SEARCH · Search NASA

Results for “Data Reuse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Acoustic environmental accuracy requirements for response determination

A general purpose computer program was developed for the prediction of vehicle interior noise. This program, named VIN, has both modal and statistical energy analysis capabilities for structural/acoustic interaction analysis. The analytic models and their computer implementation were verified through simple test cases with well-defined experimental results. The model was also applied in a space shuttle payload bay launch acoustics prediction study. The computer program processes large and small problems with equal efficiency because all arrays are dynamically sized by program input variables at run time. A data base is built and easily accessed for design studies. The data base significantly reduces the computational costs of such studies by allowing the reuse of the still-valid calculated parameters of previous iterations.

Pettitt, M. R.↗

NASA NTRSDate not supplied

A Model-Based Framework for NASA Science Mission Formulation

This paper details an effort to implement NASA systems engineering standards and practices using a Digital System Model (DSM), which we also refer to as the system architecture model (SAM). Creating a SAM at the beginning of a design effort helps systems engineer identify errors, inconsistencies, and miscommunications as early as possible. Such issues can then be resolved before it becomes costly and requires significant rework to do so. A pre-formulation SAM also enables advanced trade studies at the earliest stage of concept development. This results in “win-wins” where architecture changes can reduce cost without decreasing effectiveness, or increase effectiveness without increasing cost. SAMs also streamline the creation of project documentation and facilitate superior dialogue between science, engineering, and management stakeholders. Common artifacts such as Master Equipment Lists (MELs), Science Traceability Matrices (STMs), and Mission Traceability Matrices (MTMs), can be automatically maintained through requirements and structural models in the SAM. Key performance parameters (and changes to them) can be tied to simulations in the SAM, allowing far more rapid and extensive trade space exploration. As will be shown in this work, these advantages have been realized for the first time in an actual NASA Goddard Space Flight Center (GSFC) pre-phase A and phase A concept study. Modelbased design tools have been developed in a general, modular manner to maximize reuse on future programs. Focus is placed on structural and requirements architecture modeling. Data is ingested into the SAM from existing discipline model outputs (e.g. MS Excel spreadsheets) and used to update a SysML structural model. A mission requirements model is created within the SAM, containing mission specific as well as standard GSFC mission requirements. With the linked requirements model and structural model, automated compliance checking will be performed as mission parameters evolve without the need for discipline engineers to work directly with the SAM in SysML.

MBSE↗

NASA NTRS2013

Engineering of Data Acquiring Mobile Software and Sustainable End-User Applications

The criteria for which data acquiring software and its supporting infrastructure should be designed should take the following two points into account: the reusability and organization of stored online and remote data and content, and an assessment on whether abandoning a platform optimized design in favor for a multi-platform solution significantly reduces the performance of an end-user application. Furthermore, in-house applications that control or process instrument acquired data for end-users should be designed with a communication and control interface such that the application's modules can be reused as plug-in modular components in greater software systems. The application of the above mentioned is applied using two loosely related projects: a mobile application, and a website containing live and simulated data. For the intelligent devices mobile application AIDM, the end-user interface have a platform and data type optimized design, while the database and back-end applications store this information in an organized manner and manage access to that data to only to authorized user end application(s). Finally, the content for the website was derived from a database such that the content can be included and uniform to all applications accessing the content. With these projects being ongoing, I have concluded from my research that the applicable methods presented are feasible for both projects, and that a multi-platform design for the mobile application only marginally drop the performance of the mobile application.

Smith, Benton T.↗

NASA NTRS2003

Standardized Spacecraft Onboard Interfaces

The Consultative Committee for Space Data Systems (CCSDS), an international organization of national space agencies, is branching out to provide new standards to enhanced reuse of onboard spacecraft equipment and software. These Spacecraft Onboard Interface (SOIF) standards will be, in part, based on the well-known Internet protocols. This paper will provide a description of the SOIF work by describing three orthogonal views: the Services View that describes data communications services, the Interoperability view shows how to exchange data and messages between different spacecraft elements, and the Protocol view, that describes the SOIF protocols and services. We will also provide a description of the present state of the services that will be provided to SOIF users, and are the basis of the utility of these standards.

