Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cu impurities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A comprehensive diffusion mobility database comprising 23 elements for magnesium alloys

We report that reliable experimental diffusion coefficients of 10 key alloying elements in Mg obtained by the present authors together with experimental data in the literature enabled us to perform a systematic test of the reliability of diffusion coefficients obtained from DFT calculations. The computed activation energy values were found to be quite accurate (mostly within 0.2 eV) but the computed pre-factors were less reliable. Such insights allowed us to develop a practical and yet robust strategy to perform diffusion mobility assessments by adopting the computed activation energy while fitting only the pre-factor when available experimental data are limited to a narrow temperature range. The overall good agreement between the DFT data and experimental data also gave us the confidence to employ the computed data for those that were still missing or inaccessible from experimental measurements. A systematic assessment of both the measured and computed diffusion data in hcp Mg was performed using the above holistic approach to yield the most comprehensive open Mg mobility database to date, comprising 23 elements (Mg, Ag, Al, Be, Ca, Cd, Ce, Cu, Fe, Ga, Gd, In, La, Li, Mn, Nd, Ni, Pu, Sb, Sn, U, Y, Zn). This more reliable mobility database will contribute to future development of advanced Mg alloys. The holistic approach developed in this study will be very beneficial to the future establishment of reliable mobility databases for other alloy systems as well.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electrodialysis: An effective methodology to purify the leachate of spent Li-ion batteries

The electrification of transportation and the transition of society towards low or net-zero carbon emissions has led to a skyrocketing global demand for Li-ion batteries. After a service life of three to ten years, Li-ion batteries have less than 80 % of their initial capacities and draw near to the end of their lives for practical utilization. Due to potential supply chain shortages and the value embodied in Li-ion batteries, it is imperative to recycle them, to recover the materials, and to improve the circularity and the sustinability of the industry. How to cost-effectively purify spent batteries while reducing time, energy, and waste emissions is a challenge faced by Li-ion battery recyclers. The first electrochemical membrane reactor reported in our group hasa high selectivity towards lower Cu 2+ , Al 3+ and Fe 3+ ions (<5 ppm) and retains >95% of the Ni 2+ , Co 2+ and Mn 2+ ions in the leachate. An advanced electrochemical membrane reactor was developed in this study. Further, not only does the new reactor have the same selectivity as the original reactor, but other advantages including a faster leachate processing rate (up to 10X faster). The advanced reactor can also directly generate acid at the anode side; eliminating the reactor restoration step. The prominent advantages that this electrodialysis technology has over chemical-precipitation methods include: (1) ion recovery efficiencies do not diminish after removing the impurities, Ni 2+ , Co 2+ and Mn 2+ , even at a higher initial Ni 2+ ion concentrations; in comparison, chemical precipitation has Ni 2+ , Co 2+ and Mn 2+ ion recovery efficiencies reduced significantly when the initial Ni 2+ , Co 2+ and Mn 2+ ion concentrations increase. (2) electrodialysis does not change the concentrations of Ni 2+ , Co 2+ and Mn 2+ ions significantly, but chemical precipitation could reduce Ni 2+ and Co 2+ ions to less than half of their initial values. Through electro-dialyzing the leachate, the H 2 evolution reaction mechanism was found to switch from the Volmer-acid Heyrovsky mechanism to the Volmer-alkaline Heyrovsky mechanism at a pH of around 3.7.

25 ENERGY STORAGE↗
DOE OSTI2020

Degradation Mechanism Due to Water Ingress Effect on the Top Contact of Cu(In,Ga)Se2 Solar Cells

The impact of moisture ingress on the surface of copper indium gallium diselenide (CIGS) solar cells was studied. While industry-scale modules are encapsulated in specialized polymers and glass, over time, the glass can break and the encapsulant can degrade. During such conditions, water can potentially degrade the interior layers and decrease performance. The first layer the water will come in contact with is the transparent conductive oxide (TCO) layer. To simulate the impact of this moisture ingress, complete devices were immersed in deionized water. To identify the potential sources of degradation, a common window layer for CIGS devices—a bilayer of intrinsic zinc oxide (i-ZnO) and conductive indium tin oxide (ITO)—was deposited. The thin films were then analyzed both pre and post water soaking. To determine the extent of ingress, dynamic secondary ion mass spectroscopy (SIMS) was performed on completed devices to analyze impurity diffusion (predominantly sodium and potassium) in the devices. The results were compared to device measurements, and indicated a degradation of device efficiency (mostly fill factor, contrary to previous studies), potentially due to a modification of the alkali profile.

