SEARCH · Search NASA

Results for “Chemical Fractionation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Structural Phase Transitions in the van der Waals Ferromagnets Fe x Pd y Te 2

Two-dimensional van der Waals (vdW) magnets are attracting significant attention, both as platforms for studying fundamental magnetic interactions and for the exciting possibility of utilizing them as building blocks in devices and heterostructures, which may lead to new physical phenomena and functionalities. Here, we provide a detailed study of the crystal structure and physical properties of the recently discovered vdW ferromagnet FePd 2 Te 2 . We find this compound has a relatively wide width of formation, and grow single crystals with compositions Fe x Pd y Te 2 where x ranges from 0.9 to 1.1 and y from 1.8 to 2.5, respectively. Temperature-dependent X-ray diffraction and transport measurements reveal that a first-order structural transition occurs in the range of T = 360–420 K, where the critical temperature, modulation wave vector, and corresponding room-temperature crystal structures all depend on chemical composition. Above the transition, the compounds with Pd fraction y > 2 adopt a disordered derivative of the tetragonal FeTe structure, with the Fe layer showing mixed Fe/Pd occupancy and the extra Pd atoms partially occupying interstitial sites. Below 370 K, the structure is incommensurately modulated, likely associated with the complex ordering of Pd/Fe atoms in the metal layers or the interstitial Pd in the vdW gaps. For y < 2, the composition Fe 1.1 Pd 1.8 Te 2 has monoclinic symmetry at room temperature that is consistent with the reported structure of FePd 2 Te 2 . This phase undergoes a structural transition at 420 K for which the high temperature structure is yet to be determined; however, based on the similarities with the y > 2 compounds, we speculate that its T > 420 K structure is also tetragonal. Importantly, the high temperature, symmetry-breaking structural transition observed here provides a likely explanation for the origin of the structural domains previously observed in FePd 2 Te 2 . All compounds investigated in the Fe x Pd y Te 2 series show metallic behavior, with magnetic characterization indicating that they are easy-plane, hard, ferromagnets with T C spanning 98–180 K. Both the critical temperature for the structural transition and the Curie temperature are moderately suppressed with increasing Pd fraction y and corresponding decreasing Fe fraction x, indicating that synthetic control over x and y paves way for the further exploration of these compounds.

crystal structure↗

DOE OSTI2023

Post-Hydration Crosslinking of Ion Exchange Membranes to Control Water Content

The utilization of crosslinking as a technique to limit excess water uptake in ion exchange membranes is a well-established approach. However, traditional methods involve performing the crosslinking reaction before the membrane self-segregates into hydrophilic and hydrophobic domains upon exposure to water. In this study, we employ numerical and molecular simulations to explore the potential of post-hydration crosslinking of the polymer at subsaturated conditions. This process allows for the development of a nanosegregated morphology, which establishes well-connected but narrow water channels, while limiting additional sorption of water. The significant reduction in membrane swelling observed in our study indicates that post-hydration crosslinking could be a promising approach to regulate water uptake in ion exchange membranes. Here based on our analyses, we propose chemical crosslinking strategies that may yield high membrane gel fractions.

36 MATERIALS SCIENCE↗

DOE OSTI2020

An Experimental and Theoretical Study of the High Temperature Reactions of the Four Butyl Radical Isomers