space interfaces↗

NASA NTRS1993

Runtime support and compilation methods for user-specified data distributions

This paper describes two new ideas by which an HPF compiler can deal with irregular computations effectively. The first mechanism invokes a user specified mapping procedure via a set of compiler directives. The directives allow use of program arrays to describe graph connectivity, spatial location of array elements, and computational load. The second mechanism is a simple conservative method that in many cases enables a compiler to recognize that it is possible to reuse previously computed information from inspectors (e.g. communication schedules, loop iteration partitions, information that associates off-processor data copies with on-processor buffer locations). We present performance results for these mechanisms from a Fortran 90D compiler implementation.

Ponnusamy, Ravi↗

NASA NTRS1990

Reuse metrics and measurement: A framework

The lessons learned and experience gleaned are described by those who have started to implement the reuse metrics and measurement framework used in controlling the development of common avionics and software for its affiliated aircraft programs. The framework was developed to permit the measurement of the long term cost/benefits resulting from the creation and use of Reusable Software Objects (RSOs). The framework also monitors the efficiency and effectiveness of the Software Reuse Library (SRL). The metrics and measurement framework is defined which was established to allow some determinations and findings to be made relative to software reuse. Seven criteria are discussed which were used to guide the establishment of the proposed reuse framework. Object recapture and creation metrics are explained along with their normalized use in effort, productivity, and quality determination. A single and multiple reuse instance version of a popular cost model is presented which uses these metrics and the measurement scheme proposed to predict the software effort and duration under various reuse assumptions. Studies in using this model to predict actuals taken from the RCI data base of over 1000 completed projects is discussed.

Reifer, Donald J.↗

NASA NTRSDate not supplied

VEDA: Visualization, Exploration, & Data Analysis

NASA's Visualization, Exploration, and Data Analysis (VEDA) project is an open-source science cyberinfrastructure for data processing, visualization, exploration, and geographic information systems (GIS) capabilities. Developed collaboratively and mostly reusing existing open-source components, VEDA consolidates GIS delivery mechanisms, processing platforms, analysis services, and visualization tools and provides an ecosystem of open tools for addressing Earth science research and application needs through the public-facing VEDA Dashboard. In this presentation, Dr. Freitag will provide an overview of VEDA and how it can potentially serve the AOS community.

Brian Freitag↗

NASA NTRS2003

Frequency Reuse, Cell Separation, and Capacity Analysis of VHF Digital Link Mode 3 TDMA

The most recent studies by the Federal Aviation Administration (FAA) and the aviation industry have indicated that it has become increasingly difficult to make new VHF frequency or channel assignments to meet the aviation needs for air-ground communications. FAA has planned for several aggressive improvement measures to the existing systems, but these measures would not meet the projected voice communications needs beyond 2009. FAA found that since 1974 there has been, on the average, a 4 percent annual increase in the number of channel assignments needed to satisfy the air-ground communication traffic (approximately 300 new channel assignments per year). With the planned improvement measures, the channel assignments are expected to reach a maximum number of 16615 channels by about 2010. Hence, the FAA proposed the use of VDL Mode 3 as a new integrated digital voice and data communications systems to meet the future air traffic demand. This paper presents analytical results of frequency reuse; cell separation and capacity estimation of VDL Mode 3 TDMA systems that FAA has planned to implement the future VHF air-ground communications system by the year 2010. For TDMA, it is well understood that the frequency reuse factor is a crucial parameter for capacity estimation. Formulation of this frequency reuse factor is shown, taking into account the limitation imposed by the requirement to have a sufficient Signal to Co-Channel Interference Ratio. Several different values for the Signal to Co-Channel Interference Ratio were utilized corresponding to the current analog VHF DSB-AM systems, and the future digital VDL Mode 3. The required separation of Co-Channel cells is computed for most of the Frequency Protected Service Volumes (FPSV's) currently in use by the FAA. Additionally, the ideal cell capacity for each FPSV is presented. Also, using actual traffic for the Detroit air space, a FPSV traffic distribution model is used to generate a typical cell for channel capacity prediction. Such prediction is useful for evaluating the improvement of future VDL Mode 3 deployment and capacity planning.

