Concentric crater fill, a distinctive martian landform represented by a concentric pattern of surface undulations confined within a crater rim, has been interpreted as an example of ice-enhanced regolith creep at midlatitudes (e.g., Squyres and Carr, 1986). Theoretical constraints on the stability and mobility of ground ice limit the applicability of an ice-rich soil in effectively mobilizing downslope movement at latitudes poleward of + or - 30 deg, where concentric crater fill is observed. High-resolution images of concentric crater fill material in the Utopia Planitia region (45 deg N, 271 deg W) show it to be an eroded, multiple-layer deposit. Layering should not be preserved if the crater fill material moved by slow deformation throughout its thickness, as envisioned in the ice-enhanced creep model. Multiple layers are also exposed in the plains material surrounding the craters, indicating a recurrent depositional process that was at least regional in extent. Mantling layers are observed in high-resolution images of many other locations around Mars, suggesting that deposition occurred on a global scale and was not limited to the Utopia Planitia region. It is suggested that an aeolian interpretation for the origin and modification of concentric crater fill material is most consistent with morphologic and theoretical constraints.

Zimbelman, J. R.↗