14 SOLAR ENERGY↗
DOE OSTI2025

Incorporation of Oxygen Carrier Recycle into Large-Scale Production of Cu-Based Oxygen Carriers

One of the greatest challenges in the chemical looping combustion (CLC) of solid fuels is developing an oxygen carrier material that is reactive and attrition resistant and can be prepared at a reasonable cost. Recent efforts in oxygen carrier development have followed two primary approaches: (1) using natural ores, such as ilmenite, or (2) developing highly attrition-resistant and reactive synthetic materials. Both approaches have shortcomings, namely, the low reactivity and incompatibility of ores with solid fuel CLC and the high cost and low durability of synthetic materials. Here, a different approach is taken where attrition is assumed inevitable and the recycling of spent oxygen carrier materials is incorporated into oxygen carrier manufacture. For solid fuel CLC, Cu-based oxygen carriers are attrited and are collected with fly ash. Copper oxides are more reactive with nitric acid than most ash materials, meaning that a copper-nitrate-rich leachate can be generated. This copper nitrate stream could then be reused in oxygen carrier synthesis by impregnation. For proof of concept, leaching experiments were conducted to verify that copper oxides are selectively leached from ash-containing spent oxygen carriers. Several cases for process design are proposed based on the composition of spent materials, as the degree of copper oxidation and type of solid fuel dictate leaching residence times and general processing intensity. The four stages proposed here include impurity removal, copper leaching and recovery, solid–liquid separation, and evaporation/concentrating. The resulting process should be able to recover up to 95% of copper while minimizing inclusion of undesirable ash-based impurities.

anions↗
DOE OSTI2021

Anisotropic time-domain electronic response in cuprates driven by midinfrared pulses

Superconductivity in the cuprates is characterized by an anisotropic electronic gap of d -wave symmetry. The aim of this study is to understand how this anisotropy affects the nonequilibrium electronic response of high-T c superconductors. Here we use a polarization selective time domain experiment to address the dynamics of electronic excitation of different symmetry in optimally doped Bi 2 Sr 2 Y 0.08 Ca 0.92 Cu 2 O 8+δ and measure the nodal and antinodal nonequilibrium response resulting from photoexcitations with ultrashort pulses with photon energy comparable to the superconducting gap. The response to long wavelength photoexcitation with pump polarization along the Cu-Cu axis of the sample is discussed with the support of an effective d-wave BCS model which suggests that such transient response could be ascribed to an increase of pair coherence in the antinodal region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Simultaneous Determination of Halogens and Metals in Waste Plastic Pyrolysis Oil by Inductively Coupled Plasma Mass Spectrometry

A major barrier to integrating pyrolysis-derived oil into conventional refinery technology is the presence of impurities, particularly halogens and metals, that can deactivate catalysts. This study presents a novel, cost-effective approach for the simultaneous analysis of a subset of halogens, metals, nonmetals, and metalloids in complex, industrially relevant distilled pyrolysis oil samples, this was previously achievable only through multiple techniques. Excellent results were obtained using a widely accessible inductively coupled plasma mass spectrometry (ICP-MS) method with helium gas mode and standard laboratory consumables, enabling high-throughput analysis and efficient evaluation of adsorbent performance. Sample preparation is straightforward, requiring only dilution in a compatible matrix, and provides accurate and precise quantification, with 75%–137% spike recovery for Be, Ti, V, Cr, Fe, Ni, Co, Cu, As, Se, Mo, Cd, Sb, Tl, and Pb, and 62%–65% spike recovery for Cl and 109%–133% spike recovery for Br. Additionally, an enhanced version of the method using ICP-MS/MS and hydrogen gas is described, which has higher accuracy with 69%–112% spike recovery for Be, B, Ti, V, Fe, Co, Ni, Cu, As, Se, Mo, Cd, Sb, Tl, and Pb, with 85%–102% spike recovery for Cl and 63%–93% spike recovery for Br. Helium mode detection limits for industrially relevant elements (V, Fe, Ni, Cu, As, and Pb) are less than 1.7 µg/kg, and less than 0.2 mg/kg for Br and Cl. Furthermore, this methodology facilitates rapid systematic evaluation of adsorption capacities of materials under time-on-stream conditions and supports robust comparisons across diverse operating environments.