The high temperature gas phase chemistry of the four butyl radical isomers (n-butyl,sec-butyl, iso-butyl, andtert-butyl) was investigated in a combined experimental and theoretical study. Organic nitrites were used as convenient and clean sources of each of the butyl radical isomers. Rate coefficients for dissociation of each nitrite were obtained experimentally and are at, or close to, the high pressure limit. Low pressure experiments were performed in a diaphragmless shock tube with laser schlieren densitometry at post-shock pressures of 65, 130, and 260 Torr and post-shock temperatures of 700-1000 K. Additional experiments were conducted with iso-butyl radicals at 805 K and 8.7 bar to elucidate changes in mechanism at higher pressures. These experiments were performed in a miniature shock tube with synchrotron-based photoionization mass spectrometry. The mass spectra confirmed that scission of the O-NO bond is the primary channel by which the precursors dissociate, but they also provided evidence of a minor channel (<7.7%) through HNO loss and formation of an aldehyde. These high pressure experiments were also used to determine the disproportionation/recombination ratio for iso-butyl radicals as 0.3. Reanalysis of the lower-temperature literature and the present data yielded rate constants for the disproportionation reaction, iso-butyl + iso-butyl = iso-butene + iso-butane. A chemical kinetics model was developed for the reactions of the butyl isomers that included new paths for highly energized adducts. These adducts are formed by the addition of H, CH 3 or C 2 H 5 to the butyl radicals. Accompanying theoretical investigations show that chemically activated pathways are competitive with stabilization of the adduct by collision under the conditions of the laser schlieren experiments. These calculations also show that at 10 bar and T< 1000 K stabilization is the only important reaction, but at higher temperatures, even at 10 bar, chemically activated product channels should also be considered. Branching fractions and rate coefficients are presented for these reactions. Furthermore, this study also highlights the importance of the radical structure for determining branching ratios for disproportionation and recombination of alkyl radicals, and these were facilitated by theoretical calculations of recombination rate coefficients for the four butyl radical isomers. Overall, the results reveal previously unknown features of butyl radical chemistry under conditions that are relevant to a wide range of applications and reaction mechanisms are presented that incorporate pressure dependent rate coefficients for the key steps.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Microstructure of amide-functionalized polyethylenes determined by NMR relaxometry

Amidation of polyethylenes creates a range of amide-containing materials with enhanced properties, but the effect of these functional groups on the microstructure of these new materials is not known. Here we employ solid-state nuclear magnetic resonance (NMR) techniques to analyze the microstructure of amide-modified polyethylenes. While a decrease in crystallinity was observed with increasing amounts of functionalization, we found by measuring the chain mobility of the crystalline, amorphous, and interphasial regions of the polyethylenes with NMR relaxation techniques that the grafted amidyl groups partition into the rigid amorphous fraction (RAF) between the crystalline and amorphous regions. The chemical specificity of these NMR experiments creates precise assessments of the location of functional groups within the materials. Together, these insights into the microstructure and morphology of amide-containing polyethylenes lay a foundation for a deeper understanding of the structure and properties of functional polyolefins.

Haber, Shira [Lawrence Berkeley National Laborator↗

DOE OSTI2021

Quantitative 2D thermometry in turbulent sooting non-premixed flames using filtered Rayleigh scattering

This paper demonstrates the application of a thermometry method in turbulent sooting non-premixed flames using filtered Rayleigh scattering (FRS). Fuel tailoring is used to establish a specific C 2 H 2 -based fuel mixture such that temperature can be determined accurately by a single FRS measurement over the entirety of mixture fraction space, or equivalently, for all relevant thermo-chemical states. Evaluation is performed in a hierarchy of flows to establish measurement precision and accuracy. Initial assessments in a series of heated fuel mixtures; non-sooting, near-adiabatic flat flames; and laminar non-premixed sooting flames show accuracy of the approach over a full range of expected temperatures and high single-shot measurement precision (e.g., 65 < <#comment/> S N R < <#comment/> 80 ) for temperatures between 1900 and 2200 K. Subsequently, 2D temperature measurements are evaluated in a turbulent non-premixed sooting flame. For the current fuel mixture, the local mixture-averaged Rayleigh scattering cross section is nearly constant over all composition space, and thus traditional laser Rayleigh scattering (LRS) is used as a measurement standard in the absence of soot. The results show excellent agreement between the proposed FRS thermometry approach and LRS in non-sooting regions. In the presence of soot, the proposed FRS-based approach shows no signs of interference. In addition, 2D temperature imaging shows high SNR (60–74) over all temperature conditions. Thus, we believe the proposed methodology successfully provides a high-resolution 2D temperature method under turbulent sooting flame conditions.

