Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffusion Couple”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Diffusion and localization of a particle in a periodic potential coupled to a dissipative environment

The phase diagram of a Hamiltonian which describes a particle moving in a periodic potential and coupled to an external heat bath has been analyzed in detail. By renormalization-group methods, it is proved that this system exhibits an unusual transition between diffusive behavior and a self-trapped phase. The dynamics along the transition line is shown to be integrable and the order parameter, the mobility, is computed exactly.

Guinea, F.↗
NASA NTRS1979

On the kinetics of volatile loss from chondrites

Data by Lipschutz and coworkers (1975, 1976, 1977) on thermal release of Tl, Bi, and In from primitive chondrites are reexamined to obtain information on the nature and activation energy (E) of release processes: desorption, volume diffusion, and decomposition of the host phase. For the Allende C3 chondrite, the main release for Bi and Tl between 400 and 700 C is shown to be apparently due to desorption of a surface layer, coupled with grain boundary diffusion as the slow step. Further, the main release of In above 600 C and the small tails of Bi and Tl between 700 and 1000 C are observed to represent probably volume diffusion. Results for Abee and other primitive meteorites were found to be essentially similar, except for a very abrupt 500 C release of Tl from Krymka (81%) and Bi from Tieschitz (70%). It is suggested that this release may represent decomposition of a thermolabile phase in a late condensate, such as organic matter or phyllosilicates.

Alaerts, L.↗
NASA NTRS2006

Blended Wing Body (BWB) Boundary Layer Ingestion (BLI) Inlet Configuration and System Studies

A study was conducted to determine the potential reduction in fuel burned for BLI (boundary layer ingestion) inlets on a BWB (blended wing body) airplane employing AFC (active flow control). The BWB is a revolutionary type airplane configuration with engines on the aft upper surface where thick boundary layer offers the greatest opportunity for ram drag reduction. AFC is an emerging technology for boundary layer control. Several BLI inlet configurations were analyzed in the NASA-developed RANS Overflow CFD code. The study determined that, while large reductions in ram drag result from BLI, lower inlet pressure recovery produces engine performance penalties that largely offset this ram drag reduction. AFC could, however, enable a short BLI inlet that allows surface mounting of the engine which, when coupled with a short diffuser, would significantly reduce drag and weight for a potential 10% reduction in fuel burned. Continuing studies are therefore recommended to achieve this reduction in fuel burned considering the use of more modest amounts of BLI coupled with both AFC and PFC (Passive Flow Control) to produce a fail-operational system.

Kawai, Ronald T.↗
NASA NTRS1975

Chemical potential effects on neutrino diffusion in supernovae

The validity of imposing a zero chemical potential for neutrinos in hydrodynamic calculations of collapsing supernovae is investigated in the diffusion approximation of neutrino transport. A coupled system of equations is solved for neutrino and energy diffusion fluxes as well as lepton diffusion in a collapsing supernovae ambient medium, and the results indicate a substantial growth in the neutrino chemical potential for densities greater than 10 to the 12th power gm/cu cm. The rate of energy transport is shown to be significantly affected by increases in Fermi integrals and chemical-potential gradients accompanied by decreases in temperature, and the extent of neutrino particle/antiparticle reactions is found also to affect energy diffusion rates. It is concluded that the photon-like behavior usually assumed for neutrinos may be incorrect and that an extension of the Sn transport approximation to include lepton characteristics is necessary for a definitive answer to the question of neutrino transport in supernovae.