Lazarcik, James [University of Wisconsin-Madison, ↗
NASA NTRS1990

Studies of iron impurities in YxPr1-xBa2Cu3O7-delta

Pr is the only rare earth which, when substituted for Y in YBa2Cu3O7, significantly alters the superconducting transition temperature T(sub c) without changing the crystal structure. For YxPr1-xBa2Cu3O7-delta with delta approx. equal to 0, T(sub c) is reduced rapidly as x is increased, reaching zero for x about 0.5. For x above 0.5 the compound is antiferromagnetic with a Neel temperature that increases with increasing x, rising to above room temperature for x near 1. A similar behavior is observed when the oxygen deficit delta is increased from zero to 1 with x=0. For the case of Pr substitution, the drop in T(sub c) is believed due to magnetic interactions. For the case of varying delta with x=0, the drop can be attributed to a combination of magnetic interactions, band filling, and changes in crystal structure. To study these effects, the Mossbauer effect of 57 Fe atoms substituted for the Cu atoms has been observed as a function of delta, x, and temperature. The observed spectra are all well described by a two quadrupole-split pairs, a central singlet, and a six-line magnetic hyperfine field pattern. For several Pr compositions both delta and temperature were varied, and the results support the hypothesis that a magnetic interaction exists between the Fe in the Cu lattice and the substitutional Pr atoms.

Swartzendruber, L. J.↗
DOE OSTI2024

Observation and Characterization of Vibrationally Active Surface Species Accessed with Nonthermal Nitrogen Plasmas

Polycrystalline Ni, Pd, Cu, Ag, and Au foils exposed to nonthermal plasma (NTP)-activated N 2 are found to exhibit a vibrational feature near 2200 cm –1 in polarization-modulation infrared reflection-absorption spectroscopy (PM-IRAS) observations that are not present in the same materials exposed to N 2 under nonplasma conditions. The feature is similar to that reported elsewhere and is typically assigned to chemisorbed N 2 . We employ a combination of temperature-dependent experiments, sequential dosing, X-ray photoelectron spectroscopy, isotopic labeling, and density functional theory calculations to characterize the feature. Results are most consistent with a triatomic species, likely NCO, with the C and O likely originating from ppm-level impurities in the ultrahigh-purity (UHP) Ar and/or N 2 gas cylinders. Here, this work highlights the potential for nonthermal plasmas to access adsorbates inaccessible thermally as well as the potential contributions of ppm-level impurities to corrupt the interpretation of plasma catalytic chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Accurate determination of production data of the non-standard positron emitter 86 Y via the 86 Sr(p,n)-reaction

In view of several significant discrepancies in the excitation function of the 86 Sr(p,n) 86g+xm Y reaction which is the method of choice for the production of the non-standard positron emitter 86 Y for theranostic application, we carried out a careful measurement of the cross sections of this reaction from its threshold up to 16.2 MeV at Forschungszentrum Jülich (FZJ) and from 14.3 to 24.5 MeV at LBNL. Thin samples of 96.4% enriched 86 SrCO 3 were prepared by sedimentation and, after irradiation with protons in a stacked-form, the induced radioactivity was measured by high-resolution γ -ray spectrometry. The projectile flux was determined by using the monitor reactions nat Cu(p,xn) 62,63,65 Zn and nat Ti(p,x) 48 V, and the calculated proton energy for each sample was verified by considering the ratios of two reaction products of different thresholds. Additionally, the experimental cross section data obtained agreed well with the results of a nuclear model calculation based on the code TALYS. From the cross section data, the integral yield of 86 Y was calculated. Over the optimum production energy range E p = 14 → 7 MeV the yield of 86 Y amounts to 291 MBq/μA for 1 h irradiation time. This value is appreciably lower than the previous literature values calculated from measured and evaluated excitation functions. It is, however, more compatible with the experimental yields of 86 Y obtained in clinical scale production runs. The levels of the isotopic impurities 87m Y, 87g Y, and 88 Y were also estimated and found to be <2% in sum.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