Pu, Jinpeng↗

DOE OSTI2020

The Near-infrared Spectrum of the Nuclear Star Cluster: Looking below the Tip of the Iceberg, and Comparisons with Extragalactic Nuclei

Long-slit near-infrared (NIR) spectra of the Galactic nuclear star cluster (NSC) are discussed. The spectra sample the major axis of the NSC out to its half-light radius. The absorption spectrum of the central regions of the NSC is averaged over angular scales of tens of arc seconds in order to sample globular cluster-like total luminosities, and the results are compared with model spectra. The equivalent widths of Na i2.21 μm and Ca 2.26 μm outside of the center of the NSC, where light from nuclear bulge stars contributes a large fraction to the total flux, are consistent with solar chemical mixtures. In contrast, the equivalent widths of Na i2.21 μm and Ca i2.26 μm near the center of the NSC are larger than expected from models with solar chemical mixtures, even after light from the brightest evolved stars is removed. The depths of spectroscopic features changing along the major axis of the NSC are consistent with imaging studies that have found evidence of population gradients in the NSC. That Na i2.21 μm and Ca i2.26 μm are deeper than predicted for solar chemical mixtures over a range of evolutionary states is consistent with previous studies that find that the majority of stars near the center of the NSC formed from material that had nonsolar chemical mixtures. The depths of the Na i2.21 μm and Ca i2.26 μm features in the central regions of the NSC are comparable to those in the nuclear spectrum of the early-type Virgo disk galaxy NGC 4491, and are deeper than in the central spectra of NGC 253 and 7793. A spectrum of nebular emission and the youngest stars near the galactic center is also extracted. The equivalent widths of emission features in the extracted NIR spectrum are similar to those in the nuclear spectrum of NGC 253, and it is argued that this agreement is best achieved if the current episode of star formation near the center of the NSC has been in progress for at least a few megayears.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Assessing the Behavior of Moderately Volatile Elements on the Moon in Order to Constrain Processes of Magmatic Evolution and Planetary Accretion

Heterogeneous isotopic compositions of Zn and Ga in lunar basalts and highlands rocks indicate that secondary processing affected the stable isotopic composition of major lunar reservoirs. It follows that these fractionating processes must be identified and characterized in order to make robust estimates for the isotopic composition of the mare basalt source regions or the bulk silicate Moon (BSM). Contrary to previous assertions (e.g., Kato & Moynier, 2017), MVEs such as Zn and Ga do not behave similarly on the Moon, in line with differences in their chemical behavior and volatility. There is clear evidence that impact reworking fractionates zinc isotopes but, in addition, zinc isotopes are also highly sensitive to the formation of Ti-bearing oxides such as ilmenite. In contrast, gallium is far less susceptible to volatile reworking, but its isotopic composition is fractionated during incorporation into plagioclase (Wimpenny et al., 2022; Render et al., 2023). Based on these findings we conclude that current isotopic compositions of Zn and Ga in lunar rocks, such as those measured for the mare basalt suite, are unlikely to be representative of the bulk Moon when it accreted. As such, estimates for the MVE isotopic composition of the BSM derived from mare basalts may not be accurate, which may have implications for the incorporation of these data into dynamical models of the Moon’s formation. In the following, we discuss the main findings from this project in more detail, focusing on the behaviour of zinc and gallium isotopic systematics in lunar rocks and the processes that control their isotopic fractionation on the Moon.