Mazurek, T. J.↗
NASA NTRS1994

Interactions between solidification and compositional convection in mushy layers

Mushy layers are ubiquitous during the solidification of alloys. They are regions of mixed phase wherein solid crystals are bathed in the melt from which they grew. The matrix of crystals forms a porous medium through which the melt can flow, driven either by external forces or by its own buoyancy in a gravitational field. Buoyancy-driven convection of the melt depends both on temperature gradients, which are necessary for solidification, and on compositional gradients, which are generated as certain components of the alloy are preferentially incorporated in the solid phase and the remaining components are expelled into the melt. In fully liquid regions, the combined action of temperature and concentration on the density of the liquid can cause various forms of double-diffusive convection. However, in the interior of mushy regions the temperature and concentration are thermodynamically coupled so only single-diffusive convection can occur. Typically, the effect of composition on the buoyancy of the melt is much greater than the effect of temperature, and thus convection in mushy layers in driven primarily by the computational gradients within them. The rising interstitial liquid is relatively dilute, having come from colder regions of the mushy layer, where the liquidus concentration is lower, and can dissolve the crystal matrix through which it flows. This is the fundamental process by which chimneys are formed. It is a nonlinear process that requires the convective velocities to be sufficiently large, so fully fledged chimneys (narrow channels) might be avoided by means that weaken the flow. Better still would be to prevent convection altogether, since even weak convection will cause lateral, compositional inhomogeneities in castings. This report outlines three studies that examine the onset of convection within mushy layers.

Worster, M. Grae↗
DOE OSTI2024

A Second Moment Method for k -Eigenvalue Acceleration with Continuous Diffusion and Discontinuous Transport Discretizations

The second moment method is a linear acceleration technique that couples the transport equation to a diffusion equation with transport-dependent additive closures. The resulting low-order diffusion equation can be discretized independent of the transport discretization, unlike diffusion synthetic acceleration, and is symmetric positive definite, unlike quasidiffusion. While this method has been shown to be comparable to quasidiffusion in iterative performance for fixed source and time-dependent problems, it is largely unexplored as an eigenvalue problem acceleration scheme due to the belief that the resulting inhomogeneous source makes the problem ill posed. Recently, a preliminary feasibility study was performed on the second moment method for eigenvalue problems. The results suggested comparable performance to quasidiffusion and more robust performance than diffusion synthetic acceleration. This work extends the initial study to more realistic reactor problems using state-of-the-art discretization techniques. Finally, the results in this paper show that the second moment method is more computationally efficient than its alternatives on complex reactor problems with unstructured meshes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1989

Jupiter's radiation belt ions - A comparison of theory and observation

Radial profiles are constructed for the Jovian radiation belt flux-tube content Y-asterisk from the reported phase-space density of energetic particles obtained from Voyager 1 data over the range L = 6 to L = 9. These experimental profiles are compared with theoretical solutions for Y-asterisk from an interchange-diffusion model of the coupled radiation belt and Iogenic ion populations. Subject to certain limitations of the Voyager 1 data, the model solutions are found to be consistent with the data for a variety of input parameters. Model solutions are also found corresponding to radiation belt ions that are expected to be mainly responsible for the auroral energy input. Comparison of the present theoretical profiles with the data implies that the energetic radiation belt ions should have a peak loss rate within a factor of three of that for strong diffusion scattering.

Summers, Danny↗
DOE OSTI2026

Chemo-Mechanics of α-V 2 O 5 During Lithiation and Implications for Rechargeable Battery Cathodes

Chemo-mechanical degradation of layered oxide electrodes is strongly influenced by crystallographic anisotropy, local stress evolution, and ion insertion, yet the intrinsic mechanical response of layered materials remains incompletely understood. Indeed, most prior studies have focused on polycrystalline materials but single crystals enable direct observation of coupling between anisotropic ion diffusion and mechanical response. This study aims to determine how crystallographic anisotropy and lithiation affect deformation, fracture, and mechanical properties in single-crystal V 2 O 5 , and compares this behavior with polycrystalline counterparts. Polycrystalline V 2 O 5 thin films and single-crystal α-V 2 O 5 were studied using nanoindentation, scanning electron microscopy, focused ion beam cross-sectioning, and Raman spectroscopy. Single crystals were tested in pristine and chemically lithiated states, including experiments in which crystals were first plastically deformed via nanoindentation and subsequently lithiated. Polycrystalline films exhibited significantly higher hardness and elastic modulus than single crystals. Single crystals indented normal to the exposed (001) basal plane exhibited pronounced anisotropic deformation, including directional slip, crystallographically-guided cracking, anisotropic crack propagation, interlayer separation, and shear localization. Lithiation caused substantial softening, reduced hardness and modulus, and suppressed displacement bursts during nanoindentation, while previously indented regions showed crack formation and growth upon lithiation. Mechanical behavior of α-V 2 O 5 is strongly governed by crystallographic anisotropy and further altered by lithiation, with pre-existing deformation serving as a strong driver of fracture during ion insertion. These findings illuminate the coupling among ion insertion, deformation, and fracture in layered oxides and provide a basis for understanding and mitigating mechanical failure in electrochemical energy-storage materials.