First-Principles Calculations of the Electrical Conductivity of Carbon Nanotubes Functionalized with Copper and Nitrogen: Implications for Electronics, Energy Storage, and Nanodevices

In this work, we investigate the electrical conductivity of carbon nanotubes (CNTs), with a particular focus on the effects of doping. Using first-principles-based approaches, we study the electronic structure, phonon dispersion, and electron–phonon scattering to understand the finite-temperature electrical transport properties in CNTs. Our study covers both prototypical metallic and semiconducting CNTs, with special emphasis on the influence of typical defects such as vacancies and the incorporation of copper or nitrogen, such as pyridinic N, pyrrolic N, graphitic N, and oxidized N. Our theoretical study shows significant improvements in the electrical conduction properties of copper-CNT composites, especially when semiconducting CNTs are functionalized with nitrogen. Doping is found to cause significant changes in the electronic density of states near the Fermi level, which affects the electrical conductivity. Calculations show that certain types of functional groups, such as N-pyrrolic, result in more than 30-fold increase in the conductivity of semiconducting CNTs compared to Cu-incorporated CNTs alone. For metallic CNTs, the conductivity is in agreement with existing experimental data, and our prediction of significant increases in conductivity with N-pyrrolic functional group is consistent with recent experimental results, demonstrating the effectiveness of doping in modifying conductivity. In conclusion, our study provides valuable insight into the electronic properties of doped CNTs and contributes to the development of ultrahigh conductivity CNT composites.

36 MATERIALS SCIENCE↗
NASA NTRS2010

Rocket-Plume Spectroscopy Simulation for Hydrocarbon-Fueled Rocket Engines

The UV-Vis spectroscopic system for plume diagnostics monitors rocket engine health by using several analytical tools developed at Stennis Space Center (SSC), including the rocket plume spectroscopy simulation code (RPSSC), to identify and quantify the alloys from the metallic elements observed in engine plumes. Because the hydrocarbon-fueled rocket engine is likely to contain C2, CO, CH, CN, and NO in addition to OH and H2O, the relevant electronic bands of these molecules in the spectral range of 300 to 850 nm in the RPSSC have been included. SSC incorporated several enhancements and modifications to the original line-by-line spectral simulation computer program implemented for plume spectral data analysis and quantification in 1994. These changes made the program applicable to the Space Shuttle Main Engine (SSME) and the Diagnostic Testbed Facility Thruster (DTFT) exhaust plume spectral data. Modifications included updating the molecular and spectral parameters for OH, adding spectral parameter input files optimized for the 10 elements of interest in the spectral range from 320 to 430 nm and linking the output to graphing and analysis packages. Additionally, the ability to handle the non-uniform wavelength interval at which the spectral computations are made was added. This allowed a precise superposition of wavelengths at which the spectral measurements have been made with the wavelengths at which the spectral computations are done by using the line-by-line (LBL) code. To account for hydrocarbon combustion products in the plume, which might interfere with detection and quantification of metallic elements in the spectral region of 300 to 850 nm, the spectroscopic code has been enhanced to include the carbon-based combustion species of C2, CO, and CH. In addition, CN and NO have spectral bands in 300 to 850 nm and, while these molecules are not direct products of hydrocarbon-oxygen combustion systems, they can show up if nitrogen or a nitrogen compound is present as an impurity in the propellants and/or these can form in the boundary layer as a result of interaction of the hot plume with the atmosphere during the ground testing of engines. Ten additional electronic band systems of these five molecules have been included into the code. A comprehensive literature search was conducted to obtain the most accurate values for the molecular and the spectral parameters, including Franck-Cordon factors and electronic transition moments for all ten band systems. For each elemental transition in the RPSSC, six spectral parameters - Doppler broadened line width at half-height, pressure-broadened line width at half-height, electronic multiplicity of the upper state, electronic term energy of the upper state, Einstein transition probability coefficient, and the atomic line center - are required. Input files have been created for ten elements of Ni, Fe, Cr, Co, Cu, Ca, Mn, Al, Ag, and Pd, which retain only relatively moderate to strong transitions in 300 to 430 nm spectral range for each element. The number of transitions in the input files is 68 for Ni; 148 for Fe; 6 for Cr; 87 for Co; 1 for Ca; 3 for Mn; 2 each for Cu, Al, and Ag; and 11 for Pd.

