Search NASA⌕ Search

SEARCH · Search NASA

Results for “Disordered solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

A new halospinel superionic conductor for high-voltage all solid state lithium batteries

We report a new Li-superionic chloride, Li 2 Sc 2/3 Cl 4 , that crystallizes in a disordered spinel structure, and exhibits an ionic conductivity of 1.5 mS cm –1 with a low activation energy barrier for Li + ion diffusion of 0.34 eV. Here, this material is the first spinel-type superionic halide. Structural elucidation via powder neutron diffraction reveals a significantly disordered Li + -ion distribution over available tetrahedral and octahedral sites within the lattice, forming an infinitely 3D connected Li + ion diffusion pathway comprised of face-sharing octahedra and tetrahedra. Due to the high oxidative stability of Li 2 Sc 2/3 Cl 4 , all solid state lithium batteries employing Li 2 Sc 2/3 Cl 4 and high voltage cathodes (LiCoO 2 , LiNi 0.6 Mn 0.2 Co 0.2 O 2 or high-Ni LiNi 0.85 Mn 0.1 Co 0.05 O 2 ) – without any coating – exhibit excellent electrochemical performance up to 4.6 V in terms of capacity retention and cycle life.

25 ENERGY STORAGE↗

Localized triplons and site stuffing in the quantum dimer magnet BiYbGeO5

Thermodynamic and muon spin relaxation measurements have recently highlighted BiYbGeO5 as a new example of a rare-earth-based quantum dimer magnet with isolated Yb3+ spin-1/2 dimers. However, direct spectroscopic evidence of the triplet excitations and measurements of the structural disorder are lacking. In this work, polycrystalline BiYbGeO5 was synthesized using conventional high-temperature solid-state methods and investigated via high-resolution neutron powder diffraction and inelastic neutron scattering. Diffraction measurements down to 58 mK reveal no signatures of magnetic order and indicate that nearly 20% of Yb3+ sites are replaced by nonmagnetic Bi3+, introducing significant structural disorder. Inelastic neutron scattering shows dispersionless triplon excitations, consistent with localized, noninteracting spin dimers. Fits to the triplet excitation spectrum with an XXZ-type anisotropic exchange give 𝐽XX=0.100⁢(1)⁢meV and 𝐽Z=0.202⁢(1)⁢meV. These findings establish BiYbGeO5 as a structurally disordered but magnetically well-isolated quantum dimer system, providing a model platform for studying the resilience of entangled spin states to site dilution.

Kapoor, Rachit [Brock University, Canada]↗

Designing Advanced Electrolytes for High-Voltage High-Capacity Disordered Rocksalt Cathodes

Lithium (Li)-excess transition metal oxide materials which crystallize in the cation-disordered rock salt (DRX) structure are promising cathodes for realizing low-cost, high-energy-density Li batteries. However, the state-of-the-art electrolytes for Li-ion batteries cannot meet the high-voltage stability requirement for high-voltage DRX cathodes, thus new electrolytes are urgently demanded. It has been reported that the solvation structures and properties of the electrolytes critically influence the performance and stability of the batteries. In this study, the structure–property relationships of various electrolytes with different solvent-to-diluent ratios are systematically investigated through a combination of theoretical calculations and experimental tests and analyses. This approach guides the development of electrolytes with unique solvation structures and characteristics, exhibiting high voltage stability, and enhancing the formation of stable electrode/electrolyte interphases. These electrolytes enable the realization of Li||Li 1.094 Mn 0.676 Ti 0.228 O 2 (LMTO) DRX cells with improved performance compared to the conventional electrolyte. Specifically, Li||LMTO cells with the optimized advanced controlled-solvation electrolyte deliver higher specific capacity and longer cycle life compared to cells with the conventional electrolyte. Additionally, the investigation into the structure–property relationship provides a foundational basis for designing advanced electrolytes, which are crucial for the stable cycling of emerging high-voltage cathodes.

