Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct numerical simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Direct Numerical Simulations of Transitional/Turbulent Wakes

The interest in transitional/turbulent wakes spans the spectrum from an intellectual pursuit to understand the complex underlying physics to a critical need in aeronautical engineering and other disciplines to predict component/system performance and reliability. Cylinder wakes have been studied extensively over several decades to gain a better understanding of the basic flow phenomena that are encountered in such flows. Experimental, computational and theoretical means have been employed in this effort. While much has been accomplished there are many important issues that need to be resolved. The physics of the very near wake of the cylinder (less than three diameters downstream) is perhaps the most challenging of them all. This region comprises the two detached shear layers, the recirculation region and wake flow. The interaction amongst these three components is to some extent still a matter of conjecture. Experimental techniques have generated a large percentage of the data that have provided us with the current state of understanding of the subject. More recently computational techniques have been used to simulate cylinder wakes, and the data from such simulations are being used to both refine our understanding of such flows as well as provide new insights. A few large eddy and direct numerical simulations (LES and DNS) of cylinder wakes have appeared in the literature in the recent past. These investigations focus on the low Reynolds number range where the cylinder boundary layer is laminar (sub-critical range). However, from an engineering point of view, there is considerable interest in the situation where the upper and/or lower boundary layer of an airfoil is turbulent, and these turbulent boundary layers separate from the airfoil to contribute to the formation of the wake downstream. In the case of cylinders, this only occurs at relatively large unit Reynolds numbers. However, in the case of airfoils, the boundary layer has the opportunity to transition to turbulence on the airfoil surface at a relatively lower unit Reynolds number because the characteristic length of the airfoil is typically one to two orders of magnitude larger than the trailing edge diameter. This transition to turbulence would occur unless there is a strong favorable pressure gradient that results in the boundary layer remaining laminar or transitional over the surface of the airfoil. This presentation will focus on two direct numerical simulations that have been performed at NASA ARC. The first is of a cylinder wake with laminar separating boundary layers. The second is the wake of a flat plate with a circular trailing edge. The upper and lower plate surface boundary layers are both turbulent and statistically identical. Thus the computed wake is symmetric in a statistical sense. This flow is more representative of airfoil wakes than cylinder wakes. Results from the two simulations including flow visualization and turbulence statistics in the near wake will be presented at the seminar.

wakes↗

Edge flame structure in a turbulent lifted flame: A direct numerical simulation study

This paper presents here a statistical analysis of edge flames in a turbulent lifted flame using direct numerical simulation (DNS). To investigate the dynamics of edge flames, a theoretical framework describing the edge-flame propagation velocity as a function of propagation velocities of mixture-fraction and product-mass fraction iso-surfaces at the flame base is used. The correlations between these propagation velocities and several other variables are then studied, including iso-surface curvatures, iso-surface orientations, strain rates, scalar dissipation rate and gradients of product mass fraction. The contribution of these parameters to the overall behaviour of the edge flame is also investigated using conditional averaging on two-dimensional spatial locations at the flame base. The analysis reveals that the tangential and normal strain rates in addition to the curvatures and scalar dissipation rates have significant contributions to the overall behaviour of the edge flame. The elliptical motion of the flame base described in our earlier study is extended to provide a clearer picture of how these various parameters affect the large fluctuations of edge-flame velocity observed at the flame base.

42 ENGINEERING↗

Direct numerical simulations of three-component Rayleigh–Taylor mixing and an improved model for multicomponent reacting mixtures

We present direct numerical simulations of a three-layer Rayleigh–Taylor instability (RTI) problem with a configuration based on the experiments of Suchandra & Ranjan ( J. Fluid Mech. , vol. 974, 2023, A35) and Jacobs & Dalziel ( J. Fluid Mech. , vol. 542, 2005, pp. 251–279). The problem consists of a layer of light fluid between two layers of heavy fluid with an Atwood number of 0.3. These simulations are first validated through comparison with available experimental data. The validated simulations are then utilized to analyse statistics in this three-component flow. First, length scales are examined utilizing spectra and two-point spatial correlations of velocity and species concentration fluctuations. Next, joint probability density functions (p.d.f.s) of species concentration are compared against several model p.d.f.s representing generalizations of the bivariate beta distribution. Notably, the joint p.d.f.s do not appear to be accurately described by a Dirichlet distribution, indicating the marginal distributions do not conform to a beta distribution. Finally, similarity of the present configuration to three-component mixing found in inertial confinement fusion (ICF) applications is exploited to develop and validate an improved model for the impact of multicomponent mixing on thermonuclear (TN) reaction rates. A single time instant from the present simulations is chosen for a TN burn calculation under the hypothetical assumption of ICF materials and temperatures. Total TN output from this second calculation is then compared against the prediction of the improved model. The new model is found to accurately predict TN reaction rates in both premixed and non-premixed configurations.

