Search NASA⌕ Search

SEARCH · Search NASA

Results for “Discontinuity Factors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Improvement of Numerical Methods in Pronghorn

During the fiscal year of 2021, the finite-volume method (FVM) was deployed in Pronghorn to provide improved efficiency, stability, and accuracy for coarse-mesh, thermal-hydraulics problems. While the main goals of fiscal year 2021 were met, several issues emerged from the early deployment of the finite-volume method in Pronghorn. These issues were: The compressible and incompressible formulations that were implemented are inadequate for many nuclear reactor flow problems; Omission of terms accounting for the porosity and Darcy-Forchheimer body force discontinuities in the Rhie-Chow interpolation lead to oscillations in pressure and velocity at these discontinuities; The FVM lacks a correction for non-orthogonal grids for computing accurate pressure gradient leading to loss of accuracy in regions with skewed elements; The FVM currently uses a monolithic solver. Monolithic solvers have issues dealing with the saddle-point nature of the discretized fluid equations. The result are bad convergence if direct factorization is not used and large memory consumption when direct factorization is used. These four issues are addressed in this report. In particular, we report the completion of the following task: Implementation of a weakly compressible formulation in the MOOSE Navier-Stokes module; Implementation of Moukalled’s method for including body forces in the RCI. Additionally, we identified the need to smooth the porosity using Moukalled’s face-cell smoothing operator; Implementation of a non-orthogonal correction for the Green-Gauss gradient computation; Preliminary implementation of a SIMPLE segregated solver.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1991

High order filtering methods for approximating hyperbolic systems of conservation laws

The essentially nonoscillatory (ENO) schemes, while potentially useful in the computation of discontinuous solutions of hyperbolic conservation-law systems, are computationally costly relative to simple central-difference methods. A filtering technique is presented which employs central differencing of arbitrarily high-order accuracy except where a local test detects the presence of spurious oscillations and calls upon the full ENO apparatus to remove them. A factor-of-three speedup is thus obtained over the full-ENO method for a wide range of problems, with high-order accuracy in regions of smooth flow.

Lafon, F.↗
NASA NTRS1983

The origins of Birkeland currents

Fundamental observations and zero-order theories for Birkeland currents are employed, together with recent observational data, to formulate a first-order model for the currents. Five categories of Birkeland currents are detailed, including region 1 current sheets which follow the auroral oval, region 2 currents with opposite polarity forming on the equatorward side, cusp currents poleward of region 1, currents appearing after extended periods of the interplanetary magnetic field, and a three-layer overlap of current sheets in the Harang discontinuity. The region 1 currents near noon are found to be driven by the interplanetary electric field on open field lines, while away from noon the inner edge of the plasma sheet is the source. Charge separation drives the region 2 currents, and neutralization is effected in the ionosphere. The magnetopause is concluded to be an insignificant factor for the Birkeland currents. Convection reversal is predicted to occur in the region 1 interior. Finally, four lobed polar electric fields are considered to be generated by the boundary layer dynamo, and indicate a closed magnetospheric configuration.

Stern, D. P.↗
NASA NTRS1985

Anomalous transport by Kelvin-Helmholtz instabilities

A simulation of magnetohydrodynamic Kelvin-Helmholtz instabilities has been performed for parallel and transverse configurations, modeling high latitude (or downstream flanks) and dayside low latitude magnetospheric boundaries. In the parallel configuration, a super-Alfvenic and transsonic shear flow develops into small eddies, which strongly compresses, twists, and hence amplifies the magnetic field by the dynamo action with an amplification factor of M(A)/2. In the nonlinear stage, however large the initial Alfven mach number M(A) may be, the magnetic field amplified and twisted by the hydromagnetic flow vortices reacts back upon the flow evolution, and the flow vortices cascade into smaller structures. In the transverse configuration, the instability leads to the formation of a fast shock discontinuity from an initially subfast shear flow. Anomalous tangential stress by the instability in the transverse configuration reaches 1 percent of the magnetosheath momentum flux, but for the parallel configuration, the anomalous transport is 2-3 times larger than the anomalous transport in the transverse configuration. The anomalous transport for both configurations satisfies the requirement of the viscous-like interaction at the magnetospheric boundary.