Shamma, Mohammed A.↗

NASA NTRS1990

Verifying an interactive consistency circuit: A case study in the reuse of a verification technology

The work done at ORA for NASA-LRC in the design and formal verification of a hardware implementation of a scheme for attaining interactive consistency (byzantine agreement) among four microprocessors is presented in view graph form. The microprocessors used in the design are an updated version of a formally verified 32-bit, instruction-pipelined, RISC processor, MiniCayuga. The 4-processor system, which is designed under the assumption that the clocks of all the processors are synchronized, provides software control over the interactive consistency operation. Interactive consistency computation is supported as an explicit instruction on each of the microprocessors. An identical user program executing on each of the processors decides when and on what data interactive consistency must be performed. This exercise also served as a case study to investigate the effectiveness of reusing the technology which was developed during the MiniCayuga effort for verifying synchronous hardware designs. MiniCayuga was verified using the verification system Clio which was also developed at ORA. To assist in reusing this technology, a computer-aided specification and verification tool was developed. This tool specializes Clio to synchronous hardware designs and significantly reduces the tedium involved in verifying such designs. The tool is presented and how it was used to specify and verify the interactive consistency circuit is described.

Bickford, Mark↗

NASA NTRS1993

Software reuse in spacecraft planning and scheduling systems

The use of a software toolkit and development methodology that supports software reuse is described. The toolkit includes source-code-level library modules and stand-alone tools which support such tasks as data reformatting and report generation, simple relational database applications, user interfaces, tactical planning, strategic planning and documentation. The current toolkit is written in C and supports applications that run on IBM-PC's under DOS and UNlX-based workstations under OpenLook and Motif. The toolkit is fully integrated for building scheduling systems that reuse AI knowledge base technology. A typical scheduling scenario and three examples of applications that utilize the reuse toolkit will be briefly described. In addition to the tools themselves, a description of the software evolution and reuse methodology that was used is presented.

Mclean, David↗

NASA NTRS1998

Development of a Low Cost Data Acquisition System for the Solid Rocket Booster Program

The Space Transportation System's (STS) Solid Rocket Boosters (SRBs) experience a severe environment during their brief flight. During the last few years several SRB's have sustained noticeable structural damage. The environmental characteristics (vibration, structure, and thermal) encountered by the SRB's during ascent, descent and water impact are in most cases unknown. A developmental flight instrumentation (DFI) system collected data from the SRB's first four flights in the early 1980's, and after the first three flights during the shuttle return-to-flight phase after the Challenger accident. However, the DFI data collected are of low fidelity and do not correlate well with the observed structural damage. The DFI system was evaluated for reuse, but the cost to fly it was prohibitive. The STS is presently scheduled to fly until 2030. To support the STS schedule the avionics on SRB's will be upgraded. The environments on the different sections of the SRB will need to be defined to properly qualify the avionics for multiple flights. The DFI data previously gathered does not provide enough information to properly qualify the avionics. Marshall Space Flight Centers (MSFC) SRB Project Office requested the Science and Engineering Directorate to develop a self contained data acquisition system that could collect data from any area of the booster. This paper summarizes the effort to develop, test, qualify and fly an Enhanced Data Acquisition System (EDAS) using state-of-the-art commercial off the shelf (COTS) equipment. The first flight of this system occurred on shuttle mission STS-91 in June 1998.

Crawford, Kevin↗

NASA NTRS2014

The CCSDS Next Generation Space Data Link Protocol (NGSLP)

