SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A set of thin Fe foils was fabricated at GA for non-destructive areal density measurements by X-ray AutoEdge. This experiment was aimed at separate (without including Mg) calibration of Fe areal density parameters by comparing AutoEdge and RBS results.
This paper focuses on the research and development of high-purity germanium (HPGe) crystals for detector fabrication, specifically targeting applications in rare-event physics searches. The primary objective was to produce large-scale germanium crystals weighing >1 kg with a controlled diameter of ∼10 cm and an impurity range of approximately 1010/cm 3. Ensuring structural integrity and excellent crystalline quality requires a thorough assessment of dislocation density, a critical aspect of the crystal development process. Dislocation density measurements play a crucial role in maximizing the sensitivity of HPGe detectors, and our findings confirmed that the dislocation density fell within acceptable ranges for detector fabrication. Additionally, this paper examines the segregation coefficient of various contaminants during the crystal development process. Comprehensive analysis of impurity segregation is essential for reducing contaminant quantities in the crystal lattice and customizing purification processes. This, in turn, minimizes undesired background noise, enhancing signal-to-noise ratios for rare-event physics searches and overall detector performance. The investigation included the segregation coefficients of three major acceptors and one donor in crystals grown at the University of South Dakota, providing valuable insights for optimizing crystal purity and detector efficiency.
In this work we studied OH radical generation in nanosecond dielectric barrier discharge in humid He/air gas. The measurements were carried out by means of laser-induced fluorescence (LIF) method at the PPPL Low Temperature Plasma Research Facility, directed by Dr. Shurik Yatom. Application of LIF towards OH density measurements is a widely used approach in plasmas generated in humid gas, particularly when temporal evolution of OH density is of interest. Here we examined the OH densities generated in the discharge ignited by application of nanosecond high-voltage pulses with amplitudes varying between 10 to 20 kV and interelectrode gap length varying between 0.5-3 mm. The peak voltage and the gap length determine the mode in which discharge is generated: homogenous or filamentary. The measurements of OH in the gas phase were accompanied by the measurements of hydrogen peroxide (H 2 O 2 ) in liquid water, downstream of the plasma and the relationship between these two were examined.
The tidal resource gaps project was created to address a growing body of evidence that models underpredict tidal current speeds compared to measurements at a number of the top-ranking tidal energy sites. In response, this project compared opportunistic tidal power density measurements from 16 tidal energy hot spot sites with estimates from resource assessment data to identify discrepancies. To improve the accuracy of resource estimates from model data, updated data from eight improved model simulations were obtained. Model improvements included grid refinement, domain coupling, and the use of unstructured or nested grids. New resource estimates were calculated from the updated models, and these data were used to update the tidal hot spots-a list of promising tidal energy sites around the United States.
Criticality safety models for aqueous plutonium chloride systems often contain a significant bias due to assumptions in material compositions. These systems are currently modeled as a fictitious metal-water mixture because little is known about the true solution density. Furthermore, no predictive density tools or capabilities for modeling aqueous plutonium chloride systems are approved for use at Los Alamos National Laboratory. Recent density measurements of this ternary system (PuCl 3 -HCl-H 2 O) have allowed for the development of a more realistic density law, which is applied in this work via an empirical method based in Python. This tool, entitled PuCS (Plutonium Chloride Solution tool) may be used to determine solution density and composition based on the plutonium content, acid content, and temperature for MCNP6 inputs. PuCS has been found to predict density within 2% of experimental data. In conclusion, MCNP6 calculations have found that crediting minimal amounts of free acid (0.5 M) may correspond to a ~12% decrease in peak reactivity in comparison to current modeling methods.
Brillouin scattering spectroscopy has been used to obtain an accurate (<1%) ρ-P equation of state (EOS) of 1:1 and 9:1 H 2 -He molar mixtures from 0.5 to 5.4 GPa at 296 K. Our calculated equations of state indicate close agreement with the experimental data right to the freezing pressure of hydrogen at 5.4 GPa. The measured velocities agree on average, within 0.5%, of an ideal mixing model. The ρ-P EOSs presented have a standard deviation of under 0.3% from the measured densities and under 1% deviation from ideal mixing. Furthermore, a detailed discussion of the accuracy, precision, and sources of error in the measurement and analyses of our equations of state is presented.