Miura, A.↗
NASA NTRS1986

Geophysical characteristics and crustal structure of greenstone terranes: Canadian Shield

Geophysical studies in the Canadian Shield have provided some insights into the tectonic setting of greenstone belts. Greenstone belts are not rooted in deep crustal structures. Geophysical techniques consistently indicate that greenstones are restricted to the uppermost 10 km or so of crust and are underlain by geophysically normal crust. Gravity models suggest that granitic elements are similarly restricted, although magnetic modelling suggests possible downward extension to the intermediate discontinuity around approx. 18 km. Seismic evidence demonstrates that steeply-dipping structure, which can be associated with the belts in the upper crust, is not present in the lower crust. Horizontal intermediate discontinuities mapped under adjacent greenstone and granitic components are not noticeably disrupted in the boundary zone. Geophysical evidence points to the presence of discontinuities between greenhouse-granite and adjacent metasedimentary erranes. Measured stratigraphic thicknesses of greenstone belts are often twice or more the vertical thicknesses determined from gravity modelling. Explantations advanced for the discrepancy include stratigraphy repeated by thrust faulting and/or listric normal faulting, mechanisms which are consistent with certain aspects of conceptual models of greenstone development. Where repetition is not a factor the gravity evidence points to removal of the root zones of greenstone belts. For one region, this has been attributed to magmatic stopping during resurgent caldera activity.

Thomas, M. D.↗
NASA NTRS1999

Friction Stir Welding for Aluminum Metal Matrix Composites (MMC's) (Center Director's Discretionary Fund, Project No. 98-09)

This technical memorandum describes an investigation of using friction stir welding (FSW) process for joining a variety of aluminum metal matrix composites (MMC's) reinforced with discontinuous silicon-carbide (SiC) particulate and functional gradient materials. Preliminary results show that FSW is feasible to weld aluminum MMC to MMC or to aluminum-lithium 2195 if the SiC reinforcement is <25 percent by volume fraction. However, a softening in the heat-affected zone was observed and is known to be one of the major limiting factors for joint strength. The pin tool's material is made from a low-cost steel tool H-13 material, and the pin tool's wear was excessive such that the pin tool length has to be manually adjusted for every 5 ft of weldment. Initially, boron-carbide coating was developed for pin tools, but it did not show a significant improvement in wear resistance. Basically, FSW is applicable mainly for butt joining of flat plates. Therefore, FSW of cylindrical articles such as a flange to a duct with practical diameters ranging from 2-5 in. must be fully demonstrated and compared with other proven MMC joining techniques for cylindrical articles.

Lee, J. A.↗
DOE OSTI2020

The effect of microstructure on the relationship between grain boundary sliding and slip transmission in high purity aluminum

The relationship between grain boundary sliding (GBS) and slip transmission is investigated experimentally at grain boundaries in 99.99% aluminum with a through-thickness, coarse grained microstructure deformed in tension at 190 °C. Using scanning electron microscope enabled digital image correlation (SEM-DIC) and electron backscatter diffraction (EBSD), high resolution strain fields and microstructural information were measured to examine the influence of microstructural neighborhoods on interactions between GBS and slip transmission and strain localization. Several distinct cases are presented that highlight important microstructural factors that govern deformation near grain boundaries. The findings include (1) direct transmission and GBS were anti-compatible and facilitated by opposing boundary types (low misorientation and high energy grain boundaries respectively); (2) increased GBS activity was correlated with decreased indirect transmission behavior; (3) GBS accommodation at triple junctions was enabled by intragranular plasticity; and (4) the local intragranular plastic strain discontinuity between grains determined the magnitude of GBS gradients. Finally, this work provides insight into the nature of these mechanisms and can be used to identify strain transfer criteria that can lead to improved GBS-sensitive crystal plasticity models.