Anisotropy↗
DOE OSTI2025

Unravelling Microstructure Selection in an Additively Manufactured Eutectic High‐Entropy Alloy

High-entropy alloys (HEAs) are promising candidates for advanced structural applications due to their excellent mechanical properties. Additive manufacturing (AM), with its rapid solidification conditions, enables the creation of unique nonequilibrium microstructures. To fully leverage the synergy between AM and HEAs, understanding how processing affects structure and properties is essential. Here, how solidification rate influences microstructure evolution and phase transformation pathway in laser additively manufactured AlCrFe2Ni2 eutectic HEAs is investigated. By increasing the laser scan speed and hence the solidification rate, distinct solidification modes evolving from coupled eutectic to anomalous eutectic and eventually to single-phase solidification are revealed. These transitions result in distinct microstructures and a wide range of mechanical properties. Thermodynamic modeling and molecular dynamics simulations reveal that low cooling rates allow for sufficient atomic diffusion and phase separation, facilitating coupled eutectic growth. In contrast, rapid cooling suppresses diffusion and destabilizes the solid–liquid interface, promoting anomalous or single-phase solidification. This integrated experimental and computational approach provides a multiscale understanding of solidification mechanisms in HEAs and underscores how kinetic effects can over-ride thermodynamic predictions under nonequilibrium conditions. Furthermore, these results demonstrate that AM can serve as a powerful tool to design HEAs with tailored microstructures and properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Transport of Delocalized Excitons through DNA-Based Molecular Photonic Wires

Molecular photonic wires conduct electronic energy via their rapid transport properties. In photosynthesis, nature achieves efficient transport across large distances using delocalized excitons, generated by strong excitonic coupling between chromophores. How, or even whether, delocalization facilitates long-distance energy transport in synthetic systems has been challenging to experimentally test and optimize. Thus, far, studies have been limited to strongly coupled, heterogeneous chromophore aggregates or weakly coupled chromophore monomers. Here, in this work, we employed DNA nanostructures to engineer molecular photonic wires constructed from a series of excitonically coupled indocarbocyanine chromophores─achieving the intermediate and strong coupling regimes. Using time-resolved fluorescence spectroscopy and complementary simulations, we demonstrated that an intermediate intermolecular electronic coupling (∼ k B T ) enables up to 40% faster exciton transport as compared to strongly coupled chromophores. The delocalized excitons generated in the intermediate coupling regime exhibited properties conducive to rapid diffusivity, similar to their monomeric counterparts. Thus, intermediate excitonic coupling, analogous to natural systems, achieves long-distance exciton transport with the high chromophore density required for energy capture.

DNA origami↗
DOE OSTI2025

A Comparison of Electronic Structure Methods for Predicting the Hydrogenation Energies of Candidate Molecules for Hydrogen Storage

The development of novel energy materials and fuels is required to expand current available energy sources. Aiming to reach this goal, there is growing interest in using molecular hydrogen as an energy carrier due to its abundance and high energy density. Liquid organic hydrogen carriers (LOHCs) are a promising route to the large-scale storage and transport of hydrogen for use in the energy economy. The search for thermodynamically viable LOHC molecules for real world use has led to a set of constraints on the dehydrogenation enthalpy and the minimum gravimetric hydrogen capacity. These constraints allow one to formulate the search for an ideal LOHC candidate molecule as an optimization problem well suited to the strengths of machine learning and artificial intelligence computational approaches. A critical barrier to a large-scale, high-throughput screening of LOHC candidate molecules is the lack of reliable training data. Computational electronic structure methods including density functional theory, coupled cluster approximations, and diffusion Monte Carlo can be used to provide training data where experimental data are either unreliable or do not exist. In this work, we use these methods to calculate the dehydrogenation energies and enthalpies of candidate LOHC molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Complete quasilinear model for the acceleration-driven lower hybrid drift instability and a computational assessment of its validity