58 GEOSCIENCES↗

DOE OSTI2021

Neutron diffraction study of magnetism in van der Waals layered MnBi 2n Te 3n+1

Two-dimensional van der Waals MnBi 2 n Te 3 n +1 ( n = 1, 2, 3, 4) compounds have been recently found to be intrinsic magnetic topological insulators rendering quantum anomalous Hall effect and diverse topological states. Here, we summarize and compare the crystal and magnetic structures of this family, and discuss the effects of chemical composition on their magnetism. We found that a considerable fraction of Bi occupies at the Mn sites in MnBi 2 n Te 3 n +1 ( n = 1, 2, 3, 4) while there is no detectable Mn at the non-magnetic atomic sites within the resolution of neutron diffraction experiments. The occupancy of Mn monotonically decreases with the increase of n . The polarized neutron diffraction on the representative MnBi 4 Te 7 reveals that its magnetization density is exclusively accumulated at the Mn site, in good agreement with the results from the unpolarized neutron diffraction. The defects of Bi at the Mn site naturally explain the continuously reduced saturated magnetic moments from n = 1 to n = 4. The experimentally estimated critical exponents of all the compounds generally suggest a three-dimensional character of magnetism. Our work provides material-specified structural parameters that may be useful for band structure calculations to understand the observed topological surface states and for designing quantum magnetic materials through chemical doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Morphological and Chemical Differentiation between Tunisian Populations of Pinus halepensis , Pinus brutia , and Pinus pinaster

Abstract The lipid fraction of seeds from different pine species and populations was studied regarding total lipid content, fatty acid profile and vitamin E composition. The investigated seeds contained a high percentage of lipid (13.6 to 31.5 %). Lipid fractions were found to be rich in vitamin E, which varied significantly among species and populations. P. halepensis (Ph−Hn) showed the highest content of vitamin E (256.3 mg/kg of seeds) and the uppermost content of α ‐tocopherol (44 mg/kg). However, P. halepensis (Ph−Kas) was the richest in γ ‐tocopherol (204.9 mg/kg). Lipid fractions had a low content of δ ‐tocopherol (1.2 to 3.6 mg/kg. The highest content of γ ‐tocotrienol (∼18 %) was determined for P. halepensis (Ph−Dc and Ph−Hn). Thirteen fatty acids were identified by GC‐FID with significant variation between the investigated species. The linoleic acid was the major fatty acid followed by oleic acid and palmitic acid. The chemical differentiation among species for the composition of fatty acids and vitamin E was confirmed by PCA. Significant correlations were observed between the content of vitamin E and fatty acids and ecological parameters of P. halepensis populations.

Khouja, Mariem↗

DOE OSTI2025

Membrane Thickness Impact on Chemical Degradation Rates

Abstract A comprehensive investigation of PFSA membrane chemical degradation rates as a function of thickness (8-20 µm) is reported. The two-pronged study was conducted on bare membranes and as components of chemically-mitigated and mechanically-reinforced, state-of-the-art (SOA) membrane electrode assemblies (MEAs). The bare membranes were subjected to H2O2 vapor test and MEAs were degraded under OCV conditions, both at 90°C. Both test types employed fluoride release rates (FRR) to monitor chemical degradation rates. Vapor tests revealed that area-specific degradation rates were positively correlated with membrane thickness, but thickness normalized degradation rates were independent of thickness. Open-circuit voltage (OCV) investigations spanning the membrane thickness series of MEAs was probed via a 27-experiment 3(4-1) fractional factorial experimental design. Statistical analysis of the FRR values revealed that chemical degradation rates were dominated by the relative humidity value and that the area-specific degradation rates of MEAs were independent of membrane thickness. The OCV chemical durability insensitivity to membrane thickness is supported by on-load membrane chemical durability studies at the stack level. The results suggest that ,despite smaller ionomer inventory, SOA thin membranes and MEAs are not greatly disadvantaged relative to thicker membranes from a chemical durability perspective, provided oxidative stress levels are controlled throughout application lifetime.