36 MATERIALS SCIENCE↗
NASA NTRS1976

Canonical analysis for increased classification speed and channel selection

The quadratic form can be expressed as a monotonically increasing sum of squares when the inverse covariance matrix is represented in canonical form. This formulation has the advantage that, in testing a particular class hypothesis, computations can be discontinued when the partial sum exceeds the smallest value obtained for other classes already tested. A method for channel selection is presented which arranges the original input measurements in that order which minimizes the expected number of computations. The classification algorithm was tested on data from LARS Flight Line C1 and found to reduce the sum-of-products operations by a factor of 6.7 in comparison with the conventional approach. In effect, the accuracy of a twelve-channel classification was achieved using only that CPU time required for a conventional four-channel classification.

Eppler, W.↗
NASA NTRS2001

SGBEM-FEM Alternating Method for Analyzing 3D Non-Planar Cracks and Their Growth in Structural Components

The highly accurate and efficient Symmetric Galerkin Boundary Element Method (SGBEM), a Finite Element Method (FEM)-based alternating method, is proposed for analyzing three-dimensional non-planar cracks and their growth. The cracks are modeled using the symmetric Galerkin boundary element method as a distribution of displacement discontinuities, simulating an infinite medium. The finite element method only analyzes the stress for the uncracked body. The solution for the cracked structural component is determined by an iteration procedure. This process alternates between an FEM solution for the uncracked body and the SGBEM solution for a crack in an infinite body. Numerical analysis, and the Java code used, evaluate stress intensity factors and model fatigue crack growth. Examples of non-planar cracks in infinite media and planar cracks in finite bodies, as well as growth under fatigue, show the accuracy of the method.

Nikishkov, G. P.↗
DOE OSTI2021

Geophysical Monitoring Shows that Spatial Heterogeneity in Thermohydrological Dynamics Reshapes a Transitional Permafrost System

Climate change is causing rapid changes of Arctic ecosystems. Yet, data needed to unravel complex subsurface processes are very rare. Using geophysical and in-situ sensing, this study closes an observational gap associated with thermohydrological dynamics in discontinuous permafrost systems. It highlights the impact of vegetation and snow thickness distribution on subsurface thermohydrological properties and processes. Large snow accumulation near tall shrubs insulates the ground and allows for rapid and downward heat flow. Thinner snowpack above graminoid results in surficial freezing and prevents water from infiltrating into the subsurface. Analyzing short term disturbances, we found that lateral flow could be a driving factor in talik formation. Inter-annual measurements show that deep permafrost temperatures increased by about 0.2°C over two years. The results, which suggest that snow-vegetation-subsurface processes are tightly coupled, will be useful for improving predictions of Arctic feedback to climate change, including how subsurface thermohydrology influences CO 2 and CH 4 fluxes.

58 GEOSCIENCES↗
NASA NTRS1978

Magnetic fields, plasmas, and coronal holes: The inner solar system

In situ magnetic field and plasma observations within 1 AU which describe MDH stream flows and Alfvenic fluctuations, the latest theories of those phenomena are discussed. Understanding of streams and fluctuations was enhanced by the acquisition of nearly complete sets of high resolution plasma and magnetic data simultaneously at two or more points by IMPs 6, 7, and 8, Mariner-Venus-Mercury, HELIOS 1, and HELIOS 2. Observations demonstrate that streams can have very thin boundaries in latitude and longitude near the sun. This has necessitated a revision of earlier views of stream dynamics, for it is now clear that magnetic pressure is a major factor in the dynamics of stream in the inner solar system and that nonlinear phenomena are significant much closer to the sun than previously believed. Simultaneous IMP 6, 7, and 8 observations of Alfvenic fluctuations indicate that they are probably not simply transverse Alfven waves and suggest that Alfvenic fluctuations are better described as nonplanar, large-amplitude, general Alfven waves moving through an inhomogeneous and discontinuous medium, and coupled to a compressive mode.

Burlaga, L. F.↗
NASA NTRS1990

Radiative magnetized thermal conduction fronts

The evolution of plane-parallel magnetized thermal conduction fronts in the interstellar medium (ISM) was studied. Separating the coronal ISM phase and interstellar clouds, these fronts have been thought to be the site of the intermediate-temperature regions whose presence was inferred from O VI absorption-line studies. The front evolution was followed numerically, starting from the initial discontinuous temperature distribution between the hot and cold medium, and ending in the final cooling stage of the hot medium. It was found that, for the typical ISM pressure of 4000 K/cu cm and the hot medium temperature of 10 to the 6th K, the transition from evaporation to condensation in a nonmagnetized front occurs when the front thickness is 15 pc. This thickness is a factor of 5 smaller than previously estimated. The O VI column densities in both evaporative and condensation stages agree with observations if the initial hot medium temperature Th exceeds 750,000 K. Condensing conduction fronts give better agreement with observed O VI line profiles because of lower gas temperatures.