25 ENERGY STORAGE↗

Skyrmion fluctuations at a first-order phase transition boundary

Magnetic skyrmions are topologically protected spin textures with promising prospects for applications in data storage. They can form a lattice state due to competing magnetic interactions and are commonly found in a small region of the temperature—magnetic field phase diagram. Recent work has demonstrated that these magnetic quasi-particles fluctuate at the μeV energy scale. Here, we use a coherent x-ray correlation method at an x-ray free-electron laser to investigate these fluctuations in a magnetic phase coexistence region near a first-order transition boundary where fluctuations are not expected to play a major role. Surprisingly, we find that the relaxation of the intermediate scattering function at this transition differs significantly compared to that deep in the skyrmion lattice phase. The observation of a compressed exponential behavior suggests solid-like dynamics, often associated with jamming. We assign this behavior to disorder and the phase coexistence observed in a narrow field-window near the transition, which can cause fluctuations that lead to glassy behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Deep potential generation scheme and simulation protocol for the Li 10 GeP 2 S 12 -type superionic conductors

We report solid-state electrolyte materials with superior lithium ionic conductivities are vital to the next-generation Li-ion batteries. Molecular dynamics could provide atomic scale information to understand the diffusion process of Li-ion in these superionic conductor materials. Here, we implement the deep potential generator to set up an efficient protocol to automatically generate interatomic potentials for Li 10 GeP 2 S 12 -type solid-state electrolyte materials (Li 10 GeP 2 S 12 , Li 10 SiP 2 S 12 , and Li 10 SnP 2 S 12 ). The reliability and accuracy of the fast interatomic potentials are validated. With the potentials, we extend the simulation of the diffusion process to a wide temperature range (300 K–1000 K) and systems with large size (~1000 atoms). Important technical aspects such as the statistical error and size effect are carefully investigated, and benchmark tests including the effect of density functional, thermal expansion, and configurational disorder are performed. The computed data that consider these factors agree well with the experimental results, and we find that the three structures show different behaviors with respect to configurational disorder. Our work paves the way for further research on computation screening of solid-state electrolyte materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Asymmetric Lattice Disorder Induced at Oxide Interfaces

Control of order-disorder phase transitions is a fundamental materials science challenge, underpinning the development of energy storage technologies such as solid oxide fuel cells and batteries, ultra-high temperature ceramics, and durable nuclear waste forms. At present, the development of promising complex oxides for these applications is hindered by a poor understanding of how interfaces affect lattice disordering processes and defect transport. Here we explore the evolution of local disorder in ion-irradiated La 2 Ti 2 O 7 /SrTiO 3 thin film heterostructures using a combination of high-resolution scanning transmission electron microscopy (STEM), position-averaged convergent beam electron diffraction (PACBED), electron energy loss spectroscopy (STEM-EELS), and ab initio theory calculations. We observe highly non-uniform lattice disordering driven by asymmetric oxygen vacancy formation across the interface. Our calculations indicate that this asymmetry results from differences in the polyhedral connectivity and vacancy formation energies of the two interface components, suggesting ways to manipulate lattice disorder in functional oxide heterostructures.

24 POWER TRANSMISSION AND DISTRIBUTION↗

High voltage stable cycling of all-solid-state lithium metal batteries enabled by top-down direct fluorinated poly (ethylene oxide)-based electrolytes

Poly (ethylene oxide) (PEO)-based solid-state polymer electrolytes (SPEs) show prospects in all-solid-state lithium metal batteries. However, they suffer from low ionic conductivity at room temperature and interfacial instability with high voltage cathodes for long-term cycling. In this work, top-down fluorinated PEOs (F-PEOs) for the all-solid-state electrolytes, which are scalable and cost-effective, are developed to improve the battery performance. We demonstrate, that by enhancing the disordering of the F-PEO matrix, the SPE achieves a maximum Li + conductivity of 1.1 x 10 -4 S cm -1 at 40 °C, which is 20 times higher than the baseline. By forming robust cathode/SPE and Li/SPE interfaces, the F-PEO-based SPEs demonstrate stable cycling in the LiFePO 4 /Li and LiNi 0·8 Mn 0·1 Co 0·1 O 2 /Li (3-4.4 V, 500 cycles, capacity retention of 91.6%) based all-solid-state batteries at 40 °C. Therefore, our work highlights the significance of "disordering engineering" for energy storage materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemical order-disorder nanodomains in Fe 3 Pt bulk alloy

Chemical ordering is a common phenomenon and highly correlated with the properties of solid materials. By means of the redistribution of atoms and chemical bonds, it invokes an effective lattice adjustment and tailors corresponding physical properties. To date, however, directly probing the 3D interfacial interactions of chemical ordering remains a big challenge. In this work, we deciphered the interlaced distribution of nanosized domains with chemical order/disorder in Fe 3 Pt bulk alloy. HAADF-STEM images evidence the existence of such nanodomains. The reverse Monte Carlo method with the X-ray pair distribution function data reveal the 3D distribution of local structures and the tensile effect in the disordered domains at the single-atomic level. The chemical bonding around the domain boundary changes the bonding feature in the disordered side and reduces the local magnetic moment of Fe atoms. This results in a suppressed negative thermal expansion and extended temperature range in Fe 3 Pt bulk alloy with nanodomains. Our study demonstrates a local revelation for the chemical order/disorder nanodomains in bulk alloy. The understanding gained from atomic short-range interactions within the domain boundaries provides useful insights with regard to designing new functional compounds.