Tejwani, Gopal D.↗
DOE OSTI2020

Ultra-thin passivation layers in Cu(In,Ga)Se 2 thin-film solar cells: full-area passivated front contacts and their impact on bulk doping

In the search for highly transparent and non-toxic alternative front layers replacing state-of-the-art CdS in Cu(In,Ga)Se 2 thin-film solar cells, alternatives rarely exceed reference devices in terms of efficiency. Full-area ultra-thin aluminium oxide tunnelling layers do not require any contact patterning and thus overcome the main drawback of insulating passivation layers. Even a few monolayers of aluminium oxide can be deposited in a controlled manner by atomic layer deposition, they show excellent interface passivation properties, low absorption, and suitable current transport characteristics on test devices. Depositing a ZnO-based transparent front contact, however, results in extremely poor solar cell performance. The issue is not necessarily a low quality of the alternative front layer, but rather the intricate relation between front layer processing and electronic bulk properties in the absorber layer. We identify three challenges critical for the development of novel front passivation approaches:(i) both Cd and Zn impurities beneficially reduce the high native net dopant concentration in the space charge region, (ii) sputter deposition of ZnO damages the passivation layer resulting in increased interface recombination, (iii) thermal treatments of devices with ZnO layer result in substantial Zn diffusion, which can penetrate the full absorber thickness already at moderate temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Investigating Cu-Site Doped Cu–Sb–S Nanoparticles Using Photoelectron and Electron Paramagnetic Resonance Spectroscopy

Tetrahedrite (Cu 12 Sb 4 S 13 ) and famatinite (Cu 3 SbS 4 ) are good candidates for green energy applications because they possess promising thermoelectric and photovoltaic properties as well as contain earth-abundant and nontoxic constituents. Herein, X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and electron paramagnetic resonance spectroscopy (EPR) methods examined inherent electronic properties and interatomic magnetic interactions of Cu-site doped tetrahedrite and famatinite nanomaterials. An energy-efficient modified polyol method was utilized for the synthesis of tetrahedrite and famatinite nanoparticles doped on the Cu-site with Zn, Fe, Ni, Mn, and Co. This is the first parallel study of tetrahedrite and famatinite nanomaterials with XPS, UPS, and EPR methods alongside a systematic analysis of dopant-dependent effects on the electronic structure and magnetic interactions for each material. XPS showed that the Cu and Sb species in tetrahedrite and famatinite possess different oxidation states, while UPS characterization reveals larger dopant-dependent shifts in the work function for tetrahedrite nanoparticles (4.21 to 4.79 eV) than for famatinite nanoparticles (4.57 to 4.77 eV). Finally, all famatinite nanoparticles display an EPR signal, indicating trace amounts of paramagnetic Cu(II) present below the detection limit of XPS. For tetrahedrite, EPR signatures were observed only for the Zn-doped and Mn-doped nanoparticles, suggesting signal broadening from Cu–Cu spin exchange or spin–lattice relaxation. This study demonstrates the complementary nature of XPS and EPR techniques for studying the oxidation states of metals in solid-state nanomaterials. Comparing the electronic and magnetic properties of tetrahedrite and famatinite while studying the impact of dopant incorporation will guide future endeavors in designing sustainable, high-performance materials for renewable energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structural, Optical, and Electronic Properties of Two Quaternary Chalcogenide Semiconductors: Ag 2 SrSiS 4 and Ag 2 SrGeS 4