Coms, Frank D. (ORCID:0000000249160350)↗

DOE OSTI2021

Separations Consortium: Lignin Rich Stream Fractionation and Purification

In support of the Bioenergy Technologies Office in converting lignin to fuels and chemicals, this project develops scalable separations based on membranes and Electordeionization (EDI) to recover low molecular weight (LMW) compounds from lignin rich streams. The project addresses three technology barriers in developing the bioeconomy; (1) Cost of production (2) Selective separation of organic acid species, and (3) Advanced bioprocess development. Specifically, membrane cascades using Tangential Flow Filtration (TFF) are investigated for the recovery of LMW lignin compounds from lignin rich streams such as Alkaline Pretreatment Liquor (APL), Reductive Catalytic Fractionation (RCF) oil, and Catalytic Oxidation oil. Process concepts, including dynamic filtration, are investigated to meet specific performance targets indicated by the consortium's Industrial Advisory Board for the membrane filtration including maintaining permeance > 1 LMH/bar and an overall cost target of < $1/kg of LMW lignin. EDI is investigated as an integral part of the membrane cascade to recover LMW aromatic acids and as an alternative to nanofiltration. Economic analysis of the processes is presented with a focus on minimizing energy consumption and capital expenditure. Furthermore, a sensitivity analysis is presented to identify key cost drivers and optimize holistic process operating conditions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2025

Particle composition measurements for ultrafine particles collected at the EPCAPE Mount Soledad site from 04-27-2023 to 06-13-2023 using a Thermal Desorption Chemical Ionization Mass Spectrometer

The dataset contains particle composition data for both the positive and negative reagent ion modes of the Thermal Desorption Chemical Ionization Mass Spectrometer (TDCIMS). The dataset is split into two directories: one for particles with diameters of 30 nm and the other for particles with diameters of less than 100 nm. The positive reagent ion mode uses H3O+ as the reagent ion, and ionization usually occurs through hydrogen addition. The negative mode uses O2- as the reagent ion. Negative mode ionization generally occurs through hydrogen abstraction, but O2- addition is also possible. Ion concentrations were normalized to total ion counts, and unknown ions were then removed from the data. The name of each ion fraction time series includes the mass to charge ratio and the chemical formula for the ion. Time is recorded in seconds since 1/1/1904. The time zone is UTC.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

High spatial resolution charge sensing of quantum Hall states

Charge distribution offers a unique fingerprint of important properties of electronic systems, including dielectric response, charge ordering, and charge fractionalization. Here, we develop an architecture for charge sensing in two-dimensional electronic systems in a strong magnetic field. We probe local change of the chemical potential in a proximitized detector layer using scanning tunneling microscopy, allowing us to infer the chemical potential and the charge profile in the sample. Our technique has both high energy (<0.3 meV) and spatial (<10 nm) resolution exceeding that of previous studies by an order of magnitude. We apply our technique to study the chemical potential of quantum Hall liquids in monolayer graphene under high magnetic fields and their responses to charge impurities. The chemical potential measurement provides a local probe of the thermodynamic gap of quantum Hall ferromagnets and fractional quantum Hall states. The screening charge profile reveals spatially oscillatory response of the quantum Hall liquids to charge impurities and is consistent with the composite Fermi liquid picture close to the half-filling. Our technique also paves the way to map moiré potentials, probe Wigner crystals, and investigate fractional charges in quantum Hall and Chern insulators.

charge sensing↗

DOE OSTI2021

Effective Biomass Fractionation through Oxygen-Enhanced Alkaline-Oxidative Pretreatment

The high recalcitrance of plant cell walls is an obstacle for effective chemical or biological conversion into renewable chemicals and transportation fuels. Here, we investigated the utilization of both oxygen (O 2 ) and hydrogen peroxide (H 2 O 2 ) as co-oxidants during alkalineoxidative pretreatment to improve biomass fractionation and increase enzymatic digestibility. The oxidative pretreatment of hybrid poplar was studied over a variety of conditions. Employing O 2 in addition to H 2 O 2 as a co-oxidant during the two-stage alkaline pre-extraction/coppercatalyzed alkaline hydrogen peroxide (Cu-AHP) pretreatment process resulted in a substantial improvement in delignification relative to using H 2 O 2 alone during the second-stage Cu-AHP pretreatment, leading to high overall sugar yields even at H 2 O 2 loadings as low as 2% (w/w of original biomass). The presence of H 2 O 2 , however, was both critical and synergistic. Performing analogous reactions in the absence of H 2 O 2 resulted in approximately 25% less delignification and a 30% decrease in sugar yields. The lignin isolated from this dual oxidant second stage had high aliphatic hydroxyl group content and reactivity to isocyanate, indicating that it is a promising substrate for the production of polyurethanes. To test the suitability of the isolated lignin as a source of aromatic monomers, the lignin was subjected to a sequential Bobbitt’s salt oxidation followed by formic-acid catalyzed depolymerization process. Monomer yields of approximately 17% (w/w) were obtained, and the difference in yields was not significant between lignin isolated from our Cu-AHP process with and without O 2 as a co-oxidant. Thus, the addition of O 2 did not lead to significant lignin crosslinking, a result consistent with the twodimensional heteronuclear single-quantum coherence (2D HSQC) NMR spectra of the isolated lignin.