42 ENGINEERING↗

DIRECT NUMERICAL SIMULATIONS OF REFLECTION-DRIVEN, REDUCED MAGNETOHYDRODYNAMIC TURBULENCE FROM THE SUN TO THE ALFVÉN CRITICAL POINT

We present direct numerical simulations of inhomogeneous reduced magnetohydrodynamic (RMHD) turbulence between the Sun and the Alfvén critical point. These are the first such simulations that take into account the solar-wind outflow velocity and the radial inhomogeneity of the background solar wind without approximating the nonlinear terms in the governing equations. RMHD turbulence is driven by outward-propagating Alfvén waves (z {sup +} fluctuations) launched from the Sun, which undergo partial non-WKB reflection to produce sunward-propagating Alfvén waves (z {sup –} fluctuations). We present 10 simulations with different values of the correlation time τ{sub c{sub sun}{sup +}} and perpendicular correlation length L{sub ☉} of outward-propagating Alfvén waves at the coronal base. We find that between 15% and 33% of the z {sup +} energy launched into the corona dissipates between the coronal base and Alfvén critical point. Between 33% and 40% of this input energy goes into work on the solar-wind outflow, and between 22% and 36% escapes as z {sup +} fluctuations through the simulation boundary at r = r{sub A}. The z {sup ±} power spectra scale like k{sub perpendicular}{sup -α{sup ±}}, where k is the wavenumber in the plane perpendicular to B{sub 0}. In our simulation with the smallest value of τ{sub c{sub sun}{sup +}} (∼2 minutes) and largest value of L{sub ☉} (2 × 10{sup 4} km), we find that α{sup +} decreases approximately linearly with increasing ln (r), reaching a value of 1.3 at r = 11.1 R{sub ☉}. Our simulations with larger values of τ{sub c{sub sun}{sup +}} exhibit alignment between the contours of constant φ{sup +}, φ{sup –}, Ω{sub 0}{sup +}, and Ω{sub 0}{sup -}, where φ{sup ±} are the Elsässer potentials and Ω{sub 0}{sup ±} are the outer-scale parallel Elsässer vorticities.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of direct numerical simulation data of a Mach 4.5 transitional boundary-layer flow

This paper describes the creation, by temporal direct numerical simulation and the analysis based on the Reynolds stress transport equations, of a high-quality data set that represents the laminar-turbulent transition of a high-speed boundary-layer flow. Following Pruett and Zang (1992), and with the help of algorithmic refinements, the evolution of an axial, Mach 4.5 boundary-layer flow along a hollow cylinder is simulated numerically. Favre-averaged Reynolds stress transport equations are derived in generalized curvilinear coordinates and are then specialized to the cylindrical geometry at hand. Reynolds stresses and various turbulence quantities, such as turbulent kinetic energy and turbulent Mach number, are calculated from the numerical data at various stages of the transition process. The kinetic energy 'budgets' are constructed from the transport equations. Various contributing terms for the evolution of kinetic energy, like the rates of production and dissipation, transport, and diffusion, are presented. The compressible dissipation rate is small in comparison with the solenoidal dissipation rate for all times. The pressure-dilatation term is of the same order of magnitude as the compressible dissipation rate.

Dinavahi, Surya P. G.↗

Direct numerical simulation of transition: The spatial approach

The objective of this paper is to review the efforts in spatial direct numerical simulations for transition modeling. Much recent success has been realized in the development of more efficient numerical algorithms as well as a robust downstream boundary condition. Efforts at explaining complex physical phenomena through the use of simulations are reviewed.

