Search NASA⌕ Search

SEARCH · Search NASA

Results for “CTM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

132 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Structural Architectures for Self-Erecting Lunar Towers

The load carrying performance for deployable lunar tower architectures utilizing thin-ply composite booms are parametrically evaluated in this paper. These self-erecting towers support a communications and sensor platform on the lunar surface. The primary design consists of the Corrugated Rollable Tubular Boom (COROTUB) acting as the primary mast of the tower which supports the payload tip mass. Guy wires connecting the boom tip to spreader bars attached at the base deployer serve to correct any lateral eccentricities and provide dimensional stability. The analysis compares the maximum tip mass that this primary design can carry relative to a reference design that does not contain any guy wires or spreader bars. The results provide insights into whether the additional system mass and complexity associated with the cable-stayed design is worth the increased payload mass that can be supported. By setting the design limiting condition to a nominal maximum allowable deflection, the analysis reveals that primary design outperforms reference design for the majority of the design space. This outcome is found to be the case when the spreader bar length relative to the tower height exceeds a critical value. The analysis is extended to lunar towers with Collapsible Tubular Mast (CTM) booms, and similar trends are observed.

Jacob G Daye↗
NASA NTRSDate not supplied

Faster Tropical Upper Stratospheric Upwelling is Driving Changes in Ozone Chemistry

Trends in N2O and the chlorofluorocarbons (CFCs) cause trends in O3 through changes in their reactive product gases, NOx and ClOx, but transport plays an important role because it controls the distribution of the long‐lived source gases that produce ozone‐destroying radicals. In this study we show that increased tropical upwelling 10‐5 hPa from 2013‐2021 has changed upper stratospheric (UpS) composition and shifted the balance of O3 loss processes. We use N2O, HNO3, NOx, temperature and O3 data from the Aura Microwave Limb Sounder (MLS) and the SCI‐Sat Atmospheric Chemistry Experiment Fourier Transport Spectrometer (ACE‐FTS) over a 16‐year period to show how changes in reactive nitrogen species affected gas phase ozone chemistry above 30 hPa between June 2013‐May 2021 compared to the previous 8 years, June 2005‐May 2013. We use 2 simulations of the Global Modeling Initiative (GMI) chemistry transport model (CTM), with and without time varying MERRA2 meteorology, to understand how dynamical changes during this 16‐yr period affected O3 through changes in loss via the NOx and ClOx cycles. We also identify the role that the quasi‐biennial oscillation (QBO) in tropical zonal winds plays in the UpS composition changes. We find large increases in tropical upwelling and poleward transport in the northern branch of the UpS transport circulation since 2013 that dramatically increased the abundance of the N2O and its odd nitrogen product gases, NOx and HNO3. O3 loss by NOx in the Arctic UpS increased due to dynamically driven composition change, explaining the observed weak O3 recovery in that region since 2005. The increased upwelling also drove decreases in tropical NOx, leading to increased tropical O3 from 12‐6 hPa.

middle atmosphere chemistry and composition↗
NASA NTRSDate not supplied

Forecasted Climate Penalties to Surface Ozone Across the 21st Century

Future climate change may bring local benefits or penalties to surface ozone pollution, resulting from changing temperature, precipitation, and transport patterns, as well as climate-sensitive natural precursor emissions. Here, we estimate climate penalty and benefits at the end of this century using version 2.0 of the Global Change and Air Pollution (GCAP 2.0) model framework, a one-way offline coupling between version E2.1 of the NASA Goddard Institute for Space Studies (GISS) general circulation model (GCM) and the GEOS-Chem global 3-D chemical-transport model (CTM). We archive meteorology for driving GEOS-Chem from the E2.1 contributions to Phase 6 of the Coupled Model Intercomparison Project (CMIP6) for the present day (2005-2014 C.E.) and end-of-the 21st century (2090-2099 C.E.). Emissions and boundary conditions used for input to GEOS-Chem are consistent with the CMIP6 experimental design. We apply the model to isolate the impact of forecasted anthropogenic precursor emission changes versus climate-only driven changes on surface ozone for warming limited to 1.9 W m-2 versus 8.5 W m-2 above preindustrial levels. We find a global climate penalty of 47 (16-77) thousand additional deaths due to surface ozone at the end of the century in the extreme warming scenario, but only 13 (4-21) thousand additional deaths in the extreme mitigation scenario. Similarly, the extreme warming scenario is associated with a 40 % increase in economic losses due to crop damage from climate-only changes in surface ozone, but only an 8 % increase in the extreme mitigation scenario. The simulated climate penalties to surface ozone are most severe in South and East Asia.