36 MATERIALS SCIENCE↗

The layered RuBr 3 –RuI 3 honeycomb system

A honeycomb layered Ru(Br 1−x I x ) 3 solid solution is prepared through a high-pressure synthesis method, with anion disorder and strong spin–orbit coupling. Their electronic and magnetic properties vary dramatically with changing chemical composition.

Materials Science↗

On the nonlinear temperature dependence of residual stresses in solid oxide fuel cells

The residual stresses in a dense yttria-stabilized zirconia (YSZ) layer bonded to a porous NiO-YSZ substrate were measured by X-ray diffraction in air between 25°C and 900°C. In this work, it was found that the residual stresses on the outer surface of the YSZ layer were compressive, that their magnitude increased with decreasing temperature, and that the temperature dependence was nonlinear particularly at temperatures below 600°C. An elastic model that incorporates micromechanics and laminate theory was formulated to successfully predicts the nonlinearity of the temperature dependence of the residual stresses by accounting for the effect of the order-disorder transition experienced by YSZ around 600°C and the magnetic transition of NiO at the Néel temperature around 265°C, on the properties of these materials. The implications of the results for the reliability of solid oxide fuel cells are discussed.

25 ENERGY STORAGE↗

Nucleation-promoting and growth-limiting synthesis of disordered rock-salt Li-ion cathode materials

Disordered rock-salt oxides and oxyfluorides are promising positive electrode materials for high-performance lithium-ion batteries free of nickel and cobalt. However, conventional synthesis methods rely on post-synthesis pulverization to achieve cycling-appropriate particle sizes, offering limited control over particle microstructure and crystallinity. This accelerates degradation and complicates secondary particle processing. Here we present a synthesis strategy that enhances nucleation while suppressing particle growth and agglomeration across various disordered rock-salt compositions, including lithium–manganese–titanium oxide, lithium–manganese–niobium oxide, and lithium–nickel–titanium oxide systems. Applied to Li 1.2 Mn 0.4 Ti 0.4 O 2 , this method yields highly crystalline, well-dispersed sub-200 nm particles that form homogeneous electrode films with stable cycling behavior. Tested in cells with lithium metal as the counter electrode, these electrodes deliver ~200 mAh/g with 85% capacity retention relative to the first cycle after 100 cycles (20 mA/g, 1.5–4.8 V), and an average discharge voltage loss of 4.8 mV per cycle, compared to 38.6% retention and 7.5 mV loss per cycle for electrodes derived from pulverized solid-state particles. This approach suggests a route to enhance the performance and durability of disordered rock-salt electrodes for sustainable lithium-ion batteries.

Batteries↗

Design of functional materials based on new principles of disorder. Final Report

Disorder is present to some extent in every material. The disorder can be sparse and localized – individual defects – or globally such as in a glass. Normally disorder is considered to be detrimental to function. However, this is not necessarily always the case. This project addressed the question: How does disorder provide new potentialities for the behavior of a material that would be absent in a crystalline material of the same composition? We have discovered a new principle for disordered matter: Independence of bond-level response. This work has introduced the possibility of creating new classes of mechanical meta-materials with applications everywhere from microscopic biological molecules (allostery) to large scale architectural disordered networks. During the course of this grant, we have subsequently elaborated on these novel ideas about bond-level independence of properties in disordered materials. In particular, this study has required that we understand the limits of disorder. That is, if crystals are perfect order, is there another diametrically opposed pole which is the most disordered state? We have shown that, in a well-defined way, jamming is one extreme disordered pole of rigid matter. Jamming is a far-from-equilibrium way of creating a rigid solid by rapidly quenching a random distribution of particles to a mechanically stable system at zero temperature. To understand the jammed state of matter, we have elucidated the low-frequency excitation of these systems. This has allowed a new way of understanding materials that cannot be easily classified as crystals or glasses. These ideas can be extended to address the mechanical properties of polycrystalline matter. Memory formation in matter can take inspiration from memory that occurs in a biological context. The issue of memory formation raises another set of questions at the heart of how the energy landscape is organized and how it can be manipulated to store information in a solid. This project has explored how to understand the degree to which multiple memories can be stored in a single system and has created a holistic understanding of how inputs can be used to create a desired response.