09 BIOMASS FUELS↗

DOE OSTI2026

Low Activity Waste Glass Optimization with Property Models from Machine Learning, Part 2: Experimental Validation and Active Learning

The United States Department of Energy is responsible for managing legacy nuclear waste stored in underground tanks at the Hanford Site. To treat the waste, it is planned as the current baseline to separately vitrify low-activity waste (LAW) and high-level waste fractions. Previously, machine learning (ML) based glass property models (e.g., chemical durability, viscosity, electrical conductivity and SO3 solubility) were developed with prediction uncertainties. A waste glass optimization approach was then established to enable the capability of using these ML models in LAW glass formulation. In this study, the previous ML models were first experimentally validated, and the results were incorporated back into the database to update the ML models. The updated models and formulations showed increased waste loading while reducing the failure rate, demonstrating improved predictive accuracy, reduced uncertainties, and the effectiveness of active learning in guiding high-dimensional, nonlinear LAW glass design. This represents the first experimental validation of ML based LAW glass formulation, with practical benefits such as higher waste loading, shorter mission duration, and lower operational risk.

Lu, Xiaonan (ORCID:0000000179708148)↗

DOE OSTI2021

Cloud condensation nuclei characteristics at the Southern Great Plains site: role of particle size distribution and aerosol hygroscopicity

The activation ability of aerosols as cloud condensation nuclei (CCN) is crucial in climate and hydrological cycle studies, but their properties are not well known. We investigated the long-term measurements of atmospheric aerosol properties, CCN concentrations (N CCN ) at supersaturation (SS = 0.1%–1.0%), and hygroscopicity at the Department of Energy's Southern Great Plains (SGP) site to illustrate the dependence of N CCN on aerosol properties and transport pathways. Cluster analysis was applied to the back trajectories of air masses to investigate their respective source regions. The results showed that aged biomass burning aerosols from Central America were characterized by higher accumulation mode particles (N accu ; median value 805 cm -3 ) and relatively high aerosol hygroscopicity (κ; median value ~0.25) values that result in the higher CCN activation and relatively high N CCN (median value 258–1578 cm -3 at a SS of 0.1%–1.0%). Aerosols from the Gulf of Mexico were characterized by higher N accu (~35%), and N CCN (230–1721 cm -3 at a SS of 0.1%–1.0%) with the lowest κ (~0.17). In contrast, relatively high nucleation mode particles (N nucl ; ~20%) and low N CCN (128–1553 cm -3 at a SS of 0.1%–1.0%) with higher κ (~0.30) values were observed on the aerosols associated with a westerly wind. The results indicate particle size as the most critical factor influencing the ability of aerosols to activate, whereas the effect of chemical composition was secondary. Our CCN closure analysis suggests that chemical composition and mixing state information are more crucial at lower SS, whereas at higher SS, most particles become activated regardless of their chemical composition and size. This study affirms that soluble organic fraction information is required at higher SS for better N CCN prediction, but both the soluble organics fraction and mixing state are vital to reduce the N CCN prediction uncertainty at lower SS.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Enhancing superconductivity of Y 5 Rh 6 Sn 18 by atomic disorder