Climate penalties↗
NASA NTRS2023

Decoupling in the Vertical Shape of HCHO During a Sea Breeze Event: the Effect on Trace Gas Satellite Retrievals and Column-to-Surface Translation

The effect of sea breeze circulation on stratification of the vertical formaldehyde (HCHO) concentration vertical profiles is explored using a regional atmospheric chemical transport model (CTM) for three synoptically stagnant days focused on the east coast of the U.S in June 2018. During this event, a significant thermal contrast between the Atlantic Ocean and the terrestrial regions (12–17 °C), observed by moderate resolution imaging spectroradiometer (MODIS) and well-captured by the WRF-CMAQ model (15–18 °C), is conducive to monsoon-like flow, perpendicular to the shorelines, carrying clean marine air masses over the land within a few hundreds of meters above the surface. In contrast, the westerly continental polluted air masses prevail in higher altitudes. These two conflicting flows result in atypical vertical shapes of HCHO concentrations increasing with altitude. This decoupling pattern is so pronounced that we observe total column HCHO negatively correlate with surface concentrations. Comparisons of an accredited global model, GEOS-CF, to surface wind measurements and MODIS skin temperature indicate its poor representation of the sea breeze timing and strength, resulting in GEOS-CF HCHO vertical shapes being drastically different from the WRF-CMAQ. Based on radiative transfer calculations, the differences in the vertical distribution of HCHO between the WRF-CMAQ and that of GEOS-CF in the first 3 km are sufficient to induce a 20–30% error in air mass factors (thus total vertical HCHO column abundances). Through an experiment involving converting HCHO total columns to surface mixing ratios, we demonstrate that GEOS-CF allocates noticeably more HCHO molecules (40–150%) to the surface layer due to the misrepresentation of the vertical shape of HCHO during the sea breeze event. It is known that a significant fraction of the human population lives in coastal areas prone to detrimental effects caused by air pollution, and elevated pollutant concentrations usually occur in synoptically stagnant atmospheric conditions when local circulation patterns come into play; accordingly, our experiments emphasize the importance of the effect a priori profiles can have on satellite-derived applications under such conditions. To ensure that the quantitative representation of satellite-based trace gas retrievals on a daily basis is trustworthy and useable for air quality applications, atmospheric models providing a priori profiles for satellite retrievals should be well-tuned to reproduce complex local circulation such as sea-land breezes.

sea breeze↗
NASA NTRS2012

Revisions to Photochemical Data for Use in Atmospheric Modeling

Solar and stellar flux incident on an atmosphere can cause molecules to dissociate into highly reactive species and allows for photochemical processes to play a fundamental role in atmospheric chemistry. While models have tried to simulate such processes, they are extremely sensitive to photoabsorption cross-sections and quantum yields: two parameters that are important in determining the photodissociation rate, and hence the lifetime, of atmospheric compounds. Obtaining high-resolution and current data for these parameters is therefore highly desirable. Due to this, database and literature searches for high-quality cross-sections and quantum yields were performed and compiled for KINETICS, a Caltech/JPL Chemical Transport Model that can be used in modeling planetary atmospheres. Furthermore, photodissociation rates determined by running a Titan 1-D model were used to verify the completeness of these latest revisions.

Chemical Transport Model (CTM)↗
NASA NTRS2019

Constraining global aerosol emissions using POLDER/PARASOL satellite remote sensing observations

We invert global black carbon (BC), organic carbon (OC) and desert dust (DD) aerosol emissions from POLDER/PARASOL spectral aerosol optical depth (AOD) and aerosol absorption optical depth (AAOD) using the GEOS-Chem inverse modeling framework. Our inverse modeling framework uses standard a priori emissions to provide a posteriori emissions that are constrained by POLDER/PARASOL AODs and AAODs. The following global emission values were retrieved for the three aerosol components: 18.4 Tg/yr for BC, 109.9 Tg/yr for OC and 731.6 Tg/yr for DD for the year 2010. These values show a difference of +166.7 %, +184.0 % and −42.4 %, respectively, with respect to the a priori values of emission inventories used in “standard” GEOS-Chem runs. The model simulations using a posteriori emissions (i.e., retrieved emissions) provide values of 0.119 for global mean AOD and 0.0071 for AAOD at 550 nm, which are +13.3 % and +82.1 %, respectively, higher than the AOD and AAOD obtained using the a priori values of emissions. Additionally, the a posteriori model simulation of AOD, AAOD, single scattering albedo, Ångström exponent and absorption Ångström exponent show better agreement with independent AERONET, MODIS and OMI measurements than the a priori simulation. Thus, this study suggests that using satellite-constrained global aerosol emissions in aerosol transport models can improve the accuracy of simulated global aerosol properties.

chemical transport model (CTM) simulations↗