Reed, Helen L.↗

Efficient Parallel Algorithm For Direct Numerical Simulation of Turbulent Flows

A distributed algorithm for a high-order-accurate finite-difference approach to the direct numerical simulation (DNS) of transition and turbulence in compressible flows is described. This work has two major objectives. The first objective is to demonstrate that parallel and distributed-memory machines can be successfully and efficiently used to solve computationally intensive and input/output intensive algorithms of the DNS class. The second objective is to show that the computational complexity involved in solving the tridiagonal systems inherent in the DNS algorithm can be reduced by algorithm innovations that obviate the need to use a parallelized tridiagonal solver.

Moitra, Stuti↗

Direct Numerical Simulation of Turbulent Flow Inside a Differentially Heated Composite Cavity

In this work, turbulent flow inside a modified differentially heated cavity at high Rayleigh number (Ra ~ 10 9 ) has been studied through fully resolved direct numerical simulation (DNS) using the high-order spectral element method code Nek5000. The flow configuration includes two separate physical phenomena: the natural recirculation itself, and the flow inside a curved channel. Simulations have been carried out using both the Boussinesq approximation and the low-Mach compressible formulation. Significant discrepancies between the two methods inform of the extreme caution that should be exercised when using the Boussinesq approximation in the limits of its applicability. The DNS solutions are analyzed in terms of polynomial-order convergence and Reynolds stress budgets, and the turbulence quantities and velocity profiles are presented as a reference for the validation of turbulence models.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

MEAN-FIELD MODELING OF AN α{sup 2} DYNAMO COUPLED WITH DIRECT NUMERICAL SIMULATIONS OF RIGIDLY ROTATING CONVECTION

The mechanism of large-scale dynamos in rigidly rotating stratified convection is explored by direct numerical simulations (DNS) in Cartesian geometry. A mean-field dynamo model is also constructed using turbulent velocity profiles consistently extracted from the corresponding DNS results. By quantitative comparison between the DNS and our mean-field model, it is demonstrated that the oscillatory α{sup 2} dynamo wave, excited and sustained in the convection zone, is responsible for large-scale magnetic activities such as cyclic polarity reversal and spatiotemporal migration. The results provide strong evidence that a nonuniformity of the α-effect, which is a natural outcome of rotating stratified convection, can be an important prerequisite for large-scale stellar dynamos, even without the Ω-effect.

79 ASTRONOMY AND ASTROPHYSICS↗

Direct Numerical Simulation of Smooth-Body Flow Separation Around a Ramp

Spanwise-periodic computation of a turbulent flow past a two-dimensional smooth ramp geometry is performed in the form of a direct numerical simulation. The Reynolds number based on the ramp height is about 147,000. A straight section that precedes the smooth ramp allows the incoming turbulent boundary layer to grow under a weak favorable pressure gradient. The boundary layer introduced at the domain inlet has a momentum-thickness based Reynolds number of 2000. The turbulent boundary layer nearing the ramp first interacts with a relatively stronger favorable pressure gradient, followed by a strong adverse pressure gradient. Consequently, the boundary layer experiences a modest acceleration before decelerating and separating. Analysis of the data over this region hints at the formation of an internal layer beneath the accelerated boundary layer. The analysis also reveals that this internal layer forms the origin of the free shear layer that emerges in the deceleration region and separates. The streamwise extent of the separated region is comparable to the ramp length, while the viscous layer thickness near reattachment is about the same as the ramp height; hence, the boundary layer undergoing separation and subsequent reattachment in the present configuration experiences its thickness being amplified by about tenfold. The reattached flow continues to develop further under a diminishing pressure gradient in the recovery region in a similar fashion to a zero pressure gradient turbulent boundary layer.

Turbulence↗

Direct Numerical Simulations of Turbulent Convection: Variable Gravity and Uniform Rotation - Part 1

Turbulent convection may have played a major role in determining the structure and evolution of the primordial solar nebula, but current, incomplete models of convection and turbulence give very different results and remain largely untested in the absence of detailed astronomical observations. Numerical simulations provide an 'experimental' database for comparison with these models, and, to this end, direct numerical simulations of turbulent convection were performed with modifications intended to mimic some of the unique physical features of thin accretion disks, such as the primordial solar nebula: internal heating, a gravitational acceleration that is linearly proportional to the distance from midplane of the nebula, and rapid rotation. Peclet numbers in the simulations are comparable to those in solar nebula models; Rossby numbers in the simulations are an order of magnitude larger than those in solar nebula models because of the unrealistically high Prandtl and low, Reynolds numbers required to resolve all scales of the convective flow. We find that, despite the loss of buoyancy at midplane, turbulent motions easily penetrate the midplane region with little loss of intensity, providing efficient transport of heat and turbulent kinetic energy throughout the interior. A simple mixing length model modified to include rotation is found to give convective heat fluxes for the interior flow in rough agreement with the numerical simulations. We discuss these preliminary results with regard to assumptions about heating distributions and convective heat fluxes made in standard solar nebula models. More definitive comparisons with solar nebula modelling will become possible when more realistic effects of shear, density, stratification, and compression are included.