Borkowski, Kazimierz J.↗
DOE OSTI2022

Molecular Doping Increases the Semitransparent Photovoltaic Performance of Dilute Bulk Heterojunction Film with Discontinuous Polymer Donor Networks

The semitransparent and colorful properties of organic solar cells (OSCs) attract intensive academic interests due to their potential application in building integrated photovoltaics, wearable electronics, and so forth. The most straightforward and effective method to tune these optical properties is varying the componential ratio in the blend film. However, the increase in device transmittance inevitably sacrifices the photovoltaic performance because of severe carrier recombination that originates from discontinuous charge-transport networks in the blend film. In this work, a strategy is proposed via the molecular-doping strategy to overcome these shortcomings. It is discovered that p-doping is able to release the trapped holes in segregated polymer domains leading to short-circuit current enhancement, while n-doping is more effective to fill the bandgap states producing a higher fill factor. More importantly, either type of doping improves the photovoltaic performance in the semitransparent photovoltaic devices. These discoveries provide a new pathway to breaking the compromise between the photovoltaic performance and optical transmittance in semitransparent OSCs, and hold promise for their future commercialization.

14 SOLAR ENERGY↗
NASA NTRS1997

Radar Reflectivity in Wingtip-Generated Wake Vortices

This report documents new predictive models of radar reflectivity, with meter-scale resolution, for aircraft wakes in clear air and fog. The models result from a radar design program to locate and quantify wake vortices from commercial aircraft in support of the NASA Aircraft Vortex Spacing System (AVOSS). The radar reflectivity model for clear air assumes: 1) turbulent eddies in the wake produce small discontinuities in radar refractive index; and 2) these turbulent eddies are in the 'inertial subrange' of turbulence. From these assumptions, the maximum radar frequency for detecting a particular aircraft wake, as well as the refractive index structure constant and radar volume reflectivity in the wake can be obtained from the NASA Terminal Area Simulation System (TASS) output. For fog conditions, an empirical relationship is used to calculate radar reflectivity factor from TASS output of bulk liquid water. Currently, two models exist: 1) Atlas-based on observations of liquid water and radar reflectivity factor in clouds; and 2) de Wolf- specifically tailored to a specific measured dataset (1992 Vandenberg Air Force Base).

Marshall, Robert E.↗
NASA NTRS1994

Low and middle altitude cusp particle signatures for general magnetopause reconnection rate variations. 1: Theory

We present predictions of the signatures of magnetosheath particle precipitation (in the regions classified as open low-latitude boundary layer, cusp, mantle and polar cap) for periods when the interplanetary magnetic field has a southward component. These are made using the 'pulsating cusp' model of the effects of time-varying magnetic reconnection at the dayside magnetopause. Predictions are made for both low-altitude satellites in the topside ionosphere and for midaltitude spacecraft in the magnetosphere. Low-altitude cusp signatures, which show a continuous ion dispersion signature, reveal 'quasi-steady reconnection' (one limit of the pulsating cusp model), which persists for a period of at least 10 min. We estimate that 'quasi-steady' in this context corresponds to fluctuations in the reconnection rate of a factor of 2 or less. The other limit of the pulsating cusp model explains the instantaneous jumps in the precipitating ion spectrum that have been observed at low altitudes. Such jumps are produced by isolated pulses of reconnection: that is, they are separated by intervals when the reconnection rate is zero. These also generate convecting patches on the magnetopause in which the field lines thread the boundary via a rotational discontinuity separated by more extensive regions of tangential discontinuity. Predictions of the corresponding ion precipitation signatures seen by midaltitude spacecraft are presented. We resolve the apparent contradiction between estimates of the width of the injection region from midaltitude data and the concept of continuous entry of solar wind plasma along open field lines. In addition, we reevaluate the use of pitch angle-energy dispersion to estimate the injection distance.