36 MATERIALS SCIENCE↗

Expanding the Ambient-Pressure Phase Space of CaFe 2 O 4 -Type Sodium Postspinel Host–Guest Compounds

CaFe 2 O 4 -type sodium postspinels (Na-CFs), with Na + occupying tunnel sites, are of interest as prospective battery electrodes. While many compounds of this structure type require high-pressure synthesis, several compounds are known to form at ambient pressure. Here we report a large expansion of the known Na-CF phase space at ambient pressure, having successfully synthesized NaCrTiO 4 , NaRhTiO 4 , NaCrSnO 4 , NaInSnO 4 , NaMg 0.5 Ti 1.5 O 4 , NaFe 0.5 Ti 1.5 O 4 , NaMg 0.5 Sn 1.5 O 4 , NaMn 0.5 Sn 1.5 O 4 , NaFe 0.5 Sn 1.5 O 4 , NaCo 0.5 Sn 1.5 O 4 , NaNi 0.5 Sn 1.5 O 4 , NaCu 0.5 Sn 1.5 O 4 , NaZn 0.5 Sn 1.5 O 4 , NaCd 0.5 Sn 1.5 O 4 , NaSc 1.5 Sb 0.5 O 4 , Na 1.16 In 1.18 Sb 0.66 O 4 , and several solid solutions. In contrast to earlier reports, even cations that are strongly Jahn–Teller active (e.g., Mn 3+ and Cu 2+ ) can form Na-CFs at ambient pressure when combined with Sn 4+ rather than with the smaller Ti 4+ . Order and disorder are probed at the average and local length-scales with synchrotron powder X-ray diffraction and solid-state NMR spectroscopy. Strong ordering of framework cations between the two framework sites is not observed, except in the case of Na 1.16 In 1.18 Sb 0.66 O 4 . This compound is the first example of an Na-CF that contains Na + in both the tunnel and framework sites, reminiscent of Li-rich spinels. Trends in the thermodynamic stability of the new compounds are explained on the basis of crystal-chemistry and density functional theory (DFT). Further DFT calculations examine the relative stability of the CF versus spinel structures at various degrees of sodium extraction in the context of electrochemical battery reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Local ordering in disordered Nd x Zr 1-x O 2-0.5x pyrochlore as observed using neutron total scattering

Pyrochlore complex oxides (A 2 B 2 O 7 ) are an important class of fluorite-derivative ceramics with exceptional chemical and structural versatility which make them ideal model systems for studying disordering mechanisms over a range of spatial scales. Here, neutron total scattering methods were used to analyze the structural behavior in the non-stoichiometric series Nd x Zr 1-x O 2-0.5x (0.5 ≤ x ≤ 0.23) as a function of Nd content, x. Characterization of the structure functions using Rietveld refinement and the pair distribution functions with small-box refinement reveal complex disordering pathways; the average, long-range phase changes over a very narrow compositional range from pyrochlore ($Fd\bar{3}m$) to defect fluorite ($Fm\bar{3}m$) through full randomization of the cation and anion sublattices at x ~ 0.31, while the local, short-range structure continuously adopts a weberite-type atomic arrangement (C222 1 ). Comparison to a previously studied Ho 2 Ti 2-x Zr x O 7 solid solution series reveals how changes in chemical composition and stoichiometry modify defect formation and determine how disordering progresses across different length scales in pyrochlore oxides.

36 MATERIALS SCIENCE↗

Quantum phase transitions in long-range interacting hyperuniform spin chains in a transverse field

