Search NASA⌕ Search

SEARCH · Search NASA

Results for “Conductive Paste”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Development of an all-metal thick film cost effective metallization system for solar cells

Improved thick film solar cell contacts for the high volume production of low cost silicon solar arrays are needed. All metal screenable pastes made from economical base metals and suitable for application to low to high conductivity silicon were examined. Silver fluoride containing copper pastes and fluorocarbon containing copper pastes were discussed. The effect of hydrogen on the adhesion of metals to silicon was investigated. A cost analysis of various paste materials is provided.

Ross, B.↗

Human response to aircraft noise

The human auditory system and the perception of sound are discussed. The major concentration is on the annnoyance response and methods for relating the physical characteristics of sound to those psychosociological attributes associated with human response. Results selected from the extensive laboratory and field research conducted on human response to aircraft noise over the past several decades are presented along with discussions of the methodology commonly used in conducting that research. Finally, some of the more common criteria, regulations, and recommended practices for the control or limitation of aircraft noise are examined in light of the research findings on human response.

Powell, Clemans A.↗

The Breadboard Project - A functioning CELSS plant growth system

The primary objective of the Breadboard Project for the next 3-4 years is to develop, integrate and operate a Controlled Ecological Life Support System (CELSS) at a one-person scale. The focus of this project over the past two years has been the development of the plant growth facility, the first module of the CELSS. The other major modules, food preparation, biomass processing, and resource recovery, have been researched at the laboratory scale during the past two years and facilities are currently under construction to scale-up these modules to an operational state. This paper will outline the design requirements for the Biomass Production Chamber (BPC), the plant growth facility for the project, and the control and monitoring subsystems which operate the chamber and will present results from both engineering and biological tests of the facility. Three production evaluations of wheat, conducted in the BPC during the past year, will be described and the data generated from these tests discussed.

Knott, W. M.↗

General Public Space Travel and Tourism: Executive Summary - Volume 1

Travel and tourism is one of the world's largest businesses. Its gross revenues exceed $400 billion per year in the U.S. alone, and it is our second largest employer. U.S. private sector business revenues in the space information area now approximate $10 billion per year, and are increasing rapidly. Not so in the human spaceflight area. After spending $100s of billions (1998 dollars) in public funds thereon, and continuing to spend over $5 billion per year, the government is still the only customer for human spaceflight goods and services. Serious and detailed consideration was first given to the possibility of space being opened up to trips by the general public three decades ago, and some initial attempts to do so were made a dozen years ago. But the difficulties were great and the Challenger disaster put an end to them. In recent years professional space tourism studies have been conducted in the United Kingdom, Germany and, especially, Japan. In the U.S., technological progress has been pronounced; we have had nearly a decade's experience in seeing our astronauts travel to-from low Earth orbit (LEO) safely, and we expect to commence assembly of a LEO space station housing a half-dozen people this year. Too, NASA and our space industry now have new and promising space transportation development programs underway, especially the X-33 and X-34 programs, and some related, further generation, basic technology development programs. And five private companies are also working on the design of new surface - LEO vehicles. The first professional space tourism market studies have been conducted in several countries in the past few years, especially in Japan and here. The U.S. study makes it clear that, conceptually, tens of millions of us would like to take a trip to space if we could do so with reasonable safety, comfort and reliability, and at an acceptable price. Initial businesses will address the desires of those willing to pay a greater price and accept a greater risk. A two-year cooperative Space Act agreement study has been conducted by our National Aeronautics and Space Administration and the Space Transportation Association. It was conducted by NASA and STA study leaders drawing upon the competence, experience and hard-nosed imagination of a national Steering Group and scores of attendees at a multi-day Workshop. The study has involved scores of professionals and business people from various areas: astronauts; space booster technology and operations professionals; a hotel architect and a hotel operator; an airline planner; insurance underwriters; space sickness experts; space theme park designers; space and travel and tourism association and business executives; a space-related financier; university tourism and space policy experts; present and former space-responsible government officials; space entrepreneurs; space writers; This study concludes that serious national attention should now be given to activities that would enable the expansion of today's terrestrial space tourism businesses, and the creation of in-space travel and tourism businesses. Indeed, it concludes that, in time, it should become a very important part of our Country's overall commercial and civil space business-program structure.