A complete quasilinear model is derived for the electrostatic acceleration-driven lower hybrid drift instability in a uniform two-species low-beta plasma in which current is perpendicular to the background magnetic field. The model consists of coupled nonlinear velocity space diffusion equations for the volume-averaged ion and electron distribution functions. Each species' diffusion coefficient depends on a time-evolving spectral density of the electric-field energy per unit volume and a time-evolving dispersion relation. The dispersion relation is expressed analytically in integral form without the use of asymptotic limits and applies to arbitrary distribution functions, so long as they can be expressed as a function of one velocity coordinate, e.g., f⁡(vy) or f⁡(v⊥). The quasilinear model conserves energy and is complete in that it fully describes the evolution of the distribution functions, including resonant and nonresonant particle-wave interactions, while accounting for distribution-function-dependent mixed-complex frequencies. Further, the quasilinear diffusion model is solved numerically and self-consistently using a Crank-Nicolson temporal discretization and a second-order finite-volume velocity-space discretization. Numerical solutions are compared to nonlinear fourth-order accurate continuum kinetic Vlasov-Poisson simulations. Evolution of electric-field energy, growth rates, distribution functions, and diffusion coefficients are shown to be in agreement with Vlasov simulations. The quasilinear model is shown to predict anomalous transport terms, like resistivity and heating, to within a factor of order unity. Discrepancies between the quasilinear model and Vlasov simulations are assessed and attributed primarily to lack of damping in the quasilinear description and to the use of unperturbed-orbit susceptibilities in the linear theory dispersion relation. The results illuminate the predictive accuracy of the quasilinear model, place approximate bounds on its validity, and provide much needed vetting of quasilinear theory's ability to predict the nonlinear state of a microturbulent plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Destructive PIE and Safety Testing of Six AGR-5/6/7 Capsule 2 Compacts

This study evaluates fission product retention and particle failure mechanisms in AGR-5/6/7 Capsule 2 uranium carbide and uranium oxide (UCO) tristructural isotropic (TRISO) fuel under high-temperature gas reactor accident-relevant conditions using high-temperature safety tests and destructive postirradiation examination. Three Capsule 2 compacts were held isothermally at 1600°C for approximately 300 hours and one compact at 1800°C for approximately 300 hours; two additional compacts were examined in the as-irradiated state. Post-test deconsolidation–leach–burn–leach (DLBL) quantified nuclide inventories in matrix and particles. Individual particles were surveyed for radioisotope inventories, and microanalytical approaches resolved microstructural evolution and fission product distributions within the coating layers. At 1600°C, no krypton was detected above the minimum detectable limit, and cesium releases were far below a single particle equivalent, indicating the absence of full TRISO failure or SiC failures. Silver releases were limited and primarily reflected depleted postirradiation inventories, consistent with prior compact-level exams indicating substantial in-pile 110mAg loss. At 1800°C, cumulative 134Cs release of approximately 2.5 particle equivalents and delayed 85Kr totaling approximately 0.53 particle equivalents were consistent with one full TRISO failure and two SiC failures. Europium and strontium releases were roughly one order of magnitude higher than at 1600°C and comparable to AGR-1/AGR-2 high-temperature tests, with sustained late-hold rates indicating diffusion through intact coatings coupled with matrix depletion. Overall, AGR-5/6/7 Capsule 2 UCO fuel demonstrated fission product retention during safety testing consistent with prior AGR campaigns, while distinctive in-pile 110mAg depletion and measurable 1600°C europium loss motivate targeted follow-on studies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Destructive PIE and Safety Testing of Six AGR-5/6/7 Capsule 2 Compacts