Hyperuniform states of matter are characterized by anomalous suppression of long-wavelength density fluctuations. While most of the interesting cases of disordered hyperuniformity are provided by complex many-body systems such as liquids or amorphous solids, classical spin chains with certain long-range interactions have been shown to demonstrate the same phenomenon. Such spin-chain systems are ideal models for exploring the effects of quantum mechanics on hyperuniformity. It is well-known that the transverse field Ising model shows a quantum phase transition (QPT) at zero temperature. Under the quantum effects of a transverse magnetic field, classical hyperuniform spin chains are expected to lose their hyperuniformity. High-precision simulations of these cases are complicated because of the presence of highly nontrivial long-range interactions. We perform an extensive analysis of these systems using density matrix renormalization group simulations to study the possibilities of phase transitions and the mechanism by which they lose hyperuniformity. Even for a spin chain of length 30, we see discontinuous changes in properties like the “τ order metric” of the ground state, the measure of hyperuniformity, and the second cumulant of the total magnetization along the x-direction, all suggestive of first-order QPTs. An interesting feature of the phase transitions in these disordered hyperuniform spin chains is that, depending on the parameter values, the presence of a transverse magnetic field may lead remarkably to an increase in the order of the ground state as measured by the “τ order metric,” even if hyperuniformity is lost. Therefore, it would be possible to design materials to target specific novel quantum behaviors in the presence of a transverse magnetic field. Our numerical investigations suggest that these spin chains can show no more than two QPTs. We further analyze the long-range interacting spin chains via the Jordan-Wigner mapping onto a system of spinless fermions, showing that under the pairwise-interaction approximation and a mean-field treatment, there can be at most two quantum phase transitions. Here, based on these numerical and theoretical explorations, we conjecture that for spin chains with long-range pair interactions that have convergent cosine transforms, there can be a maximum of two quantum phase transitions at zero temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Disordered Rocksalts as High‐Energy and Earth‐Abundant Li‐Ion Cathodes

To address the growing demand for energy and support the shift toward transportation electrification and intermittent renewable energy, there is an urgent need for low‐cost, energy‐dense electrical storage. Research on Li‐ion electrode materials has predominantly focused on ordered materials with well‐defined lithium diffusion channels, limiting cathode design to resource‐constrained Ni‐ and Co‐based oxides and lower‐energy polyanion compounds. Recently, disordered rocksalts with lithium excess (DRX) have demonstrated high capacity and energy density when lithium excess and/or local ordering allow statistical percolation of lithium sites through the structure. This cation disorder can be induced by high temperature synthesis or mechanochemical synthesis methods for a broad range of compositions. DRX oxides and oxyfluorides containing Earth‐abundant transition metals have been prepared using various synthesis routes, including solid‐state, molten‐salt, and sol‐gel reactions. This review outlines DRX design principles and explains the effect of synthesis conditions on cation disorder and short‐range cation ordering (SRO), which determines the cycling stability and rate capability. In addition, strategies to enhance Li transport and capacity retention with Mn‐rich DRX possessing partial spinel‐like ordering are discussed. Finally, the review considers the optimization of carbon and electrolyte in DRX materials and addresses key challenges and opportunities for commercializing DRX cathodes.

Li-ion batteries↗

Chemical Design of Pb-Free Relaxors for Giant Capacitive Energy Storage

Dielectric capacitors have captured substantial attention for advanced electrical and electronic systems. Developing dielectrics with high energy density and high storage efficiency is challenging owing to the high compositional diversity and the lack of general guidelines. Herein, we propose a map that captures the structural distortion ($\delta$) and tolerance factor (t) of perovskites to design Pb-free relaxors with extremely high capacitive energy storage. Our map shows how to select ferroelectric with large $\delta$ and paraelectric components to form relaxors with a t value close to 1 and thus obtaining eliminated hysteresis and large polarization under a high electric breakdown. Taking the Bi 0.5 Na 0.5 TiO 3 -based solid solution as an example, we demonstrate that composition-driven predominant order-disorder characteristic of local atomic polar displacements endows the relaxor with a slushlike structure and strong local polar fluctuations at several nanoscale. This leads to a giant recoverable energy density of 13.6 J cm -3 , along with an ultrahigh efficiency of 94%, which is far beyond the current performance boundary reported in Pb-free bulk ceramics. In conclusion, our work provides a solution through rational chemical design for obtaining Pb-free relaxors with outstanding energy-storage properties.

25 ENERGY STORAGE↗

Suppressed-moment 2-k order in the canonical frustrated antiferromagnet Gd 2 Ti 2 O 7

In partially ordered magnets, order and disorder coexist in the same magnetic phase, distinct from both spin liquids and spin solids. Here, we determine the nature of partial magnetic ordering in the canonical frustrated antiferromagnet Gd 2 Ti 2 O 7 , in which Gd 3+ spins occupy a pyrochlore lattice. Using single-crystal neutron-diffraction measurements in applied magnetic field, magnetic symmetry analysis, inelastic neutron-scattering measurements, and spin-wave modeling, we show that its low-temperature magnetic structure involves two propagation vectors (2-k structure) with suppressed ordered magnetic moments and enhanced spin-wave fluctuations. Our experimental results are consistent with theoretical predictions of thermal fluctuation-driven order in Gd 2 Ti 2 O 7 , and reveal that inelastic neutron-scattering measurements on powder samples can solve the longstanding problem of distinguishing single-k and multi-k magnetic structures.

36 MATERIALS SCIENCE↗