The CCSDS space link protocols i.e., Telemetry (TM), Telecommand (TC), Advanced Orbiting Systems (AOS) were developed in the early growth period of the space program. They were designed to meet the needs of the early missions, be compatible with the available technology and focused on the specific link environments. Digital technology was in its infancy and spacecraft power and mass issues enforced severe constraints on flight implementations. Therefore the Telecommand protocol was designed around a simple Bose, Hocquenghem, Chaudhuri (BCH) code that provided little coding gain and limited error detection but was relatively simple to decode on board. The infusion of the concatenated Convolutional and Reed-Solomon codes5 for telemetry was a major milestone and transformed telemetry applications by providing them the ability to more efficiently utilize the telemetry link and its ability to deliver user data. The ability to significantly lower the error rates on the telemetry links enabled the use of packet telemetry and data compression. The infusion of the high performance codes for telemetry was enabled by the advent of digital processing, but it was limited to earth based systems supporting telemetry. The latest CCSDS space link protocol, Proximity-1 was developed in early 2000 to meet the needs of short-range, bi-directional, fixed or mobile radio links characterized by short time delays, moderate but not weak signals, and short independent sessions. Proximity-1 has been successfully deployed on both NASA and ESA missions at Mars and is planned to be utilized by all Mars missions in development. A new age has arisen, one that now provides the means to perform advanced digital processing in spacecraft systems enabling the use of improved transponders, digital correlators, and high performance forward error correcting codes for all communications links. Flight transponders utilizing digital technology have emerged and can efficiently provide the means to make the next leap in performance for space link communications. Field Programmable Gate Arrays (FPGAs) provide the capability to incorporate high performance forward error correcting codes implemented within software transponders providing improved performance in data transfer, ranging, link security, and time correlation. Given these synergistic technological breakthroughs, the time has come to take advantage of them in applying them to both on going (e.g., command, telemetry) and emerging (e.g., space link security, optical communication) space link applications. However one of the constraining factors within the Data Link Layer in realizing these performance gains is the lack of a generic transfer frame format and common supporting services amongst the existing CCSDS link layer protocols. Currently each of the four CCSDS link layer protocols (TM, TC, AOS, and Proximity-1) have unique formats and services which prohibits their reuse across the totality of all space link applications of CCSDS member space agencies. For example, Mars missions. These missions implement their proximity data link layer using the Proximity-1 frame format and the services it supports but is still required to support the direct from Earth (TC) protocols and the Direct To Earth (AOS/TM) protocols. The prime purpose of this paper, is to describe a new general purpose CCSDS Data Link layer protocol, the NGSLP that will provide the required services along with a common transfer frame format for all the CCSDS space links (ground to/from space and space to space links) targeted for emerging missions after a CCSDS agency-wide coordinated date. This paper will also describe related options that can be included for the Coding and Synchronization sub-layer of the Data Link layer to extend the capacities of the link and additionally provide an independence of the transfer frame sub-layer from the coding sublayer. This feature will provide missions the option of running either the currently performed synchronous coding and transfer frame data link or an asynchronous coding/frame data link, in which the transfer frame length is independent of the block size of the code. The benefits from the elimination of this constraint (frame synchronized to the code block) will simplify the interface between the transponder and the data handling equipment and reduce implementation costs and complexities. The benefits include: inclusion of encoders/decoders into transmitters and receivers without regard to data link protocols, providing the ability to insert latency sensitive messages into the link to support launch, landing/docking, telerobotics. and Variable Coded Modulation (VCM). In addition the ability to transfer different sized frames can provide a backup for delivering stored anomaly engineering data simultaneously with real time data, or relaying of frames from various sources onto a trunk line for delivery to Earth.

Kazz, Greg J.↗

NASA NTRS1989

Integrating automated support for a software management cycle into the TAME system

Software managers are interested in the quantitative management of software quality, cost and progress. An integrated software management methodology, which can be applied throughout the software life cycle for any number purposes, is required. The TAME (Tailoring A Measurement Environment) methodology is based on the improvement paradigm and the goal/question/metric (GQM) paradigm. This methodology helps generate a software engineering process and measurement environment based on the project characteristics. The SQMAR (software quality measurement and assurance technology) is a software quality metric system and methodology applied to the development processes. It is based on the feed forward control principle. Quality target setting is carried out before the plan-do-check-action activities are performed. These methodologies are integrated to realize goal oriented measurement, process control and visual management. A metric setting procedure based on the GQM paradigm, a management system called the software management cycle (SMC), and its application to a case study based on NASA/SEL data are discussed. The expected effects of SMC are quality improvement, managerial cost reduction, accumulation and reuse of experience, and a highly visual management reporting system.

