SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Manually operated slitter can cut single slit in flat conductor cable to any desired length. Lateral position of flat conductor cable is adjusted with aid of optical magnifier and cursor glass to ensure that slit is accurately placed between conductors. Multiple slits may be made by repeating procedure for single slit.
Construction details, error analysis, and typical data for a rapid comparative device for thermal conductivity measurements are presented. The apparatus consists of a comparative cut-bar arrangement contained in a bell-jar. The cylinder shaped specimen is placed between two ARMCO-iron meter bars of the same diameter. The upper bar is equipped with a heater, while the lower one is terminated in a heat sink. The temperature gradient along the bars is measured with a series of copper/constantan microthermocouples, spot welded to them. The assembly is held together by loading the bars to a desired pressure, via a pneumatic cylinder. Contact resistance at the boundaries between the specimen and the meter bars is minimized by using a Hg/In/Ga alloy film at the interface and sufficient loading force. The gradients determined for the meter bars then may be extrapolated to the boundaries yielding the temperature drop along the specimen. Using two different length specimens, the magnitude of the temperature drop across the interface can be computed, or the true gradient along the specimen can be obtained from the difference in overall temperature drops and lengths.
Corrugated horns involve a junction between the corrugated surface and a conducting groundplane. Proper horn design requires an understanding of the electromagnetic properties of the corrugated surface and this junction. Therefore, an integral equation solution has been used to study the influence of corrugation density and shape on the power loss. Surface current, and the scattering from a groundplane-corrugated surface junction. Both square and vee shape corrugations have been considered over the range of corrugation depths where the surface acts as a cut-off corrugated surface.
Although filter inductor designers have routinely tended to specify molypermalloy powder cores for use in high frequency power converters and pulse-width modulated switching regulators, there are sigificant advantages in specifying C cores and cut toroids fabricated from grain oriented silicon steels which should not be overlooked. Such steel cores can develop flux densities of 1.6 tesla, with useful linearity to 1.2 tesla, whereas molypermalloy cores carrying d.c. current have useful flux density capabilities only to about 0.3 tesla. The use of silicon steel cores thus makes it possible to design more compact cores, and therefore inductors of reduced volume, or conversely to provide greater load capacity in inductors of a given volume. Information is available which makes it possible to obtain quick and close approximations of significant parameters such as size, weight and temperature rise for silicon steel cores for breadboarding. Graphs, nomographs and tables are presented for this purpose, but more complete mathematical derivations of some of the important parameters are also included for a more rigorous treatment.
A new acoustic liner design procedure based upon model cut-off ratio is outlined. Proposed experiments to substantiate this design procedure are outlined.
Dielectric breakdown in shock-loaded x-cut quartz is examined under conditions of both impact loading and Q-switched laser-irradiation loading. It is observed that breakdown is characterized by an inherent time delay which depends on the magnitude of the electric field. For pulse duration less than about 30 ns, dielectric breakdown is not observed.
Advantages of specifying C cores and cut toroids fabricated from grain oriented silicon steels for use in high frequency power converters and pulse width modulated switching regulators are discussed. A method for rating cores assigns to each core a number which is the product of its window and core cross section area, called 'Area Product A sub p.' A correlation between the A sub p numbers and current density for a given temperature rise was developed. Also, straight line relationships were developed for A sub p and volume, A sub p and surface area, and A sub p and weight. These relationships can be used to simplify and standardize the process of inductor design. They also make it possible to design inductors of small bulk and volume or to optimize efficiency.
The tooth surface principal radii of curvature of crown (flat) gears were determined. Specific results are presented for involute, straight, and hyperbolic cutter profiles. It is shown that the geometry of circular cut spiral bevel gears is somewhat simpler than a theoretical logarithmic spiral bevel gear.
Angle transducers measure angle between track sections as longwall shearer proceeds along coal face. Distance transducer functions in conjunction with angle transducers to obtain relative angles at known positions. When cut is complete, accumulated data are stored on cassette tape, and track profile is computed and displayed. Micro-processor-based instrument integrates small changes in angle and distance.
An analysis of tooth profile changes in the transverse plane of circular-cut, spiral-bevel crown gears is presented. The analysis assumes a straight-line profile in the mid-transverse plane. The profile variation along the centerline is determined by using expressions for the variation of the spiral angle along the tooth centerline, together with the profile description at the mid-transverse plane. It is shown that the tooth surface is a hyperboloid and that significant variations in the pressure angle are possible.
An analysis of the surface geometry of spiral bevel gears formed by a circular cutter is presented. The emphasis is upon determining the tooth surface principal radii of curvature of crown (flat) gears. Specific results are presented for involute, straight, and hyperbolic cutter profiles. It is shown that the geometry of circular cut spiral bevel gears is somewhat simpler than a theoretical logarithmic spiral bevel gear.
Geometrical studies of circular cut spiral bevel gears are reported. Tooth profile changes heel to toe are studied in the transverse plane. Pressure angle changes are determined. The radiuses of curvature of the tooth surfaces generated by various cutter profiles are also determined. The consequences of cutter profile changes are explored. Crown gears are emphasized and the implications for conical gears are discussed.
The coupled base motion equations of a system composed of a launch vehicle and several payloads are derived. In previous work it was shown how the special form of these equations allow for a quick and accurate solution both for the response and the loads of the system. In this paper a short-cut version of this direct integration technique is presented and evaluated. The result is a method which, depending on the nature of the structure at hand, vasilates between a full-scale coupled base motion approach and an open loop base drive method. Although completely general, the presented technique is most effective when the number of interface degrees of freedom is relatively small compared to the overall number of degrees of freedom of the system. The S.T.S.-S.T.-O.M.S. Kit system is used as an illustrative example.
Attachment to grinder used to cut small pipe ends square and smooth, ready for welding. Attachment simple plate bracket fastened to air pencil grinder held against pipe flange to guide grinder.
The main mechanisms involved in the wear of cutting tools are reviewed. Evaluation of the different coating properties required for the reduction of the different kinds of wear was also reviewed. The types of coatings and their ranges of applicability are presented and discussed in view of their properties. Various coating processes as well as their advantages and shortcomings are described. Potential future developments in the field of wear-resistant coatings are discussed.
The U.S. Army uses explosively actuated window cutting assemblies to provide emergency crew ground egress. Gaps between the system's explosive cords and acrylic windows caused a concern about functional reliability for a fleet of several hundred aircraft. A field repair method, using room temperature vulcanizing silicone compound (RTV), was developed and demonstrated to fill gaps as large as 0.250 inch.
At the Eleventh International Conference on Cosmic Rays in 1969, the results of a study of the solar diurnal variations of solar rays observed during the ascending phase of solar activity cycle twenty was discussed. The diurnal variation, observed underground during 1965-68 period, and results from an extraterrestrial anisotropy having a continuously increasing upper cut-off rigidity R sub c were reported. However, the coupling functions applicable to underground telescopes were controversial then. This situation has improved now. Those results wsere re-examined and extended to cover the period 1965-78. The coupling functions given by Murakami et al. for underground muons and those given by Lockwood and Weber for neutron monitors were used showed that a great deal of care should be exercised in the value of R sub c was calculated. Although numerical values of R sub c are a little different, the trend for 1965-68 period remains unchanged. Highest value of R sub c occur in 1970 and the lowest value occurs in 1976.
Laser machining helps to balance high-speed rotating machinery. Report describes continuing studies of fatigue lives of materials cut by lasers. One long-term objective of such studies is use of laser machining to balance rotors operating at high speeds. To achieve objective, necessary to know relationship between effects of conventional and laser machining on fatigue lives of machined materials.