Here, we investigate the effect of enhancement of superconducting transition temperature $T_c$ by nonmagnetic atom disorder in the filled skutterudite-related tetragonal Y 5 Rh 6 Sn 18 compound doped with Ca. We documented experimentally that Y 5 Rh 6 Sn 18 and its Ca-doped alloys are electronically inhomogeneous at the nanoscale, when Ca content is smaller than ~1.5 in the Y 5– x Ca x Rh 6 Sn 18 system, while for $\textit{x}$ ≥ 1.5 much stronger chemical phase inhomogeneity is observed with an about 20% volume fraction of the second 3:4:13 cubic phase, which we interpret as a fluctuation of stoichiometry within the bulk sample. Then the enhancement of $T_c$ vs $\textit{x}$ could be modeled by a mechanism proposed in recent theoretical reports for increasing the mean-field transition temperature $T_c$ in the presence of nonmagnetic disorder. The increase in disorder with doping increases the sample inhomogeneity and causes a systematic increase in $T_c$, while for two-phase $\textit{x}$ ≥ 1.5 samples the critical temperature $T^{\star}_c ≈ 2 × T_c$ rapidly increases. Based on band structure calculations performed under pressure, we demonstrate how the change in density of states would affect $T_c$ of Y 5 Rh 6 Sn 18 . We obtained the Grüneisen parameter $γ_G$ larger for the inhomogeneous phase with respect to $γ_G$ of the bulk $T_c$ phase and attribute the enhancement of $T_c$ to larger stiffening of the high-temperature $T^{\star}_c$ phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Large-Eddy Simulation Study of Flow and Combustion Dynamics in a Full-Scale Hydrogen–Air Rotating Detonation Combustor-Stator Integrated System

In the present work, a first-of-its-kind three-dimensional (3D) large-eddy simulation (LES) study is conducted to numerically investigate the combustion dynamics as well as aero-thermal phenomena in a full-scale nonpremixed hydrogen–air rotating detonation engine (RDE) (with a diverging-shaped lower-end wall), when integrated with nozzle guide vanes (NGV) acting as the turbine stator. The wall-modeled LES framework incorporates hydrogen–air detailed chemical kinetics and adaptive mesh refinement (AMR). A comparative analysis is carried out for two operating conditions with different fuel/air mass flow rates but global equivalence ratio of unity, and considering RDE configurations without and with stator. The LES model is validated against available experimental data for the low mass flux condition with respect to detonation wave speed/height, wave dynamics, and axial static pressure distribution. Numerical results indicate significant deflagrative combustion occurring in the fill region near the inner wall due to formation of recirculation zones in the injection near-field driven by the backward facing step. The leading detonation wave is found to be trailed by an azimuthal reflected-shock combustion (ARSC) wave, consistent with experimental observations, which consumes unburned vitiated reactants that leak through the main detonation wave. The main detonation wave characteristics, such as detonation wave speed/height and combustion efficiency, do not change appreciably with the presence of NGV. A novel combustion diagnostic technique based on chemical explosive mode analysis (CEMA) is employed to quantify the fraction of heat release occurring in the detonative mode versus deflagrative mode for the simulated conditions. The exit flow is found to be nearly fully subsonic and supersonic for the low and high mass flux conditions, respectively. Further analysis of the exit flow profiles shows that the presence of NGV renders the flow more axial and significantly impacts the exit Mach number and total pressure, while the total temperature shows negligible change. In addition, the low mass flux operating point, despite exhibiting more deflagrative losses within the combustor, yields overall lower pressure drop from plenum to exhaust, which is mainly attributed to lower pressure drop across the injectors. Lastly, the rotating detonation engine-nozzle guide vanes (RDE-NGV) configuration exhibits higher total pressure loss compared to rotating detonation engine (RDE) without stator across both the mass flux conditions. In conclusion, this study extends the state-of-the-art in numerical modeling of pressure gain combustion (PGC) systems by demonstrating high-fidelity 3D reacting LES of full-scale RDE-NGV systems relevant to RDE-turbine integration for stationary power generation.

Combustion↗