ABSTRACT Gas plays an important role in many processes in galaxy formation and evolution, but quantifying the importance of gas has been hindered by the challenge to measure gas masses for large samples of galaxies. Data sets of direct atomic and molecular gas measurements are sufficient to establish simple scaling relations, but often not large enough to quantify three-parameter relations, or second-order dependences. As an alternative approach, we derive here indirect cold gas measurements from optical emission lines using photoionization models for galaxies in the Sloan Digital Sky Survey (SDSS) main galaxy sample and the PHANGS-MUSE survey. We calibrate the gas surface density measurements using xCOLD GASS and PHANGS-ALMA molecular gas measurements to ensure that our measurements are reliable. We demonstrate the importance of taking into account the scale dependence of the relation between optical depth (τ V ) and gas surface density (Σ gas ) and provide a general prescription to estimate Σ gas from τ V , metallicity, and the dust-to-metal ratio, at any arbitrary physical resolution. To demonstrate that the indirect cold gas masses are accurate enough to quantify the role of gas in galaxy evolution, we study the mass–metallicity relation of SDSS galaxies and show that as a third parameter gas mass is better than star formation rate at reducing the scatter of the relation, as predicted by models and simulations.
Current aqueous plutonium processing models for criticality safety often contain significant bias due to material modeling assumptions. These solutions include plutonium chloride solutions, which are modeled as fictitious plutonium metal-water mixtures because little is known about the actual density of the solution. Furthermore, there is no current predictive capability for modeling plutonium metal-water mixtures that is approved for use at Los Alamos National Laboratory (LANL). Recent density measurements for aqueous plutonium chloride systems (PuCl 3 -HCl-H 2 O) now allow for the development and application of a more realistic density law. This work develops a Python-based density law for this ternary solution using an empirical method. This code can be used in conjunction with an MCNP6 input to determine the density and composition of a solution based upon user inputs of plutonium concentration, hydrochloric acid concentration, and temperature. The tool allows users to input plutonium and acid content of a solution in terms of molality, molarity, or concentration, and predicts density within the current data range within 1.4% of experimental data. Current preliminary MCNP6 calculations utilizing this tool have demonstrated a minimum decrease in system reactivity of 5% in comparison to the current modeling conventions. Thus, this tool enables more accurate criticality safety operational limits by better crediting chorine content while still maintaining necessary conservatism.
Solute transfer from the liquid to the gas phase in plasmas has been widely used in analytical chemistry often focused on liquid cathode discharges. In this study, we report on time-resolved absolute density measurements of sodium in a glow discharge plasma with a NaCl solution anode using two-photon absorption laser induced fluorescence. The averaged maximum sodium density is found to be similar to the electron density in the discharge consistent with plasma-induced vapor generation. Random sodium flashes were also observed extending into the plasma afterglow and are attributed to sodium particles falling back on the liquid surface. Cataphoresis can explain the location of the maximum sodium density near the cathode side of the electrode gap rather than near the liquid anode region.
Laser-collisional induced fluorescence is used to study the plasma generated by a split-ring resonator discharge under an external cusp shaped magnetic field created by permanent magnets. The electron density and electron temperature are measured for a helium plasma at different pressures, powers, and magnet field strengths. It is found that the magnetic fields produce higher electron temperatures with peak temperatures of ∼3 eV, while the no magnet case has peak temperatures of ∼0.8 eV. Conversely, the peak electron density is obtained in the no magnet case at a value of ∼1.9 × 1011 cm−3. This indicates that the cusp-field did magnetize the electrons, but contrary to expectations, it resulted in a decrease in electron density. This is believed to be due to the magnetic field having negative effects on the resonance of the plasma source.
A pioneering 4-channel, high-k poloidal, millimeter-wave collective scattering system has been successfully developed for the Experimental Advanced Superconducting Tokamak (EAST). Engineered to explore high-k electron density fluctuations, this innovative system deploys a 270 GHz mm-wave probe beam launched from Port K and directed toward Port P (both ports lie on the midplane and are 110° part), where large aperture optics capture radiation across four simultaneous scattering angles. Tailored to measure density fluctuations with a poloidal wavenumber of up to 20 cm -1 , this high-k scattering system underwent rigorous laboratory testing in 2023, and the installation is currently being carried out on EAST. Its primary purpose lies in scrutinizing ion and electron-scale instabilities, such as the electron temperature gradient (ETG) mode, by furnishing measurements of the k θ (poloidal wavenumber) spectrum. This advancement significantly bolsters the capacity to probe high-k electron density fluctuations within the framework of EAST. Finally, beam tracing and data interpretation modules developed for both EAST and NSTX-U high-k scattering diagnostics are described.