Quaternary chalcogenide materials have long been a source of semiconductors for optoelectronic applications. Recent studies on the I2-II-IV-X4 (I = Ag, Cu, Li; II = Ba, Sr, Eu, Pb; IV = Si, Ge, Sn; X = S, Se) materials have shown particular versatility and promise among these compounds. These semiconductors take advantage of a diverse bonding scheme and chemical differences among cations to target a degree of anti-site defect resistance. Within this set of compounds, the materials containing both Ag and Sr have not been experimentally studied and leave a gap in the full understanding of the family. Here, we have synthesized powders and single crystals of two Ag- and Sr-containing compounds, Ag 2 SrSiS 4 and Ag 2 SrGeS 4 , each found to form in the tetragonal I4¯2m structure of Ag 2 BaGeS 4 . During the synthesis targeting the title compounds, two additional materials, Ag 2 Sr 3 Si 2 S 8 and Ag 2 Sr 3 Ge 2 S 8 , have also been identified. Furthermore, these cubic compounds represent impurity phases during the synthesis of Ag 2 SrSiS 4 and Ag 2 SrGeS 4 . We show through hybrid density functional theory calculations that Ag 2 SrSiS 4 and Ag 2 SrGeS 4 have highly dispersive band edge states and indirect band gaps, experimentally measured as 2.08(1) and 1.73(2) eV, respectively. Second-harmonic generation measurements on Ag 2 SrSiS 4 and Ag 2 SrGeS 4 powders show frequency doubling capabilities in the near-infrared range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2001

Photoluminescence Studies of ZnSe Starting Materials and Vapor Grown Bulk Crystals

Low-temperature photoluminescence (PL) spectra were measured on ZnSe starting materials provided by various vendors and on bulk crystals grown from these starting materials by physical vapor transport (PVT) to study the effects of purification and contamination during PVT process. The impurity levels in one set of starting material/grown crystal were also measured by glow discharge mass spectroscopy (GDMS). The purification effect of pre-growth heat treatments and the PVT process is evidenced from the GDMS results which showed orders of magnitude reduction in the Li and Na concentration and a factor of 3 reduction in the O content after growth. The PL spectra showed that the strong emissions associated with Li (or Na) in one of the starting materials disappeared after growth. The GDMS results also showed increases in the At and Si contents by orders of magnitude after growth. To evaluate the contamination of the crystal during the high temperature growth process, three growth runs were processed using similar growth parameters but different furnace environments. The PL spectra suggest that the At contamination originated from the fused silica ampoule and that the Inconel cartridge might have been the cause of the broad Cu green and Cu red bands observed in one of the grown crystals.

Su, Ching-Hua↗
DOE OSTI2021

An electronic origin to the oscillatory segregation behavior in Ni-Cr and other BCC defects in FCC metals

Ni-Cr alloys exhibit oscillatory segregation behaviors near low index surfaces, in which the preferred segregation species changes from Ni in the first layer to Cr in the second layer. In many dilute-alloy systems, this oscillatory pattern is attributed to the elastic release of stresses in the local lattice around the segregating solute or impurity atom. These stresses are mostly thought to originate from mismatches in the atomic size of the solute and host atoms. In Ni-Cr alloys, however, an appreciable mismatch in atomic size is not present, leading to questions about the origins of the oscillatory behavior in this alloy. Therefore, using density functional theory, we have modeled the segregation of a single Cr atom in the and surfaces of FCC Ni, an alloy which exhibits this oscillatory behavior. Using Bader charge analysis, we show that the negative energy correlates directly with the amount of charge on the Cr atom. As Ni atoms strip valence charge from the Cr, the Cr contracts slightly in size. The greatest contraction and highest positive charge for the Cr occurs when it is in the second layer of the surface where the system exhibits the oscillating negative segregation energy. We then find that this behavior persists in other alloy systems (Ag-Nb, Cu-Cr, Pt-Nb, and Pt-V), which exhibit similar atomic radii and electronegativity differences between host and solute to Ni-Cr. These represent alloys in which the host metal exhibits an FCC ground-state structure while the solute metal exhibits a BCC ground-state structure.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Electronic characterization of defects in narrow gap semiconductors