ONeil, Daniel↗

Measurements of noise produced by flow past lifting surfaces

Wind tunnel studies have been conducted to determine the specific locations of aerodynamic noise production within the flow field about various lifting-surface configurations. The models tested included low aspect ratio shapes intended to represent aircraft flaps, a finite aspect ratio NACA 0012 wing, and a multi-element wing section consisting of a main section, a leading edge flap, and dual trailing edge flaps. Turbulence was induced on the models by surface roughness. Lift and drag were measured for the flap models. Hot-wire anemometry was used for study of the flap-model vortex roll-up. Apparent noise source distributions were measured by use of a directional microphone system, located outside the tunnel, which was scanned about the flow region to be analyzed under computer control. These distributions exhibited a diversity of pattern, suggesting that several flow processes are important to lifting-surface noise production. Speculation concerning these processes is offered.

Kendall, J. M.↗

Control of separated flow past a cylinder using tangential wall jet blowing

A theoretical analysis is conducted to study the effect of a tangential wall jet on the control of two dimensional separated flow past a circular cylinder. For a tangential wall jet, the mathematical model derived previously is used and the vortex cloud method is adopted for the calculation of the external flow field. For certain limiting cases, the governing equations are simplified and closed forms of solutions for the wall jet parameters can be obtained. It is observed that the wall jet is very efficient in reducing drag by delaying the separation point in the range of small blowing strength. The suction force induced by the wall jet is negligible to the drag due to the external stream. However this suction increases the drag when the blowing strength is large.

Oh, Sejong↗

Thermostructural Properties Of Sic/Sic Panels With 2.5d And 3d Fiber Architectures

CMC hot-section components in advanced engines for power and propulsion will typically require high cracking strength, high ultimate strength and strain, high creep- rupture resistance, and high thermal conductivity in all directions. In the past, NASA has demonstrated fabrication of a variety of SiC/SiC flat panels and round tubes with various 2D fiber architectures using the high-modulus high-performance Sylramic-iBN Sic fiber and Sic-based matrices derived by CVI, MI, and/or PIP processes. The thermo- mechanical properties of these CMC have shown state-of-the-art performance, but primarily in the in-plane directions. Currently NASA is extending the thermostructural capability of these SiC/SiC systems in the thru-thickness direction by using various 2.5D and 3D fiber architectures. NASA is also using specially designed fabrication steps to optimize the properties of the BN-based interphase and Sic-based matrices. In this study, Sylramic-iBN/SiC panels with 2D plain weave, 2.5D satin weave, 2.5D ply-to-ply interlock weave, and 3D angle interlock fiber architectures, all woven at AITI, were fabricated using matrix densification routes previously established between NASA and GEPSC for CVI-MI processes and between NASA and Starfire-Systems for PIP processes. Introduction of the 2.5 D fiber architecture along with an improved matrix process was found to increase inter-laminar tensile strength from 1.5 -2 to 3 - 4 ksi and thru-thickness thermal conductivity from 15-20 to 30-35 BTU/ft.hr.F with minimal reduction in in-plane strength and creep-rupture properties. Such improvements should reduce thermal stresses and increase the thermostructural operating envelope for SiC/SiC engine components. These results are analyzed to offer general guidelines for selecting fiber architectures and constituent processes for high-performance SiC/SiC engine components.

Yun, H. M.↗

Percolation effect in thick film superconductors: Using a Bi(Pb)SrCaCuO based paste to prepare a superconducting planar transformer

A thick film superconductor paste has been developed to study the properties of granulated superconductor materials, to observe the percolation effect and to confirm the theory of the conducting mechanism in the superconducting thick films. This paste was also applied to make a superconducting planar transformer. Due to the T(sub c) and advantageous current density properties the base of the past was chosen to be of Bi(Pb)SrCaCu) system. For contacts a conventional Ag/Pt paste was used. The critical temperature of the samples were between 110 K and 115 K depending on the printed layer thickness. The critical current density -at the boiling temperature of the liquid He- was between 200 - 300 A/sq cm. The R(T) and V(I) functions were measured with different parameters. The results of the measurements have confirmed the theory of conducting mechanism in the material. The percolation structure model has been built and described. As an application, a superconducting planar thick film transformer was planned and produced. Ten windings of the transformer were printed on one side of the alumina substrate and one winding was printed on the other side. The coupling between the two sides was possible through the substrate. The samples did not need special drying and firing parameters. After the preparation, the properties of the transformer were measured. The efficiency ans the losses were determined. Finally, some fundamental advantages and problems of the process were discussed.