Cabot, W.↗

Direct numerical simulations of leading-edge receptivity for freestream sound

The objective of this paper is to review our efforts in spatial direct numerical simulations for modeling leading-edge receptivity to freestream sound and vorticity. These results begin to provide the link between the freestream and the initial boundary-layer response and can provide the upstream conditions for further simulations marching through the transition process toward turbulence.

Fuciarelli, David A.↗

Direct numerical simulation of transitional and turbulent flow over a heated flat plate using finite-difference schemes

This report deals with the direct numerical simulation of transitional and turbulent flow at low Mach numbers using high-order-accurate finite-difference techniques. A computation of transition to turbulence of the spatially-evolving boundary layer on a heated flat plate in the presence of relatively high freestream turbulence was performed. The geometry and flow conditions were chosen to match earlier experiments. The development of the momentum and thermal boundary layers was documented. Velocity and temperature profiles, as well as distributions of skin friction, surface heat transfer rate, Reynolds shear stress, and turbulent heat flux, were shown to compare well with experiment. The results indicate that the essential features of the transition process have been captured. The numerical method used here can be applied to complex geometries in a straightforward manner.

Madavan, Nateri K.↗

Direct numerical simulation of a three-dimensional turbulent boundary layer

The effects of transverse strain on an initially two-dimensional turbulent boundary layer are studied in a direct numerical simulation of a planar channel flow with impulsively started transverse pressure gradient. Consistent with experiments in three-dimensional boundary layers, the simulation shows a decrease in the Reynolds shear stress with increasing transverse strain. Also, the directions of the Reynolds shear stress vector and the mean velocity gradient vector were found to differ. In addition, the simulation shows a drop in the turbulent kinetic energy. Terms in the Reynolds stress transport equations were computed. The balances indicate that the decrease in turbulent kinetic energy is a result of a decrease in turbulence production, along with an increase in turbulent dissipation. Intuitive reasoning and current turbulence models would predict an increase in kinetic energy along with increases in production and dissipation rates as a result of increased mean-flow strain rate. Later in the evolution of the flow, both turbulence production and dissipation increase.

Moin, P.↗

Direct numerical simulation of turbulent flow over a backward-facing step

The objectives of this study are as follows: (1) to conduct a direct numerical simulation of turbulent backward facing step flow using inflow and outflow conditions; and (2) to provide data in the form of Reynolds stress budgets for Reynolds averaged modeling. The report presents the basic statistical data and comparisons with the concurrent experiments of Jovic and Driver and budgets of turbulent kinetic energy.

Le, Hung↗

Direct numerical simulation of mechanical response in synthetic additively manufactured microstructures

Additive manufacturing (AM) processes for metals can yield as-built microstructures that vary significantly from their cast or wrought counterparts. These microstructural variations can in turn, have profound effects on the properties of a component. Here, a modeling methodology is presented to investigate microstructurally-influenced mechanical response in additively manufactured structures via direct numeral simulation. Three-dimensional, synthetic voxelized microstructures are generated by kinetic Monte Carlo (kMC) additive manufacturing process simulations performed at four scan speeds to create a thin-wall cylindrical geometry notionally constructed using a concentric-pathed directed energy deposition AM process. The kMC simulations utilize a steady-state molten pool geometry that is held constant throughout the study. Resultant microstructures are mapped onto a highly-refined conformal finite-element mesh of a part geometry. A grain-scale anisotropic crystal elasticity model is then used to represent the constitutive response of each grain. Here, the response of the structure subjected to relatively simple load conditions is studied in order to provide understanding of both the influence of AM processing on microstructure as well as the microstructure's influence on the macroscale mechanical response.

42 ENGINEERING↗