We use a Green's function technique to calculate the position of deep defects in narrow gap semiconductors. We consider substitutional (including antisite), vacancy, and interstitial (self and foreign) deep defects. We also use perturbation theory to look at the effect of nonparabolic bands on shallow defect energies and find nonparabolicity can increase the binding by 10 percent or so. We consider mercury cadmium telluride (MCT), mercury zinc telluride (MZT), and mercury zinc selenide (MZS). For substitutional and interstitial defects we look at the situation with and without relaxation. For substitutional impurities in MCT, MZT, and MZS, we consider x (the concentration of Cd or Zn) in the range 0.1 less than x less than 0.3 and also consider appropriate x so E(sub g) = 0.1 eV for each of the three compounds. We consider several cation site s-like deep levels and anion site p-like levels. For E(sub g) = 0.1 eV, we also consider the effects of relaxation. Similar comments apply to the interstitial deep levels whereas no relaxation is considered for the ideal vacancy model. Relaxation effects can be greater for the interstitial than the substitutional cases. Specific results are given in figures and tables and comparison to experiment is made in a limited number of cases. We find, for example, that I, Se, S, Rn, and N are possible cation site, s-like deep levels in MCT and Zn and Mg are for anion site, p-like levels (both levels for substitutional cases). The corresponding cation and anion site levels for interstitial deep defects are (Au, Ag, Hg, Cd, Cu, Zn) and (N, Ar, O, F). For the substitutional cases we have some examples of relaxation moving the levels into the band gap, whereas for the interstitial case we have examples where relaxation moves it out of the band gap. Future work involves calculating the effects of charge state interaction and seeing the effect of relaxation on vacancy levels.

Patterson, James D.↗
NASA NTRS2022

Analysis of Base Metal Microstructures and Mechanical Properties of a Single-Piece, Spin-Formed Forward Pressure Vessel Bulkhead