Sali, Robert↗

NASA Glenn's Contributions to Aircraft Engine Noise Research

This report reviews all engine noise research conducted at the NASA Glenn Research Center over the past 70 years. This report includes a historical perspective of the Center and the facilities used to conduct the research. Major noise research programs are highlighted to show their impact on industry and on the development of aircraft noise reduction technology. Noise reduction trends are discussed, and future aircraft concepts are presented. Since the 1960s, research results show that the average perceived noise level has been reduced by about 20 decibels (dB). Studies also show that, depending on the size of the airport, the aircraft fleet mix, and the actual growth in air travel, another 15 to 17 dB reduction will be required to achieve NASA's long-term goal of providing technologies to limit objectionable noise to the boundaries of an average airport.

Huff, Dennis L.↗

NASA Glenn's Contributions to Aircraft Engine Noise Research

This presentation reviews engine noise research conducted at the NASA Glenn Research Center over the past 70 years. This report includes a historical perspective of the Center and the facilities used to conduct the research. Major noise research programs are highlighted to show their impact on industry and on the development of aircraft noise reduction technology. Noise reduction trends are discussed, and future aircraft concepts are presented. Since the 1960s, research results show that the average perceived noise level has been reduced by about 20 decibels (dB). Studies also show that, depending on the size of the airport, the aircraft fleet mix, and the actual growth in air travel, another 15 to 17 dB reduction will be required to achieve NASAs long-term goal of providing technologies to limit objectionable noise to the boundaries of an average airport.

Engine Noise↗

The lift-fan powered-lift aircraft concept: Lessons learned

This is one of a series of reports on the lessons learned from past research related to lift-fan aircraft concepts. An extensive review is presented of the many lift-fan aircraft design studies conducted by both government and industry over the past 45 years. Mission applications and design integration including discussions on manifolding hot gas generators, hot gas dusting, and energy transfer control are addressed. Past lift-fan evaluations of the Avrocar are discussed. Lessons learned from these past efforts are identified.

Deckert, Wallace H.↗

Remote sensing in Michigan for land resource management: Waterfowl habitat management at Pointe Mouillee

For many years the Pointe Mouillee State Game Area, located on the Lake Erie shoreline just south of Detroit, has been a prime waterfowl habitat. The usefulness of the site for this purpose has been impaired because of the gradual deterioration of the marshland and severe flooding and storms during the spring of 1973. Also, it has been proposed that a dredge spoils area be located in or near the marsh. To aid the future management of a diked refuge area of 148 hectares within the State Game Area, a detailed vegetation inventory was prepared by photointerpretation and a generalized vegetation inventory was obtained by processing multispectral scanner imagery. Also, an analysis was conducted to determine the magnitude of past losses of marshland and the possibilities of replacing this lost habitat. The analysis indicated that large additions to waterfowl habitat could be provided by changes in management of vegetation in existing sections of the State Game Area, through acquisition and conversion of adjacent land by the Michigan Department of Natural Resources, and by the proposed construction of a barrier dike offshore of Pointe Mouillee. Altogether, the various measures considered in this report could affect a total area of nearly 13 sq. km.

Sellman, A. N.↗

Coulomb collisions of ring current particles: Indirect source of heat for the ionosphere

The additional energy requirements of the topside ionosphere during a magnetic storm are less than one quarter of the ring current energy. This energy is supplied largely by Coulomb collisions of ring current protons of energy less than about 20 keV with background thermal electrons which conduct the heat to the ionosphere. Past criticisms are discussed of this mechanism for the supply of energy to the SAR-arc and neighboring regions of the ionosphere.

Cole, K. D.↗

An experimental investigation of supersonic flow past a wedge-cylinder configuration

An experimental investigation of supersonic flow past double-wedge configurations was conducted. Over the range of geometries tested, it was found that, while theoretical solutions both for a Type V pattern and for a Type VI pattern could be generated for a particular flow condition (as defined by the geometry and the free-stream conditions), the weaker, Type VI pattern was observed experimentally. More rigorous flow-field solutions were developed for the flow along the wing leading-edge. Solutions were developed for the three-dimensional flow in the plane of symmetry of a swept cylinder (which represented the wing leading-edge) which was mounted on a wedge (which generated the "bow" shock wave). A numerical code was developed using integral techniques to calculate the flow in the shock layer upstream of the interaction region (i.e., near the wing root). Heat transfer rates were calculated for various free stream conditions. The present investigation was undertaken to examine the effects of crossflow on the resultant flow-field and to verify the flow model used in theoretical calculations.