The plasma properties of an underwater nanosecond pulsed discharge remain not fully understood despite being extensively studied for several decades. In this work, we focus on the continuum radiation generated in such discharges. The discharge is characterized by power measurements as well as by absolute emission spectroscopy. When observed, Stark broadenings of H α , H β and O (777 nm) are employed for electron number densities measurements. The discharge was generated by a 10 ns main voltage pulse followed by multiple secondary pulses, which last up to 4 μs after the primary pulse. It is shown that a peak power of 3.5 MW and energy of 35 mJ is coupled during the main voltage pulse. A quantitative estimation of the different possible continuum radiation sources is performed through analytical calculations. This includes emission (blackbody, free–bound and free–free bremsstrahlung radiations) and absorption (electron–ion and electron–neutral free–free inverse bremsstrahlung) mechanisms. Our results suggest that electron–neutral free–free bremsstrahlung is the principal mechanism responsible for the strong continuum radiation observed experimentally during the primary pulse. We also show that self-absorption through electron–neutral (and electron–ion) inverse bremsstrahlung plays an important role in the main discharge pulse. Further, our results indicate the non-negligible additional contribution of the H 2 continuum during the first reflected pulse which is likely ignited in bubbles generated by the first discharge pulse.
ABSTRACT We measure the mean-squared polarization fraction of a sample of 6282 Galactic cold clumps at 353 GHz, consisting of Planck Galactic cold clump (PGCC) catalogue category 1 objects [flux densities measured with signal-to-noise ratio (S/N) > 4]. At 353 GHz, we find the mean-squared polarization fraction, which we define as the mean-squared polarization divided by the mean-squared intensity, to be (4.79 ± 0.44) × 10−4 equation to an $11\, \sigma$ detection of polarization. We test if the polarization fraction depends on the clumps’ physical properties, including flux density, luminosity, Galactic latitude, and physical distance. We see a trend towards increasing polarization fraction with increasing Galactic latitude, but find no evidence that polarization depends on the other tested properties. The Simons Observatory, with angular resolution of order 1 arcmin and noise levels between 22 and $54\, \mu$K−arcmin at high frequencies, will substantially enhance our ability to determine the magnetic field structure in Galactic cold clumps. At $\ge 5\, \sigma$ significance, we predict the Simons Observatory will detect at least ∼12 000 cold clumps in intensity and ∼430 cold clumps in polarization. This number of polarization detections would represent a two orders of magnitude increase over the current Planck results. We also release software that can be used to mask these Galactic cold clumps in other analyses.
The equilibrium flows of a plasma discharge in a dipole magnetic field are a topic of interest in low temperature plasma physics. Experimentalists typically rely on probe-based and line-integrated diagnostic techniques in these environments to describe plasma behavior. Presented here are measurements of argon ion dynamics with laser induced fluorescence techniques to provide insight into plasma dynamics in dipole magnetic fields with nonperturbative, spatially localized measurements. Simulation results from a Lagrangian approach to track particle orbits are compared to measured density profiles and provide evidence to support the mechanism distinguishing experimental configurations is the initial approach of particles. Applying a negative DC bias to the magnet induces strong E×B flows around the magnet, even exceeding the ion acoustic speed as measured far from the magnet. A strong enough bias also produces two distinct ion populations and provides a method for controlling the density gradient on the equator.
Abstract Plasma-liquid interactions have been extensively studied with a focus on the transport of reactive species from the plasma to the liquid phase and their induced liquid phase chemistry and resulting applications. While solute transfer from the liquid to the gas phase in plasmas has been widely used in analytical chemistry, the underlying processes remain relatively unexplored. We report spatially and temporally resolved absolute density measurements of sodium in a plasma with a NaCl solution cathode using two-photon absorption laser induced fluorescence (TaLIF). The observed non-linear increase in sodium density with solution conductivity is shown to correlate with droplet generation as visualized by Mie scattering. The findings are explained by droplet generation by electrospray induced by Taylor cone formation as underpinning mechanism for the introduction of sodium in the plasma. An analytical sheath model combined with a scaling law shows an increase in electric field force with solution conductivity that is consistent with the observed non-linear increase in sodium density in the plasma with solution conductivity.