Lockwood, M.↗
NASA NTRS1990

An upwind approach to unsteady flowfield simulation

A numerical method to determine unsteady solutions of the laminar, perfect gas Navier-Stokes equations has been developed. The structured finite-volume, approximately factored implicit scheme uses Newton subiterations to obtain the spatially and temporally second-order accurate time history of the interaction of blast-waves with stationary targets. The inviscid flux is evaluated using either of two upwind techniques, while the viscous terms are computed by central differencing. Comparisons of numerical, analytical, and experimental results are made in two and three dimensions. The results show accurate wave speed resolution and nonoscillatory discontinuity capturing.

Atwood, Christopher A.↗
NASA NTRS2019

Probabilistic Risk Assessment of Aging Layered Pressure Vessels

The National Aeronautics and Space Administration (NASA) operates approximately 300 aging layered pressure vessels that were designed and manufactured prior to ASME Boiler and Pressure Vessel (B&PV) code requirements. In order to make decisions regarding the continued fitness-for-service of these non-code carbon steel vessels, it is necessary to perform a relative risk of failure assessment for each vessel. However, risk assessment of these vessels is confounded by uncertainties and variabilities related to the use of proprietary materials in fabrication, missing construction records, geometric discontinuities, weld residual stresses, and complex service stress gradients in and around the welds. Therefore, a probabilistic framework that can capture these uncertainties and variabilities has been developed to assess the fracture risk of flaws in regions of interest, such as longitudinal and circumferential welds, using the NESSUS® probabilistic modeling software and NASGRO® fracture mechanics software. In this study, the probabilistic framework was used to predict variability in the stress intensity factor associated with different reference flaws located in the head-to-shell circumferential welds of a 4-layer and 14-layer pressure vessel. The probabilistic studies predict variability in flaw behavior and the important uncertain parameters for each reference flaw location.

Riha, D. S.↗
NASA NTRS2002

Space-Time Controls on Carbon Sequestration Over Large-Scale Amazon Basin

A major research focus of the LBA Ecology Program is an assessment of the carbon budget and the carbon sequestering capacity of the large scale forest-pasture system that dominates the Amazonia landscape, and its time-space heterogeneity manifest in carbon fluxes across the large scale Amazon basin ecosystem. Quantification of these processes requires a combination of in situ measurements, remotely sensed measurements from space, and a realistically forced hydrometeorological model coupled to a carbon assimilation model, capable of simulating details within the surface energy and water budgets along with the principle modes of photosynthesis and respiration. Here we describe the results of an investigation concerning the space-time controls of carbon sources and sinks distributed over the large scale Amazon basin. The results are derived from a carbon-water-energy budget retrieval system for the large scale Amazon basin, which uses a coupled carbon assimilation-hydrometeorological model as an integrating system, forced by both in situ meteorological measurements and remotely sensed radiation fluxes and precipitation retrieval retrieved from a combination of GOES, SSM/I, TOMS, and TRMM satellite measurements. Brief discussion concerning validation of (a) retrieved surface radiation fluxes and precipitation based on 30-min averaged surface measurements taken at Ji-Parana in Rondonia and Manaus in Amazonas, and (b) modeled carbon fluxes based on tower CO2 flux measurements taken at Reserva Jaru, Manaus and Fazenda Nossa Senhora. The space-time controls on carbon sequestration are partitioned into sets of factors classified by: (1) above canopy meteorology, (2) incoming surface radiation, (3) precipitation interception, and (4) indigenous stomatal processes varied over the different land covers of pristine rainforest, partially, and fully logged rainforests, and pasture lands. These are the principle meteorological, thermodynamical, hydrological, and biophysical control paths which perturb net carbon fluxes and sequestration, produce time-space switching of carbon sources and sinks, undergo modulation through atmospheric boundary layer feedbacks, and respond to any discontinuous intervention on the landscape itself such as produced by human intervention in converting rainforest to pasture or conducting selective/clearcut logging operations.

Smith, Eric A.↗