Sunazuka, Toshihiko↗

NASA NTRS1990

A prototype computer-aided modelling tool for life-support system models

Based on the canonical decomposition of physical-chemical-biological systems, a prototype kernel has been developed to efficiently model alternative life-support systems. It supports (1) the work in an interdisciplinary group through an easy-to-use mostly graphical interface, (2) modularized object-oriented model representation, (3) reuse of models, (4) inheritance of structures from model object to model object, and (5) model data base. The kernel is implemented in Modula-II and presently operates on an IBM PC.

Preisig, H. A.↗

NASA NTRS1993

Architecture-driven reuse of code in KASE

In order to support the synthesis of large, complex software systems, we need to focus on issues pertaining to the architectural design of a system in addition to algorithm and data structure design. An approach that is based on abstracting the architectural design of a set of problems in the form of a generic architecture, and providing tools that can be used to instantiate the generic architecture for specific problem instances is presented. Such an approach also facilitates reuse of code between different systems belonging to the same problem class. An application of our approach on a realistic problem is described; the results of the exercise are presented; and how our approach compares to other work in this area is discussed.

Bhansali, Sanjay↗

NASA NTRS1999

Update of the Development of a Low Cost Data Acquisition System for the Space Shuttle Solid Rocket Booster Program

The space shuttle solid rocket boosters (SRBs) experience a severe environment during their brief flight. During the last few years several SRB's have sustained noticeable structural damage. The environmental characteristics (vibration, structure, and thermal) encountered by the SRB's during ascent, descent and water impact are in most cases unknown. A developmental flight instrumentation (DFI) system collected data from the SRBs' first four flights in the early 1980's, and after the first three flights during the shuttle return-to-flight phase after the Challenger accident. However, the DFI data collected are of low fidelity and do not correlate well with cases of observed structural damage. The DFI system was evaluated for reuse, but the cost to fly it was prohibitive. The space shuttle is presently scheduled to fly until 2030. To support the shuttle flight schedule, avionics on the SRB's will be upgraded. The environments on the different sections of the SRB will need to be defined more completely to properly qualify the avionics for multiple flights. The DFI data previously gathered do not provide enough information to properly qualify the avionics. Marshall Space Flight Center's (MSFC) SRB Project Office requested the Science and Engineering (S&E) Directorate to develop a stand-alone data acquisition system that could collect data from any area of the booster. In answer to this requirement, S&E developed the Enhanced Data Acquisition System (EDAS). To minimize development time and cost, the development team used state-of-the-art commercial off the shelf (COTS) equipment. The first two flights of this system occurred on shuttle mission STS-91 in June 1998 and STS-95 in October 1998. Twenty-one measurements were successfully recorded on the STS-91 right hand booster, providing new accelerometer, strain, temperature, and heating rate data to analysts. Twenty-four measurements were successfully recorded on the STS-95 left hand booster, providing data from the booster and the external tank. This paper summarizes the effort to develop, test, qualify and fly the EDAS to meet SRB flight and data collection requirements.

Crawford, Kevin↗

NASA NTRS1999

Using a Commerical off the Shelf Data Acquisition System for the Space Shuttle Solid Rocket Booster Program

Crawford, Kevin↗

NASA NTRS2009

Life Sciences Data Archive (LSDA) in the Post-Shuttle Era

Now, more than ever before, NASA is realizing the value and importance of their intellectual assets. Principles of knowledge management, the systematic use and reuse of information/experience/expertise to achieve a specific goal, are being applied throughout the agency. LSDA is also applying these solutions, which rely on a combination of content and collaboration technologies, to enable research teams to create, capture, share, and harness knowledge to do the things they do well, even better. In the early days of spaceflight, space life sciences data were been collected and stored in numerous databases, formats, media-types and geographical locations. These data were largely unknown/unavailable to the research community. The Biomedical Informatics and Health Care Systems Branch of the Space Life Sciences Directorate at JSC and the Data Archive Project at ARC, with funding from the Human Research Program through the Exploration Medical Capability Element, are fulfilling these requirements through the systematic population of the Life Sciences Data Archive. This project constitutes a formal system for the acquisition, archival and distribution of data for HRP-related experiments and investigations. The general goal of the archive is to acquire, preserve, and distribute these data and be responsive to inquiries from the science communities.

Fitts, Mary A.↗