Since solids are only sometimes seen en masse in a pure bulk form, and for liquids other than water almost never, a capability to model reflectance spectra from analytes deposited on various substrates would be highly advantageous. If available, the real, n ( ν ) , and imaginary, k ( ν ) , components of the complex refractive index, n n + i k , can be used to simulate infrared spectra, accounting for reflection, refraction, and absorption phenomena as a function of wavelength. We focus on using the Pacific Northwest National Laboratory (PNNL) derived n / k vectors for solid and liquid analytes deposited as thin layers on different types of substrates including conductors, such as aluminum, and inorganic dielectrics, such as glass. The model is an adaptation of the Monte Carlo ray trace modeling program, TracePro, extended through the use of its macrolanguage. The model is tested using thin films of organic liquids including silicone oil and no. 2 diesel fuel, as well as organic solids such as caffeine and acetaminophen on aluminum and glass. The predicted spectra for the solid films were compared to experimental hemispherical reflectance data measured using a Fourier transform spectrometer with an integrating sphere. The thickness of the calculated layer is a parameter for predicting the (transflectance) spectra and is obtained using the areal density measured from gravimetric methods to generate the thin-layer samples. Comparison of the calculated spectra with experimental hemispherical reflectance data shows excellent agreement, indicating promise for the use of measured n / k data to synthesize reference spectral data. In particular, accounting for the inhomogeneity of the deposits greatly improved the match with experimental data. Finally, the theoretical modeling shows that for thicker layers (ca. 20 to 100 μm) of typical organics possessing moderately strong k values, the longwave infrared features are often saturated and better spectral contrast is obtained from the overtone/combination bands in the shortwave infrared.
To standardize materials and component characterization for next generation hydrogen production and energy generation solid oxide cell (SOC) technologies, test protocols are being established to facilitate comparison across the numerous laboratories and research institutions where SOC development for application in solid oxide fuel cells (SOFCs) and solid oxide electrolyzes cells (SOEC) is conducted. This paper proposes guiding protocols for fundamental electrical properties characterization of SOC materials, including temperature- and oxygen partial pressure (pO 2 )-dependent conductivity measurements, and use of the electromotive force for determining the transference numbers, or contributions of each charge carrier (i.e., ions and electrons), to the total conductivity. The protocol for Archimedes density measurements is also provided as an integral technique to both of these methods.
Epitaxially strained germanium-on-silicon (Ge-on-Si) heterostructures are central to next-generation photonic and electronic devices, yet their performance remains strongly constrained by defect-limited carrier lifetimes. In this work, we investigate the impact of defects on the carrier lifetime in relaxed Ge-on-Si and strained Ge-on-Si heterostructures. High-resolution X-ray diffraction quantifies the strain-state in Ge and reveals signatures of strain relaxation due to lattice mismatch. Cross-sectional and plan-view transmission electron microscopy analyses enable direct visualization of interfacial defects and quantification of threading dislocation densities (TDDs) within the Ge layer. However, the presence of a dense misfit dislocation network obscures the threading dislocation signatures, preventing reliable TDD determination by plan-view transmission electron microscopy in strained-Ge (..epsilon..-Ge). To assess the defect density in this case, etch-pit density measurements were performed, providing an alternative means of quantifying the TDDs in the ..epsilon..-Ge layer. Carrier lifetime measurements by microwave-reflection photoconductive decay reveal a clear relationship with TDDs ranging from 5 x 103 cm-2 to 2 x 1010 cm-2, confirming Shockley-Read-Hall recombination as the limiting mechanism at lower defect densities, with TDD-dominated recombination at higher defect densities. The Ge-on-Si relaxed heterostructure exhibited lifetimes much lower (~12 ns) than the lattice-matched Ge on gallium arsenide (GaAs) (~158 ns) heterostructure. Introducing controlled tensile strain reduces defect formation, suppresses strain-relaxation pathways, and leads to measurable improvements in minority carrier lifetime from 12 ns to 171 ns. These results establish a direct relation between defect suppression and carrier recombination dynamics in both relaxed Ge-on-Si grown directly on Si and strained Ge-on-Si heterostructures incorporating compound-semiconductor buffer layers, offering a materials-driven pathway for engineering Ge with improved carrier lifetime for photonic applications.