In 2012, a pathfinder forward pressure vessel bulkhead (FPVBH) for the Orion Multi-Purpose Crew Vehicle (MPCV) was fabricated using aluminum (Al) alloy 2219. The demonstration article was offered as a replacement for the baseline configuration, which at that time was a multi-piece welded construction using aluminum-lithium (Al-Li) alloy 2195. In 2014, the NASA Engineering and Safety Center (NESC) funded a Phase I effort to explore spin-forming as a manufacturing method to produce a complex-shaped, single-piece FPVBH for the crew module (CM) [1]. The primary focus of the NESC effort was to expand spin-forming technology to the fabrication of an Al-Li 2195 FPVBH. As a result, limited testing and analysis was performed on the original Al 2219 article. In this study, a sufficiently large plate of Al 2219 was not available for the fabrication of a FPVBH. Therefore, the forming blank comprised two plates (from different lots) butt welded together using a single friction stir weld. The welded forming blank was then spin formed into the FPVBH configuration and heat treated to the T62 temper. Mechanical property testing of the spin-formed 2219-T62 FPVBH revealed that the tensile properties were comparable to the Metallic Material Properties Development and Standardization (MMPDS) A-basis allowable for Al 2219-T6 wrought products. However, post-spin forming application of the standard heat treatment produced large, recrystallized grains in the material. The response varied within the two plates; one plate lot exhibited nearly complete recrystallization, while the other lot contained bands of recrystallization. Although no reduction in tensile properties was observed due to these microstructural variations, a more detailed investigation was recommended to better understand the effect of spin forming on the recrystallization mechanism and the impact on other material properties. The current study examined the microstructure and mechanical properties of the fully processed Al 2219-T62 FPVBH with emphasis on comparing differences between the two plates. Testing was limited to the cone region of the FPVBH. The two specific tasks in this study were: a) Characterization of the microstructure and mechanical properties in the two plates used in the FPVBH. b) Isolation of the impact of each step in the thermo-mechanical processing (TMP) sequence of the FPVBH on recrystallization and grain growth. Mechanical property testing sampled regions containing both large, recrystallized and small, unrecrystallized grains. Tensile strengths and elongations were equivalent in both regions and exceeded MMPDS A-basis allowables. Fracture toughness was equivalent in both regions and fracture morphology was typical of aluminum alloys. The fatigue precrack region of the fracture toughness specimens appeared more faceted in the recrystallized plate. This suggests that property testing that is more sensitive to grain size, such as fatigue crack growth rate and stress corrosion cracking, may be warranted. Alcoa reviewed the production records for the two plate lots and confirmed that composition of both plates was within the allowable range for Al 2219 and that plate processing steps were all performed within production limits. However, the Fe content was notably higher in the fully recrystallized plate, resulting in a greater volume fraction of large Fe-bearing inclusions and Al-Cu constituent particles. Alcoa did not provide details regarding plate processing variables for the two plate lots. It was surmised that deformation by hot rolling was the most accurate TMP simulation of commercial spin forming within a laboratory setting. Both hot rolling and spin forming comprise combinations of shear and compressive deformation. The through-thickness strain caused by hot rolling is symmetrical about the mid-plane, as the rollers contact both sides of the material. Shear strains are maximum at the inner and outer surfaces and trend toward zero at the mid-thickness. In contrast, spin forming utilizes a single roller on the outer surface, producing a gradient in shear stress through the thickness. Shear strains in spin-formed material are highest at the outer surface due to direct contact with the roller, and trend toward zero at the inner surface. Consequently, there will undoubtedly be some discrepancies in the mechanical response of hot-rolled and spin-formed products in the through-thickness direction. Interrupted TMP simulations were performed on remnant plate from the FPVBH forming blank in order to isolate the effects of a post-weld anneal, spin-forming deformation/thermal cycling, and solution heat treatment (SHT) on development of the recrystallized microstructures. Analysis confirmed that large, recrystallized grains formed exclusively during SHT and only after a certain deformation level was exceeded. Remnant plate from both lots that received thermal processing only did not exhibit recrystallization but exhibited fully recrystallized microstructures when processed by hot rolling. This indicates that (1) the level of deformation exceeded the critical level for recrystallization in both plates and (2) that the level of deformation during hot rolling was greater than that which accumulated during spin forming of the FPVBH. Comparison of the hot-rolled plate with the spin-formed material showed that the recrystallized grain size was larger in the FPVBH, providing further evidence that deformation levels were lower in the FPVBH. The most plausible explanation for the differing degrees of recrystallization in the two plates is particle stimulated nucleation (PSN) at the Fe-bearing inclusions and large Al-Cu constituent particles. In the plate with higher solute content, the greater volume fraction of these particles reduces the deformation level required to promote recrystallization. During spin forming the critical deformation level was likely exceeded for the higher Fe content plate resulting in a fully recrystallized microstructure. The lower Fe content plate developed a microstructure that exhibited bands of recrystallization due to the combination of a non-uniform distribution of particles and deformation. The critical deformation required for recrystallization was likely only exceeded during spin forming in regions of higher particle content. While there were differences in Fe content between these lots of Al 2219 plate, the composition of both was within defined alloy limits and Alcoa reported no anomalies during plate production. The observed differences in recrystallization after spin forming may reflect the inherent variability between these two lots of plate. The spin-forming vendor, Spincraft, reported that similar variations in recrystallized microstructures have been observed during examination of multiple spin-forming trials of a different 2xxx series aluminum alloy. Hence, tighter chemical specification limits on impurity levels in Al 2219 plate may help ensure uniform, predictable microstructures. Finally, the tensile and fracture toughness properties were not affected by the microstructural variations noted.

single-piece↗