Barnette, D. W.↗

Thick-film materials for silicon photovoltaic cell manufacture

Thick film technology is applicable to three areas of silicon solar cell fabrication; metallization, junction formation, and coating for protection of screened ohmic contacts, particularly wrap around contacts, interconnection and environmental protection. Both material and process parameters were investigated. Printed ohmic contacts on n- and p-type silicon are very sensitive to the processing parameters of firing time, temperature, and atmosphere. Wrap around contacts are easily achieved by first printing and firing a dielectric over the edge and subsequently applying a low firing temperature conductor. Interconnection of cells into arrays can be achieved by printing and cofiring thick film metal pastes, soldering, or with heat curing conductive epoxies on low cost substrates. Printed (thick) film vitreous protection coatings do not yet offer sufficient optical uniformity and transparency for use on silicon. A sprayed, heat curable SiO2 based resin shows promise of providing both optical matching and environmental protection.

Field, M. B.↗

Effects of surface perturbations on the asymmetric vortex flow over a slender body

An experimental investigation of the effects of surface perturbations on the asymmetric flow past a slender body has been conducted for laminar flow conditions. Beads with diameters ranging from 3/32 to 12/32 in. were attached near the apex of a cone/cylinder model having a base diameter of 3.5 in. and a cone semiapex angle of 9 deg at an angle of attack of 40 deg in an attempt to alter the sense of the asymmetric vortex flow pattern. Circumferential position as well as longitudinal location were varied to determine the most effective bead position. Whether or not the beads were effective in controlling the magnitude and direction of the vortex asymmetries was determined by 3 circumferential rows of pressure taps and by a helium-bubble flow visualization technique. The most effective circumferential position was found to be approximately 140 deg from the windward ray. While holding this circumferential position constant, the effect of bead size at three stations further along the body was also investigated. It was found that the size of the bead necessary to reverse the asymmetry increased more rapidly than the growth in cylinder radius. In general, these results indicate that discrete geometric imperfections on a body's surface can force asymmetry in a given direction if they are sufficiently large relative to the local radius.

Moskovitz, Cary A.↗

Ada (R) assessment: An important issue within European Columbus Support Technology Programme

Software will be more important and more critical for Columbus than for any ESA previous project. As a simple comparison, overall software size has been in the range of 100 K source statements for EXOSAT, 500 K for Spacelab, and will probably reach several million lines of code for Columbus (all element together). Based on past experience, the total development cost of software can account for about 10 pct to 15 pct of the total space project development cost. The Ada technology may support the strong software engineering principles needed for Columbus, provided that technology is sufficiently mature and industry plans are meeting the Columbus project schedule. Over the past 3 years, Informatique Internationale has conducted a coherent program based on Ada technology assessment studies and experiments, for ESA and CNES. This specific research and development program benefits from 15 years experience in the field of space software development and is supported by the overall software engineering expertise of the company. The assessment and experiments of Ada software engineering by Informatique Internationale are detailed.

Vielcanet, P.↗

Space technology: A study of the significance of recognition for innovators of spinoff technologies. 1993 activities/1994, 1995 plans

During the past 30 years as NASA has conducted technology transfer programs, it has gained considerable experience - particularly pertaining to the processes. However, three areas have not had much scrutiny: the examination of the contributions of the individuals who have developed successful spinoffs, the commercial success of the spinoffs themselves, and the degree to which they are understood by the public. In short, there has been limited evaluation to measure the success of technology transfer efforts mandated by Congress. Research conducted during the first year of a three-year NASA grant to the United States Space Foundation has taken the initial steps toward measuring the success of methodologies to accomplish that Congressionally-mandated technology transfer. In particular, the US Space Foundation, in cooperation with ARAC, technology transfer experts; JKA, a nationally recognized themed entertainment design company; and top evaluation consultants, inaugurated and evaluated a fresh approach including commercial practices to encourage, motivate, and energize technology transfer by: recognizing already successful efforts (Space Technology Hall of Fame Award), drawing potential business and industrial players into the process (Space Commerce Expo), and informing and motivating the general public (Space Technology Hall of Fame public venues). The first year's efforts are documented and directions for the future are outlined.

Source record↗