This study evaluates fission product retention and particle failure mechanisms in AGR-5/6/7 Capsule 2 uranium carbide and uranium oxide (UCO) tristructural isotropic (TRISO) fuel under high-temperature gas reactor accident-relevant conditions using high-temperature safety tests and destructive post-irradiation examination. Three Capsule 2 compacts were held isothermally at 1600°C for approximately 300 hours and one compact at 1800°C for approximately 300 hours; two additional compacts were examined in the as-irradiated state. Post-test deconsolidation–leach–burn–leach (DLBL) quantified nuclide inventories in matrix and particles. Individual particles were surveyed for radioisotope inventories, and microanalytical approaches resolved microstructural evolution and fission product distributions within the coating layers. At 1600°C, no krypton was detected above the minimum detectable limit, and cesium releases were far below a single particle equivalent, indicating the absence of full TRISO failure or SiC failures. Silver releases were limited and primarily reflected depleted post-irradiation inventories, consistent with prior compact-level exams indicating substantial in-pile 110m Ag loss. At 1800°C, cumulative 134 Cs release of approximately 2.5 particle equivalents and delayed 85 Kr totaling approximately 0.53 particle equivalents were consistent with one full TRISO failure and two SiC failures. Europium and strontium releases were roughly one order of magnitude higher than at 1600°C and comparable to AGR-1/AGR-2 high-temperature tests, with sustained late-hold rates indicating diffusion through intact coatings coupled with matrix depletion. Overall, AGR-5/6/7 Capsule 2 UCO fuel demonstrated fission product retention during safety testing consistent with prior AGR campaigns, while distinctive in-pile 110m Ag depletion and measurable 1600°C europium loss motivate targeted follow-on studies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1974

Unique properties of SBN and their use in a layered optical memory

Holographic storage experiments using crystal Sr(0.75)Ba(0.25)Nb2O6 (SBN 75/25) as a volume-phase holographic medium show that this material is the most sensitive crystalline storage medium yet discovered. An exposure level of 0.003 J/sq cm at 0.488 micron produces a 1% diffraction efficiency in a 5-mm length of crystal. In addition to high recording sensitivity, SBN 75/25 exhibits interesting electric-field induced effects that include electric-field enhanced recording sensitivity and voltage-switchable latent-to-active holographic reconstruction efficiency. These effects are explained in terms of drift and diffusion of photoionized carriers coupled with the nonlinear electrooptic behavior characteristic of this low Curie temperature ferroelectric crystal. A mechanism is proposed that correlates the observed electrically controlled holographic response with the dielectric behavior of the crystal. These interesting effects are used to implement a novel, layered optical memory having no moving parts and having electrical access for writing or reading selected layers.

Thaxter, J. B.↗
NASA NTRS1981

Numerical simulation of reentry flow around the Shuttle Orbiter including real gas effects

The flight environment of a reentry vehicle is predicted from the numerical solution of fluid dynamics equations for the region between the blunt nose and the swept wings. The inviscid portion of the shock layer is modeled by the Euler equations, but the laminar viscous flow adjacent to the wall is modeled by the approximate parabolic Navier-Stokes equations. The approximations made to the axial gradients of pressure and diffusive fluxes enable the coupled inviscid and viscous equations to be solved efficiently along the body axis. The equilibrium air aftbody code contains significant improvements over its predecessor which only considers a perfect gas model and noncircular configurations. The inclusion of numerical damping either explicitly or implicitly has extended its capabilities for predicting flow field around a winged configuration at higher Machs and greater angles of attack. The results are obtained on the cylindrical coordinates and satisfactory for the Shuttle Orbiter at a free-stream Mach number of 22 and an angle of attack of 40 deg. Also discussed are the inviscid formulation and its application for wind-tunnel conditions.

Li, C. P.↗
NASA NTRS1985

A model investigation of the impact of increases in anthropogenic NOx emissions between 1967 and 1980 on tropospheric ozone

The impact of anthropogenic NOx emission on tropospheric ozone has been investigated. Two statistical models were used for estimating annual global emissions of NOx and for driving the trend in the emission for the years 1966-1980. Both models show a steady increase in the NOx emission, except for two brief periods of leveling off: after 1973 and after 1978. The impact was estimated by calculating the rates of emissions as functions of latitude, longitude, and year, with a one-dimensional (latitudinal) model, which included coupled tropospheric photochemistry and diffusive meridional transport. Steady-state photochemical calculations with prescribed NOx emissions appropriate for 1966 and 1980 indicate an ozone increase of 8-11 percent in the Northern Hemisphere, a result compatible with the rise in ozone suggested by the observations.

Dignon, J.↗